WRT54GX2 Not connecting through PPoE

Hi guys, I just got a new WRT54GX2, and I've tried configuring it the way I always configure my routers, but for some reason it wont connect to my PPPoE provider. I have used the username and pass. they provided, tried MAC address cloning, tried disabling wireless, and nothing works. My other router works flawlessly connects and everything using the same config, but this one doesn't even give me an error. In the status page it just shows my internet type is PPPoE, and all the IP's (default gateway, IP address) everything is just 0.0.0.0 .... I have no idea what is wrong with it, perhaps someone can help? Or should I just exchange it?
Thx in advance.

In that case you will have to configure the DSL modem to work in a BRIDGE MODE .

Similar Messages

External hard drive that is not connected through a network

Will Time Machine work with an external WD hard drive that is connected through my network at home. I plan to connect the drive via by internet router or Airport Express. Can TM use any drive that my MacBook can see? (except for my local hard drive of course)

Thanks...the cable is pretty sturdy as is--plus the drive appears in the panel in Disc Utility, just not on desktop (?). Sorry can you elaborate on SMC?
I decided to try to recover some of the data using Data Rescue II--so far not able to get it off the drive, but I've had very good success with this app in the past. I was hoping for some similar suggestion like command-T (target disc mode as with firewire hard drives) but I don't know if this works with USB drives.

IPhone not connecting through Bluetooth on iMac 21.5 inch with Nvidia 750 M

On my iMac 21.5 with Nvidia 750 M, both of my iPhones (iPhone 5s and iPhone 6) won't connect through bluetooth. I've tried disconnecting my wireless keyboard and mouse. The same connection error would pop-up. *By the way, you can talk in programmer's terms to me.*

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

Mail not connecting through proxy

I transferred all information from my previous iBook (MacOS X 10.3.9) to my new MacBook (10.4.9) over the firewire link during installation. All settings have been accurately copied.
Mail works at home, using a cable modem and DHCP. It works with the external modem. However, it will not connect at the office using internal Ethernet through a proxy on our network, while the old mail with the same settings worked fine. Now, the (new) Mail Connection Doctor says: "Mail was unable to connect to the internet, etc. Nothing I do there will make it work. Two observations:
1. Safari works fine, all the time.
2. Mail does connect to the internet: when I collect my new messages with the external modem (out of necesity) and then change back to my office configuration, Mail will not connect to my mail servers as described, but it will effortlessly collect all the images embedded in HTML messages I have already downloaded.
Help will be gratefully appreciated...
MacBook Mac OS X (10.4.9)

Hi Doc_Ski, and a warm welcome to the forums!
maybe the password to my account on the proxy is stored somewhere and all 3 browsers keep using it
Yes, it can be stored in Cookies.
Try making a new User & see if it works or asks for them.

Outlook is not connecting through Workgroup Machine over internet using Outlook Anywhere

users can connect successfully using outlook anywhere over internet if machine are on domain, well problem with workgroup machine that are not connecting over the internet as outlook keep prompting password well i have configured outlook Anywhere with
default negotiate authentication as well as ssl offloading is checked and using same name for internal and external urls. also have valid 3rd party certificate configured on server.
Talha Faraz Malik

Hi,
Step 1 :In addition to that , please use remote connectivity analyzer to check outlook anywhere in internet .
From that we came to know the exact error .
Step 2: Most of the organisations are having an ISA or TMG firewall to create web published rules for exchange services .In case if you have you need to check the rule created for outlook anywhere is properly configured or not.
If you have such kind of firewall's ,You can test the OA rule by using the option test rule in ISA or TMG firewall .
Most probably you can able to find out the exact cause with the help of EXRCA.
Please reply me if you have any queries.
Regards
S.Nithyanandham

After installation of 8.0.1 Firefox will not connect through Zone Alarm Firewall

After updating Firefox from 8.0.0 to 8.0.1, Firefox would no longer connect to either my LAN or the internet. Internet Explorer, Outlook and Ping work fine, the latest version of Chrome also will not connect. If I turn off the Zone Alarm Free firewall, everything connects again.

Your firewall is not recognizing the new version; it is just doing its job.
#Exit Firefox (''Firefox button'' > Exit or ''File > Exit'')
#Remove references to firefox and plugincontainer from your firewall list of allowed programs
#Start Firefox, let your firewall detect the new version and give permissions to allow Firefox access to the internet
'''NOTE:'''
*In ZoneAlarm 10.1.056.000, the ZA toolbar only works with Firefox 7.
*In ZoneAlarm 10.1.065.000, the ZA toolbar only works with Firefox 8.
See --> [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
Visit the ZoneAlarm forum: http://forums.zonelabs.com/index.php
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Quality Server not connect through SAP Routing String

Hi,
When remotely access client SAP through SAP routing string in Quality Server it shows error message as
"timeout occured
Location : SAP router 37.11 on solman
Time: Tue May 05 11:19:37 2009
Component : NI (Network Interface)
Release : 640
Version : 37
Return Code : -93
Counter : 131 "
Here GUI version is 7.1(where from connecting). Client SAP version is ECC 5.0 and they use GUI 6.4 version. But Development server is being connected through SAP Routing String.
Regards,
Samrat

You might want to check following things:
Can you do a ping to the IP address you specified?
Is the data correct (ip, host, system number,...)?
Is the gateway with system number 00 running on the server?
Did you install the SAP RFC SDK dll's?
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

Devices not connecting through Airport extreme wired connection

Hi
I just got an Airport extreme to use as an extention of my existing network, and to plug some devices in so that they can connect to the internet for updates (Sony Blu-ray player, dish network receiver, slingbox)...
my wireless is from a linksys/cisco wireless router (4-port) wrt310n, that is connected to my cable modem. The airport is set and has the green light showing. The blu-ray player and dishnetwork receiver are plugged into two of the ports. The blu-ray player says it can't connect to the internet. The dish network receiver says it is connected, giving ip address/submask, etc.
If I take my macbook pro and turn off wireless and plug into the airport it will not connect to the internet.
What have I not done to allow wired connection to the airport extreme to connect to the net?
thanks
David

Thanks for the clarification of your setup.
Unfortunately, the bottom line here is that this is not going to work.
The ethernet ports on the Extreme will only be active if you configure the AirPort Extreme to "extend a wireless network". But, it can only "extend" a wireless network from another Apple router. It's not compatible for this purpose with your Cisco router or any other manufacturer's router.
If you are unable to connect the AirPort Extreme to your router using an ethernet cable, you might want to take a look at a pair of ethernet powerline adapters to accomplish the same task by using the wiring in your home to transmit the ethernet signal.
I should clarify that if you connect the Cisco and AirPort Extreme using ethernet, you would not use the "extend" setting on the AirPort Extreme. This is only used if the device is connecting to another Apple router.
Message was edited by: Bob Timmons

Not connection through putty

Hi all,
My solaris 10 server is pinging , but not access through putty and Xmanager. when trying to access through putty
it shows network error.
Thanks
Rizwan Ali

What network error? Whats the error message.
Is the ssh service running?
You can tell by "svcs ssh".

HT201210 the iPhone 4 will not connect through iTunes and has extracted all data from the device

It seems like this could be an issue with the device. IT will not connect long enough to extract the data.

From the Community Ettiquette page found here.
1) Post only technical support questions and answers, unless otherwise noted.
2) Be polite, constructive and stay on topic.
3) Search for questions similar to your own before submitting a new question to the community.
I'm certain if you try option 3 you'll find relevant information on how to proceed.

Could not connect through thin driver

I am trying to connect to database through thin driver but getting the following exception :
Io exception:The Network Adapter could not establish the connection
java.sql.SQLException: Io exception : The Network Adapter could not establish the
connection at oracle.jdbc.dbacess.DBError.throwSqlException(DBError.java:168)
but I am able to coonect to the database through the oracle client and also through the odbc bridge driver.
also I am able to connect to other oracle database but not the particular.
pls if anyone can help ,suggest me what could be the possible error and solution to it.
Thank u.

I am not sure what is your URL parameter in the getConnection Method !
Check if the it is
jdbc:oracle:thin:@<ip-Add of server>:<port no>:<SID>
e.g.
jdbc:oracle:thin:@10.173.110.70:1521:cpmnc
Hope this works !
null

Time capsule not connecting through ethernet

Hey guys,
I'm having trouble configuring my time capsule as i only purchased it 2 days ago.
I have a Netgear DGN200 wireless router/modem and my plan is to turn off the wireless and use the TC as my wireless device as well as a switch to wired computers in another room but still use the Netgear as its wired to a computer. However i have my time capsule connected to a LAN port on the Netgear and connecting to the WAN port on the TC. When connected like this the port on the Netgear doesnt even like to indicate that it is connected. i know the cable is fine because i connect it straight to a computer and have full network access. I'm very confused as to why it isnt working because i have the TC in bridge mode and and have the TC connected to one of the lan ports on it.
Any help much appriciated cheers all.

The cable is through the wall then?? It can still be faulty and work on a computer if set to lower speed, eg 100mbit.. the problem on the TC is it doesn't have the ability to control the port speed in bridge mode..
Let me suggest you reset the TC.. and lock the WAN port to 100mbit full duplex.. do the connectivity leds come on.. if not use 10mbit full duplex.. and check again. Also try using a different short cable with the TC right next to the modem.. see if it then connects at full speed, which is 100mbit.

Verizon DSL modem not connecting through Linksys wrt54g

I recently switched to verizon DSL from comcast. The verizon modem when connected directly to the back of my mac works amazingly well. Now i was to be able to connect with my laptop and xbox360 wirelessly which was not a problem with comcast. So i take the Ethernet/Data/Modem cable(what ever you want to call it) from the modem and connect it to the INTERNET port on the back of the router. Then take another ETHERNET cable and connect it from the first WAN port to the back of my computer where the modem was originally directly connected. The routers internet light is on as is first ethernet light on the front of the router. And all three lights on the modem are on; internet, data, and dsl. The macintosh is now not able to connect to the internet. The laptop can connect to the network but not to the internet.(says local only) It seems like a lot of people have had this same problem but i have yet to see a solution. and again when i take the cord from the modem to the router and change it back to connecting the modem directly with the home computer (mac) the internet works fine. I know this seems very dumbed-down and a dumbed-down kind of answer is preferred. I have been fixing problems with our home network for years now and have never come across something that stumped me while the solution seems like it would be so simple.

If you have Verizon DSL and you wish to configure your router and connect the XBOX360 wirelessly, then, first thing you should do is to fully bridge your modem, then connect your modem to the internet port of the router and configure your router's internet connection type to PPPoE...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
When the router’s web-based setup page appears, click Setup then look for Internet Connection Type and select PPPoE on the drop-down arrow.
Enter the username and password that your ISP provided you in the User Name and Password fields, including the domain in the username if necessary such as [email protected] and CLick Save Settings.
Click Status then look for Login Status and check it says Connected. If it’s connected, you should be able to access the Internet.
NOTE: If the Login Status says Disconnected, click Connect, then check if you’re receiving an error message.
If you get an error meaasge follow this link
For xbox -
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
IP Address: 192.168.X.[last part of ip in your device] e.g. if static ip given to the device was 192.168.X.10 get the last part and put that to the empty box.

Store crashing on me all the time or can it not connect through proxy?

Hiya, I'm sure this is not the right place of the forum to post this, but the only place i find vaguely appropriate as there is not MacStore section yet. Well i had just read about it, got excited, updated my mac and then I started up the Mac App Store. All i get is the top bar with some of the featured apps, then i get the logo in grey in the middle and when i start the store up, it shortly for a split second brings up the bottom bar of the store. I can't log in with my ID, cant click on anything else... if i do the store hangs itself up even more. So now im pretty disappointed if it is because the app store cant run through a proxy as this is the only way i can run it in boarding school.
Can somebody tell me what i could possibly do to fix this problem!
Thanks in advance

Welcome to Apple Support Communities
+there is not MacStore section yet+
Yes there is, it's here:
http://discussions.apple.com/forum.jspa?forumID=1432

App not connected through LTE on passport: uber / slack/...

Hello, I sideloaded some apps from SNAP: uber, slack, hotel tonight...these app can't go to internet with LTE. They need wifi connection. It's a serious bug. Sounds like it comes from the OS and not from the app.
Thanks,

I had this same issue with AT&T. I upgraded from an iPhone 4S to the new iPhone 6 and it would only connect to 4G, not LTE. Additionally, the data connection would often drop out entirely, which could be remedied by cycling airplane mode. I tried resetting network settings and rebooting the phone several times, but nothing helped.
Swapping the SIM card fixed the issue on my phone. I got a new SIM from an AT&T retail store. I spent TWO HOURS in online tech support chat with an AT&T representative before they finally agreed to let me swap SIMs. I powered off the phone, put in the new SIM, powered it on, and I immediately had LTE connectivity.

WRT54GX2 Not connecting through PPoE

Similar Messages

Maybe you are looking for