WRT600N WONT FLASH FIRMWARE - 2 DIFFERENT ROUTERS!!

Is ANYONE running into problems flashing the 600N? I tried the Linksys latest firmware and it just wont upgrade! I JUST retuned one that was confirmed online as being defective - and it wouldn't upgrade. Now I have ANOTHER ONE! The manufacture dates are 1/2008 and 2/2008. I read on anotehr forum of a potential issue with a batch of these... but of course linksys wont admit this...
ANYONE??

I also cannot flash my WRT600N. I noticed, however, that my version is 1.01.35 build 5. The website has version 1.01.35 build 3. Maybe it won't go backwards.

Similar Messages

Hi there, I have MacBook Air (Mid 2012) with OSX 10.8.2. I want to update to latest OSX but it is saying that I need to first install MBA Flash Firmware Update 1.1. When I try to install this firmware, I am told I should have OSX 10.8.3,can some one help?

Hi there, I have MacBook Air (Mid 2012) with OSX 10.8.2. I want to update to latest OSX but it is saying that I need to first install MBA Flash Firmware Update 1.1. When I try to install this firmware, I am told I should have OSX 10.8.3, Each one asking other to update first, can some one help me in this regard ?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Server crashes after router restarts, different routers, same result!

Hello team,
I've had this problem before, and it's getting really annoying.
Every time I restart my router, my server will crash. It's almost always the case. I don't know why. It's not my router, I have tried 3 different routers. I thought maybe my RAM was faulty, that's not the case either.
Any thoughts?
p.s.
my server always assigns its own DNS address to my clients, so when the server crashes, the clients are left without internet. How can I stop this from happening?
setup: Server 2012 Essentials R2, 2 GB RAM, AMD X2 3800+ CPU.
edit: this is the dump file it generates. I just restarted my router again, and exact same scenario:
http://1drv.ms/1xooykW

Hi MetaLRasaM,
For Bug Check 0xC2, it indicates that the current thread is making a bad pool request. For more details, please
refer to following article and check if can help you.
Bug Check 0xC2: BAD_POOL_CALLER
Would you please check if any drivers need to be updated or any Windows Update need to be installed? Please
run sfc /scannow command to scan all protected system files. Any find? If perform a
clean boot, will the same crash issue still exists?
For Event ID 41, please refer to following KB and check if can help you.
Windows Kernel event ID 41 error "The system has rebooted
without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
As you know, troubleshoot this kind of kernel crash issue, we need to analyze the crash dump file to narrow down the root cause of the issue. Please refer to following articles
and check if help you to analyze dump files.
Crash dump analysis using the Windows debuggers (WinDbg)
How to read the small memory dump file that is created by Windows if a crash occurs
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon

Itunes wont update firmware on i phone

itunes wont update firmware on ihpone 3g running 4.2.1 version

Connect iPhone to syncing computer using USB cable.
Start iTunes on syncing computer.
Follow prompts from iTunes to upgrade.

USB-9171 installs as USB Flash Firmware Updater

I have just received a USB-9171 with 9401 module. Trying to install it on a WIndows 7 64 bit Dell Vostro laptop. Already installed is Labview 8.5.1 which has been working fine with a USB-6212 for some time. I installed the NI-DAQmx 9.6 which came with the new 9171, and the Labview 2012 Run-Time as recommended by the update manager. On plugging in the USB-6212 it loaded the driver, recognized it in MAX and operates correctly as before. But on plugging in the USB-9171, the driver loaded by Windows identifies it as USB Flash Firmware Updater. The 9171 does not show up in MAX.
How can I get the proper USB-9171 driver to load?
Thanks - Steve
Solved!
Go to Solution.

This is the original poster again. Just wanted to add additional experience I had with this problem.
After getting the original 9171/9401 to be recognized as described above, I added three new 9171/9401 modules to the system several months later and encountered the original problem again. This time the original 9171/9401 would always be recognized, but the three new ones would not. I upgraded my LV from version 8.5.1 (uninstalling this version) to LV version 2012. Upgraded the DAQ from 9.6 to 9.7. There is a newer version of the MAX configuration utility that was not compatible with LV 8.5, so I needed to upgrade LV AND remove the 8.5 version to get the newer configuration utility to install.
I followed my previous procedure of wiping the configuration and then plugging in the USB modules one at a time. As WillPwr found, I needed to have patience because it didn't happen right away. Even with the configuration wiped, it would recognize the old module right away but not the new ones. This suggests that there is some record of module serial numbers retained even after a configuration reset. But eventually it did recognize them all.

MyDAQ recognized as USB flash firmware

When I look in my Device Manager, my myDAQ is recognized as USB flash firmware, and it is also not recognized in any LabView instruments as it says "No Supported Devices." I've tried updating the driver for the USB, and I've also tried stopping and restarting the NI Device Loader in Services. Neither have worked.
What should I do?
If you ask for information please tell me the steps on how to get it.
Thank You
Emily
Solved!
Go to Solution.

MAX Configuration Report
3/3/2014 5:00:35 PM
MAX Summary
My System
Data Neighborhood
Devices and Interfaces
Network Devices
NI cDAQ-9174 "cDAQ1"
Scales
Software
LabVIEW 2013
LabVIEW Run-Time 2011 SP1 f2
LabVIEW Run-Time 2012 SP1 f3
LabVIEW Run-Time 2013
LabWindows/CVI Run-Time 2010 SP1
Measurement & Automation Explorer 5.5
Measurement Studio for VS2010
DotNET
Common
Common (64-bit)
NI ELVISmx 4.5
NI I/O Trace 3.1.1
NI PXI Platform Services 3.2.3
NI System Configuration 5.5
NI-DAQmx ADE Support 9.8
NI-DAQmx Device Driver 9.8
NI-DAQmx MAX Configuration 9.8
NI-PAL 2.9.1
NI-USI 1.0.2
My System
Operating System
Windows 7 Professional Service Pack 1 (6.01.7601)
Processor
Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz / Intel64 Family 6 Model 42 Stepping 7 / GenuineIntel / 2294 MHz
Memory
5.91 GB of RAM
Disk Space
C:\ 390 GB of 679 GB free
Back to top
NI cDAQ-9174 "cDAQ1"
Property
Value
ProductType
cDAQ-9174
DevSerialNum
0x190B806
DevNotPresent
1
Back to top
Software
Name
Version
Description
Path
CVI Run-Time
10.0.1.434
The LabWindows/CVI Run-Time Engine is necessary to run executables or use DLLs you create with LabWindows/CVI, and it must be present on any target computer on which you want to run your executable program.
C:\Windows\SysWOW64\CVIRTE.DLL
NI-DAQmx Device Driver
9.8.0f0
NI-DAQmx Device Driver
C:\Program Files (x86)\National Instruments\NI-DAQ
NI-DAQmx ADE Support
9.8.0
NI-DAQmx Application Development Environment Support
C:\Program Files (x86)\National Instruments\NI-DAQ
NI-DAQmx MAX Configuration
9.8.0
NI-DAQmx MAX Configuration Support
C:\Program Files (x86)\National Instruments\NI-DAQ
NI I/O Trace
3.1.1f0
Monitors National Instruments API calls
C:\Program Files (x86)\National Instruments\NI IO Trace\NI IO Trace.exe
LabVIEW
13.0.0
Graphical Programming for Measurement & Instrumentation
C:\Program Files (x86)\National Instruments\LabVIEW 2013\labview.exe
LabVIEW Run-Time 2011 SP1 f2
11.0.1
LabVIEW Run-Time Engine
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2011
Measurement & Automation Explorer
5.5.0f0
Use Measurement & Automation Explorer to manage your National Instruments products and services
C:\Program Files (x86)\National Instruments\MAX\nimax.exe
Measurement Studio
Visual Studio 2010 Support - See individual versions below.
National Instruments Measurement Studio Tools for Visual Studio 2010
DotNET
DotNET Software
Common
13.0.40.190
Facilitates the exchange of data between the acquisition, analysis, and user interface portions of an application.
C:\Program Files (x86)\National Instruments\MeasurementStudioVS2010\DotNET\Assemblies\Current\NationalInstruments.Common.dll
Common (64-bit)
13.0.40.190
Facilitates the exchange of data between the acquisition, analysis, and user interface portions of an application.
C:\Program Files (x86)\National Instruments\MeasurementStudioVS2010\DotNET\Assemblies\Current\NationalInstruments.Common.dll
NI-USI
1.0.2
NI Universal Storage Interface
C:\Program Files (x86)\National Instruments\Shared\USI
NI ELVISmx
4.5.0f2
NI ELVISmx
C:\Program Files (x86)\National Instruments\NI ELVISmx
NI PXI Platform Services
3.2.3
Support for NI PXI and PXIe Controllers and Chassis
C:\Program Files (x86)\National Instruments\PXI
NI-PAL Software
2.9.1
NI-PAL Library for Windows
C:\Windows\SysWOW64
NI System Configuration
5.5.0f0
Discover and configure systems and devices
C:\Windows\SysWOW64\nisyscfg.dll
LabVIEW Run-Time 2012 SP1 f3
12.0.1
LabVIEW Run-Time Engine
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2012
LabVIEW Run-Time 2013
13.0.0
LabVIEW Run-Time Engine
C:\Program Files (x86)\National Instruments\Shared\LabVIEW Run-Time\2013

Downloaded matchbook air flash firmware update will not install

downloaded mackbook air flash firmware update will not install

Awesome! I was getting really frustrated by this, but found your post and it worked. Thanks!
I wonder how apple did not come up with a warning when you start the insatllation that would tell you that it would not work with an encrypted disk. These sorts of warnings should be standard procedure. Whatever, finally the red number disappeared. Thanks lemach again!
One small addition: After turning file wault off, you need to reboot before starting the update, otherwise the decryption does not take effect.

My imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

my imac will not connect to wifi what so ever. i have tried 3 different routers and all my other apple devices work fine. when i take it to the genius bar it seems to work with apples instore wifi. thus leading the "geniuses" to say nothing is wrong.

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

How to store flash objects in different location?

How store flash objects in different location?
Is this is possible to achieve?
reply me soon

Hi,
I believe you meant to post your question to the Flash forums: http://forums.adobe.com/community/flashplayer
This forum deals with Flash Access, Adobe's Digital Rights Management solution.
cheers,
/Eric.

DMA2100 Flash Firmware

Is there a way to manually flash firmware, my box acts like it wants to work, but always seems to lock up before i can get into settings. It worked okay to start with, but got much worse. I can get to the boot screen, and have tried resets etc, but can't seem to get any controls to work.

Yeah, so , if you can get to the menu that shows Windows Media Center and Settings, but can't do anything past that.. HOW do you flash the firmware then.
Is there a way to download the firmware and put it on a thumbdrive or something and then force the box to pick it up?
If I do the hard reset I get the ever flashing blue light. If I reset it again quick, then I get the screen where you can select Media Center or Settings... but the controller doesn't actually let me select anything.
Any suggestions?

Internet speed suddenly and drastically reduced through TWO different routers (EA6500 & E2500)

I'm definitely experiencing a bizarre problem at the moment with internet speed (both wired and wireless) through my EA6500 which began suddenly two days ago. The modem directly into the computer continues to yield the normal speeds (about 3.5 Mbps down and 1 up) each time I connect it directly, but putting the router into the equation cuts it to around 0.5 Mbps down and 0.05 up, though the speeds do tend to vary quite a bit. I just assumed that the router was defective, so I grabbed my older and perfectly operational E2500 to put back in its place, but the results were exactly the same. I went through all of the troubleshooting with the cable company up through the modem, and again, the modem continues to deliver the normal speeds directly to the PC. I also swapped all of the network cables around to verify that they're all good, so that's not an issue either, and the firmware on both routers is current. While certainly possible, I have a hard time believing that both routers just happen to be bad at the same time, and I haven't made any changes in the last few days to the network configuration, settings or even the software and setings on my PC. This truly is a baffling problem, and I would greatly appreciate any thoughts on the matter. Thanks.

That interesting the MTU being 1280. That is the typical MTU of an IPv6 tunnel. Is IPv6 enabled on the router? Maybe your ISP has implemented IPv6.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Html from flash 9 WAY different than flash MX

Does flash 9 do something majorly different with ActiveX or
something?
After "publishing" a flash 9 slide show to html, it shows NO
swf content in dreamweaver. Yet this show plays. Problem is, it
wont align and now there is no alignment options, even tho the code
says center.
There is also a lot of code for accessibility, and detecting
flash player #?
Can I "downgrade" this show to flash MX? It wont open in
Flash 9 (CS3) now so i can't just do it the old way.
It's all action script 2
Anyone?

in flash cs3 create AS2 document instead of AS3

Power LED flashes, firmware updates good, and can still access the router

I have a wrt54G first version as there is no version number. About two months ago, the power led started dropping out and with a reset worked for a day or so, then, it became worse, every hour, and now only a couple of minutes. according to the help side of this site, the router will not be accessible, but it is. I upgraded to the 4.7.1.1 firmware, the problem continues, un plug and start it up. Any ideas? Could it be the 12 volt power supply going bad or over shooting the power?

yes, that is the level, verified at the router. the help side of this site says that if the led flashes like this that it would be corrupt an un accessible, but a restart of the router stops it, and it is accessible, moreover, the upgrade fails since that is the level at the router. just that it is happening about every 15 minutes (8/3) - could it be that comcast is sending packets of ??? to blow out routers? Thee state they don't like people using routers - that you are not supposed to use more than one computer with their broad band connection. Yes - serious, the e have said this twice in the last 6 months. Don't know what it could be, Saturday - Sunday it has not dropped out at all

Using Cisco Connect with 2 different Routers

I have the linkys n300 E1200 at my office and the Linksys E1000 at my home. How do i configure Cisco Connect to work with both of these routers so i don't have any connectivity issues?

You can only have one Cisco Connect software installed on your computer. What are your challenges with the Linksys routers? Are you experiencing slow connection? Or intermittent connection? Does it occur on both routers? Since the two routers are on two different locations, we need to properly isolate this matter to know what is really causing it.
Updating the router's firmware will help in resolving connectivity difficulties. If the wireless connection drops, you can also try adjusting the wireless channels of the router. I am using channel 9 for my EA4500 router. Make sure as well that the router is being placed on a higher location or less interference area.
Share more details about this matter. Community users are here to help.
Help, learn and share

WRT600N WONT FLASH FIRMWARE - 2 DIFFERENT ROUTERS!!

Similar Messages

Maybe you are looking for