WRT600N(V1.0) and LG BD390 Blu-Ray player...

For some reason the LG BD390 is not seeing both access points to the WRT600N. It is only seeing whatever the FIRST one is set to. So if I set the top one to G, it will see it as G and if I set it to N, it will see it as N and will connect fine. However, setting the first as G and the second to N(which is the only possibility), the LG BD390 fails to see the N Access Point. Even turning OFF the first(G) access Point and only running the 2nd, the BD390 still won't see it. It only sees the first.
Obviously this seems to be an issue with the LG BD390, as nothing else I have, has this issue(I have submitted it to LG), but my question is, is there any way to run N as the first Access Point and G as the sesond? I don't have the option to set the second access point to G, only N or A.
Beyond that, is there any potential router setting(s) that I could try, that may allow the LG to see the 2nd access point?
Thanx

Adjust the Wireless Settings...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
2.4GHz Wireless Settings :
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
5GHz Wireless Settings :
Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network.
Set the Radio Band to Wide-40MHz and change the Wide channel to 46 and Standard Channel to 48-5.240GHz...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

  • Recently bought an LG 3D tv and an LG 3d Blue Ray player but am having problems with my setup

    I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all. My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of. My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all. The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all. I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound. When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
    The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?
    Solved!
    Go to Solution.

    tomc1965 wrote:
    I bought a 47LA6200 TV and a BP530 blue ray player. I have my cable box hooked up to HDMI 1, I have my blue ray hooked up to HDMI 2, and my XBox 360 to HDMI 3. I have my cable box hooked up to my older JVC RX880V stereo digital optical to digital optical without any 5.1 problems at all.
    My TV digital optical out is hooked up to my stereo digital optical port 2 without any 5.1 problems either, sort of.
    My BP530 is hooked up to my stereo digital coax to digital coax but I cannot get any 5.1 sound at all. Not through any of the digital channels on the stereo at all.
    The player only comes through as standard stereo through all 4 speakers and I am not sure if it is coming through the base speaker at all.
    I have tried every setting on both the TV and the blue ray player to no avail. I have even tried to not use the digital on my blue ray but when the stereo is set to play from my tv optical I still don't get 5.1 sound.
    When I do not use the TV optical out but I do use the digital coax out from the DVD player I still cannot play my DVDs in 5.1. I have new HDMI 15gbps HDMI cables and a new digital coaxial cable so I don't think it is a cable thing.
    The real question is how do I get to hear my blue ray and DVD discs in 5.1 sound? Will this work if I exchange my blue ray player for a Denon 3D blue ray or other player?

  • Will I need to buy a digital tuner if I buy a blu ray player?

    I was looking at the blu ray DVD players and noticed that some came with a digital tuner and some without. Will I have to buy it separate if it does not come with one or will my HDTV provide that?

    I was comparing an LG blue ray player BD390 and a Sony Blue ray player BDP S560, out to the side listed under features was Digital tuner; The LG said yes and the Sony said no. Both were listed around 250$ I was wanting to know if I need this? Do I have this covered by having an HDTV? Why does a blue ray player need this? The reason I asked is to understand the digital tuner issue a little better. Thanks for your replies. 

  • Can I connect my iMac's iTunes library via wi-fi to my Blu-Ray player so I can listen to the music on my computer with my home theater system?

    My music library is on my iMac, located in a different room of the house than my home theater system with a decent Denon receiver and good Infinity towers. I have an iPod connector to the Denon which I can use, but the iPod has a limited library of songs, so I would like to somehow access my iMac music library and be able to play it through the home theater system. Hard wiring the components is out of the question due to length of run through several rooms of the house, no basement and cathedral ceilings. I already have my iMac and my Panasonic Blu-Ray player both connected to my wi-fi, and it seems there should be a way to connect both of them using the wi-fi. The blu-ray player is DLNA, but the Mac isn't, so that is out of the question. Is there any other way to get these components to talk to each other over wi-fi?

    There is a DLNA media server called MediaLink that is designed for use with the Play Station 3.  It is not advertised as working with other DLNA clients but it usually will.  I use it to stream audio, video and pictures to a WDTV media player in my bedroom.  Works great, even supports iTunes playlists.  I believe it still has a free trial period so you can see if it works with your player.

  • Blu-Ray player installation issue: missing VBScript

    Hi folks!
    After downloading bluray driver as recommended by Toshiba notifier, i have trouble installing it.
    After I have run installation, I receive 2 windows with following notifications:
    1, First: Cant find script engine VBScript for script ..... TC3052100B.temp\preinstBDV.vbs
    (where TC3052100B.temp referds to the bluray driver itself if i undersand correctly)
    2. and after the above window is closed, the following appears:
    Cant find script engine VBScript for script ..... TC3052100B.temp\BDPlayerSetup_Patch.vbs
    I already deleted the old driver and don't have any restore point....
    All rest of the operations run smoothly...
    But how to handle this situation????
    And i want my disk drive to function...
    Thanks so much in advance,
    Kaspars

    > After downloading bluray driver as recommended by Toshiba notifier, i have trouble installing it.
    Toshiba notifier? You mean Toshiba Tempro software
    I have no idea what notebook model you have and if your notebook was equipped with an Toshiba Bluray drive but I guess you get this error appears because your notebook isnt blu-ray capable and the Toshiba Blu-ray player isnt preinstalled.
    The point why you got this notification is simple: there are different notebooks with different hardware configurations. But the Toshiba tempro does not recognize if your notebook needs this software. Tempro shows you the drivers/tools/utilities which were released for the whole notebook series and were uploaded to the Toshiba driver page.

  • Trying to connect Sony Blu Ray player to MI424WR router wired through in-wall connection, help!

    Maybe someone can help me. My house has some pre-wired cat5e plugs in the walls. I have my MI424WR router upstairs and my Sony blu ray player downstairs. I first connected the router and blu ray player to the wall with cat5e cables, no luck. I then tried using a cat5e crossover cable from the router to the wall, no luck. The Sony blu ray player has everything set to auto, but do I need to configure something? Can someone help me figure out what is not working? Thank you.

    AEConfidential wrote:
    Shouldn't the wiring in the wall act like a hub with the router plugged into one wall jack?
    No.  cat5 wiring doesn't work that way.  Unlike phone wiring where all the wires are connected together, cat5 wiring connects point-to-point between two Ethernet devices.  You need a continuous cat5 path from the blu-ray player to the router.  The patch panel merely provides a termination point for each cable. 
    The easiest thing to do to get this working is to take a cat5 patch cord and use it as a jumper from the jack going to the blu-ray player and the jack going to the Actiontec router.  That will give you a continuous connection between the two devices.
    Longer term, if you want to add devices in other rooms that have a cat5 cable, you will need to add a switch as viafax999 suggested.
    http://en.wikipedia.org/wiki/Ethernet_switch
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=30&Tpk=ethernet%20switch&Order=PRICE
    You will need to connect the jack going to the Actiontec router as well as the jack going to each room where you want an Ethernet connection to the switch.  The number of rooms you want active will determine how many ports you need on the switch.

  • New Blu-ray player and DVD-R media... strange problem?

    Hello,
    So, I have a sample disc that we made last year with various clips on it. To the best of my knowledge, everything has worked just fine. Now, I have a new Sony Blu-ray player. I put our sampler in, and one of the tracks does NOT play the audio. Plays the video, no audio. Inserting the same disc into our other players and the audio plays with the video just fine. Grab another sampler from a different build/burn. Same EXACT issue, on the same exact video track there is no audio but the disc works in all other players. Now here is the real kicker- take either sampler disc and play it in the Blu-ray player, go to the track that plays the video but no audio, play it for a few seconds, then rewind and play from the beginning, and you get sound. Jump back to the chapter index and choose the clip, no sound. Rewind & play you get sound.
    Anyone want to give my any ideas as to what is going on?
    Mike
    For what it's worth, the project was edited in FCP, Compressed using Compressor. I don't specifically know the exact settings, but I typically use VBR with an average of 6 or a CBR of 5. I always use AC3 audio. DVDSP authored the disc. I usually keep my systems up to date, but the disc was authored last January so I would have been using whatever the latest system updated in January were. And finally there are two builds of the disc. The 2nd build has DVD Rom content added to it. But either build has the same exact issue with the same exact tack.
    Message was edited by: Mike Bisom1

    Not Really. Try using another batch of discs. Author the project over again..maybe it will help.

  • Best way to hook up blu-ray player to my HDTV and receiver

    Sony BRAVIA 60" Class / 1080p / 120Hz / LED-LCD HDTV
    Model: KDL60EX700 | SKU: 9763394
    This HDTV features 1080p technology for brilliant high-definition images and a 3D comb filter for enhanced color purity. Easily connect to Netflix, YouTube and Slacker via the BRAVIA Internet Video feature. Internet ConnectableGet access to great Instant Content on this LCD HDTV. Connect to the Internet and you will have instant access to stream movies, listen to music and a wide variety of content through your HDTV. Learn more about Internet Connectable products. Netflix YouTube Pandora
     4.7 Read reviews (63)
    Sale: $2698.99
    I just got the Sony BRAVIA 60" Class / 1080p / 120Hz / LED-LCD HDTV and I have a Yamaha RX-V1800.  I want to buy and hook up a Blu-ray player to both.  What the best way to do this?  Should I use the optical audio to connect the Blu-ray to the receive and the HDMI to connect to the TV?  I really want to be able to use HDMI for the audio but then I'm left with only component video for the TV.  I can't filter the sound through the TV, this does not work.  Does optical produce good audio? 
    Solved!
    Go to Solution.

    TheLexMachine wrote:
    nblank15 wrote:
    Okay so I did try to run everything through the Yamaha receiver and the refresh rate is just to slow.  I put in the DVD Salt and as soon as there was a chase scene I got lot of blurring.  Since I'm not going to get a new receiver any time soon is a HDMI to the TV and an optical to the receiver the best option?
    You have no idea what you are doing which is why your results are not pleasing. Simply connect the equipment with HDMI cables as instructed and use only Blu-Ray discs as they are full-resolution sources. Your Blu-Ray player applies upscaling and processing to your DVD which is why it looks like crap and your receiver would do the same depending on the settings. You also need to check the settings on your player and HDTV to get them both aligned for the best picture quality. 
    Well I did use HDMI cables, and I also checked all of the setting on both the receiver and the TV.  I did not use a Blu-Ray or player as I have not bought one yet.  So are you saying the only way to not get a blur when using this set up would be to only watch Blu-Rays??  That does not make much sense.  Also I would like to say I have some idea what I'm doing but obviously not as much as many people on this site, that's why I posted my question here.  Thanks though for pointing out the obvious, It was very helpful of you.

  • How do I change file format so I keep HD and can play on blu ray player?

    how do I change file format so I keep HD and can play on blu ray player?

    Hi
    Part of it - in my way of doing is
    Roxio Toast™ Pro incl BD-component.
    • Burn short AVCHD - on standard DVDs (20-30 minutes at HD quality) - NEED Blu-Ray player to be viewed
    or BD-burner and disks - for full Blu-Ray Disks (not got to this yet)
    I think that saving as .mpeg4 H.264 and save on USB-memory to be put into PlayStation3 also keep high quality playback.
    Yours Bengt W

  • How would I edit and burn HD 3D home movies at 1080i/60i to a Blu ray player on an iMac?

    I own a Sony HDR-TD30V HD 3D Camcorder and would like to edit and burn my 3D home videos (1080i/60i) to a Blu ray capable of playing on a home blu ray player or PS3 using iMac software.

    Well, you won't be doing 3D with Final Cut Express!  (With FCE you could edit 2D filmed with your camcorder @ 1080i60 but not 3D.)
    For that matter, Final Cut Pro X doesn't even handle 3D out of the box.  But there is a third-party plugin called Stereo 3D Toolbox that works with Final Cut Pro X. 
    As for BluRay, you will need an external BluRay burner and software that supports it ... like Roxio Toast Titanium.
    Also, I noticed that your profile says you are using OS X 10.6.8 - I strongly suggest upgrading to 10.7 (Lion) or 10.8 (Mt. Lion) before investing in FCP-X and other video software.

  • Samsung Blu-Ray player, Airport Extreme network, and streaming Netflix

    I am very frustrated. Can you help? My husband just purchased a Samsung Blu-Ray BD-P3600 player and TV. I have read all of the forums on trying to connect this to an Airport Extreme network. After several days of trying different options, I still can not get the Blu-Ray player to connect to my network and be able to stream Netflix. The only way that I have gotten close is through the wireless connection devise and putting in the IP address etc. When doing a network test, if checks the MAC Address and the IP Address, Subnet Mask, Gateway, DNS Server. It then pauses for a long time and tells me that the Gateway Ping won't work. It says, "Your network cannot operate properly." I have not had any trouble connecting any computers or printers to the network. Why can I not get this to work? Please tell me what I am doing wrong. I know just enough to be dangerous. Thank you!

    Hi - I found this on CNET but not a techie so not sure if this will work - I have Airport Extreme & just bought 2 Samsung Blu-Ray BD-P3600 players to use w/NetFlix and have called Samsung tech support 3 times w/no luck - the last time the technician said that Apple/Samsung WIFI not compatible - I have a 13 character pswd so that my roommate who has a PC can connect - we don't have any problems with any other connections to Airport Extreme -
    Post today from CNET discussion on same topic:
    by tommyw66 - 1/6/10 4:54 PM In reply to: Samsung blu ray and Apple Airport Extreme/Express by jonmck8
    found this about setting up a psp with airport should help:
    "Apple does not mandate that your WEP password is the correct length. In the real world of WEP (non Apple devices) they actually require that your WEP key is a specified length dependent on the bit level of encryption. If you are using HEX or ASCII encoding these passwords can get as high as 26 to 40 characters long. Yea, thats a long pass code! Your Mac sitting in your house doesn't care about all that mumbo jumbo. You can put any old password in the AirPort Admin utility and it will take it.
    I learned over at Gaming-Age that I could get away with a 13 character WEP Key. You should, however, stick with 128 bit WEP as this is better protection, and works well with the PSP (I run my AirPort Express in 802.11b/g Compatible Mode). Once you set your WEP key and update your AirPort you can setup your PSP. Now just setup your PSP for Wi-Fi Infrastructure mode"
    and this:
    The trick is that to use the hexadecimal key with an Apple AirPort Card, you must enter a dollar-sign before the hex number, like
    $1E2B3C4FAA

  • I have a new iMac 27 and a new Blu Ray external drive.

    I have a new iMac 27 and a new Blu Ray external drive. What is the best way to burn a BluRay disk? I read about TOAST etc but they are getting bad reviews. What software is the best? Im running mountain lion of course. Anyone know of good software to burn this type of disk that ACTUALLY works?

    Okay, a couple of things:
    I still use (mostly) an old version of iMovie because it was/is the only version which will process footage losslessly. However, the newer versions are okay - just do not use the automatic share option, but use  the export to quicktime option where you have many options as to quality, size, etc:
    You will wind up with a .mov file you can drag into Toast to burn (or iDVD to add menus and burn). If in iDVD, you can either burn directly (but not bluray) or make a VIDEO_TS folder which can be dragged into Toast - I also use that if I want to keep a copy to burn later as it has all the necessary files so you can ditch or archive all your clips, etc.

  • How can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    how can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    in short - no.

  • HT204370 If I buy a movie on iTunes and burn it to a DVD can I get to to play in a DVD/Blu-ray player?  I haven't had much luck trying to do so.

    If I buy a movie on iTunes and burn it to a DVD can I get to to play in a DVD/Blu-ray player?  I haven't had much luck trying to do so.

    No you cannot.
    You can only make a backup dvd of your movies, fo use in itunes on yur computer.  You cannot burn a video product to dvd to watch on a dvd player, just as you cannot copy a dvd that you purchase.
    "You shall not be entitled to burn video iTunes Products"
    http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • IMac, Airport, and setting up wireless blu-ray player

    I'm trying to hook up an LG BD570 wireless network blu-ray player and was hoping to create the wireless network using Airport on my iMac. I used these instructions:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html
    When I set up the network settings through the blu-ray, it recognizes my network, but it can't connect to it. Can I not use the iMac as a wireless router? The blu-ray is a couple rooms away from the computer, I don't know if that's too far.
    Anyone have any suggestions?

    missuswayne, Welcome to the discussion area!
    Yes you can use your Mac that way. Unfortunately the Mac does not offer the flexibility nor robustness of a dedicated wireless router. Therefore if you have problems there is very little you can do to try to remedy them.
    I suggest that you purchase an inexpensive wireless router instead of using your Mac.

Maybe you are looking for