Wrt600n connectivity loss requiring router reboot every day

the fun never stops with this router. i have to say that out of the 5 previous AP's / routers, this one has had more issues than the previous 5 combined.
at any rate, i am now seeing the ap lose all network connectivity every day, or every other day at best. i have to then reboot the thing, and the cycle repeats.
has anyone else seen this behavior, and if so any suggestions on how to fix it?

Have you tried to upgrade the firmware of your Router, If not then you can upgrade the firmware of your Router and i think this might solve the problem.Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Similar Messages

IMac reboots every day at 5:56 AM

Recently my work hours changed, so I'm now up at 5:30 AM instead of 6:30. Because of this, I was able to observe that my iMac G4 - sound asleep as I recently was at this hour - reboots every day at 5:56 AM precisely. Obviously some timed script is running, but I can't figure out what it is, where it "lives", and how to stop it. I have the Cocktail utility, so I ran the daily "cron" script - but the system did not reboot. The only things connected to the iMac are speakers, a Lacie 250 GB Firewire HD, and a M-Audio Keystation 49e USB keyboard (not powered on). I have no idea how long this has been going on since I've never been up this early until recently. Anyone have any ideas on what could be causing this?

Problem solved - and boy do I feel stoopid!
After checking out all the suggestions offered, I went to visist the iMac in question (located in the "family" room in the basement) at 5:54 AM this morning, coffee in hand. At precisely 5:56 AM (by my watch) the UPS shut down for a moment and then turned back on. The UPS battery is obviously fried, so the UPS shutdown/restart "reboots" the iMac (set to restart after power failure). Since the iMac is in the basement, I must have missed the warning beeps that signal battery failure. So what causes the UPS to restart at 5:56 AM? I had this experience years ago at a firm located in an industrial park - some nearby factory had machinery that started up the same time every day - heavy duty stuff - and it sent a huge "spike" down the line which wrecked havoc with out network backups. I suspect the same thing here - something "heavy duty" goes on-line at 5:56 AM and creates a power "spike" (or whatever) - the UPS senses the "spike" and shuts down to "spare" the devices connected to it, but since it can no longer provide power while it's off, it effectively "reboots" the iMac.
Solution - buy a new UPS!
Thanks to all who chimed in - sorry it wasn't something more exotic!
Robert

Airport suddenly needs to be rebooted every day

I have a client with an AirPort Extreme. He has been using it for several
years without a problem. Suddenly EVERY day (definitely when he wakes up in
the morning and sometimes at other points in the day - as far as I can tell
when the computer is idle) the status light blinks yellow.
When this happens he looses the wireless connection. If I plug an ethernet
cable into the AirPort it shows up under the AirPort Admin Utility, but is
unable to read the configuration to determine what the AP is unhappy about.
A simple power cycle fixes the problem.
I first thought it might be a problem with the AP so I replaced it with a
new one (having the latest firmware).
Same problem.
I have since replaced all ethernet cables and the Time Warner Road Runner
cable modem. Same problem.
I even tried a LinkSys router in front of the AP and put the AP in bridge
mode, but no joy.
A few other points:
If I sleep the MacBook I CAN NOT get the problem to happen (I am only
waiting max 10 min)
We "coincidentally" replaced his 3 year old MacBook with a new one (with OS
10.61) a few days before this problem started. I cant see how this could be
the problem as it happens when the computer is sleeping and the fix is to
reboot the AP not the computer, but the timing is awfully suspicious.
I dont know what else to try. Any ideas?
Thanks

If both devices are producing a wireless network, there is an increased chance of wireless interference between them, especiallyi if they are located in the same room. If you normally only one use one wireless network, it would make sense to turn the other one off.

WRT120N - wireless capability routinely fails and requires router reboot

I purchased the WRT120N wireless router about a month ago and have found that the wireless capability of this unit routinely fails. I have numerous wireless devices in our home but it's the Apple iTouches that use it most of the time. Every day or two the wireless function just stops working and I have to rebooot the unit via the admin web page. Then everything continues to work for a while until we notice that it has failed again. I upgraded the router firmware to v1.0.04 and followed the instructions carefully but this made no difference.
Searching the web revealed that this was a wide-spread and well documented problem. Many other forum posts warn consumers to avoid buying this cheap and unreliable product.
I am about to give up return the unit to the store I bought it from but thought I'd give one last chance to this forum to see if there was any fix or alternative.
Please advise. Thanks.
Solved!
Go to Solution.

hi, to this topic I'd like to post my problem. so i have wrt120n wireless router, and I had a problem with connecting two computers ( one PC on cable, other Notebook with wireless). When both computers is online, router start to reboot. Event wiever posted :
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0000E87303EE. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. especially when trying to send a file between computers through skype.
so that first problem, now I can't connect to internet at all. I've found almost the same problem:.
The computer is able to connect to the router perfectly fine, but I can't get on to the internet because I'm unable to aquire an IP address from the router. Instead of giving me my 198.168.1.x IP, I'm getting a 169.254.x.x.
But the thing is that i can't connect to router adress 192.168.1.1, I tried to reset router but still nothing. any ideas? how connect to the router?

E3000 parental controlled laptops require router reboot

I have an E3000 router connecting 4 laptops wirelessly. They are all the same model and OS machines, Dell Latitude E6510 with Windows 7 Pro.
I have 2 of the computers under parental control to disable the internet each night.
In the morning after the time to re-enable internet to the two controlled computers, they still won't connect
until I reboot the router.
I tried rebooting the machines instead.
I have to re-boot the router every day since we started last week to re-enable their internet access.
I called support who checked out my router settings through a remote connection and they said the settings are correct.
Call if it happens again.
Any help is appreciated,
Dan

I have found that if either of the restricted computers are left on through/during the time reset boundry, that we have this problem. Once I made sure the computers were shut down (not just in sleep or hibernate) then the restoration to access works.
Maybe this is normal?
Dan

Router hangs every day

Hi
I have cisco 2951 router having 2mbps(WAN) serial link & internal lan connected to gigabit interface L2-switch(Primary) having approx 150 users,
Every day i have to restart router atleast once a day, somtimes thrice a day.
I have just default route towards wan link.
when router hangs internal lan pings perfectly. but router gateway not . After restart everthing works smoothly.
what will cause this problem ?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Does your default route direct to next hop IP or to the interface? If the latter, ARP table can fill causing issues. So also if the latter, change to the former.

Firewall RV 220W reboots every day

English
Hello, like the tittle says every day at leats once this firewall restarts, and when all the services are up again the router doesn´t give any ip to the lapstops in the lan, so i need to reboot the firewall one more time ( and that takes about two minutes each time) and then it works.
I would like to know why this happing to this device.
Spanish:
Hola, como el titulo dice este firewall se reinicia por lo menos una vez al día, y cuando todos los servicios están arriba nuevamente, el router no da ip a ninguno de los laptops dentro de la red local, así que es necesario reiniciarlo una vez más ( y eso toma alrededor de 2 minutos cada vez)y después de eso funciona.
Me gustaría saber por que sucede eso en este dispositivo.
Saludos

I too had a similar situation with that router doing random reboots. I saved all configuration information, did a hard factory reset, then installed the latest firmware 1.0.5.8 and re-entered all the configuration settings BY HAND. Do not restore the configuration file from the prior setup. (Very important according to Cisco). Be sure to reboot after entering all the configuration settings.
It has operated rock solid after that with no errors logged or unwanted reboots.
Hope this helps.
Ron

Router reboots every time i use the txt app in iphone 3gs

I have a netgear cgd24g router and it reboots only every time i use the text free app in my iphone 3gs. First i felt weird and stated to google this problem. I found people having somwhat same kind of problem with other brands and had suggested few solutions, like resetting it, changing it to a ascii security code with a $, upadating the firmware of the router etc. I have done everything but i still have the same problem. I have 2 laptops and a desktop (no wireless in desktop) nothing is wrong when all three are working together. I even tried adding two more laptops and nothing is wrong. But as soon as i open the text free app and start texting the router reboots like in resetting it. The problem is only with the txt free app. Nothing happen when i browse thru safari or use youtube etc. But wen i use the txt free app the light goes off and comes back on one by one. I even went to the extent of asking my friend to download the app in his iphone and tried it using my wifi , the same thing happened. i even switched out the old netgear router with a new one and the same thing is happening. I am tried of this. CAN ANYONE HELP ME PLEASE ?????

yes i have tried everything from changin the security type to checking the firmware version. The firware version was the latest so i didnt have to update it. About changing the router, i did switch the old netgear cgd24g to a brand new netgear cgd24g. The brand was same because that is what my service provider would give me. I like the sugestion about trying it with a different router and see if the problem persists. If the problem is gone then i will get another one. This will help me figure out where the problem is.

RV320: VPN periodically freezes up and requires router reboot

This occurs for both site-to-site as well as client vpn. When it occurs, VPN's can not reconnect. Is there a known issue?

hi, to this topic I'd like to post my problem. so i have wrt120n wireless router, and I had a problem with connecting two computers ( one PC on cable, other Notebook with wireless). When both computers is online, router start to reboot. Event wiever posted :
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0000E87303EE. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. especially when trying to send a file between computers through skype.
so that first problem, now I can't connect to internet at all. I've found almost the same problem:.
The computer is able to connect to the router perfectly fine, but I can't get on to the internet because I'm unable to aquire an IP address from the router. Instead of giving me my 198.168.1.x IP, I'm getting a 169.254.x.x.
But the thing is that i can't connect to router adress 192.168.1.1, I tried to reset router but still nothing. any ideas? how connect to the router?

OS X server shut down , and reboot every days at 4 am

I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70

I shut down my server and every days at 4am , the server is rebooted
I don't activate the auto start function
See my system.log
Jun 20 18:42:07 jerome ntpd[136]: time reset -1.165220 s
Jun 20 18:45:27 jerome shutdown: halt by jmorgado:
Jun 20 18:45:29 jerome SystemStarter[3642]: authentication service (3677) did not complete successfully
Jun 20 18:45:30 jerome SystemStarter[3642]: IP Failover (3685) did not complete successfully
Jun 21 04:00:02 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 21 04:00:02 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 21 04:00:02 localhost kernel[0]: migtable_maxdispl = 70
Jun 21 04:00:02 localhost kernel[0]: 93 prelinked modules
Jun 21 18:38:24 jerome SystemStarter[5371]: IP Failover (5401) did not complete successfully
Jun 21 18:38:25 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[184]: exited abnormally: Terminated
Jun 22 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 22 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 22 19:25:47 jerome SystemStarter[5645]: IP Failover (5675) did not complete successfully
Jun 22 19:25:48 jerome launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/serialnumberd"[185]: exited abnormally: Terminated
Jun 23 04:00:01 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 23 04:00:01 localhost kernel[0]: vmpagebootstrap: 252054 free pages
Jun 23 04:00:01 localhost kernel[0]: migtable_maxdispl = 70

HH5A Rebooting every day.

Problems with HH5 have been going on too long now. Never had such a bad router (and this is second HH5 I have had). Old Billion router was up for months at a time. HH5 drops and reboots most days when in use, normally when working hard (online gaming via ethernet).
Time and date Message
20:54:01, 14 May.
( 38.000000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
20:53:41, 14 May.
( 18.140000) System start
22:04:04, 13 May.
( 37.780000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:03:44, 13 May.
( 17.910000) System start
22:58:20, 12 May.
( 38.070000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:58:00, 12 May.
( 17.800000) System start
21:46:14, 30 Apr.
( 35.830000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:45:54, 30 Apr.
( 16.270000) System start from GUI
16:13:20, 24 Apr.
( 37.100000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
16:13:00, 24 Apr.
( 17.260000) System start
08:09:41, 24 Apr.
( 36.500000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
08:09:22, 24 Apr.
( 17.340000) System start
02:57:38, 24 Apr.
( 36.460000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:57:19, 24 Apr.
( 17.470000) System start
21:44:20, 23 Apr.
( 36.040000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:44:00, 23 Apr.
( 16.300000) System start
21:35:13, 21 Apr.
( 36.310000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
21:34:53, 21 Apr.
( 16.240000) System start
12:08:35, 19 Apr.
( 34.930000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
12:08:16, 19 Apr.
( 16.220000) System start from GUI
16:30:47, 18 Apr.
( 37.240000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
16:30:28, 18 Apr.
( 18.110000) System start
02:04:28, 18 Apr.
( 36.650000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:04:10, 18 Apr.
( 18.490000) System start TR069
22:51:36, 17 Apr.
( 37.190000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
22:51:17, 17 Apr.
( 18.130000) System start
02:14:10, 17 Apr.
( 38.020000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:13:50, 17 Apr.
( 18.260000) System start
02:43:03, 14 Apr.
( 40.950000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
02:42:40, 14 Apr.
( 18.150000) System start
18:32:13, 05 Apr.
( 38.190000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
18:31:53, 05 Apr.
( 18.080000) System start
13:34:18, 28 Mar.
( 37.940000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
13:33:58, 28 Mar.
( 18.100000) System start
19:16:10, 27 Mar.
( 35.910000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
19:15:50, 27 Mar.
( 16.250000) System start from GUI
17:02:39, 22 Mar.
( 38.050000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
17:02:19, 22 Mar.
( 18.080000) System start
04:16:07, 20 Mar.
( 37.800000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
04:15:47, 20 Mar.
( 18.080000) System start
11:47:03, 12 Mar.
( 36.730000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
11:46:44, 12 Mar.
( 18.140000) System start
19:39:36, 06 Mar.
( 38.920000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
19:39:15, 06 Mar.
( 18.150000) System start
03:22:52, 03 Mar.
( 37.800000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
03:22:32, 03 Mar.
( 18.140000) System start
03:15:15, 01 Mar.
( 38.000000) System up, firmware version: 4.7.5.1.83.8.204 (Type A)
03:14:55, 01 Mar.
( 18.160000) System start

on Exchange FERNDOWN is served by Cabinet 11
Featured Products
Downstream Line Rate(Mbps)
Upstream Line Rate(Mbps)
Downstream Range(Mbps)
Availability Date
HighLowHighLow
FTTC Range A (Clean)
54.4
35.5
13.9
8.4
Available
FTTC Range B (Impacted)
46.8
25.7
13.9
6
Available
WBC ADSL 2+
Up to 8
5.5 to 12.5
Available
WBC ADSL 2+ Annex M
Up to 8
Up to 1
5.5 to 12.5
Available
ADSL Max
Up to 5.5
4.5 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
Available
Copper Multicast
Available

Photoshop requires sign in every day

This is my third day using PSCC 64 bit and literally every day at some point in launching PS it askes me to log in. Again and again, is this normal behaivor for CC, does it require daily log in? I have read that CC only goes online to check every month.
I also have to resign and agree to the license agreement, every time....

I'm having the same problem. It's extremely aggravating.

Internet connection switches of same time every day

Question relates to G4 iMac running 10.4.10.
Internet connection is USB modem, no LAN - works fine except that at 9.30pm every day it switches itself off.
I can't find any preferences or settings that would prompt this so am hoping someone can help...?
With thanks

Thanks ricckli
It's a straight-through connection via a USB modem.
The ISP is Pipex - I don't think they switch off but will look into it.

Connection dropping. Same time every day. Packet B...

Hi there, I am at the end of my tether trying to get assistance through the BT phone number. Here is the background.
I had a 2nd line added to my property in September 2013 to be a dedicated broadband line, no other phone ports were created other than the master socket. The BT Home Hub is connected to this master socket and I connect to it via WiFi upstairs. No telephone is used on the socket. The router is the small black one with the 3 blue lights that you see on the advert.
The connection has been fantastic up until 12th February when I reported Fault ref : VOL051-**********
At the moment that Fault ref has a graphic showing Broadband Problem at Location (1) BT Retail Servers.
I'm from an IT background and feel I understand a lot of what goes on, any questions, just ask me.
I am a Sports Trader and have dedicated software that has a Ping graphic, this means that at all times I can see that I have a stable connection (or not).
Overview : At 9:30pm every other day, my connection becomes unstable, the ping graphic flashes red showing that some pings to the server are taking in excess of 1000 milli seconds, when they are normally around 60ms.
Over the next 5 minutes, everything grinds to a halt.
I then moan for the next hour rebooting, restarting until things settle down to normal around 10:30pm.
During this hour, there are times where my router can't connect to broadband, there are other times where it claims its connected but the speed is akin to an old dialup.
I have disconnected anything wireless around the house over the last month, nothing is solving the problem.
I've looked in the Event Logs and I am convinced there is something far wrong internally. I will paste this below.
I also ran a tracert to google.co.uk during the problem time tonight, it took forever and I will also paste this below.
I had been out tonight so returned home and tried to start working at 22:07, my wife had been on the connection from a different laptop earlier.

22:55:12, 03 Mar.
(89315.170000) Admin login successful by 192.168.1.66 on HTTP
22:36:59, 03 Mar.
IN: BLOCK [16] Remote administration (ICMP type 8 code 0 217.32.142.102->86.130.199.115 on ppp0)
22:35:41, 03 Mar.
(88143.730000) CWMP: session completed successfully
22:35:41, 03 Mar.
(88143.290000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:35:38, 03 Mar.
(88140.730000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:35:38, 03 Mar.
(88140.720000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
22:35:36, 03 Mar.
(88138.380000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
22:32:41, 03 Mar.
(87963.890000) Admin login successful by 192.168.1.66 on HTTP
22:32:03, 03 Mar.
(87925.220000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:32:03, 03 Mar.
(87925.220000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 72.2 Mbps
22:32:03, 03 Mar.
(87925.210000) Lease requested
22:32:01, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:32:01, 03 Mar.
(87923.760000) Device disconnected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4
****** CONNECTION STARTS WORKING AND BTWHOLESALE SPEEDTEST PAGE LOADED ABOUT NOW *****
22:29:47, 03 Mar.
(87790.180000) CWMP: session completed successfully
22:29:45, 03 Mar.
(87787.920000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:29:11, 03 Mar.
(87753.240000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:29:11, 03 Mar.
(87753.230000) CWMP: Session start now. Event code(s): '6 CONNECTION REQUEST,4 VALUE CHANGE'
22:29:07, 03 Mar.
(87749.540000) CWMP: Initializing transaction for event code 6 CONNECTION REQUEST
22:27:16, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:26:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50063->193.113.8.194:80 on ppp0)
22:26:18, 03 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
22:26:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50063->193.113.8.194:80 on ppp0)
22:25:21, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:25:03, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:25:02, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:25:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:24:51, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:24:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:24:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:24:15, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:24:08, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.159->86.130.199.115 fragment_offset=0)
22:24:06, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:23:33, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:23:32, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:23:30, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:23:21, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:23:04, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:22:50, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:22:48, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:22:47, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:22:45, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:22:35, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50027->46.19.168.101:443 on ppp0)
22:22:19, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:22:05, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:22:03, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:22:02, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:22:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:21:40, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50017->46.19.168.101:443 on ppp0)
22:21:29, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50018->66.235.133.62:443 on ppp0)
22:21:19, 03 Mar.
BLOCKED 1 more packets (because of First packet is Invalid)
22:21:18, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:21:17, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:21:15, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:21:00, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49968->46.19.168.101:443 on ppp0)
22:20:59, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49969->46.19.168.101:443 on ppp0)
22:20:58, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:49964->46.19.168.101:443 on ppp0)
22:20:48, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:50011->46.19.168.101:443 on ppp0)
22:20:20, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.151->86.130.199.115 fragment_offset=0)
22:19:38, 03 Mar.
IN: BLOCK [5] Fragmented packet (TCP 173.194.34.153->86.130.199.115 fragment_offset=0)
22:19:37, 03 Mar.
IN: BLOCK [5] Fragmented packet (IP 173.194.34.153->86.130.199.115 fragment_offset=1448)
22:18:09, 03 Mar.
(87091.420000) Admin login successful by 192.168.1.66 on HTTP
22:14:39, 03 Mar.
(86881.700000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:14:39, 03 Mar.
(86881.690000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 130.0 Mbps
22:14:39, 03 Mar.
(86881.680000) Lease requested
22:14:39, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:14:39, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client disassociated
22:12:30, 03 Mar.
BLOCKED 3 more packets (because of First packet is Invalid)
22:12:28, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:26, 03 Mar.
BLOCKED 2 more packets (because of First packet is Invalid)
22:12:24, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:24, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:23, 03 Mar.
BLOCKED 2 more packets (because of First packet is Invalid)
22:12:22, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:22, 03 Mar.
BLOCKED 3 more packets (because of First packet is Invalid)
22:12:21, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57378->90.216.129.135:8443 on ppp0)
22:12:21, 03 Mar.
BLOCKED 11 more packets (because of First packet is Invalid)
22:12:20, 03 Mar.
OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.66:57381->90.216.129.135:8443 on ppp0)
22:12:19, 03 Mar.
(86742.030000) Lease for IP 192.168.1.66 renewed by host Ross (MAC c0:d9:62:04:0c:f4). Lease duration: 1440 min
22:12:19, 03 Mar.
(86742.030000) Device connected: Hostname: Ross IP: 192.168.1.66 MAC: c0:d9:62:04:0c:f4 Lease time: 1440 min. Link rate: 52.0 Mbps
22:12:19, 03 Mar.
(86742.020000) Lease requested
22:12:19, 03 Mar.
ath0: STA c0:d9:62:04:0c:f4 IEEE 802.11: Client associated
22:08:40, 03 Mar.
(86523.200000) Lease for IP 192.168.1.67 expired. MAC: 74:46:a0:6f:fd:98, host name: HP6FFD98
22:07:07, 03 Mar.
(86429.310000) CWMP: session completed successfully
22:07:06, 03 Mar.
(86428.990000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
22:07:02, 03 Mar.
(86424.730000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
22:07:02, 03 Mar.
(86424.720000) CWMP: Session start now. Event code(s): '2 PERIODIC,4 VALUE CHANGE'
22:07:00, 03 Mar.
(86422.900000) CWMP: Initializing transaction for event code 2 PERIODIC
**** I RETURN HOME NOW AND TRY TO START WORKING. NO PAGES WILL LOAD PROPERLY, DIALUP CONNECTION IT FELT LIKE
21:52:42, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 218.77.79.34:51447->86.130.199.115:22 on ppp0)
21:25:12, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 182.52.130.95:33686->86.130.199.115:80 on ppp0)
21:08:40, 03 Mar.
(82921.200000) NTP synchronization success!
20:52:19, 03 Mar.
IN: BLOCK [16] Remote administration (TCP 198.20.70.114:4183->86.130.199.115:80 on ppp0)
20:43:52, 03 Mar.
(81432.600000) Device disconnected: Hostname: Nelson2011-PC IP: 192.168.1.64 MAC: 00:22:5f:35:f4:80
tracert google.co.uk
Tracing route to google.co.uk [173.194.34.151]
over a maximum of 30 hops:
1     4 ms     2 ms     2 ms BThomehub.home [192.168.1.254]
2    20 ms    20 ms    21 ms 217.32.142.102
3    29 ms    94 ms    21 ms 217.32.142.126
4    27 ms    27 ms    27 ms 212.140.206.2
5    27 ms    27 ms    27 ms 31.55.165.169
6    28 ms    29 ms    27 ms 31.55.165.107
7    27 ms    26 ms    27 ms acc1-10GigE-7-3-0.mr.21cn-ipp.bt.net [109.159.25
0.98]
8     *        *        *     Request timed out.
9    34 ms    33 ms    33 ms peer1-xe2-0-0.telehouse.ukcore.bt.net [109.159.2
54.100]
10    34 ms    33 ms    33 ms 195.99.126.105
11    36 ms    34 ms    34 ms 209.85.252.188
12    45 ms    36 ms    35 ms 209.85.253.115
13    36 ms    35 ms    36 ms lhr14s21-in-f23.1e100.net [173.194.34.151]
Trace complete.

WRT54GL disconnects frequently, have to reboot every day. Help?!

Hi All,
I'm quite tech savvy having been in IT for over 10 years, but my WRT54GL has always given me some trouble, but since updating to the latest firmware I now have to reboot it daily. I have downloads going overnight and by the time the morning comes, none of the computers can connect wirelessly and even the wired connection can't ping the router, so I unplug it and plug it back in and it works for a while, but by the next morning it all happens again. I set the MTU per the solution/instructions here: http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4031&lid=
(1300, ISP pinged at 1272 and but nit higher) but it doesn't seem to have helped. Any tips?
Thanks!
B

Check the firmware version from the status page of the router ...if required upgrade download the latest firmware from http://linksys.com/download ... After upgrade reset & reconfigure the router ..

Wrt600n connectivity loss requiring router reboot every day

Similar Messages

Maybe you are looking for