WRT54GX2 error when connecting with a Broadcom 802.11n NIC

Every time I try and connect my Acer Ferrari 1005 built-in wireless NIC to this router I get the following error in the system log of the router:
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] Unknown QoS Action 26 (len 25)
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] Dumping 25 bytes in host order
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] 1a 00 00 00 00 00 00 00
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] 00 00 00 00 00 00 00 00
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] 00 00 00 00 00 00 00 00
Oct 31 15:58:55 (none) user.warn klogd: [0][18][2][10082879] dd [0][18][2][10082879]
Oct 31 15:58:55 (none) user.warn klogd: [0][12][3][10082879] Parse error AssocRequest, length=144 from
Oct 31 15:58:55 (none) user.warn klogd: [0][12][3][10082879] xx:xx:xx:xx:xx:xx
xx:xx:xx:xx:xx:xx is the MAC address of the NIC.
Then Windows XP fails to connect. Does anyone have any idea what the problem is or how I can diagnose it?
Thanks.

hi , hardwire the PC to the router first....then access it using http://192.168.1.1 "admin" is the password.....once in...go to the wireless section and then to "wireless network access"...Ensure that "disabled" is selected and there are no MAC addresses specified here.
let me know if this works for you.

Similar Messages

  • TNS Ora-12532 error When connecting with Db11 running in the VM

    I created a virtual machine from the PVM Entrerprise Linux 5 64 bits and db11g.
    Inside the virtual Machine the sqlplus system/manager1@VDB11 is working well.
    The tnsping 172.20.0.33 is working well too.
    But from the other external machine using oracle 11g client these command are not working: Tns Ora-12532 error.
    What to do?
    Thanks

    my virtual machine: vm1 have an static ip address 172.20.0.33
    the oracle listener is was configured with the same ip
    in the virtual machine : vm1 the /etc/hosts file content is:
    127.0.0.1 localhost.localdomain
    172.20.0.33 virtualdb11
    in the tnsnames.ora file in the virtual machine i have a service:
    VDB11 ...( host=172.20.0.33) (port=1521)
    under console connection with my virtual machine vm1 the command : sqlplus system/manager1@VDB11 is working well
    but when i working in an other external machine , where the tnsnames.ora have an entry:
    VDB11 ...(host=172.20.0.33)......
    the ping command : ping 172.20.0.33 is working well
    but sqlplus system/manager1@VDB11 is not work and return the error:
    ora-12532 tns

  • Error when connecting with sqlplus

    hello all
    I installed oracle 10g on windows xp, but whenever i try to access sqlplus through the command line it gives the following error.
    Enter user-name: oracle
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Enter user-name:
    i don't know what this means. pls help.

    hello all
    I installed oracle 10g on windows xp, but whenever i try to access sqlplus through the command line it gives the following error.
    Enter user-name: oracle
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Enter user-name:
    i don't know what this means. pls help.It seems that oracle database is not up and running. You have to start the instance. Try to startup the database and then connect. If you are a member of ora_dba group on you machine then you can startup as set oracle sid
    C:/>set ORACLE_SID=<SID> --this may there at OracleServicesSID in services of your machine.
    C:/>sqlplus /nolog
    SQL>startup
    Regards.

  • DMSConsole error when connecting with Sql Developer 3

    It's been over a month, and we can't get SQL Developer 3 to do anything useful.
    Our older Sql Developer 1.5.5 is connecting ok.
    We have no CLASSPATHs defined, and all of the other Sql/Oracle tools are running fine, including Pl/Sql Developer. And we have no problem coding Java apps in Intellij, and executing them.
    The DMS Jar
    ojdbc6dms.jar
    is located in
    c:\app\ChildeDE\product\11.2.0\client_2\sqldeveloper_3\sqldeveloper\lib\
    It's a class not found error, whenever we try any defined connection (imported from sql developer 1.1.5):
    Error connecting
    oracle/dms/console/DMSConsole
    Stack Trace:
    java.lang.NoClassDefFoundError: oracle/dms/console/DMSConsole
    ...

    Not sure how to make sense of all this. Also, the Oracle_home is already set to a folder; should this be modified in the local session, whenever sqldeveloper runs?
    TCC 14.03.59 Windows 7 [Version 6.1.7601]
    Copyright 2013 JP Software Inc. All Rights Reserved
    Registered to xxxxxx - 1 System License
    alias /r alias.lst
    rem set /r envir.lst
    [C:\Program Files (x86)\JPSoft\TCMD14]cd c:\app\ChildeDE\product\11.2.0\client_2\sqldeveloper03\sqldeveloper\sqldeveloper\bin\
    [C:\app\ChildeDE\product\11.2.0\client_2\sqldeveloper03\sqldeveloper\sqldeveloper\bin]set oracle_home
    c:\app\ChildeDE\product\11.2.0
    [C:\app\ChildeDE\product\11.2.0\client_2\sqldeveloper03\sqldeveloper\sqldeveloper\bin]sqldeveloper
    Registered TimesTen
    2013-02-08 07:46:36
    Full thread dump Java HotSpot(TM) Client VM (20.10-b01 mixed mode):
    "Keep-Alive-Timer" daemon prio=8 tid=0x3eada800 nid=0x1454 waiting on condition [0x436cf000]
    java.lang.Thread.State: TIMED_WAITING (sleeping)
    at java.lang.Thread.sleep(Native Method)
    at sun.net.www.http.KeepAliveCache.run(KeepAliveCache.java:149)
    at java.lang.Thread.run(Thread.java:662)
    "IconOverlayTracker Timer" prio=6 tid=0x3eadb000 nid=0xb60 in Object.wait() [0x437cf000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x13c660d0> (a java.util.TaskQueue)
    at java.lang.Object.wait(Object.java:485)
    at java.util.TimerThread.mainLoop(Timer.java:483)
    - locked <0x13c660d0> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:462)
    "WaitCursor-Timer" prio=6 tid=0x3ead9800 nid=0xc2c in Object.wait() [0x42a6f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x139dfa98> (a java.util.TaskQueue)
    at java.lang.Object.wait(Object.java:485)
    at java.util.TimerThread.mainLoop(Timer.java:483)
    - locked <0x139dfa98> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:462)
    "Timer queue for AWT thread" daemon prio=6 tid=0x3ead9000 nid=0x13cc in Object.wait() [0x4296f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x13285dc8> (a java.lang.Object)
    at java.lang.Object.wait(Object.java:485)
    at ice.util.awt.TimedAWTExecutor.nextElem(TimedAWTExecutor.java:108)
    - locked <0x13285dc8> (a java.lang.Object)
    at ice.util.awt.TimedAWTExecutor.runScheduler(TimedAWTExecutor.java:130)
    at ice.util.awt.TimedAWTExecutor$1.run(TimedAWTExecutor.java:19)
    "BaseTreeExplorer.NodeOpeningExecutor" prio=6 tid=0x3ead8c00 nid=0xffc waiting on condition [0x4220f000]
    java.lang.Thread.State: WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for <0x132988e8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
    at java.util.concurrent.locks.LockSupport.park(LockSupport.java:156)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1987)
    at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:399)
    at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    at java.lang.Thread.run(Thread.java:662)
    "pool-2-thread-1" prio=6 tid=0x3ead8400 nid=0x11e4 waiting on condition [0x420cf000]
    java.lang.Thread.State: WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for <0x13298a20> (a java.util.concurrent.SynchronousQueue$TransferStack)
    at java.util.concurrent.locks.LockSupport.park(LockSupport.java:156)
    at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:422)
    at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
    at java.util.concurrent.SynchronousQueue.take(SynchronousQueue.java:857)
    at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    at java.lang.Thread.run(Thread.java:662)
    "Scheduler" daemon prio=6 tid=0x3ead7c00 nid=0x4b4 in Object.wait() [0x41f8f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x13298b40> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
    at java.lang.Object.wait(Object.java:485)
    at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
    - locked <0x13298b40> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
    at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:444)
    "Thread-9" daemon prio=6 tid=0x3ead7800 nid=0x74 in Object.wait() [0x4134f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x1305bc78> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    - locked <0x1305bc78> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    at org.tmatesoft.svn.core.javahl.SVNClientImplTracker.run(SVNClientImplTracker.java:65)
    at java.lang.Thread.run(Thread.java:662)
    "TimerQueue" daemon prio=6 tid=0x3ead7000 nid=0x131c in Object.wait() [0x41a4f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x12ff6f80> (a javax.swing.TimerQueue)
    at javax.swing.TimerQueue.run(TimerQueue.java:232)
    - locked <0x12ff6f80> (a javax.swing.TimerQueue)
    at java.lang.Thread.run(Thread.java:662)
    "IconOverlayTracker Daemon" prio=6 tid=0x3ead6c00 nid=0x17e0 waiting on condition [0x415cf000]
    java.lang.Thread.State: TIMED_WAITING (parking)
    at sun.misc.Unsafe.park(Native Method)
    - parking to wait for <0x12f90b18> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
    at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:196)
    at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:2025)
    at java.util.concurrent.LinkedBlockingQueue.poll(LinkedBlockingQueue.java:424)
    at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:945)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
    at java.lang.Thread.run(Thread.java:662)
    "Thread-7" daemon prio=6 tid=0x3ead6400 nid=0x1158 runnable [0x4148f000]
    java.lang.Thread.State: RUNNABLE
    at sun.print.Win32PrintServiceLookup.notifyPrinterChange(Native Method)
    at sun.print.Win32PrintServiceLookup.access$100(Win32PrintServiceLookup.java:32)
    at sun.print.Win32PrintServiceLookup$PrinterChangeListener.run(Win32PrintServiceLookup.java:302)
    "ChangeSetService" prio=2 tid=0x3fc06400 nid=0x1034 in Object.wait() [0x4124f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x128656f0> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
    at java.lang.Object.wait(Object.java:485)
    at oracle.jdevimpl.vcs.changeset.ChangeSetService.awaitEvents(ChangeSetService.java:178)
    - locked <0x128656f0> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
    at oracle.jdevimpl.vcs.changeset.ChangeSetService.eventLoop(ChangeSetService.java:199)
    at oracle.jdevimpl.vcs.changeset.ChangeSetService.access$200(ChangeSetService.java:56)
    at oracle.jdevimpl.vcs.changeset.ChangeSetService$2.run(ChangeSetService.java:138)
    at java.lang.Thread.run(Thread.java:662)
    "Image Fetcher 2" daemon prio=8 tid=0x400d1c00 nid=0xe08 in Object.wait() [0x40eff000]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80708> (a java.util.Vector)
    at sun.awt.image.ImageFetcher.nextImage(ImageFetcher.java:114)
    - locked <0x11f80708> (a java.util.Vector)
    at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:167)
    at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
    "TimedCache-Timer" daemon prio=6 tid=0x3d82fc00 nid=0x224 in Object.wait() [0x3ee8f000]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f804c8> (a java.util.TaskQueue)
    at java.util.TimerThread.mainLoop(Timer.java:509)
    - locked <0x11f804c8> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:462)
    "JarIndex Timer" daemon prio=6 tid=0x3d809000 nid=0xe80 in Object.wait() [0x3ec4f000]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80580> (a java.util.TaskQueue)
    at java.util.TimerThread.mainLoop(Timer.java:509)
    - locked <0x11f80580> (a java.util.TaskQueue)
    at java.util.TimerThread.run(Timer.java:462)
    "AWT-EventQueue-0" prio=6 tid=0x3d7fb000 nid=0x1208 in Object.wait() [0x3e68e000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80638> (a java.awt.EventQueue)
    at java.lang.Object.wait(Object.java:485)
    at java.awt.EventQueue.getNextEvent(EventQueue.java:509)
    - locked <0x11f80638> (a java.awt.EventQueue)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:236)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
    at java.awt.Dialog$1.run(Dialog.java:1044)
    at java.awt.Dialog$3.run(Dialog.java:1096)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.awt.Dialog.show(Dialog.java:1094)
    at java.awt.Component.show(Component.java:1591)
    at java.awt.Component.setVisible(Component.java:1543)
    at java.awt.Window.setVisible(Window.java:843)
    at java.awt.Dialog.setVisible(Dialog.java:984)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
    at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
    at oracle.javatools.dialogs.ExceptionDialog.reallyShowExceptionDialog(ExceptionDialog.java:294)
    at oracle.javatools.dialogs.ExceptionDialog.showExceptionDialog(ExceptionDialog.java:229)
    at oracle.dbtools.raptor.navigator.TypeContainerFilter$ExceptionDialogRunnable.run(TypeContainerFilter.java:241)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:666)
    at java.awt.EventQueue.access$400(EventQueue.java:81)
    at java.awt.EventQueue$2.run(EventQueue.java:627)
    at java.awt.EventQueue$2.run(EventQueue.java:625)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:636)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    "Image Fetcher 3" daemon prio=8 tid=0x3d7fa000 nid=0x7c0 in Object.wait() [0x3e54f000]
    java.lang.Thread.State: TIMED_WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80708> (a java.util.Vector)
    at sun.awt.image.ImageFetcher.nextImage(ImageFetcher.java:114)
    - locked <0x11f80708> (a java.util.Vector)
    at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:167)
    at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
    "AWT-Windows" daemon prio=6 tid=0x3d7d8400 nid=0x7a8 runnable [0x3e40f000]
    java.lang.Thread.State: RUNNABLE
    at sun.awt.windows.WToolkit.eventLoop(Native Method)
    at sun.awt.windows.WToolkit.run(WToolkit.java:293)
    at java.lang.Thread.run(Thread.java:662)
    "AWT-Shutdown" prio=6 tid=0x3d7d7c00 nid=0x1380 in Object.wait() [0x3e2cf000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80818> (a java.lang.Object)
    at java.lang.Object.wait(Object.java:485)
    at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:265)
    - locked <0x11f80818> (a java.lang.Object)
    at java.lang.Thread.run(Thread.java:662)
    "Java2D Disposer" daemon prio=10 tid=0x3d7d1800 nid=0x1218 in Object.wait() [0x3e18f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f808b0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    - locked <0x11f808b0> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    at sun.java2d.Disposer.run(Disposer.java:127)
    at java.lang.Thread.run(Thread.java:662)
    "Low Memory Detector" daemon prio=6 tid=0x02514000 nid=0xc94 runnable [0x00000000]
    java.lang.Thread.State: RUNNABLE
    "C1 CompilerThread0" daemon prio=10 tid=0x02512400 nid=0x106c waiting on condition [0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Attach Listener" daemon prio=10 tid=0x02511000 nid=0x11e0 runnable [0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x0250e000 nid=0x13bc waiting on condition [0x00000000]
    java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=8 tid=0x024dd000 nid=0x13b8 in Object.wait() [0x3d06f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80b08> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
    - locked <0x11f80b08> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x024db800 nid=0x17a0 in Object.wait() [0x3cf6f000]
    java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x11f80b98> (a java.lang.ref.Reference$Lock)
    at java.lang.Object.wait(Object.java:485)
    at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
    - locked <0x11f80b98> (a java.lang.ref.Reference$Lock)
    "main" prio=6 tid=0x0254bc00 nid=0x17e4 waiting on condition [0x00000000]
    java.lang.Thread.State: RUNNABLE
    "VM Thread" prio=10 tid=0x024d7000 nid=0x1570 runnable
    "VM Periodic Task Thread" prio=10 tid=0x0252b400 nid=0x9e4 waiting on condition
    JNI global references: 3529
    Heap
    def new generation total 39424K, used 15384K [0x04a30000, 0x074f0000, 0x11f80000)
    eden space 35072K, 43% used [0x04a30000, 0x059360e0, 0x06c70000)
    from space 4352K, 0% used [0x06c70000, 0x06c70000, 0x070b0000)
    to space 4352K, 0% used [0x070b0000, 0x070b0000, 0x074f0000)
    tenured generation total 87424K, used 33812K [0x11f80000, 0x174e0000, 0x2ca30000)
    the space 87424K, 38% used [0x11f80000, 0x14085328, 0x14085400, 0x174e0000)
    compacting perm gen total 63232K, used 63214K [0x2ca30000, 0x307f0000, 0x3ca30000)
    the space 63232K, 99% used [0x2ca30000, 0x307ebab8, 0x307ebc00, 0x307f0000)
    No shared spaces configured.

  • Java error when connecting with new sql developer 3.1

    3.0 worked fine. I over-wrote the old version. so i need to see if i can find it to download.
    do i need to download a new version of java? I did the full download which included java. the install nstuctiions(on the download page just say to unzip the file.
    java.lang.NoSuchMethodError: oracle.dbtools.parser.LexerToken.parse(Ljava/lang/String;)Ljava/util/LinkedList;
         at oracle.dbtools.raptor.query.QueryUtils.matchesAnyPrefix(QueryUtils.java:349)
         at oracle.dbtools.raptor.query.QueryUtils.prependDbaVersion(QueryUtils.java:336)
         at oracle.dbtools.raptor.query.QueryUtils.getQuery(QueryUtils.java:298)
         at oracle.dbtools.raptor.query.QueryUtils.getQuery(QueryUtils.java:226)
         at oracle.dbtools.raptor.query.ObjectQueries.getQuery(ObjectQueries.java:42)
         at oracle.dbtools.raptor.navigator.xml.XmlObjectFactory.createFolderInstance(XmlObjectFactory.java:47)
         at oracle.dbtools.raptor.navigator.xml.XmlTypeOwnerInstance.listTypeFolders(XmlTypeOwnerInstance.java:74)
         at oracle.dbtools.raptor.navigator.TypeContainerFilter.loadTypeFolders(TypeContainerFilter.java:110)
         at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:160)
         at oracle.dbtools.raptor.navigator.ConnectionFilter$1.doWork(ConnectionFilter.java:104)
         at oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
         at java.util.concurrent.FutureTask.run(FutureTask.java:138)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
         at java.lang.Thread.run(Thread.java:619)

    Hi,
    For products whose install only involves an unzip, never over-write a previously installed version. From the 3.1 download page:
    To install Oracle SQL Developer 3.1 download the file, there is no in-place upgrade available, you must unzip the file into an empty folder.
    Regards,
    Gary
    SQL Developer Team

  • Sudden slow wifi connection with Airport Express 802.11n

    Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
    Thanks

    willcyrier wrote:
    Do I have to change anything on my computers?
    you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
    however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
    good luck !

  • Connecting with AirPort Extreme 802.11n

    Could someone please provide instructions in plain english, no computer jargon or techie stuff, exactly how to connect to the internet with my Airport Extreme? Apple support is no help, I cannot understand the terminology they use and my brand new MacBook doesn't seem to have all the same features that they're telling me are on it, so I don't know what to click.
    What a mistake buying this overly complex Apple product! This is my third MacBook, I hope somehow I can get this thing running!

    It's a good thing that you didn't try this with a Windows based computer!
    I suggest that you call the "Geek squad" or something similar close to your geographical location. There is absolutely no way to explain this to you without using "computer jargon or techie stuff". To configure a computer and a network you must use those terms.

  • Error when connecting to MDM from different lan

    Hi,
    I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
    Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
    PS: When I used MDM SP1 i connected to him properly in the same case.

    Hi Dmitry,
    If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
    Regards, Lev

  • Broadcom 802.11n Network Adapter not working on Windows 7 64bit

    As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium.  I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve.  This however just cropped up after two months of successful use.  Yesterday it started failing to connect to the internet, telling me that no wireless connections are available.  I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360.  I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared.  When I reboot my laptop, all I get is a notification that no networks appear in range.  If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time.  I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that 

    Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
    http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
    All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
    already connected to a wireless network on startup.
    I.a. Disable Device sleep on disconnect
    Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
    well.
    Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
    1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
    2. Double-click on Network adapters.
    3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
    4. Click on the Advanced tab.
    5. Select Device sleep on disconnect.
    6. Set the Value to Disabled. 
    7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

  • Error -2147418113 when connecting with SQL toolkit

    I have no trouble connecting with DBConnect( ) to an Access database.  However, when I try to connect to an Oracle database (Oracle73 driver), I get error -2147418113 "Catastrophic failure".  Any ideas?  Thanks.

    Hi Gris, 
    This seems to be a relatively common error when connecting to SQL databases and is not necessarily related to LabWindows/CVI. The following are several third party resources that I hope you will find helpful in your troubleshooting: 
    Microsoft Support 1
    Microsoft Support 2
    Microsoft Support 3
    There is one KnowledgeBase referring to this error when expereinced in our LabVIEW Database Connectivity that you may also find helpful: 
    Receiving Error -2147418113 "Catastrophic Failure in xxx.vi" When Using Database Connectivity Toolki...
    I hope this helps!
    Regards,
    Jackie
    DAQ Product Marketing Engineer
    National Instruments

  • TS3694 Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

    Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help

    Hi!
    It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
    Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
    Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
    What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
    To get your phone into DFU mode:
    Plug your phone into your laptop.
    Turn the phone off.
    Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
    Keep both buttons pressed down for 10 seconds.
    After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
    Now your restore should work!
    If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work!

  • Error when connecting to terminal

    Hello,
    I have a BB 8100, Desktop manager 4.6.
    Synchronization was working correctly 3-4 weeks ago.
    Today, when I tried to synchronize, I had this error message:
    0 x 80040fb3
    I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
    I tried several time to synchronize again but without success.
    Now, the situation is even worse!
    New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
    "Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
    I can not anymore try to synchronize!
    This is very strange, it never happened before.
    Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
    HELLLLP!
    Thanks
    Solved!
    Go to Solution.

    Hello RianaZaire,
    Unfortunately, I still have the same error Message.
    I have not been able to solve the situation.
    I reinstall twice the software.
    I tried to connect my Blackberry to my computer with a new cable.
    I still have the same error message.
    I don't know what to do.
    Maybe somebody will read our messages, and help us!
    Maybe this information has a link with my blackberry problem:
    I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
    Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
    For information, I also do synchronization of my adress book between my phone and TOMTOM.
    HELP HELP

  • Error when connecting to portal from some machines

    Hi all,
    Can anyone help me with this.
    I get this jserver error when connecting to portal from some
    client machines.
    I works fine from the others. Any ideas?
    This is the error I get:
    [08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
    label=73 url=http://odeceixe:81/pls/portal30/!
    PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
    [08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
    Unexpected Exception, name=content-fetcher5
    java.io.EOFException: Premature EOF encountered
         at HTTPClient.StreamDemultiplexor.read
    (StreamDemultiplexor.java, Compiled Code)
         at HTTPClient.RespInputStream.read(RespInputStream.java,
    Compiled Code)
         at java.io.InputStream.read(InputStream.java:95)
         at java.io.InputStreamReader.fill
    (InputStreamReader.java:163)
         at java.io.InputStreamReader.read
    (InputStreamReader.java:239)
         at oracle.webdb.page.ContentFetcher.run
    (ContentFetcher.java, Compiled Code)

    Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

  • Error When connecting proxy

    Hi,
    When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
                System.setProperty("ProxySet", "true");
                SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
                proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
    URL u = new URL(url);
    URLConnection uu=u.openConnection(ScrapperInterface.proxy);
    try
                    URI uuu = uu.getURL().toURI();
                    List l=ProxySelector.getDefault().select(uuu);
                    for (Iterator iter = l.iterator(); iter.hasNext(); )
                         Proxy proxy = (Proxy) iter.next();
                         System.out.println("proxy hostname : " +proxy.type());
                         InetSocketAddress add = (InetSocketAddress)proxy.address();
                         if(add == null)
                             System.out.println("No Proxy");
                         else
                             System.out.println("proxy hostname : " +add.getHostName());
                             System.out.println("proxy port : " +add.getPort());
    catch (URISyntaxException ex)
                    Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
    }Output is:
    proxy hostname : DIRECT
    No Proxy

    Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
    System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
    SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
    proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
    URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
    URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
    List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
    InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
    What you should be doing here is using the URLConnection you have already created. Not testing an address.

  • Error when working with TableView using JCA

    Hi sdns,
    I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
    Now you can throught he code which is followed by error also.
    <u>Java file.</u>
    public class DisplayComponent extends PageProcessorComponent {
         public DynPage getPage() {
              return new DisplayComponentDynPage();
         public static class DisplayComponentDynPage extends JSPDynPage {
              private JCATviewBean bean;
              public void doInitialization() {
                   IPortalComponentProfile profile =
                        ((IPortalComponentRequest) getRequest())
                             .getComponentContext()
                             .getProfile();
                   Object o = profile.getValue("myBean");
                   if (o == null || !(o instanceof JCATviewBean)) {
                        bean = new JCATviewBean();
                        profile.putValue("myBean", bean);
                   } else {
                        bean = (JCATviewBean) o;
                   // fill your bean with data here...
                   IPortalComponentRequest request =
                        (IPortalComponentRequest) this.getRequest();
                   doJca(request);
              public void doProcessAfterInput() throws PageException {
              public void doProcessBeforeOutput() throws PageException {
                   this.setJspName("Report.jsp");
              private IConnection getConnection(
                   IPortalComponentRequest request,
                   String alias)
                   throws Exception {
                   IConnectorGatewayService cgService =
                        (IConnectorGatewayService) PortalRuntime
                             .getRuntimeResources()
                             .getService(
                             IConnectorService.KEY);
                   ConnectionProperties prop =
                        new ConnectionProperties(
                             request.getLocale(),
                             request.getUser());
                   return cgService.getConnection(alias, prop);
              public void doJca(IPortalComponentRequest request) {
                   IConnectionFactory connectionFactory = null;
                   IConnection client = null;
                   String rfm_name = "BAPI_COMPANYCODE_GETLIST";
                   try {
                        try {
                             //       pass the request & system alias
                             //       Change the alias to whatever the alias is for your R/3 system
                             client = getConnection(request, "MyIDES");
                        } catch (Exception e) {
                             System.out.println(
                                  "Couldn't establish a connection with a target system.");
                             return;
    Start Interaction
                        IInteraction interaction = client.createInteractionEx();
                        IInteractionSpec interactionSpec =
                             interaction.getInteractionSpec();
                        interactionSpec.setPropertyValue("Name", rfm_name);
    CCI api only has one datatype: Record
                        RecordFactory recordFactory = interaction.getRecordFactory();
                        MappedRecord importParams =
                             recordFactory.createMappedRecord(
                                  "CONTAINER_OF_IMPORT_PARAMS");
                        IFunctionsMetaData functionsMetaData =
                             client.getFunctionsMetaData();
                        IFunction function = functionsMetaData.getFunction(rfm_name);
                        if (function == null) {
                             System.out.println(
                                  "Couldn't find " + rfm_name + " in a target system.");
                             return;
    How to invoke Function modules
                        System.out.println("Invoking... " + function.getName());
                        MappedRecord exportParams =
                             (MappedRecord) interaction.execute(
                                  interactionSpec,
                                  importParams);
    How to get structure values
                        IRecord exportStructure = (IRecord) exportParams.get("RETURN");
                        String columnOne = exportStructure.getString("TYPE");
                        String columnTwo = exportStructure.getString("CODE");
                        String columnThree = exportStructure.getString("MESSAGE");
                        System.out.println("  RETURN-TYPE    = " + columnOne);
                        System.out.println("  RETURN-CODE    = " + columnTwo);
                        System.out.println("  RETURN-MESSAGE =" + columnThree);
    How to get table values
                        IRecordSet exportTable =
                             (IRecordSet) exportParams.get("COMPANYCODE_LIST");
                        exportTable.beforeFirst();
                        // Moves the cursor before the first row.
                        while (exportTable.next()) {
                             String column_1 = exportTable.getString("COMP_CODE");
                             String column_2 = exportTable.getString("COMP_NAME");
                             System.out.println(
                                  "  COMPANYCODE_LIST-COMP_CODE = " + column_1);
                             System.out.println(
                                  "  COMPANYCODE_LIST-COMP_NAME = " + column_2);
                        //       create the tableview mode in the bean
                        bean.createData(exportTable);
    Closing the connection
                        client.close();
                   } catch (ConnectorException e) {
                        //       app.putValue("error", e);
                        System.out.println("Caught an exception: \n" + e);
                   } catch (Exception e) {
                        System.out.println("Caught an exception: \n" + e);
    <u>Bena file</u>
    package com.sap.JCA.bean;
    import java.util.Vector;
    import com.sapportals.connector.execution.structures.IRecordSet;
    import com.sapportals.htmlb.table.DefaultTableViewModel;
    import com.sapportals.htmlb.table.TableViewModel;
    public class JCATviewBean {
         public DefaultTableViewModel model;
         public TableViewModel getModel() {
         return this.model;
         public void setModel(DefaultTableViewModel model) {
         this.model = model;
         public void createData(IRecordSet table) {
    //       this is your column names
         Vector column = new Vector();
         column.addElement("Company Code");
         column.addElement("Company Name");
    //       all this logic is for the data part.
         Vector rVector = new Vector();
         try {
         table.beforeFirst();
         while (table.next()) {
         Vector data = new Vector();
         data.addElement(table.getString("COMP_CODE"));
         data.addElement(table.getString("COMP_NAME"));
         rVector.addElement(data);
         } catch (Exception e) {
         e.printStackTrace();
    //       this is where you create the model
         this.setModel(new DefaultTableViewModel(rVector, column));
    <b>JSP File:</b>
    <%@ taglib uri="tagLib" prefix="hbj" %>
    <jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
    <hbj:content id="myContext" >
      <hbj:page title="PageTitle">
       <hbj:form id="myFormId" >
       <br>
       <hbj:textView id = "tv1" text = "<b>TableView Example Using JCA</b> <br>"/>
    <hbj:tableView
        id="myTableView1"
        model="myBean.model"
        design="ALTERNATING"
        headerVisible="true"
        footerVisible="true"
        fillUpEmptyRows="true"
        navigationMode="BYLINE"
        selectionMode="MULTISELECT"
        headerText="TableView example1"
        visibleFirstRow="1"
        visibleRowCount="30"
        width="500 px"
        />
       </hbj:form>
      </hbj:page>
    </hbj:content>
    <b>Error when Executing this component:</b><u></u>
      Portal Runtime Error
    <b>An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    com/sapportals/portal/htmlb/page/PageProcessorComponent.
    Exception id: 12:21_28/10/05_0173_94105150
    See the details for the exception ID in the log file</b>  
    If anybody find the error please reply to this post.
    Regards,
    sireesha.

    Thanks for your response Martin,
    I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
    <b>Here the log file:</b>
    1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
    #1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
    #1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
    #1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
    #1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
    #1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
    #1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
    #1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
    #1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
    #1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
    #1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
    #1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
    #1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
    #1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
    #1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
    #1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
    #1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#

Maybe you are looking for

  • Two Apple IDs, one for Icloud - But can't reset the password

    I have 2 Apple IDs.  (No ide how - but I do).  Account A I can access - but I can't set it up for iCloud Account B - When I try to reset the password - it leads be back to account A When I look at My iPhone - In the iCloud setting  - it references th

  • HT201303 how to remove credit card information from account?

    I want to remove my credit card info from app store

  • Convert .txt file to .pdf using java code

    Hi, My requirement is to read the .txt file and convert it into .pdf file after changing certain text. Searched the net got a document on iText ..is it the only way for conversion or any other method....please help. Thanks in advance. Pooja

  • Examples using UTL_FILE

    Hi Where can I to find examples using UTL_FILE, wirh Read an Write, Read a file, searcha data in tables, and Write in other file

  • Weblogic.security.ldaprealmv2.LDAPRealm problem..

    Hi All, I'm running WLS6.1sp1 and I have a bit of a snag. I've been able to successfully configure WLS6.1 to authenticate against a single development LDAP server, but I'm running into problems with my production LDAP environment. My production LDAP