WRT54GX4 not working with PDA device

I got problem with my WRT54GX4, it can not working with the PDA device, like the Windows Mobile and Nokia E61 cell phone. The computers are ok. I did upgrade the firmware to the newest 1.00.20 but it didn't help at all. Does anyone has same problem or know how to solve it?

You need to check from the PDA Device if it is showing any option for network connection or wireless connection ...
Search for wireless access point & try to connect to it ....

Similar Messages

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

Email settings DO NOT WORK WITH iOS Devices

Vz keeps sending these "important" instructions for email port settings, BUT they do not work with iOS devices--iPhones and iPads. Last go around with this I spent over 16 hours trying to reconcile until an Apple Expert discovered "special" instructions for iOS device settings. Get with the program, Verizon.

So what are the special instructions?

USB Not working with digital devices

I've been Googling for a couple of hours now, but have not yet found this problem. As of yesterday, digital devices, including two cameras (a Nikon and a Kodak) and a HP Printer individually plugged into the USB port on my Toshiba Satellite 350 are not working. All use different USB cables and I have tried various ports on the laptop.These have all worked in the past and all but he Kodak have the latest downloads from their manufacturers. Oddly, the mouse and tablet work fine. I've plugged the cameras into another computer and they seem to work. Meanwhile, I've rebooted and restarted the problematic laptop several times, I've done all the Windows updates. The machine is running Windows Vista. Your suggestions will be most welcome! Thank you! Jeffrey B

Satellite L350-16A (PSLD8E-008006FR) Satellite L350-16A (PSLD8E-007007DU) Satellite L350-16A (PSLD8E-007004BT) Minor variations of even that model may depend upon the country. According to Ahorton763 in Msg 10, the method that Sublime14 proposed in Msg 2 worked for him/her. Have you tries it? With the battery and AC adapter removed, close the Power switch for half-a-minute. After that, re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.

Airport Express Not Working with All Devices

My airport express has been working fine. All of a sudden, it stopped working with iPad and MacBook, but iMac is still working fine. Firmware is updated. What to do? Help~~~!

Which version of Windows and Service Pack is your Dell PC running?

Cisco 877 - not working with apple devices

Hello all,
I'm hoping someone can help me with a problem I have with my 877 adsl router.
A bit of background:
I have set this up as my home router to the internet, which is connected to a Linksys WRT54GL as a wireless access point.
My windows & Linux devices/laptops all work fine over this setup and connect without a problem
However, all my apple devices, phones and ipads don't fully work. I can get to google and a handful of pages, but not the store or games or facebook etc. (my daughter thinks its the end of the world - without FB and instagram)
If I take out the Cisco and put a Thompson router in, it all works fine. so I'm assuming it something with the Cisco config.
Below is the config I'm using on the router
Any pointers would be most appreciated.
ddhrouter#sh run
Building configuration...
Current configuration : 2292 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ddhrouter
boot-start-marker
boot-end-marker
enable secret 5 mysecret
no aaa new-model
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp pool CISCODHCP
   network 192.168.1.0 255.255.255.0
   dns-server 212.50.160.100 213.249.130.100 8.8.8.8
   default-router 192.168.1.1
ip name-server 212.50.160.100
ip name-server 213.249.130.100
ip name-server 8.8.8.8
username cisco privilege 15 password 0 mysecret
archive
log config
hidekeys
interface ATM0
description ** adsl interface **
mtu 1452
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 1/50
ubr 288
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
hold-queue 224 in
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
description ** local lan **
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
hold-queue 100 out
interface Dialer0
no ip address
interface Dialer10
description ** adsl dialer interface **
ip address negotiated
ip mtu 1482
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname myusername
ppp chap password 0 mypassword
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer10
no ip http server
no ip http secure-server
ip http max-connections 4
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 1 interface Dialer10 overload
ip access-list extended TerminalAccess
permit tcp host 192.168.1.0 any eq telnet
permit tcp any any eq 22
deny   tcp any any
ip access-list extended no_telnet
deny   tcp any any eq telnet
access-list 1 remark INSIDE_IF=Ethernet0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 110 permit icmp any any echo
access-list 110 permit icmp any any echo-reply
dialer-list 1 protocol ip permit
control-plane
line con 0
password password
no modem enable
line aux 0
line vty 0 4
access-class TerminalAccess in
password password
login
scheduler max-task-time 5000
end
ddhrouter#
all I'm after is a standard setup for my router. allow any out - deny any in.
Many thanks in advance.
Dave

ooo, you left your username, password, and enable in in clear text in the config you pasted, as well as not having an outside ACL applied and the VTY ACL allowing ssh from anywhere. Luckily the outside IP address isn't in the config or I'm sure someone would get ahold of your router....:) You should apply an outside access list and a firewall (I prefer CBAC firewall config for ease of use, but there is Zone based) to fix this. I assume ACL 110 was meant to be your outside ACL but it just isn't applied.
That being said Jody is likely right. PPPoE requires you to shrink your packet size (MTU/MSS) to allow room for the encapsulation that gets added to the packet. The command he supplied should fix this.
The 'ip mtu 1482' on the dialer interface may be too large as well.

USB Ports not working with specific devices

So this one has me scratching my head. My USB ports on the back of my iMac are working except for a few devices. 1 being a logitech USB receiver, and 1 being a usb mp3 player. When I plug the received into the iMac the keyboard won't work, but when I plug my USB hub into the same USB port and the receiver into the hub it works fine. The mp3 player isn't working in any usb/hub (so that's a mook point).
Here's what I've tried to resolve this issue:
1. Reset iMac
2. Reset PRAM
3. Try every usb port on the back of the iMac
None of these have fixed my issue. Plugging it into the hub isn't a huge deal, but I'd like the option to use my USB ports as I wish without having to deal with this. Anyone have advice on a solution?

It is not a matter of using your USB ports as you wish, it is a matter of what you are plugging into them and the power demands that what you plug into them makes on the system.
Not all USB ports or devices are created equal. How many ports are you using? What exactly are you plugging into the ports? What is the power demand of each item that you are plugging into each port? Are any of the USB devices self powered from their own separate power supply? Are all of the devices dependent upon the iMac for power?
It sounds to me that you have too many high power devices demanding more power through the ports than the iMac can accommodate. Is the USB hub self powered? If so, that is probably why it resolves your issue with the Logitech Unified receiver. There is very little info on this device on the Logitech website, so I could not ascertain its power demands.
Dah•veed

My ipod touch 3rd gen doesnt work on usb charger but on dock it says "Charging is not supported with this device" How do I fix it?

I'm taking it in to get it looked at but will they cover this? And is there a way to fix it before I take it in. I'm still under the 1 year warranty plan. My friend said that they might exchange it. It's a 64GB and I use it for a lot of things like my picture, music, contacts, and email. It's got scratches on the back but other wise its ok the screen isn't cracked or scratched.
I have a usb charger for it but when I plug it into the PC or my wall charger it won't charge. It just says "Charging is not supported with this device". It even says that sometimes when it's not charging. But it works on a dock station like my clock or radio.
Also my home buttom won't work unless I press down real hard. This scares me because I'm afraid I wil persss it too hard and break it even more.
Please help.

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

HT4199 I have a new iPhone 4s. I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution?? 2.4 works but is not optimal with other devices in home

I have a new iPhone 4s. I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution?? 2.4 works but is not optimal with other devices in home (computers; tivo). Have others seen this? Any advice is much appreciated.

Stephen Spark is right - your best alternative is to use a simultaneous dual band wireless router like the AirPort Extreme. Your Cisco Linksys2000 is not a dual band router, meaning that it will be constrained to operate at the slowest speed of all the devices on your network.
The AirPort Extreme's dual networks will support all your 802.11n devices as well as all your 802.11b/g devices on both the 2.4 and 5 GHz frequencies simultaneously.

This SO works with pda and samarphones.

hi, Which is the operative system for mobile devices in java?
For example for pda's there are palm and windows mobile, but there aren't java.
JavaOS for Business operating system or EmbeddedJava works with pda and smartphnes?
Is there any device(nokia,palmOne,sony,etc) with java operative system?
thank you vary much.

Welcome to the forum. If you settle a quarterly bill in full as soon as it arrives, you can then pay one-third of the regular quarterly total monthly under the Monthly Payment Plan. Settling the bill in full means that you have paid the forward charges for the next quarter, so the next 3 payments will effectively be in respect of the quarter after that. The problem with it is that the MPP has other shortcomings which will surely foul up your payments again sooner or later. Being fed up with having to sort out a balls-up every so often, I ditched my 20-odd-year-old MPP in favour of paying monthly whole bills, and to be fair it's worked seamlessly.
frane wrote:
Why can't a company as big as BT not offer their customers the option to pay their bill monthly on a date of their choice
BT have said that they will accommodate anyone paying the whole bill who has problems with their allocated direct debit date*, but there is no evidence that this has filtered down from the powers that be. I'd say go for monthly bills and get your DD date changed but I've no idea how you get that promise implemented by BT front line staff.
*See the second sentence in the email quoted in Message 123 here.
You can click the white star next to this message if you think it was helpful.

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

USB Ultranav keyboard does not work with Windows 7

Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work. I have not had problems with the keyboard functioning in XP or Vista, so it was surprising to find that it will not work with W7.
I thought all was going well when W7 recognized the Ultranav keyboard when I plugged-in the device, but all did not go as planned. I let W7 find the drivers through Windows update, but then once they didn't prove to work, I followed W7's directions of reinstalling the drivers in its version of 'Compatability Mode', but that still didn't prove to work. I would really appreciate any insights into this problem as it is one of my only (current) hesitancies about using W7.
Thank you for your time and attention to my inquiry.
Cheers,
Tsugazi

Hi, strangely enough, I got it to work. Here's the what I did differently (for those with a similar problem):
After installing W7, I plugged in my keyboard and let Windows find the drivers. When this didn't provide functionality of the ultranav devices, I tried installing the Ultranav drivers, and when Windows said there was a compatability problem, I then opted to let Windows re-install the Ultranav driver. Unfortunately, this didn't provide functionality either.
Jump ahead 12 hrs and re-install of W7 (for other reasons). This time out, I installed the Ultranav driver, THEN plugged in my keyboard. Everything works now! I don't know that this sequence will work for everyone, but it did for me.
Thanks for your comments.
Cheers,
tsugazi

APPLE TV DOES NOT WORK WITH NETFLIX

APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

It started working.....!!!!! (It seems someone back there is listening)
I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
TIPS:
I didn´t change any language or video quality configuration (scared to do so)
I changed to ethernet (cable) instead of wireless
My internet plan is 6 Megabytes (it was the same while it wasn't working)
good luck!!

My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
I am getting an error message as soon as I try to connect my Apple TV
An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
it was working fine however after the upgrde it is giving me the above error message

same here macbok air 2012 appletv 3 bugs the **** out of me
it just stops randomly after a "while"

WRT54GX4 not working with PDA device

Similar Messages

Maybe you are looking for