WRT54GX2 does not pick up time from the network...

I have a WRT54GX2 running firmware 1.01.14 and it does not pick up time from the network. I have PacBell (now AT&T) as an ISP and a DSL link. My old Netgear router picks up the time immediately. I am trying to figure out if I have a defective unit or if this is a firmware bug. Without the time, I can not use any of the scheduling functions, nor measure uptime.
Does anyone have this router with the time working? I have set the appropriate time zone.
Thanks,
Martin

mneiman wrote:
Thanks for you ideas.
The backup file appears to be binary. However in searching through it I did see 3 time related text strings, namely: clock.stdtime.gov.tw, time-b.nist.gov and time.nist.gov. I can successfully ping clock.stdtime.gov.tw and time.nist.gov. This reinforces my belief that my ISP (AT&T nee PacBell) is not blocking access.
however ntp works on TCP port 123. ping works on udp 7 afaik. if your old netgear works i guess this is a router problem.
have you reset the router yet? afaik press reset button for 10 seconds.
you will however loose all settings and need to enter them again. it may however fix the issue.Message Edited by linksysinfo on 07-09-2006 03:09 AM
Regards Simon
NAS: TS-459 Pro - 3.6.1 Build0302T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.4, TwonkyMedia 6.0.39 QPKG - Zenphoto1.4.2.1 [7802] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.4.13, Cisco SLM2008, Dlink DSM-520, Xbox360

Similar Messages

TS1398 Hi...My wifi is not working. It is not dimmed out. When I turn it on it does not pick up any of the networks around me (I know there are a lot of networks available) I have tried resetting my wifi with the steps above but it still does not work. Pl

I have the most recent update.

That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific)

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

My Macbook Air does not pick up wifi from Airport but iMac, iPad and iPhone do. Help please.

Are you testing in the same room as the TC?
Power cycle the TC.. does it show up now?
Has it ever showed up .. ie is this a problem that just started from an existing setup, or has never worked?
Is the TC new? If old how old?
If you continue to have issues.. setup the TC from iMac and preferably using ethernet.
Change the wireless names to SMB compatible ones, short no spaces, pure alphanumeric.
Use WPA2 Personal security only.
Then set the wireless channels manually.. try 11, 6, 1 for 2.4ghz and try 36 or 40 at 5ghz.
Tell us how that goes.

My iphone5 does not have any sound from the speakers ringtones or music any suggestions?

my iphone 5 does not have any sound from the speakers any suggestions on what culd be the problem and hopefully a fix

Just to add to this I can hear through the small speaker and the headphones it is just the speakers for ringtones and music etc

I have my first mac. the music folder does not appear in favourites from the finder menu so i cant transfer my itunes library

I have my first mac. I want to transfer my iTunes library from my pc but the music folder does not appear in favourites when I select finder.

Choose Home from the Finder's Go menu.
(117823)

Sql loader does not skip header rows from the second infile

Hi
I am new to Sql Loader and trying to figure out a way to load data into the table from 2 files which have different data in the same format. The files get successfully loaded into the database with just one glitch:
Its skips first 2 rows from the first file however it takes first 2 rows from the 2nd file which I do not want. Can anyone help me with this issue? How can i restrict loader from picking up the 2 header rows from the second file as well?
given below is the content of the control file
OPTIONS ( SKIP=2)
LOAD DATA
INFILE 'C:\loader\contacts\Italy_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts.bad'
DISCARDFILE 'C:\loader\contacts\contacts.dsc'
infile 'C:\loader\contacts\Spain_Wave11_Contacts.csv'
BADFILE 'C:\loader\contacts\Contacts1.bad'
DISCARDFILE 'C:\loader\contacts\contacts1.dsc'
Truncate
into table V_contacts_dump
fields terminated by ',' optionally enclosed by '"'
trailing nullcols
(ASSISTANT_EMAIL_TX,
ASSISTANT_NM,
ASSISTANT_PHONE_TX,
BUSINESS_AREA_CD,
BUSINESS_EMAIL_TX,
BUSINESS_FAX_TX,
BUYER_ROLE_CD,
COMMENTS_TX,
COUNTRY_CD,
COUNTY_STATE_PROVINCE_CD,
DATE_OF_BIRTH_DT,
DO_NOT_CALL_IN,
DO_NOT_EMAIL_IN,
DO_NOT_MAIL_IN,
DOMESTIC_PARTNERS_NM,
FIRST_NM,
FULL_NM,
GENDER_CD,
INTERESTS_CD,
LAST_NM,
MIDDLE_NM,
MOBILE_TX,
OFFICE_PHONE_TX,
OWNER_PARTY_EMAIL,
PREFERRED_CONTACT_LANG_CD,
PREFERRED_CONTACT_CD,
PRIMARY_CONTACT_IN,
REFERRED_BY_TX,
SALUTATION_CD,
STAC_SRC_ID_TX,
STAC_STDS_SRC_ID,
STCN_SRC_ID_TX,
STREET_TX,
STREET2_TX,
STREET3_TX,
SUFFIX_TX,
TITLE_CD,
TOWN_CITY_TX,
ZIP_POSTAL_CD_TX )

It would be possible to call the loader twice with only one input-File at each run.

Mail enabled list not picking up items from the drop folder.

Hi all,
I'm sorry if this has already been addressed but my searches didn't turn up anything that helped.
Our site has some mail enabled lists, that used to work and now do not. Here is a list of things I've verified and done.
1. Verified that email reaches the drop folder.
2. Verified that the list accepts messages from any sender.
3. Verified that the incoming email address is the same as the sender.
4. In Central Admin verified the settings mode is set to advanced, that the SMTP mail server for incoming mail is correct, and that the e-mail drop folder is correct.
5. Restarted the Sharepoint 2010 Timer Service.
6. Restarted the IIS server that hosts the virtual SMTP Server, and restarted the IIS server hosts sharepoint.
7. Verified that the service account has permission to the drop folder.
8. Looked through event log and found nothing.
9. Verified Microsoft SharePoint Foundation Incoming E-Mail is running.
Any help would be greatly appreciated, thanks in advance!
Update: Looking through Event Viewer an error along this line appears.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00:00.2808126. The service processed
1989 message(s) in total.
Errors occurred processing 1989 message(s):
Message ID:
The message ID is always blank.

Errors occurred processing 1989 message(s):
Message ID: <- (assume this is repeated 1988 more times.)
The following aliases sent more than five messages:
[email protected] (1950 messages)
x.x+x_=x=[email protected] (38 messages)
This looks like it's been fixed in the June Cumulative Update. If you can't update you can also manually fix this: http://blogs.msdn.com/b/george_bethanis/archive/2012/05/25/sps2010-cannot-send-incoming-emails-to-lists-libraries.aspx
June CU (needs to be installed with SP1) - http://support.microsoft.com/kb/2598348
• A document library cannot receive incoming email messages when the site collection in which the document library exists is not configured by using the site
collection quotas feature.
My CodePlex -
My Blog - My Twitter

TS2529 itunes does not let me restore from the last backup of my recently upgraded to 5.1 iphone

I recently updated from 4.2.1 to 5.1 and now itunes does not show me the "restore from the backup of..." option. It doesn't even let me restore from any backup. I found the backup in the library and made a backup of it just in case. How can I restore from this backup if Itunes doesn't give me the option?
Please help!

Welcome to the discussions,
go to iTunes/Settings and see if "Apps" is selected in General/Show:
If yes, your App folder should be listed under "library" in the left window in iTunes again.
There is no extra App folder listed when you click on your device in the device list.
German version:
Im Menü iTunes/Einstellungen/Allgemein nachschauen, ob bei "Anzeigen" die Auswahl "Apps" aktiviert ist. Danach sollte der App Ordner unter dem Punkt "Mediathek" wieder auftauchen.
Wenn das Telefon in der Geräteliste markiert ist, gibt es den App Ordner nur auf der rechten Seite.

HT4356 My iPad does not see my printer on the network. The printer says it is connected and I can ping it from my pc, but the iPad does not seem to be able to find it. I am going though an AOL supplied router, I have read this can cause issues, is this

I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it. I am using an AOL supplied router and have read reports that this can cause problems. Is this the case? How do I resolve this issue?

Hi,
That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
Bonjour Services relies on IP Multicasting which have to be supported by your network.
To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
Once the iPad connected to the Wireless Direct network try printing and check for any difference.
If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
Shlomi

Incomplete Data on report (report does not show all records from the table)

Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!

Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek

Can an iPhoto library that does not exist be recreated from the AlbumData.xml file?

Our iMac hard drive recently got corrupted and we hadn't backed up. (I know, I know, stupid, stupid, stupid. Won't make that mistake again!) The comptuer folk we took it too were able to recover most of the data on the drive, but my iPhoto library was not one of them. I don't have the library - the file is gone. But I do have the AlbumData.xml file. Is there any way to recreate the library from that file alone? I've tried it with iPhoto Library Manager and it wants me to have a default library for which this file is associated. I don't have that. Is there any way to get this data back? Some friends had trusted us with their wedding pictures. (I know, I know, stupid, stupid, and again, stupid. They won't make that mistake again!) I'd really, really, love to get them back if it's at all possible from this one file I do have.
Thanks in advance for any help!

No
iPhoto is a SQL database and you can only create the database (the iPhoto library) using a SQL editor - using iPhoto is the best
The database has many components and all of them must be there with exact names and in an exact structure to work
The only way you could rereate the library is from the photos (depending on the version of iPhoto you had they would have been in the originals or masters folder)
And yes - it is unfortuante but you have learned the most simple and basic lesson of computers - If you do not have a good current backup (I have multiple daily backups plus occasional offsite backups) you will eventually lose all of your data including your photos
LN

Mail does not show all mails from the same sender

Hello,
I have a problem with Mail - maybe an undiscovered bug? I play lotto on the free online platform www.freelotto.com. Each day freelotto sends me 6 mail receipts for any individual lotto game I took part of. The sender is always the same in each of these mails.
When I receive these mails on my iphone I got all the six mails I expected. The same on my ipad. But in Mail on my Mac (same settings) I got just four. Two mails are always missing!!! I have no idea why. The are not in the SPAM or any other folder (also not in the recycle bin). They are just missing at all. I also checked my mail provider but those two mails are not longer on the mail server. So Mail must have received them - but does not list them.
What can I do?
Regards,
Meisinotti

No one who could help?

In Flash the sound does not play only started from the beginning. Can anyone please help?

In Flash, the sound only plays if the file is started from the beginning. The sound doesn't play if starting from anywhere other than the beginning.
This is very frustrating when trying to sync the animation with the sound as it's not possible to scroll back and forward with the sound playing. The only way the sound works is if it is started from the beginning.
If anyone can help that would be fantastic.
Thanks

Hi Jeromie,
Many thanks for your help. Here is some additional information, which may shed light on the problem.
I am using Flash Professional CC 2014.0 release, Build 14.0.0.110
The computer I'm using is then iMac running OSX version 10.9.3 Build 13D65 2.7 GHz Intel Core i5
I am using Flash, not a web-based editor that leverages Flash Player.
"a direct link to the project or tool would be useful in allowing us to attempt to reproduce the problem" - Not sure how to do this, how can I add the project to the forum?
Many thanks once again for your help, let me know if you need more information.
Cheers
Michael

After installing iOS5 on my iphone 4, the camera icon does not apear every time on the lock screen

On my iPhone 4 with iOS5 the camera icon appears only intermittently on the lock screen.

I also have an iPhone 4 with the newly downloaded iOS 5. I have not been able to get the camera icon on the locked screen to appear at all. I'd love to know how to fix it since this is one of the new features that I'd really like to use.

My new LG exalt does not play my music from the sd micro card. my old phone was a LG wine III. why does it not play from my old lg wine to the new one

my

Let's get your music playing, beans3! What happens when you try to play your music from the SD card - Any error messages? Do the songs show as downloaded to your phone? Please share details so we can help.
TanishaS1_VZW
Follow us on Twitter@VZWSupport

WRT54GX2 does not pick up time from the network...

Similar Messages

Maybe you are looking for