WRT600N Doesn't show any entries in the Wireless Client List

Hi, my WRT600N is on firmware 1.01.35 build 3. When I check the wireless client list from the Wireless MAC Filter page, it is empty, even though I know I have 3 clients connected. They are all using 802.11g, as I don't have any N devices yet. When I go to the Status page and check the DHCP Client Table, both of my wired clients are there, but only 1 wireless client appears. The DHCP Client Log file is useless, as it only appears to log the ip address it receives from my isp. There are no entries of the ip addresses it has given out. Is my WRT600N defective, or is there firmware in the works to correct this?

Another thing I've notice, is that the DHCP client table is showing the 2.4 wireless devices as LAN interfaces. Shouldn't it show the frequency, like it does my one 5GHz device? Things have changed, because the Wii is now showing in both the Wireless Client List, as well as the DHCP Client table. It shows as a LAN interface though, which is wrong, it should be 2.4GHz. My one pc that is a 5GHz N device, is also showing in both the Wireless Client List, & the DHCP Client table. Neither the wireless 2.4 gaming adapter, or the HR20 connected to it show up in either list. Neither does a laptop which is 2.4GHz. This is really a concern, because I've caught 2 neighbors stealing my bandwidth in the past, and I can't stop them if I can't see them.

Similar Messages

After updating to 6.0 iPhone doesn't show in iTunes for the wireless sync

I have the iPhone 4s, after updating to 6.0 it doesn't show in iTunes for the wireless sync. My iPad which is first gen. still shows up. If I plugin with usb it shows up but as soon as I unplug it disappears.
When I click on the sync wireless on the iPhone , it trys to sync but nothing.

it's okay, it is not silly. but yes it was on but i went ahead and turned it, (the phone) off rebooted and turned it back on and rebooted phone again to see if it helps it any.... but to no it did not change, it still doesn't show up. as well as when i look in on wifi and see choose network mine is not populated until after a couple seconds. so it has something to do with not being able to hold on to a wifi signal when going to sleep or putting phone to sleep via power button. i do not see the wifi signal meter until a couple seconds after i wake it up from sleep. and now neither my ipad or iphone show up in itunes. so there is issues i guess with something. i have tried everything an dam too frustrated to do anything more.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

When I try to access my emails the screen opens but doesn't show any emails

When I try to access my emails the screen opens but doesn't show any emails

Tap to open a new tab and Private will be at the bottom left of the page. If it is active, tap to turn it off.

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't connects to the LAN server that i created in the Game.
Could any one help me please.

Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
How to log a kernel panic

I just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone

i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes

No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and…

My ipad shows I'm getting mail but when I check my in box it doesn't show any new mail I've received in the last 2 weeks

my ipad shows that I'm getting mail but when i check my in box it doesn't show any ne mail that I have received in the last 2 weeks?

Delete your email account and set it up again.

My adobe ID doesn't show any plan. But I paid for the programs, please help!

I signed up awhile back and have been using aftereffects and premiere for a couple weeks. Now I need to download encore as well but adobe doesn't show any plans or products on my account. Can anyone tell me how to fix this? Thank you!

Moving this discussion to the Adobe Creative Cloud Forum.
Tikcuf13 if you need to verify your membership then please contact our support team directly at Get help with orders, refunds, and exchanges.

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Since updating to OS7 the video app doesn't show any titles for movies I have downloaded on my iPad. Anyone have the same problem or a fix?

Many users have solved the problem by syncing several times; and if that doesn't work, perform a simple restore. Your titles will come back.

When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

BPEL Console doesn't show any instances created

Hi,
We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
The BPEL process is simple flow with one receive , transform and invoke activity.
I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
Please help.

Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
Kalyan

"Dependecies" tab doesn't show any information for a selected table version 4.0

Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
Milan

Hi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
    <title><![CDATA[*Referencing Tables]]></title>
      <query>
        <sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
      </sql>
    </query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

IPhoto app doesn't show any photos from my photos app

I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty. When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could. Is this a known iOs6 bug?

Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Running Sync BPEL process doesn't show any HTML form /XML source for input

Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

WRT600N Doesn't show any entries in the Wireless Client List

Similar Messages

Maybe you are looking for