WRT56G v5 Xbox 360's on Moderate but I want it to be open

I've been having a few problems with trying to find out how to open the NAT settings for my xbox 360. How would I be able to do that?

To open the ports on your Router for XBOX 360 you can follow this link.

Similar Messages

Xbox 360 controllers : gamepad plugged but still "no devices found" ?

You have a Mac running on Lion or Mountain Lion, you have download the app http://files.tattiebogle.net/360/360ControllerInstall.dmg from :
http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/OsxDriver
You have done everything right but when you plug your gamepad (official microsoft Xbox 360 controller only, I used a wired gamepad so, I don't assure you it will work with wireless), there are still "no devices found" ?
Fortunately for you, I have finaly found a way to make it work, without buying anything else.
First, go see the following MacRumors topic :
     http://forums.macrumors.com/showthread.php?t=1327396
Follow the instructions (and when I mean follow, I mean follow exactly !)
At the 9th step, you have to enter the information about your device to make your computer recognize the information (I say it the simpler way)
Each paragraph correspond to a specific kind of device. For example :
Feedback360.plugin</string>
                                                                      </dict>
                                                                      <key>IOClass</key>
                                          <string>Xbox360ControllerClass</string>
                                                                      <key>IOKitDebug</key>
                                                                      <integer>65535</integer>
                                                                      <key>IOProviderClass</key>
                                                                      <string>IOUSBDevice</string>
                                                                      <key>idProduct</key>
                                                                      <integer>18264</integer>
                                                                      <key>idVendor</key>
                                                                      <integer>1848</integer>
                                                  </dict>
                                                  <key>BigBenController</key>
                                                  <dict>
                                           <key>CFBundleIdentifier</key>
                                                                      <string>com.mice.driver.Xbox360Controller</string>
                                                                      <key>IOCFPlugInTypes</key>
                                                                      <dict>
                                                                                          <key>F4545CE5-BF5B-11D6-A4BB-0003933E3E3E</key>
                                                                                          <string>360Controller.kext/Contents/PlugIns/
Correspond to the "BigBenController" device infomation with the product and vendor ID.
After the 10th step, copy the previously bigbencontroller paragraph, paste it between two devices (exactly like the others) and change that :
Feedback360.plugin</string>
                                                       </dict>
                                                       <key>IOClass</key>
                                          <string>Xbox360ControllerClass</string>
                                                       <key>IOKitDebug</key>
                                                       <integer>65535</integer>
                                                       <key>IOProviderClass</key>
                                                       <string>IOUSBDevice</string>
                                                       <key>idProduct</key>
                                                       <integer>yourIDProduct</integer>
                                                       <key>idVendor</key>
                                                       <integer>yourIDVendor</integer>
                                       </dict>
                                       <key>TheNameOfYourDevice</key>
                                       <dict>
                                           <key>CFBundleIdentifier</key>
                                                       <string>com.mice.driver.Xbox360Controller</string>
                                                       <key>IOCFPlugInTypes</key>
                                                       <dict>
                                                                     <key>F4545CE5-BF5B-11D6-A4BB-0003933E3E3E</key>
                                                                     <string>360Controller.kext/Contents/PlugIns/
Finish the instructions and, if everything's right, it should work

DePingus wrote:
I'm getting the same thing. Did you ever resolve this? I'm also using the wireless controller.
Also, how do I keep the green guide button from constantly blinking? And, how do you turn off the controller?
Thanks for the info!
And in case anyone cares, it works great with Cave Story. Just plug and play, no setup needed. Haven't tried it with anything else yet.
EDIT:
Found the answer to my own questions at...
http://www.gentoo-wiki.info/HOWTO_Xbox_ … controller
No info on the mouse thing tho.
Nope, haven't found any solution yet but I would love to do so! Dmesg gives:
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
input: Xbox 360 Wireless Receiver as /class/input/input6
input: Xbox 360 Wireless Receiver as /class/input/input7
input: Xbox 360 Wireless Receiver as /class/input/input8
input: Xbox 360 Wireless Receiver as /class/input/input9
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
If there is anything else needed to help me, i'll get it.
Edit:
Got it working now, use this: http://wiki.archlinux.org/index.php/Get … ns_Working guide and then it works
Last edited by korkadapa (2008-11-23 20:44:07)

Share macbook internet with xbox 360

hi i got a xbox 360 recently and i do not want to buy the expensive network adapter. i use to use a toshiba laptop to connect the xbox to internet but now i have a macbook and i need to know how to configure it. if you know how to configure your xbox 360 to share your macbooks internet connection to connect to xbox live please help me thanks.

Have a look at this YouTube Video.

Airport G5 iMac Xbox 360 wirless problem *Please Help*

Hi - I was hoping that somebody might be able to give me a few hints about how to get Xbox 360live to work on a wireless network with my G5 imac.
I want the Xbox running downstairs with the iMac upstairs. I have tested it wired and it works fine. But wireless I cannot get a connection.
Here is what I have:
Sky Broadband connection. I have a Sky wireless router. I have enabled airport on my iMac and have put the relevant info into the Internet Connect window. It indicates a strong signal. I have bought an Wireless Adapter for the Xbox 360 and attached it but it does not seem to pick up a signal when I run the test.
I moved the Xbox to the same room as the iMac to see if distance was the issue but again no connection was detected. This is when I wired it directly to the router to see if it worked this way and it does.
I really need wireless though so please if anybody has cracked this problem let me know.
Cheers
Martin

Since your iMac is able to get a good wireless signal, you know the 2Wire wireless router is working properly. On the other hand, the XBox wireless adapter under the same conditions sees absolutely no signal. My conclusion from this would be that either (a) the XBox wireless adapter is not functional, or (b) you are making some fundamental error in setup of the adapter.
Since this is a wireless networking problem between two non-Apple products, you might see if product support for your XBox wireless adapter can provide further assistance.

Wireless router/Print Server w/ Ethernet Xbox 360

Hey yall,
So I'm on day 2 of my new life as a "Mac guy". Threw down on a G5 and am pretty stoked. Still stock - I'm going to get another GB of RAM and AppleCare soon - and I'm also looking to get everything running wirelessly, including my HP PSC 1510 printer. I currently have Qwest DSL (1.5MB down), which I have configured wirelessly but don't have the router to print wirelessly. I have a 1-bdrm cabin w/ a loft, so I'd like to have the router/printer upstairs and just this pimp machine downstairs for all to see. I also have a Xbox 360 upstairs that I'd like to be able to connect via Ethernet to the router. The Airport Extreme BS would work - but it's 2 bills. Would this US Robotics Router w/ Print Server work?
http://accessories.us.dell.com/sna/ProductDetail.aspx?TabPage=overview&sku=A0474 840&c=us&l=en&cs=19
I'd want to be able to return my rented router to Qwest - would this be one-stop shopping for me? Run internet/print service to the G5 downstairs and hardwire in my 360 upstairs? If so, that would be sweet. Also, the router says any USB printer would work - is that true? The HP PSC 1510 ain't exactly high-end - but I've also not opened it yet and would return it to get something that would work. Thanks a lot for any help, this fruity computer is pretty sweet!!
soulsurfer9
gravity rides everything
iMac G5 2.1 GHz w/ iSight

Hello,
Congratulations on your new Mac! My setup is similar to your own. I have my computer (iMac G5) hooked up wirelessly and I provide internet to my PS2 from the LAN hookup on the router.
I'm sorry that I can't give you an answer to the usefulness of the US Robotics router but, I can give you my experience with an Airport Express Base Station. I was fortunate enough to get one as a gift for Christmas and have been up and running ever since. ^^
First and foremost the Airport Express Base Station or AEX is Apple made and quite frankly works the best with your computer. You can plug your printer into it and also share your internet with your XBox 360 through the Ethernet port.
Though not as expensive as the Airport Extreme Base Station it is still about twice as expensive as the US Robotics one you labeled in your post. That is my setup in a nutshell except I don't have the XBox 360. ;p (jealous)
I just wanted to provide you a tested and tried solution that works. Good luck and wish you the best with your new setup. I know you are going to enjoy it and I agree about showing off your iMac, they are sweet looking.
Best Regards,
Jason
iMac G5 (iSight) Mac OS X (10.4.4) 12' Powerbook, 5G iPod

Playing Xbox 360 on MacBook

Hello, I was wondering if there was a cable that plugs into the MacBook that have A/V inputs for something like Xbox 360.
Thanks,
Christian

No, but someone made an notebook out of his Xbox 360..
http://benheck.com/Games/Xbox360/x360page1.htm

Router xbox 360 issues

Ok heres my problem, I'm trying to connect to Xbox live using a wireless router. Now i dont know what i'm missing so hopefully someone can help me out. The 360 detects the network, it starts to connect and does then it goes to the third test, the ip address and for whatever reason it doesnt work and it flips back to the second test and says its not connected. So what is it thats missing for the ip address, do i have to change the address on the 360 to match the wireless router?

Are you using mac address filtering, if so make sure you've added both the mac address of the wireless device and the xbox 360. I'm having a similar problem even though I've added both mac addresses, mine works fine when the mac address filtering is disabled but as soon as I enable it the xbox 360 loses its connection but everything else on my system is OK.
HTH

Connecting my xbox 360 (elite) to my macbook pro?

I recently got a Macbook pro for christmas, and was wondering if there was anyway that I could connect my xbox 360 elite to it. I want to use the my macbook screen as a screen for my 360, at least until I can afford a new TV (roommate knocked my 32" samsung off its stand and broke it christmas day...).
I heard there is a VGA coord from microsoft that connects from a vga port to the back of the xbox, and i have the DVI to VGA adapter for the mac already. Was just making sure this works before I spend the $50.
Thanks!

Broschati,
No, this won't work. The DVI port on your Macbook Pro is for video out. The Macbook Pro's display is connected directly to the GPU, and there is no way to input video to it.
Scott

WRT54G 2.2- Xbox 360's NAT setting is Moderate, please help!

Ok, here's the story...normally i always have the 360's network settings to 'automatic' , but since the new Live update i've been having lots of trouble, like : I try to start a private chat with someone, but the person isn't able to join me or when i try to join their chat/party it doesn't work.
However, just now when that person was already in a party with someone, i WAS able to join...but as soon as i get an invite from that person when he's got no one else in the party...it doesn't work.
So i started to check the net for advice...and i found another forum where they said i had to do a few things.
http://www.portforward.com/networking/staticip.htm
I made a static IP for Vista and Xbox 360. And finally this
http://www.portforward.com/english/routers/port_forwarding/Linksys/WRT54G/Xbox_Live_360.htm
Then i test the Live connection, and everything is fine it seems, but at the end i receive an error about how my NAT is Moderate. It then gives suggestions such as, to check if you have enabled UpnP on the router...which i have. It advices you to turn off the router and/or modem for a few minutes...nothing of that makes a change here sadly.
That forum also told me to open these ports.
Port: 1900
Naam: UPnP Framework
Protocol: UDP
Scope: My network (subnet) only
Port: 2290
Naam: Remote Media Center Experience
Protocol: TCP
Scope: Any computer (including those on the Internet)
Port: 3376
Naam: Media Center Extender Service
Protocol: UDP
Scope: Any computer (including those on the Internet)
Port: 5555
Naam: Media Streaming (Media Connect)
Protocol: TCP
Scope: My network (subnet) only
Port: 7777
Naam: Network Validation
Protocol: UDP
Scope: My network (subnet) only
and put them here
http://www.portforward.com/english/routers/port_forwarding/Linksys/WRT54G/WRT54G4.jpg
Everything all fine and dandy...the problem though is..what do i fill in as the last few numbers of their IP adresses? Here it looks like this now
http://img224.imageshack.us/img224/9774/29330189nt9.jpg

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...
3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
4) Click on set-up and change the MTU Size to 1452 and click Save Settings...
5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
6) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
7) Turn off your modem, router, and Xbox...Wait for a minute...
8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Thinking of buying an Xbox 360, but not sure if I'll be able to connect...

So, as the title says, I'm thinking of trying to get an Xbox 360, but I don't know if I'll be able to connect wirelessly to our Time Capsule with the Microsoft Xbox 360 Wireless Network Adapter.
I've been reading the most recent threads on here that I could, and some say you can connect wirelessly now as of July and the 7.3.2 update, yet other threads say it doesn't work. What should I believe? I really don't want to spend the $400+ on the Xbox, only to find I can't take it online.
Does the Microsoft wireless adapter connect to the Time Capsule yet? Or if it doesn't, what would be my best bet for a wireless adapter?
Thanks in advance to anyone who can help me out with this.

hello.
i have a similar question. i have a 360 in my basement. my imac and modem and router are upstairs on the first floor. the 360 has a ethernet cable that comes with it. can i use that and purchase an airport express to connect to the network? After plugging the ethernet cable into the airport express, would that work? Or would I need more hardware (sorry if I seem computer illiterate, but i'm not familiar with networking)?
ive been reading these forums and a lot of people say that they have time capsule or airport base station. do i need these too in order to connect to the internet, even though I already have a Linksys wireless router? Any help will be appreciated.
Thanks,
bluesee06

I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

I have exactly the same problem.
I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
What the **** Is The Microsoft Deal with all of this!?!?
PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
If anyone has a link, it would be appreciated.
Message was edited by: nostrawaggus

How to swtich my NAT type to moderate, 2 xbox 360s

I cant play xbox live with my brother and friends because it says my nat type is strict. Can you guys switch it to moderate? Both of our xboxes are using the same wifi. I have a 2wire 3801HGV.UPDATE: I edited my setting on the residential gateway thing, chose my ip address, etc and now my xbox is telling me my nat type is moderate but my brother's xbox is strict. gonna see if i can play with him but if not how do i get it so both are moderate?

pajarito2015 wrote:
I cant play xbox live with my brother and friends because it says my nat type is strict. Can you guys switch it to moderate? Both of our xboxes are using the same wifi. I have a 2wire 3801HGV.
UPDATE: I edited my setting on the residential gateway thing, chose my ip address, etc and now my xbox is telling me my nat type is moderate but my brother's xbox is strict. gonna see if i can play with him but if not how do i get it so both are moderate?
Nope, only 1 xbox can connect to the 2wire unit at one time. Other users have added a router behind the RG to connect more xboxs.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Ps3 and Xbox 360 already asked many times but no solution works

Hi,
first of all I'd like to share with all of you my real disappoint for having bought this Airport Extreme Base Station. I really hope that someone at Apple will read my post and come to my house because I would have just a few words to tell them.
After 4 years of proficuous cooperation my Netgear WI-Fi router left me and I immediately thought to replace it with an Apple product just to be sure that it would have been easy to install and on top of performances.
I chose the Airport Extreme which is much more expensive than quite all the other same product but I didn't care about it because I would have brang home an excellent product.....or...at least I thought it !
Once in my room the soap opera began. I'm not a genius but I consider myself a medium skilled user and, in any case, even it is not my real job, I configured many bigger LANs than my personal ones and I never had such kidn of problem.
I read many posts where people were asking for information because they couldn't connect their Airport Extreme to their PS3 or Xbox 360 but I never had such kind of problem. It really worked immediately and both consoles worked in few moments.
My REAL problem is that both of them are terribly slow and I can't do anything online. I can't see streming videos, I can't play online and I can't neither play videos that are on a LAN DLNA server !!!!! It takes about 35 seconds to play a video and some times it has to stop for empty buffering reason. This is really unacceptable.
I tried so many configurations and nothing changed and I also took a look at some guides but they had been written with old firmwares so they are quite unuseful for me.
After having asked a friend of mine to give me his router (a Netgear ones) for some days I finally made myself sure that the problem is the Airport Extreme.
It also has a very poor signal because my iPhone has difficulties to keep the connection in areas where my old router worked fully.
If only I could turn back time I'd never buy it again but now, having spent to useless my money, could you please let me know a working configuration for the latest firmware 7.4.2 ? I tried to use the previous firmware but I have the same problems.
There is only a wall separating the Airport Extreme from the PS3 and Xbox and both of them get a 100% of signal but I really don't know what to do.
Thanks for all the help you could provide me.
Bye.
Christian

Sorry but I have no way to measure the actual throughput for any of my devices (I have 2 Xboxes which have the same problem and even my iPhone suffer of a bad connection).
In any case I really can't understand why the connection is so bad. I can even get in touch with my ISP to ask them if there is some problem with the connection (maybe a coincidence and the Airport Extreme has nothing to do with it ?????) but the facts remain: even my DLNA server and PS3 connection is slow and I can't clearly see the movies I have in my intenal LAN and also the iPhone show a poor connection to the Airport Extreme and it is because of the Extreme for sure.
I really don't know what to do.

Just got the WRE for my Xbox 360 but I am having problems

Hello everyone, I just got my first WRE today. I auto configured it and I now have 2 solid blue lights. I have a Linksys Wireless-G Cable Gateway Model # WCG200-CC. Im getting four full green bars in my room, but it has the same SSID as my other network is that how its supposed to be? When I test my Xbox Live connection it says the IP address failed, so i am guessing there is something wrong? I have been reading about fixes and have read something about a static IP address. Do I need to set this and if so how? I have no idea what I am doing whatsoever since this is my first WRE, so any detailed help is much appreciated.
EDIT: I forgot to say it was a version 3 WRE.
Message Edited by HackjobJonny on 08-14-2008 03:25 PM

when you autoconfigure the wre54g, it will actually copy the settings of the ap nearest to it except if there is security settings configured on the ap.
not much familiar with xbox live cause im more of a psp addict
anyway, if xbox 360 has some sort of an ssid scanner, it should see the 2 same ssids but it should see the mac address of the ap and the expander as well. if you applied wireless security on your wcg200, you should set the same security settings on the wre54g. then try reconnecting to the expander again. if the wcg and wre synchronized then there's no need for you to assign a static ip on your 360.

Xbox 360 recognizes EX4 but don't show any files!!

I recently purchase an EX4 for my movie collection (which is 1.37 TBs so far). Copy all my files from my Seagate GoFlex Home 3TB to the EX4, successful. My PS3 recognizes, reads, and plays my movies, no problem. Today, I purchased an Xbox wireless adapter for my Xbox 360. The Xbox recognizes, reads, and play movies from the Seagate but only recognizes the EX4 and NO VIDEOS FOUND is the message I kept getting. Am I doing something wrong???

My network setup is: a Motorola NVG510 DSL modem (AT&T UVerse), Dell Inspiron Small Desktop 3647 (Intel Pentium G3220/3GHz), Seagate GoFlex Home 3TB and Western Digital EX4 8TB. Trying to convert fully over to the EX4, once I figure this problem out. The Seagate and Western Digital is network-attached thur modem, also. What would be my media server, if I have one?? Not familiar with media server.

WRT56G v5 Xbox 360's on Moderate but I want it to be open

Similar Messages

Maybe you are looking for