WRT600N and Network Places can't see other N device
I just replaced my WRT350N with a WRT600N. After install, my wired desktop cannot "see" in Network Places my other Desktops Shared Drive which has a Linksys WUS300N. This Desktop (with WUS300N) is able to access the internet wirelessly and all settings in router are default. In addition, my wired desktop can "see" all other G devices in "Network Places", but just can't "see" the WUS300N device in Network Places. Once I put the WRT350N back, all devices can be seen in Network Places. Shut down WRT600N, restarted all units, shut off/on sharing, turned firewalls off...no change
My wired desktop is Vista Premium 32 Bit
My wireless desktop is XP Home Edition
I replaced my WRT350N with the WRT600N too because of all the problems with the 350N and to have the dual band as most of my laptops have wireless N cards. I have not had any problems with this router other than only being able to access my USB Tera drive with my XP machines using ftp, if I try to search for it under network neighborhood as I do on my Visa machines and it only brings up default and it won't let my access my share that I created even with the user I created as an admin on the router to access the USB drive share, but since I can access it using ftp I am not concerned at all and otherwise this router is letting all my N wireless cards including the intel 4965N connect at 270Mbps all the time at the same time 3 other laptops that my kids use are connected too with wireless G cards, so I am a happy camper so far.
Similar Messages
-
I am logged on to a wifi and can see files from other users on this network. Can they see my files as well?
Yes and no. It depends on your settings.
Go into "System Preference" and click on "Sharing"
If you have services checked such as "File Sharing" then others can see your computer on the network. But you really don't need to worry because others would need your username and password to have access to your files.
What you see are just computers annousing themselfs on the network. To have access to said computers, Username and Passwords are required.
Hope this helps -
Can't see other Macs/PCs on the network...
Since installing the Safari 6/Apple Remote Desktop Update I can't see other Macs/PCs on the network. If I restart I can see 2 Macs, but after a while they disappear, and I can see/connect to nothing...
If you are using DHCP check that it is getting the correct addressing. In the event that it is but still not working then test by giving it a fixed IP and see if it then works.
-
I downloaded a movie on one of my computers, and yet I can't see it in my purchases and I can't download it on any other devices. Any suggestions?
Films will only show in your library if you've downloaded it on that computer or copied it from another computer. You checked the Purchased link under Quicklinks on the right-hand side of the store homepage to see if it shows there for redownloading on that computer
If it doesn't show there then you can copy it over from the computer that you downloaded it on e.g. via home sharing : http://support.apple.com/kb/HT4527 (that page refers specifally to music, but it works for other content types as well).
Or you can right-clidck (control-click on a Mac) on the film in the iTunes library that it is on and select 'show in explorer' ('show in finder') and copy it to, for example, a flashdrive, and use that to copy it onto the other computer's iTunes library (File > Add To Library) -
BBM on OS7 can't see others Personal Message
First time poster as I've been able to fiddle my through issues in the past, this on has me baffled.
I can post a Personal Message and others can see it, I can't see others in their profile. I was on a BES in the UK and due to issues this week had to activate on a other one in the USA. Had to move back and forth a few times (painful) and the lasy activation they went missing.
Deleted BBM
Battery pull
Re installed BBM
Same issue
Thoughts?
GarySorry, but what "network list" are you referring to? Are you referring to the iTunes Home Sharing feature? If so, perhaps this will help:
http://support.apple.com/kb/TS2972
Regards. -
I have shared folder in the office, sometimes I can't see others. why
I have macbook pro with leopard and 4 pcs shared in my office network. Funny I can see other computer and printer in my network folder and sometimes I can't see anything at all.
What is going on? Is there any setup that I need to change?
Please someone help me.
It's really annoying
Thank you so much in advance.Hold down the COMMAND key then drag the entry out of the Finder's sidebar until it poofs away.
-
I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.
Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?
-
I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC. I can however see my iPod touch under devices and sync it. How can I get my iPad to show under devices and sync as well? I have also tried may suggestions on the apple support site and none have worked. Any suggestions are welcome.
You need iTunes version 11+.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks
Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!
-
I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try. -
I upgraded to IE9 and now I can't see my iPod - any suggestions?
I upgraded to IE9 and now I can't see my iPod - any suggestions?
uninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I did the update today and now itunes can't see my ipod, uninstalled iTunes and all the recommended things, nothing has worked.
It worked just fine last weekend. I have windows 8.1 and a brand new pc, new iPod also, the new Nano. now after the update today, iTunes says iPod has been detected but could not be indentified properly. I can see it in windows. I tried the reset on the iPod also. what else can I do?? HELPuninstalled iTunes and all the recommended things
Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
A particular network user can't login to a mac in a classrom but other network users can. Then the network user can login to other identical macs in same classroom. Anyone seen this before? It has happen twice. Two different teachers in two different classrooms entering the correct user name and passwords and computer won't allow them to login. Then they try in different computers in same classroom and have no problem login.
Yes. I can login with a test user. And any other network user can login as well to this particular mac. Actually the mac has bootcamp and boots into either mac or windows. The same user entering the same login username and password can login into the windows side, but not the mac side.
I had this same issue last semester in another classroom, another mac and a different teacher. This summer I reformatted and imaged that mac and I asked that teacher to login today to that reimagened mac and she had no problem today doing so. -
Having trouble sending jpeg images as attachments in Mac email.....they go thru as images and PC users can't see the SAVE or QUICK LOOK boxes that Mac mail has. One friend scrolled over the image, right clicked on it and saved as a PNG file.
Apple Mail isn't going to change the format of any of your attachments. it isn't going to corrupt them either.
Exchange is a transport protocol and server. The issue you describe is not related to Exchange.
There are many different versions of Microsoft Outlook in use and they all have e-mail bugs. Different versions have different bugs. Some Apple Mail hack to get around a bug in Outlook 2003 may cause the same message to be problematic in Outlook 2000. Fix them both and another issue will cause trouble in Outlook 2007. You can't fix this. Apple can't fix this. Microsoft can and has but that is irrelevant if your recipients are using older versions.
One specific problem is that Apple Mail always sends image attachments inline, as images, not as iconized files. You can change this with Attachment Tamer. Just be aware that use of this software will break other things such as Stationery. E-mail is just a disaster. To date, no one outside of Apple has ever implemented the e-mail standards from 1993. Apple has continually changed its e-mail software to be more compatible with the de-facto standards that Netscape and Microsoft have unilaterally defined and people documented as "standards" after the fact. The e-mail messages that Apple Mail sends are 100% correct and do not violate any of the original standards from 1993 or the Microsoft/Netscape modifications. The problem is entirely bugs and limitations in various versions of Outlook. -
Can't see other people in group calls on iPhone4S
I can't see other people I'm group calls on my mobile device and they can't see me. Is this just my phone or is it skype.
Hi and welcome to the Skype Community,
Group video calling is currently only supported on Skype for desktop and Xbox One. See here: https://support.skype.com/en/faq/FA10613/what-do-i-need-to-make-a-group-video-call
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓
Maybe you are looking for
-
Computer freezes up and every operation says "not responding?"
My HP Pavilion windows Vista Home Premium keeps freezing up on me and the windows are frequently "not responding." It is becoming annoying every time I turn on the computer and it is also running slow. What could be the problem?
-
How to get subclass method in an inheritance?
Hi guys, I got the following classes: public abstract class Animal { private Long id; private String name; public Long getId() {return id;} public void setId(Long id) {this.id = id;} public String getName() {return name;}
-
Multi Select Prompt DEFAULT VALUE
Hi, i have following problem: I have two multiselect prompt Country with all Countries and Day with values from 1 to 31. When i load dashboard page, the first and second prompt are empty. First and second prompt have as default value "Report Default"
-
I had my phone (8100) hooked up and synched perfectly with XP Pro. I recently bought a new notebook with Vista x64. Although 4.2.2 supports Vista 64, the sync is not working. Clicking synchronize just causes the application to sit there. No progress
-
Replacing library Location using Jdapi ??? SUCCESS
Hi, we want to replace physical directory names by only the name of pll attached to forms and menus. (eg : C:\directory\mypll.pll replaced by mypll) to be able to use the forms_path. Using Jdapi the first problem is that whith FormModule.open() the l