WRT600n is VERY slow on the 5GHz channel....

I have a WRT600n and a WGA600n, The router and the gaming adapter seems ok at the 2.4GHz speed, but it is VERY slow at the 5GHz speed (the reason I bought this so I can do wide 40MHz for my n)
I do not know if this is the router or the gaming adapters problem! Can anyone direct me? This is really driving me nutd as I want to get my HDTV streaming....
Best,
TVO

I'm also experiencing this problem, although only on local LAN activity. In my test scenarios, I'm transferring a 700MB AVI file from a laptop located less than 8 feet from the router (connected with a WPC600N PCMCIA card) to a desktop (connected via Ethernet).
The 2.4GHz 802.11g connection holds steady around ~2.5MB/sec and has yet to fail the file transfer.
The 5GHz 802.11n connection can't break speeds of ~250KB/sec, and file transfers of anything over a few kilobytes always fail.
As I said, the weird thing about this is that in both cases Internet transfers are completely unaffected -- they fly by at top speeds. I bought this router and two matching network cards to move hi-definition video across my network, and it looks as though I've been lied to yet again by networking manufacturers. I hope that the comparison of my experience to yours can help shed a little light on the problem, but given the current slate of products on the market let's just say I'm not holding my breath.

Similar Messages

Updated to firefox 4.0. since then my computer is very slow accessing the internet, websites and getting information from within a website.

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

Over a week ago I updated my computer to Firefox 4.0. Since then my computer is very slow accessing the internet, websites and getting information from within a website. Also, a tool bar has shown up for YAHOO which I did not request. The old detailed tool bar for Firefox has disappeared. All that now shows for Firefox is the area to enter website urls and an area to enter topic for a Google Search.
Many times I have to exit Firefox and re-enter it later to access the internet.
Please advice what I need to do to get back to the speed I had with the older version of Firefox.
Thank You,
Dennis

My MacBook Pro is running very slow with the wheel constantly spinning. Can anyone please help?!?!

My MacBook is running very slow and the wheel is constantly spinning. It's not just using the internet as it takes forever to start, open programs, etc. It is even taking me a long time to type in this question as the spinning wheel keeps coming up. Below is the EtreCheck.   I would appreciate it if someone could please help me!
EtreCheck version: 1.9.15 (52)
Report generated September 7, 2014 at 11:30:33 PM EDT
Hardware Information: ?
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 5:3:7
Disk Information: ?
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (425.17 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.sony.driver.dsccamFirmwareUpdaterType00 (1 - SDK 10.6) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents: ?
[loaded] com.google.keystone.agent.plist Support
[running] com.sony.SonyAutoLauncher.agent.plist Support
User Launch Agents: ?
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items: ?
iTunesHelper
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
o1dbrowserplugin: Version: 5.4.2.18903 Support
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.4.2.18903 Support
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
      3% WindowServer
      0% mdworker
      0% Microsoft Excel
      0% aosnotifyd
Top Processes by Memory: ?
115 MB Microsoft Excel
115 MB Safari
70 MB Mail
68 MB com.apple.WebKit.WebContent
66 MB com.apple.IconServicesAgent
Virtual Memory Information: ?
1.71 GB Free RAM
1.46 GB Active RAM
161 MB Inactive RAM
685 MB Wired RAM
353 MB Page-ins
0 B Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?.

I have an iMac4.1 and my iPhoto is very slow and the thumbnails correspond to the wrong pictures. How do I fix this? Or is my iMac too old? Will getting a new iMac solve this problem?
I realize is only 512MB of memory but I want to make sure that a new iMac will solve this problem. Can the new iPhoto handle 10GB or more of photos? Or do I have to go to Picasa anyways in which case I can buy any computer to do that?

The model of Mac is not partcularly relevant, it's the version of the OS and iPhoto that matter.
iPhoto - since 2006 - is good for 250,000 images.
Regards
TD

I downloaded the latest version of adobe flash player 2 versions loaded and now it's very slow and the wheel keeps spinning

My computer is running very slow, and the colored wheel keeps spinning causing pages to load slowly. I recently downloaded adobe flash player. It seems 2 versions loaded. Could this be causing the problem? How can I uninstall these programs? Thank you

Adobe Flash Player
Check Flash Version
Adobe strongly recommends that you first uninstall any previous version of Flash Player, using the uninstaller:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html#main_1 0_4
Follow the instructions closely, such as quitting ALL applications first before installing. Repair permissions and restart your computer after the installation is completed.
Authored by Klaus1

HT1338 My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up??

My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.

As well as what a brody asked :
- do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
- do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
- do you need to do maintenance, e.g. clearing out caches and unused logs, etc?

My ipad 3 is very slow and the programs are closing it down

Hello,I was wondering know if someone can help me with this, my ipad it is working very slow, also the keyboard have a long delay and the programs are going off of freezes. It is an Ipad 3, that i believe it is not old, i already restored several times and is setted as a new ipad now, but it is still doind the same. Every time that I call Apple they ask me to restore it again, to be honest i don't want to buy a new ipad, is there anyone who can help me?

You can try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
May not help, but will not hurt anything.

Hello. My iPhone 4s is very slow since the iOS 8 update. Is anyone else experiencing this or please can anyone help?

As per the title, my iPhone is very slow since the update, plus my husband's phone is experiencing the same issues. There is plenty of available space. Hope you can help.

iOS 6 works just fine on my 4S and everyone else's that I know.
What have you done to troubleshoot your issue?
Have you taken the basic troubleshooting steps clearly outlined in the iPhone User guide?

HT1688 My iphone 4 is very slow since the IOS upgrade. What can I do to bring it back to the speed it was prior to this upgrade ?

My iphone 4 is very slow sine the IOS upgrade. What can I do to bring it back to the way it was before the upgrade. It's turtle speed now!

I forgot to mention earlier: if you find that on-screen typing is very slow to register then you might try logging out of iCloud and iTunes and the App Store in Settings/iCloud/[Delete Account] and Settings/iTunes and App Store/Apple ID [Sign Out]. Then reset the phone (press sleep/wake and home buttons together and hold until Apple logo appears), and then log back into iCloud and iTunes and the App Store in Settings again.

Very slow at the startup why?

its very slow on the startup also after the clearing of cookies and caches and all unecessary bookmarks and history

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need to close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

My computer has been getting the pin wheel and moving very slow since the i downloaded yosemite

Whenever i have a video playing from my internet browser it causes my computer to pin wheel and go into thinking mode with all of my apps that are open. It moves very slow and i have to force quit everything and reboot my computer to make it act normal. this all started after the software update. Any suggestions>

Mine has been moving extremely slow, too. I had a problem downloading and installing Yosemite and after many conversations with Apple Care, the solution was to remove the 3rd party RAM I had just installed prior to the upgrade. That solved the download/install problem, but now it's slow as anything. I opened my activity monitor and sure enough, the memory pressure is at full load so I have to install more memory. The trick is to make sure it's truly compatible.
Have you checked your activity monitor's memory report?

Oracle Forms Performance very slow on the internet

Hi ,
We have developed a form application with forms Developer 10g and deployed it on a ORACLE 10g AS. If the user runs our application over intranet there is no any network problem or not any performance decrease occurs. However if we deploy our application over WAN or internet, the startup time of the forms become Very Slow.
What we can use to make it faster , is there any other tools we have to learn like APEX or JDeveloper , what is the best solution , should we forget the Developer for ever and starting with other tools with fast performance on the internet , if so , what we have to learn , please help us , its common problem .
any help please ,

Interesting thread....
You asked whether "Forms" is the right product for the job. Well, the answer to that question will depend entirely on exactly what functionality you need and your skill-set. One advantage of using Forms over other Oracle products is that, in my opinion, Forms allows you to create simple or complex applications very quickly, with limited development experience. The downside to using Forms however, is that it does use a fairly thick client making startup slower than other applications. Generally, Forms is not very well suited for Internet deployments although it can and has been done. If your goal is to use a product which is easy to work with and is appropriate for Internet deployment, you may want to consider Apex. The downside to Apex is that unlike Forms, Apex generates what I like to call static html pages. Meaning once a page is displayed for the end-user, the data on it remains the same until the user forces interaction with the server again, but in this case the entire page would be refreshed in order to realize the changes. In the case of Forms, any content displayed to the end-user can be change without completely refreshing their view. I like to refer to Forms as a living application because unlike Apex, it can easily respond to most user inputs and/or server side changes almost in real-time. If you want this "live" experience, Forms might be the way to go, although at the cost of some startup performance. Alternatively, Oracle ADF can also give you a similar live-like experience. However, ADF will require a broader skill-set (pl/sql, java, html, etc), whereas with Forms you could get away with only knowing pl/sql although java knowledge would be helpful.
The views expressed in this thread are my own and do not necessarily reflect the views of Oracle.

Recovery very very slow on the physical standby recently

The standby was running fine for over a year. But recently the recovery became very slow. It took over an hour to apply one archivelog causing the standby falling behind. What could be the cause and solution?
Thanks!

Before I go further with my comment, I would recommend to open a SR with Oracle and have them help you to resolve the problem.
You said that the archive logs are being applied, however the apply rate is slow? Is this true?
Since you are applying the archive logs, it looks like your protection mode is set to ASYNC Maximum Performance.
Can you check if all the logs are being shipped to the standby without any problem?
There are couple of DG healthcheck scripts available on Metalink.
Metalink Note 241438.1 Script to Collect Data Guard Physical Standby Diagnostic Information
Metalink Note 241374.1 Script to Collect Data Guard Primary Site Diagnostic Information
Can you run those scripts? If you feel comfortable, publish the output of the scripts on this tread, otherwise review them. They may give you some clue on what might be going on.
Also check v$dataguard_status view.
select *
from v$dataguard_status
where severity in ('Error','Fatal')
order by timestamp; If you are not able to run the scripts due to database hanging state, as you described in your last post, try to determine why the database is hanging.
In this kind of situations I usually use HANGANALYZE that will generate trace files for all the running processes. It may take a while until you review these files. Especially pay attention to the RFS process.
SQL>oradebug setmypid
SQL>oradebug unlimit;
SQL>oradebug hanganalyze 266For more information on how to use HANGANALYZE refer to Metalink Notes: 175006.1, 452358.1 and 61552.1
However, if you haven't used oradebug before or don't feel comfortable using it, you better don't do that and wait on instructions from Oracle.
Also, as always, check the alert log file and the data guard log file (drc<sid>.log).
Cheers,
Edited by: tekicora on Dec 31, 2008 10:22 AM

Why the response is very slow when the DNS enrty of server PC is remov

Hi
Though this subject has been already discussed at many places,im unable to get the clue.Here is my problem.In my office (LAN),server and client are running at different PC.After DNS entry of server PC is removed from DNS server,the page loading and every request & response between client and server is very slow.It takes 2 minutes for each and every request.And coming to the possible solutions,is "configuring the server PC in DNS server" is the only solution?When both the server and client PCs are DNS configured i dont see any issue or slowdown.Any help would be really appreciated
Assuming it is a lookup issue,i have written the following test application.
public class DnsName
public static void main(String[] arg)
String ipaddress = "";
String hostaddress = "";
if(arg.length == 1)
ipaddress = arg[0];
else
System.out.println("!!!!!!Usage : java DnsName <ipaddress>");
System.exit(0);
System.out.println("Time before processing : " + System.currentTimeMillis());
try
hostaddress = (InetAddress.getByName(ipaddress)).getHostName();
catch(UnknownHostException uhe)
System.out.println("Exception occured " + uhe);
System.out.println("Ip address : " + ipaddress);
System.out.println("Host name : " + hostaddress);
System.out.println("Time after processing : " + System.currentTimeMillis());
When it was compiled and run on a linux PC,time difference betwwen process is around 50ms,but when the same application is run in a Windows PC,the time difference is around 4-5 seconds(4000ms).Can anyone tell me what makes the difference in Windows??
[email protected]
www.adventnet.com

Because it does a DNS lookup. And without a server, the interface must wait for a timeout.

WRT600n is VERY slow on the 5GHz channel....

Similar Messages

Maybe you are looking for