WRT54GX4 unable to retrieve XML files

I'm trying to retrieve XML files through a subversion network. When I try through the router WRT54GX4, I get a response that the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. I know it is not my service provider because if I connect to the service directly through my cable modem, I'm able to retrieve the files. I thought the problem was initially with the subversion network, however I ran into a similar problem in trying to download XML as part of the installation process to install the Android simulator. I have PPTP Pass through, IPSec Pass through and L2TP Pass through all enabled. Firewall protection is enabled, but I've tried the download with it disabled. Firmware version is 1.00.20. I've reset the router and started from scratch and nothing seems to work.
Any thoughts on what the problem could be?

Back again. I upgraded the firmware..now using 1.00.17 and reset the router back to the factory settings. I tried again and received the same message. Turns out the server I'm trying to access is actually hosted by a 3rd party. So I'm using VPN to tunnel into my work network, then I need to connect to go through a second VPN tunnel to get to this server. Therefore I believe that the router is unable to tunnel through to that section location. If I take the router out of the equation and connect to my modem then I can connect just fine.

Similar Messages

"Error retrieving xml file from database"

Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.

Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au

EhP1 - Unable to create XML file in Solman

Hi all,
I need some assistance
I am trying to upgrade our XI system to EhP1 - SP04. I use Maintenance Optimizer in our Solution Manager (SAP EHP 1 for SAP Solution Manager 7.0) to select the necessary files for my upgrade. The XI system has been set up in SMSY an given a Logical Component. Also, added to the Solution Landscape. I use the SAPehpi-installer to upgrade XI.
However, when I get to section three, I am supposed to provide the SMSDXML.xml file. This file is not created by our Solution Manager for some reason. The file, as I understand it, is supposed to be generated automatically during Maintenance Optimizer. But when I check the EPS and EPS/in folder of our solman, the file is not to be found. I have also checked the parameter DIR_EPS_ROOT in RZ11. It is correct. The authorization has been set to full on group Everyone, just to check if that could be the problem, but with no luck.
When I use transaction /n/tmwflow/mopz_stack i am able to view the XML file (I assume that it is the correct file), but any attempt to copy the text displayed, and to save it as an XML-file has not resulted in any success.
The only thing I have to go on, is a warning displayed in Maintenance Optimizer, stating: "Warning - No SLM configured in system - <SID>. Every document etc, Iu2019ve read sais that one can use Software Lifecycle Manager as an alternative to Download Basket. I havenu2019t seen SLM listed as a prereq, so I donu2019t believe that this could be the reason why the XML-file is not generated.
Is there some setup/configuration Iu2019ve missed?
Any help will be much appreciated!
Best Regards,
Stian
Notes checked:
1134872 FAQ for stack Delta Files
1022704 Upgrade phase EHP_INCLUSION and SPSTACK_REQUEST
1277035 Solution Manager: EHP4 product data missing

I downloaded the SPSTab.xml from SMP, but it didnt work. It gave an error: "The selected configuration file ("C:EHP1SPSTab.xml") is not usable. Reason: "Stackfile not found""
I have used the dockument in the link you provided as a basis for my upgrade. So I still need this to work in order to upgrade my XI Netweaver 7.0 to Enhancement Package 1...
In the document you provided:
Section 3 SAP Solution Manager
3.1 Support Package Level of SAP Solution Manager (Check - Mine is EHP1)
3.2 System Landscape (SMSY) of SAP Solution Manager (Check - as stated above in opening post)
3.3 SAP Solution Manager Maintenance Optimizer (Check)
3.4 SAP Solution Manager Troubleshooting: (Check)
3.4.4 No Stack Configuration File is generated: This is the core of my problem... I have read the notes listed, and run the IMG activity under Maintenance Optimizer, as per note 1134872. I get an warning stating "SAP ChaRM auto-configuration warnings" This could be the source of the problem, but in the thread Re: Message no. IMG_FASTCONF028 in Charm SolManiac says that it is nothing to worry about.
So to summarise:
I an still unable to generate XML file in Solman, and I am uable to get the XML downloaded from SMP to work with SAPehpi.
BR
Stian
(EDIT: I am however not shure if the settings under SMSY etc are 100% correct, but in my mind, that should prevent Maintenance Optimizer from generating the XML file)
Edited by: Stian Eiken on Jul 13, 2009 1:18 PM

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

How to retrieve xml file from BLOB and display on browser with css/xslt

Hi All,
I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form...
Pl. guide me.. any docs..?? Logic...??
Thanks in Advance.
Sandeep Oza

Hello Sandeep!
I'm not familiar with jsp but logic should be as follows:
-in jsp page instantiate XML parser
-load specified BLOB into parser
Now you may traverse the XML tree or you might load XSL file and use transform method to transform XML according to XSL file.
I have an example where I'm selecting XML straight from relational database and then transform it using XSL into appropriate HTML output, but it's written in PSP.
You can try http://www.w3schools.com/default.asp for basics on XML, CSS, XSL. It's easy to follow with good examples.
Regards!
miki

Sending and Retrieving XML files as soap attachments

How do I send an XML file as an attachment and then retrieve it as an XML file from soap attachment.
I am able to send it as an xml attachment but i cannot retrive it as an xml file.
Plz help me out in this regard.
Its kinda urgent...

How do I send an XML file as an attachment and then retrieve it as an XML file from soap attachment.
I am able to send it as an xml attachment but i cannot retrive it as an xml file.
Plz help me out in this regard.
Its kinda urgent...

Unable to find xml file in build release

Hi........
I have developed a dashboard application in flex
I have taken a xml file in that i put the server ip address assets/path.xml
<path>
    <server>http://coolapps.cybertech.com/geocommunicator/Incidents/GetIncidentsBetweenDates?</server>
    <image>http://coolapps.cybertech.com/geocommunicator/Incidents/GetImage/</image>
    <audio>http://coolapps.cybertech.com/geocommunicator/Incidents/GetAudio/</audio>
</path>
in main application im using this as follows
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" preinitialize="loadXML()" creationComplete="init()" xmlns:local="*"
     paddingBottom="5" paddingLeft="0" paddingTop="0" paddingRight="0"
     width="100%" height="100%" verticalGap="2" backgroundColor="#FFFFFF">
     in loadXML() im using mx.rpc.http.HTTPService, with this im giving the url path as "assets/path.xml" and getting the server IP address
     after getting IP address im saving them in AS class and binding them in main application
     in init() by using this server IP address im connecting to the remote server
     it's working fine when im running this application in Flex Builder
     but after taking the build release it's unable to locate the "assets/path.xml" file here it's giving me the fault event

Dear,
I have to create a Format tree in DMEE for HSBC Bank for belgium country.
Can you explain me how it is possible?
Rgds
Murali. N

Unable to parse xml file

public class DOMEcho1 {
     static Document document;
     static String FILE_NAME = "slideSample01.xml";
     public static void main(String[] args) {
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          Node node = null;
          try{
               DocumentBuilder builder = factory.newDocumentBuilder();
               document = builder.parse(new File(FILE_NAME));
               node = document.getParentNode();
          catch(SAXException e) {
          catch(ParserConfigurationException e) {
          catch(IOException e) {
}the XML file:
<?xml version='1.0' encoding='utf-8'?>

<slideshow
title="Sample Slide Show"
date="Date of publication"
author="Yours Truly"
>

<slide type="all">
<title>Wake up to WonderWidgets!</title>
</slide>

<slide type="all">
<title>Overview</title>
<item>Why <em>WonderWidgets</em> are great</item>
<item/>
<item>Who <em>buys</em> WonderWidgets</item>
</slide>
</slideshow>
I was unable to parse this xml file properly. When I called the method "getParentNode" it returns me a null value.
Anyone out there please guide me how to parse this xml file or advice me on the additional tasks I need to perform before I can start parsing.
Your advices will be greatly appreciated, thanks!

The documentation for getParent Node says:
All nodes, except Attr, Document, DocumentFragment, Entity, and Notation may have a parent.
I think what you want is getDocumentElement to get the root element (slideshow in your case).
Dave Patterson

c:import tag unable to load xml file

I'm using weblogic 8.1 sp5. This is how my jsp looks like:
          <%@ taglib uri="/WEB-INF/x" prefix="x" %>
          <%@ taglib uri="/WEB-INF/c" prefix="c" %>
          <c:import url="/WEB-INF/ADVLSOG6Request.xml" var="file" />
          I get an error message in the console window that says, "included resources or file "/lwise/WEB-INF/ADVLSOG6Request.xml" not found from requested resources /lwise/pages/ADVRequest.jsp"
          The xml file is under WEB-INF directory. I've even tried putting this file in the same directory as jsp i.e. /lwise/pages/ and changes the c:import tag to <c:import url="ADVLSOG6Request.xml" var="file" /> so that it can locate it but to no avail. I've tried deploying both as war module and exploded directory but still gives me the same error. I'm using JBuilder Enterprise 12 as my IDE - jsp 1.2. Any idea how can I load this class using this tag? or why it cannot see it? Thanks.

LightWorker wrote:
I haven't tried to update the firm ware yet, but this is probably my next move.
The paper says
“Unable to set attribute” error message will be displayed. Run the CameraValidator.exe utility with the “/ATTRIBUTES” flag to detect which attributes are generating errors and contact your camera vendor for a new and updated version of the camera firmware.
I've run the CameraValidator.exe but it couldn't find the camera or the attributes.
Also check the firmware version

Retrieve xml file

Weblogic Portal 9.2
How to retrieve content of xml file on JSP file using Content managemnet API.
Please provide me Content managemnet tutorial for Weblogic Portal 9.2 please
Edited by: user11311969 on Sep 8, 2009 5:49 AM

This bea sample is better than a tutorial :)
http://cid-1bd02fe33f80b8ac.skydrive.live.com/browse.aspx/Public
Basically from the node, get the property , get the value as a BinaryValue and get an InputStream from it.(but this depends on SPI
OR you can use
INodeManager nodeManager =
ContentManagerFactory.getNodeManager();
InputStream is =nodeManager.getStream(new ContentContext(), node.getId(), "binaryvalue");
should work..
i assume you want to get the XML for further processing . (otherwise there is a show binary servlet you could use)
regards
deepak

Unable to add XML files to genericObjects Folders using Webdav - cFolders

Hi All
I am not able to add XML files to genericObjects Folders using Webdav in cFolders
What could be the reason.. When I try to copy, it says "cant read from source file"
Regards,
Aby

Yes.. I downloaded the ECN.XML file from se80, edited and then used "Uplload and replace"..
Also I did the same thing to add some more vocabulary in the cfx text XML, so that it would reflect correctly to map with Additional attributes in the PDX profile.
Regards,
Aby

Unable to generate XML file

Hi Gurus,
I am generating one sample xml file in one of the designated location on the server. The xmldir directory is provided with all the necessary privileges. But when I am executing the pl/sql script for generating the xml file, it is throwing 'ORA-29285: file write error'.
Any permissions do I need to set,while googling I found there are certain permissions need to be set. But I've given full access on the directories. Please let me know what exactly is missing.
Thanks for your help in advance.
Regards
Nagendra

I am generating one sample xml file in one of the designated location on the server.How?
The xmldir directory is provided with all the necessary privileges.Which?
But when I am executing the pl/sql script for generating the xml file, it is throwing 'ORA-29285: file write error'.Show please
In my case the following is work
select * from v$version
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
conn sys@ora as sysdba
create or replace directory T as 'c:\tmp\t';
grant read, write on directory T to SCOTT;
conn scott@ora
declare
    v_filename varchar2(30);
    f_xml_file utl_file.file_type;
    v_record_data varchar2(4000) := null;
    v_empno varchar2(50) := null;
    v_ename varchar2(50) := null;
    v_job varchar2(50) := null;
    cursor cur is
      select empno, ename, job from emp;
begin
    v_FILENAME := 'to_xml_file.xml';
    f_XML_FILE := UTL_FILE.fopen('T', v_FILENAME, 'W');
    v_RECORD_DATA := '<?xml version="1.0" encoding="UTF-8"?>';
    UTL_FILE.put_line(f_XML_FILE, v_RECORD_DATA);
    UTL_FILE.put_line(f_XML_FILE, '<DATA>');
    open cur;
    loop
      fetch cur into v_empno, v_ename, v_job;
      EXIT WHEN cur%NOTFOUND;
      UTL_FILE.put_line(f_XML_FILE, ' <DETAILS>');
      utl_file.put_line(f_xml_file, ' <EMPNOTAG>' || v_empno || '</EMPNOTAG>');
      utl_file.put_line(f_xml_file,
                        ' <ENAMETAG>' || v_ename || '</ENAMETAG>');
      utl_file.put_line(f_xml_file,
                        ' <JOBATAG>' || v_job || '</JOBATAG>');
      UTL_FILE.put_line(f_XML_FILE, ' </DETAILS>');
    end loop;
    close cur;
    UTL_FILE.put_line(f_XML_FILE, '</DATA>');
    UTL_FILE.FCLOSE(f_XML_FILE);
EXCEPTION
    WHEN UTL_FILE.INTERNAL_ERROR THEN
      raise_application_error(-20500,
                              'Cannot open file :' || v_FILENAME ||
                              ', internal error; code:' || sqlcode ||
                              ',message:' || sqlerrm);
    WHEN UTL_FILE.INVALID_OPERATION THEN
      raise_application_error(-20501,
                              'Cannot open file :' || v_FILENAME ||
                              ', invalid operation; code:' || sqlcode ||
                              ',message:' || sqlerrm);
    WHEN UTL_FILE.INVALID_PATH THEN
      raise_application_error(-20502,
                              'Cannot open file :' || v_FILENAME ||
                              ', invalid path; code:' || sqlcode ||
                              ',message:' || sqlerrm);
    WHEN UTL_FILE.WRITE_ERROR THEN
      raise_application_error(-20503,
                              'Cannot write to file :' || v_FILENAME ||
                              ', write error; code:' || sqlcode ||
                              ',message:' || sqlerrm);
end;in C:\tmp\t exsist to_xml_file.xml with
<?xml version="1.0" encoding="UTF-8"?>
<DATA>
<DETAILS>
<EMPNOTAG>9999</EMPNOTAG>
<ENAMETAG>Tim</ENAMETAG>
<JOBATAG></JOBATAG>
</DETAILS>
<DETAILS>
<EMPNOTAG>7369</EMPNOTAG>
<ENAMETAG>SMITH</ENAMETAG>
<JOBATAG>CLERK</JOBATAG>
...

Unable to save xml files.

I am using frameMakker 11 and the authoring platform for the creation of S1000D xml modules withing a CSDB environment. We author in frameMaker but when we try and save we receive the following error message.
has anyone else encocuntered this and what has been done to correct it.

The file name is developed using S1000D file naming conventions as directed by the International Specification for technical Publications "s1000d_Issue_4_0
The working location we are saving to is on our local C drive.
This problem does not occur all the time and there is nothing specific that will trigger it.

Unable to Read XML files into PI 7.0

Dear Friends,
I am working on File to IDOC and IDoc to File scenario with a shared folder concept.
we have tested all our transactions to and fro with out any problem. Two days back we faced sudden server shut down due to power issue.
From that day we are facing problem in reading files into XI
We are not facing any problem during outbound transactions from SAP on the same business system, where inbound folder path is also mentioned.
I have checked in Monitoring under communication channel..
it is showing comm channal is correctly configured...
is there any way i can check where it is going wrong..
Any thoughts and suggestions is highly rewarded.
Thanks & Regards,
Suman

Hi Santhosh,
We have given full folder permissions for all users. Processed read file option is not enabled in my Sender CC.
Thanks for quick response.
Regards,
Suman

WRT54GX4 unable to retrieve XML files

Similar Messages

Maybe you are looking for