WRT54GX2 Desktop Install - Error Message on Step 8

"the setup utility was unable to locate a wireless broadband router on your network. please make sure your wireless broaband router is powered on and all cables are properly connected"
This is the message that I recieve when I am on step 8 of trying to install my wireless router. It is extremely aggravating so anyone that can help would be greatly appreciated. Thanks

hi... please let me know the ISP details so that i can tell you step by step configuration of the router without using the CD...
thanks

Similar Messages

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

How do I fix an install error message 0x8007054f

How do I fix an install error message 0x8007054f

https://discussions.apple.com/thread/3029902?start=0&tstart=0
old link may be broken new one right here
http://support.microsoft.com/kb/946414
Just wanted to make sure you understand that if you do have question, there are the odds someone already answered it, and it wasn't me.

HT1386 I keep getting an error message during step 5 of 7 in syncing process, which tells me I have to enter my password, so I do, but it can't finish syncing. Help!!

I keep getting an error message during step 5 of 7 in syncing process, which tells me I have to enter my password, so I do, but it can't finish syncing. Help!!

What EXACTLY does the message say?

What should I do when I get failure to instal error message?

what should I do when I get a failure to install error message?

Could you please provide some more details like Product you are installing, OS details etc.

Question: i upgraded to Lion and now itune upgrade will not install (error message appears)

i upgraded to Lion and now itune upgrade will not install (error message appears)

iPhoto needs to be upgraded in order to work with Mavericks. You can do that via Software Update or the App Store.
The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
Upgrading iPhoto does not involve your iPhoto Library. Your photos will still be there. But it never hurts to make a backup first.

Can't install desktop software--error message

When I first tried to install the desktop software from the disk that came with my phone, something went wrong and the installation was incomplete. I am unable to uninstall and start over, however, because when I open the Add or Remove Programs feature in the control panel, no blackberry software comes up as an option to remove.
When I try to initiate the intallation process again (whether by disk or by download), I get the following error message in a box that says "InstallShield" at the upper left:
An error occurred while downloading the file http://saturn.installshield.com/is/prerequisites/microsoft.net framework 2.0 sp1.prq. What would you like to do?
I then have the option to retry or cancel. If I hit retry, I get the same message. If I hit cancel, I get the message:
An error occurred while downloading the file http://download.microsoft.com/download/0/8/c/08c19fa4-4c4f4ffb-9d6c-150906578c9e/NetFx20SP1_x86.exe. What would you like to do?
Again, I have to option to retry or cancel. If I hit cancel, I get the message:
The files for installation requirement Nicrosoft .NET Framework 2.0 SP1 could not be found. The installation will now stop. This is probably due to a failed, or canceled download.
This time, I can click Yes or No.
Any suggestions how I can get the desktop software installed onto my computer?
Thanks!
Annie

Yes Microsoft removed it from their site, that's why I linked to the other site where you can download it from.
In the past if the clean uninstall steps for the Desktop Manager didn't work, than the windows utility always did the trick
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

'Wi-Fi: Hardware not installed' error message, as if no modem

I am using a MacBook Air 13" late 2013 with Yosemite. I am not at home but have a valid working wifi network available in a University. Suddenly my internal modem is not recognised. What to do?
'Wi-Fi: Hardware not installed' is the error message as if it is not found.

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Quicktime not installed error message upon installation of Itunes

HI,
I have Quicktime already installed (7.7 1680.34) and I have Itunes (10.4.0.80). Now when I seek to update to the latest Itunes I receive an error message saying 'Quicktime not installed' and then it stops the installation. Same thing happens after reinstallation of Quicktime. -What to do now?
//J Sundberg

Try removing QuickTime from Control Panel before installing iTunes 10.4.1.
Check out this Apple document, if you need a walkthrough of uninstalling from Control Panel -> Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Make sure you read the detailed steps, if you run in to a problem.

I tried to download the lastest version of itunes for my windows based desktop. Error message "Apple mobile device failed to start. Verify that you have sufficient provledges to start system services." Uninstall & reinstalling itunes didn't work

Hi Communitiy.
I have a window desktop and have had itunes for ever. The latest update failed and I am getting a strange error message. "Apple mobile Device failed to start. Verify that you have sufficient privledges to start system service."
I have iphones and I am wondering if a sync of iphone and I tunes has somehow screwed up everything.
The update will not load. I have even tried uninstalling itunes and reinstalling.
I get the same exact message as before.
I am stuck as to what to try or do.

Hello Clage,
The following article provides steps that can help get the Apple Mobile Device service sorted.
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
Allen

ITunes WILL NOT install-error messages 1714,1603

I have attempted to install Itunes (various builds) and keep receiving the same error messages...1714 (older version of ITunes can not be removed)immediately followed by error 1603.
I have read every message regarding installs and have attempted to install QT on its own and then attempt to install Itunes, (no dice), uninstall and remove all references to ITunes and QuickTime in the registry (still no soap) and also use Windows Installer Remover (AND STILL no results).
I have a $400 IPod that I cannot use since I can't install Itunes.....any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Itunes will not install error message 2

I keep getting some message about something, it then rolls back, carries on, then comes up with error message 2 at the end.
Tried uninstalling and re installing, tried installing apple applications support manually, tried to edit the stuff in the registry which worked....until i plugged my phone in then itunes said my phone wasn't compatible, told me to uninstall and re install, I uninstalled and then it's back to square one, won't install again.
I don't know what else to do because all the solutions offered on here i've tried about 40 times.
Getting really fed up - this should be a simple process, not something that takes 4 hours and still isn't working.
Sort it out Apple!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

No Audio Output Device is installed error message

I have a hp pavilion m6- 1045dx and when I turned it on I noticed there was no sound and the speaker icon next to the clock in the bottom right corner had a red "x" next to it. I tried pressing the mute button, up volume, and down volume buttons and that didn't work. I've tried power cycles, uninstalling and re-installing and even downloading new drivers, checking for software changes, and checking to see if software and things pertaining to this problem were up to date (windows said yes). My frustration level is through the roof and I'm ready to get rid of this laptop. Can someone please help?

Hi ALima,
With the error message of No Audio Output Device is Installed. I have included the document 'Error in Windows 7: No Audio Output Device is installed'. Please follow through the troubleshooting steps in order for the best results.
If the above document fails to resolve the issue, I have also included 'Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices'.
Please let me know if you are still getting the same error message after troubleshooting, thank you.
I worked on behalf of HP

Desktop printer error message

I am attempting to add a desktop icon for my Officejet 6310 printer, but receive an error message that reads, "An error occurred while creating printer proxy error -5000". How can I correct this error and create the desktop icon? Thanks for any assistance you might give.

Hi Alex,
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html
10.5/10.6 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Blackberry desktop manager error message

When I install my bdm I receive an error message "Blackberry desktop manager has encountered a problem and needs to close". It carries on installing however till the end. When you try to open it, you get the same error message but then it opens up the application. The problem is that it does not detect my phone at all. I have tried every solution that I could find on the message boards - checked the USB ports (it picks up the blackberry and installs the software and charges), it is registered on the wireless network etc., etc. I am no technician so a lot of the answers went way above my head. I tried different versions of desktop manager but with the same result. What am I to do?
The error message that I get when I open up desktop manager is the following:
C\DOCUME~1\ANNELI~1\LOCALS~1\Temp\4ef7_appcompat.txt

Try the following:
Make sure your BB is not connected to the computer.
Close the desktop manager.
Go to C:\Documents and Settings\<user name>\Application data
Delete the entire Intellisync folder.
Connect your BB and open the desktop manager.
Sync your device.
~Tami~
Intellectuals solve problems; geniuses prevent them.
-- Albert Einstein

WRT54GX2 Desktop Install - Error Message on Step 8

Similar Messages

Maybe you are looking for