Wrt600n / wpc600n random disconnect issues

hi,
i've been running the new AP / cards for a few weeks now, and am seeing some weird behavior on them.
when connected to the AP using either vista (using windows to manage wireless setting), or in xp (using the linksys utility), i'm getting random disconnects. the wireless connection will just drop from 1-10 seconds, then reconnect on it's own.
for these connections, i am forcing the AP and cards to use the n band.
the AP is set to N mode only, and all other settings on the AP are set to Auto. the clients are using all default settings as well, and this issues occurs during web surfing, email, etc. and is repeatable.
any suggestions?
Message Edited by d-rick on 01-20-2008 09:50 AM

r u using the linksys adaptor on vista or on xp
if ur using it on vista
please download the drivers for vista from
www.linksys.com/vista
live life king size

Similar Messages

Bluetooth and Plantronics Legacy random disconnect issues

I've been using the latest MAXX with the latest Plantronics Legacy headset. Randomly, bluetooth will disconnect, the call will remain active but does not automatically failover to either handset or speaker option (literally the call is active and I'm in limbo). The only way to reengage with the caller is to press speaker, then to make matters worse, the phone will start cycling through headset, bluetooth, speaker etc. until the call ends! When I recycle the phone and bluetooth the problem goes away, then reappears randomly (days or a week later). Anyone having this issue? Any sense on it being related to the phone or bluetooth? I've installed the latest drivers for both and I'm now going to cycle the phone daily in the event it's a caching issue somewhen in between the OS's. Either way, Motorola or Plantronics need to make a better thing...

Hello DCJW,
Bluetooth headsets are a great way to communicate, especially while on the go. It will be my pleasure to assist with getting your Plantronics earpiece to work properly. First, may I ask is there any physical or liquid damage on the Bluetooth or the Droid Maxx? Also, what software and android version do you have installed on the Maxx? Can I assume that the Plantronics Bluetooth earpiece is the only Bluetooth device profile that’s connected to the Maxx? I would suggest unpairing the earpiece from the phone, then reboot the device, and re-pair the earpiece. Once you have done so then please retest an post your findings. I’m looking forward to your reply.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

My phone will randomly disconnect from the wifi and when I retype the password it says it is wrong. It will eventually work but I have to wait for a message to pop up on my screen to allow me to retype the wifi password.

When I first got my phone it worked perfectly fine with the wifi. Although later on I began to have problems connecting it. It will randomly disconnect from the wifi and when I try to retype the password it tells me it is wrong, although it is right. It will eventually work but in its own time, a message will pop up and allow me to type in the password and it will work. But sometimes it takes an hour or more and sometime it takes 10 minutes. I've seen where other people have had this problem but I don't know how to fix it. I'm not sure if it's an issue with my phone or if it's with my wifi. Does anyone know how to fix this?

Does this happen with all Wi-Fi hotspots? A specific one?
Have you tried forgetting the Wi-Fi connection and then reconnecting to it?
What about power cycling the Wi-Fi router?

Undocumented 'random disconnection' from manually connected wireless

I have got a USB-N13 wireless-N300 dongle.
According to 'lspci -k' I have the drivers, and I have a wireless interface. So I know that my dongle has drivers but I don't know if they work 100% well.
I will show the output of various normal commands:
$ iw dev wlp5s0u1 link
Connected to <mac address> (on wlp5s0u1)
SSID: <ssid>
freq: 2437
RX: 19939057 bytes (111695 packets)
TX: 319269 bytes (2813 packets)
signal: -50 dBm
tx bitrate: 7.2 MBit/s MCS 0 short GI
bss flags: short-slot-time
dtim period: 0
beacon int: 100
$ ip link show wlp5s0u1
3: wlp5s0u1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether d8:50:e6:f4:33:24 brd ff:ff:ff:ff:ff:ff
$ dmesg -w
[ 6.634808] r8169 0000:04:00.0 enp4s0: link down
[ 6.634847] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 6.636405] rtl8192cu: MAC auto ON okay!
[ 6.648784] rtl8192cu: Tx queue select: 0x05
[ 7.006529] IPv6: ADDRCONF(NETDEV_UP): wlp5s0u1: link is not ready
[ 8.751113] wlp5s0u1: authenticate with <mac address>
[ 8.774294] wlp5s0u1: send auth to <mac address> (try 1/3)
[ 8.792882] wlp5s0u1: authenticated
[ 8.794125] wlp5s0u1: associate with <mac address> (try 1/3)
[ 8.815636] wlp5s0u1: RX AssocResp from <mac address> (capab=0x411 status=0 aid=4)
[ 8.815672] wlp5s0u1: associated
[ 8.815712] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0u1: link becomes ready
[ 265.580381] type=1006 audit(1394469140.822:2): pid=253 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 265.639231] type=1006 audit(1394469140.882:3): pid=495 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 272.723778] fuse init (API version 7.22)
[ 291.938590] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 291.981059] ISOFS: changing to secondary root
[ 385.885587] hda-intel 0000:00:1b.0: Unstable LPIB (130824 >= 8192); disabling LPIB delay counting
[ 423.970540] r8169 0000:04:00.0 enp4s0: link up
[ 423.970548] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
This is all the information from when I fist see an wireless interface.
All, I can tell is that my wlp5s0u1 doesn't go down, but a few seconds before I plug in my wireless bridge, or enp4s0, my 'Internet stops...' Or I can't search google, and my youtube stops streaming, conky says that about 30bytes get transfered from that point on, and there is no errors?!
I'm not on a laptop, and my device's power saver is set to off. And as I'm not getting the second error I don't know how to fix this.
$ iw dev wlp5s0u1 get power_save
Power save: off
(Sorry if this is blatantly obvious, I've only had arch for under a month, with no prior Linux experience, and my dad can't help me with it too!)
EDIT:
Please can someone please tell me something that I can try or look into to resolve this, I have a useless dongle now, and an Internet connection that drops at least 50% of the packets.
Last edited by Peilonrayz (2014-03-12 17:18:43)

Unfortunately, join the crowd ....
Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
Intermittent WIFI with Leopard on Macbook
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
New MacBook Pro & Leopard - Airport Connection problems
http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
Airport random disconnect
http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
... that's a couple of the major threads about this issue, that has been going on since June.

Random Disconnection From My Wireless Access Point

I got my MacBook a few weeks ago, wand I'm loving it... for the most part.
Info: I've been using my Linksys WRT54G router for years. I've never had a problem. I currently have a desktop Mac connected to it along with my MacBook, and the connection on the Mac is fine.
*The problem:* My MacBook doesn't hold a steady connection to my router, even when I'm just mere feet away.
*What happens:* I have a very strong connection on my WiFi with the built-in AirPort. Then, a few seconds later, all of the 4 bars drop to 0 for a few seconds, jump back to 4, go back down to 0... you get the picture. I find this frustrating, as the internet may shut down for a minute at a time, regain connection for a few seconds, and then lose connection after about 10 seconds. I am unable to use iChat (it shuts down whenever I lose connection), or easily browse the internet.
*I know it's not the router. My desktop Mac connects with ease. Should I take my MacBook to a Genius Bar?*
Message was edited by: Pickleman

Unfortunately, join the crowd ....
Wifi connection bad since upgrade to 10.4.10 (SAME PROBLEM IS IN 10.5)
http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0&start=0
Intermittent WIFI with Leopard on Macbook
http://discussions.apple.com/thread.jspa?threadID=1231631&tstart=0
New MacBook Pro & Leopard - Airport Connection problems
http://discussions.apple.com/thread.jspa?threadID=1200966&tstart=0&start=0
Airport random disconnect
http://discussions.apple.com/thread.jspa?threadID=970070&tstart=15&start=0
... that's a couple of the major threads about this issue, that has been going on since June.

Network drives randomly disconnecting, unable to reconnect

I have been having an issue with network drives randomly disconnecting. When I try and reconnect using the Connect to Server dialog, the share is greyed out. My current workaround has been to open up terminal and run umount /Volume/Share_Name, and I am able to connect again afterwards. This is happening multiple times a day, and across multiple servers. I have poked around the forums and seen some people with similar issues, but the solution of connecting with cifs:// instead of smb:// has not made any difference.

which ultimately means apple didn't do enough testing before releasing the last patch
This is not always, and may not be, the case. What many don't realise is that many 3rd party developers stray from the 802.11 series specifications in an attampt to boost speed and get one up on their competitors. For instance D-Link, amongst others, use a short preamble setting by default in some of their routers to improve performance. However, this is non-standard and when it comes across wireless network adapters that don't support this then you have problems. They assume that their network adapters are being used for "maximum speed and compatibility". Whether Apple should or should not support a short preamble is another subject altogether.
However, I do agree with you in that Apple should put more work into their Airport software.

CUCM Random disconnect errors

I have a client who is getting random disconnect errors from his cucm servers. They seem to encompass other network errors at times as well, but not always. I'm having a hard time telling if its cucm or if it is a network issue in general.
I pulled his core logs and at the time of disconnect messages from RTMT I'm seeing this:
|StationInit:   TCPPid = [1.100.9.58957]Socket Broken. DeviceName=SEP002584189723,IPAddr=10.100.7.49, Port=0xc702, Device Controller=[1,51,5397]|1,100,50,1.20646898^10.100.7.49^SEP002584189723
11:35:48.006 |StationInit:   TCPPid = [1.100.9.58948]Socket Broken. DeviceName=,IPAddr=10.101.1.42, Port=0xcbf2, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.050 |StationInit:   TCPPid = [1.100.9.58250]Socket Broken. DeviceName=,IPAddr=10.101.1.112, Port=0xc436, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.067 |StationInit:   TCPPid = [1.100.9.59376]Socket Broken. DeviceName=,IPAddr=10.101.1.16, Port=0xc55e, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.099 |StationInit:   TCPPid = [1.100.9.58840]Socket Broken. DeviceName=,IPAddr=10.101.1.8, Port=0xc577, Device Controller=[0,0,0]|1,100,55,3.1^*^*
The Cisco UP Presence Engine service on the peer node of a subcluster has failed AppID : Cisco Syslog Agent ClusterID :
|StationInit:   TCPPid = [1.100.9.58957]Socket Broken. DeviceName=SEP002584189723,IPAddr=10.100.7.49, Port=0xc702, Device Controller=[1,51,5397]|1,100,50,1.20646898^10.100.7.49^SEP002584189723
11:35:48.006 |StationInit:   TCPPid = [1.100.9.58948]Socket Broken. DeviceName=,IPAddr=10.101.1.42, Port=0xcbf2, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.050 |StationInit:   TCPPid = [1.100.9.58250]Socket Broken. DeviceName=,IPAddr=10.101.1.112, Port=0xc436, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.067 |StationInit:   TCPPid = [1.100.9.59376]Socket Broken. DeviceName=,IPAddr=10.101.1.16, Port=0xc55e, Device Controller=[0,0,0]|1,100,55,3.1^*^*
11:35:48.099 |StationInit:   TCPPid = [1.100.9.58840]Socket Broken. DeviceName=,IPAddr=10.101.1.8, Port=0xc577, Device Controller=[0,0,0]|1,100,55,3.1^*^*
and lots of them, for a few minutes and then it stops. When I search around for solutions for this I see "contact TAC" repeatedly. Can anyone help me determine if I have a cm problem or a network problem. He did reboot the cluster 12 days ago and it didn't stop the problems. The disconnect errors related to all components of the phone system (cucm, cuc, uccx, cups) and have been anything from "SDL link to remote application is out of service", "OUT-OF-SERVICE AppID : Cisco UP Presence Engine ClusterID", "
The Cisco UP Presence Engine service on the peer node of a subcluster has failed AppID : Cisco Syslog Agent ClusterID", "user 2 ntpRunningStatus.sh: Primary node NTP server, SVUCCX01, is currently inaccessible or down"
So its just like all communication breaks and then comes back again. I'd like to do as much leanring as possilble with this and not just run to TAC. Any suggestions?

Hi Dustin,
Please see the explaination for the error you are getting:-
CCM_CALLMANAGER-CALLMANAGER-1-SDLLinkOOS : SDL link to remote application is out of service Remote Application IP Address [String] Unique Link ID [String] Local Node ID [UInt] Local Application ID [Enum]Remote Node ID [UInt] Remote Application ID [Enum]
Explanation   This alarm indicates that the local Unified CM has lost communication with the remote Unified CM. This alarm usually indicates that a node has gone out of service (whether intentionally for maintenance or to install a new load for example; or unintentionally due to a service failure or connectivity failure).
Recommended Action   In the Cisco Unified Reporting tool, run a CM Cluster Overview report and check to see if all servers can communicate with the Publisher. Also check for any alarms that might have indicated a CallManager failure and take appropriate action for the indicated failure. If the node was taken out of service intentionally, bring the node back into service.
Reason Code - Enum Definitions
Enum Definitions - LocalApplicationID
Value
Definition
100
CallManager
Enum Definitions - RemoteApplicationID
Value
Definition
100
CallManager
The most common Lost communication for CallManagers could be Callmanager server hang, network problems or high CPU
You can use RTMT to monitor this.
CM servers keep a TCP connection to other servers in the cluster. When that TCP connection is broken due to network connectivity or lack of server resources, the above error is generated.
Also the sdi traces you have provided won't be useful to analyze the problem but rather please take detailed sdl traces.
If possible then take SDL detailed traces with sniffer filtering TCP port 8002 in order to find out if this is a Network problem or not.
Sometimes due to highly fragmented disk can cause heavy disk I/O utilizing all the CPU.
Was there any upgradation or migration activity was carried out in network?
Please check the server NIC and switch NIC or other NIC have the same speed/duplex settings.
Regards,
Nishant Savalia

ESATA HDD Random Disconnect SOLVED!!!

Fellow ThinkPad owners:
I've spent the greater part of the past two days trying to resolve the issue of my eSATA connected ThinkPad 500GB SHDD's tendency to randomly disconnect itself. I had just gotten my new W520 with Windows 7 64bit preinstalled, and was happily working away (I'm a banking applications developer) when out of the blue I would get a ThinkVantage message asking me to recover my current files to the C:\ drive. To my surprise and dismay, I noticed that this was occurring immediately after my HDD had "dropped" off MyComputer's list of available drives! I spent all day on the phone with Lenovo tech support to no avail. I did notice, however, that opening the ThinkVantage ToolBox (PC Doctor application) was a surefire way to cause the HDD to "drop" off immediately.
SOLUTION:
Uninstall ThinkVantage Toolbox!
The problem has now ceased, and I've also noticed that the fan in the W520 is not nearly as overactive as it had been while the ToolBox was running in the background.
Come on Lenovo, don't saddle us with additional bloat that actually impedes proper function of the **bleep** hardware!
And to PC Doctor, I suggest heeding the Hippocratic Oath: "FIRST, DO NO HARM"!!!!
Danny

Thanks for posting your fix...
I agree, ThinkVantage Toolbox has gotten pretty invasive as of late. It has also become less useful, although you can install custom add-on modules to make it better. Anyway, it is possible to keep the program installed w/o having all the background tasks. This leaves the Blue ThinkVantage button active.
Install TVT
Launch TVT, Settings, then untick "Enable Quick Hardware Check", Save
right click on task bar and uncheck TVT
run taskmgr.exe
Disable PCDEventLauncher, PCDoctorBackgroundMonitorTask, and SystemToolsDailyTest
PCDEventLauncher will most likely be recreated if/when you next run TVT- but it is of little conequence.
Also, are you are using AHCI? It is required for eSATA hot plug (+ some other features). We have had systems that refuse to keep a eSATA drive connected when running in compatible mode.

CUPC random disconnect

Hi,
I have a few people who have been saying that their CUPC client randomly disconnects and they can't reconnect for a long time, even through reboots. I have a feeling that it's somehow an LDAP timeout, but I don't know. Regular ethernet and phone connectivity remains normal. I have attached the problem report from one of the people. Can anyone decipher what might be happening?

Do you happen to have a timestamp when you saw this issue? There are quite a few log files in here.
--Matt

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.

After updating 8.1 , wifi still randomly disconnect sometimes. It never happened to me when i had iphone 4. That's really hard to accept.
Is it worth 900 dollars for a smartphone that has so many issues ? After 3 updates? After 1 month? I wasted 2 gb of mobile internet cause of ios 8.
And battery is terrible.

same here, iphone 6 plus 64 gb.
additionally in 5 ghz networks the wifi connection is very slow or there is no data transfer possible ( the wifi icon is already there and in a good status) other devices hasn't any problems in that network

Second Exchange Mailbox Random Disconnects In Outlook 2010

We have our users temporarily using two exchange mailboxes in Outlook 2010. The primary account is fine (exchange is local) but the second account we recently adds seems to randomly disconnect and not automatically reconnect. The fix at the moment
is to reboot the computer and everything works fine but this is obviously annoying to the users.
Anyone else run into this issue or have a suggestion?
Thanks in advance.

Hi,
I recommend using separate profiles for each account if they are using a same one.
When the second mailbox cannot connect to Exchange server, it will leave some information/warning/error in the App log. Please post the details if there is any related content.
Thanks
Mavis
Mavis Huang
TechNet Community Support

WRT54G version 6 random disconnects

I have upgraded the firmware, reset, rebooted, everything the non english speaking tech support told me. The router still randomly disconnects. The only way to fix it is to reboot it. HELP. I am a gamer, and cant have this.

LOL.... been there... done that. Modem is fine. I've sifted through these forums and the FAQ's before I made a post. All the noob steps have been done man. Trust me. I did come across somewhere else though that the newer versions of this modem are made with less memory and therefore may be a hardware issue that can't be fixed. Is this true?Message Edited by Mojofoot on 02-12-200707:40 PM

Bonjour Gateway - Airplay / AirServer - Random Disconnects

I am experiencing random disconnects during an Airplay session to AirServer. Airserver disappears from the screen and Airplay session is gone. Here is the details of my setup:
WLC 5508 7.5.102.0
1142n APs
AirServer (1.9.4) installed on wired PCs.
Wireless clients (iOS Devices 7.x and 6.x) use Airplay to mirror to the PCs running AirServer.
APs are in mDNS mode and snooping the vlan the PCs reside in.
Wireless clients in separate BYOD WLAN.
Enabled bonjour gateway and mDNS AP (trunk mode)
http://www.cisco.com/en/US/docs/wireless/technology/bonjour/7.5/Bonjour_Gateway_Phase-2_WLC_software_release_7.5.html#wp44311
Enabled videostream
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080b6e11e.shtml
Verified via packet capture the client traffic is being marked for QoS (and Gold enabled on BYOD WLAN)
Differentiated Services Field: 0x80 (DSCP 0x20: Class Selector 4; ECN: 0x00: Not-ECT (Not ECN-Capable Transport))
This is an intermittent issue. I can play a YouTube video for 60 mins with no issues sometimes. Sometimes the disconnect happens. WLC mdns error debug output does not look significantly different when the crash happens.
Any thoughts? Similar experience?

Alright, long story short: Got a wirless repeater, set the printer up to connect wireless, now everything works fine, including AirPrint.
Btw.: Even though it says it is not possible, it is actually possible to access the printer via WLAN and LAN (wired) simultaneosly.
Thanks anyway. I think this can be marked as solved

WAP321 random disconnecting clients

Hi all,
I'm having problems with my WAP321 that is randomly disconnecting clients. It's not disconnecting all clients, but just a couple of clients. It's random which clients get disconnected and it can be different clients that will be disconnected when it happens a couple times, but they do get disconnected at the same time.
My setup:
Cisco ASA5505
|
Cisco WAP321
|
Cisco 7925 phone - iPhone - Macbook - three IP cam's (different brands) - and some more clients
Last time it occurred I just for sure changed DHCP server from Cisco ASA5505 to two windows servers, now it happened again, my 7925 started beeping (enabled SSID monitoring on it so it alerts when it isn't connected to my Callmanager) and my iPhone couldn't connect to the SSID. My Macbook was still just connected. Retrieved a diagnostics report and checked the logging, rebooted the WAP321 and everything started connecting again.
Noticed screens are scaled so hope it's readable...
The MAC address is my iphone. I turned off the 7925 because the beeping was annoying so no logging from the 7925 trying to connect.
Logging is saying:
assoc request from [mac] BSSID [bssid] SSID LEVELS
STA [mac] deauthed from BSSID [bssid] reason 3: STA is leaving IBSS or ESS
There is nothing wrong with the coverage, the WAP321 is about ten feet from the iPhone and Cisco 7925 phone
Can anybody help me how to best troubleshoot this issue. I'm not familiar with the troubleshoot/debug options available for the WAP321

Dear Wesley,
Thank you for reaching the Small Business Support Community.
There is an opened caveat on the latest firmware release, version 1.0.4.2; CSCue24521:
-Symptom: Some clients may lose wireless connection when authenticating via Captive portal.
-Workaround: Reconnect wireless devices.
If this is not the case I'd like to know if you have tried using a different IEEE 802.11 standard, same as a different authentication type. If you are not running the latest firmware release I then suggest you to, and something else I've seen from experience that fixes similar issues is to reset to factory conditions and reconfigure manually.
http://software.cisco.com/download/release.html?mdfid=284152656&softwareid=282463166&release=1.0.1.10
I hope you find this information helpful and please do not hesitate to reach me back of there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Please help! iMac randomly disconnects from internet. Wi-fi via BT hub. I am baffled by all of the suggestions when I google this problem! Any simple solution? Thanks!

Please Help! My brand new imac randomly disconnects from the internet. We have a BT hub - wi-fi. I have googled this issue and see that it is relatively common and it is incredibly frustrating. sadly, I have been unable to wade through the suggestions others have had as to how to solve the problem as i have no technical knowledge and am basically baffled by the list of suggestions. Please can anyone explain why this happens and what to do? It is fairly simple to reconnect each time but it is driving me mad having to. It generally happens when the computer is asleep but sometimes in the middle of doing something. Thanks!!!!!!

What frequency, security are you running? It would have been helpful if you specified in the first post.
Did you create a new Location in System Preferences->Network pane, Location pull-down. Create a new custom named Location. Then after you create that new Location click on the 'Apply' button to save that new custom named Location. See if that helps.
Lastly a lot of people have reported that WEP in lion is problmatic and it would be better to use WPA2 if you can.

Wrt600n / wpc600n random disconnect issues

Similar Messages

Maybe you are looking for