WRT600N WRT310N PPTP will not work in some cases

Hello All,
This is more of a warning than a request for help. If you are using the WRT600N or the WRT310N and you need to use PPTP VPN connections, these are not the routers for you!
The PPTP support only work with MS PPTP Servers, it does not work with other VPN routers such as Nortel Contivity's and others.
Please read other threads in this forum, in most cases the wireless connectivity does not work properly, and the router is prone to freeze, requiring it to be hard booted often.
(Mod note: Edited due to non-compliance to forums guidelines.)
Message Edited by OnnagokorO on 05-24-2008 08:37 PM

Just to update everyone... Firmware Version 1.01.36 Build 3 does not fix the PPTP issues with the WRT600N router.

Similar Messages

  • Paste and match style does not work in some cases

    Dear Sir
    My "Paste and Match Style" does not work with some sites.

    What happens if you put table Table_1 into the Analytic View?
    Also go ahead and and update HANA, Rev.60 is very old by now.

  • Print: pageDialog will not open in some cases

    Hi,
    i have problems with my print code...Normaly a page dialog comes up, but not in all cases. The printer i have the problem is a network printer set a default in the win xp printer dialog.
    The program is shipped already (in version 4!) to several customers and i have only 2 calls from not working printers...The printers are all new ones:
    HP DeskJet 5940
    Brother HL 1670N
    The program uses the jre 1.4.2
    Heres my code:
    PrinterJob job = PrinterJob.getPrinterJob();
    Book bk = new Book();
    PageFormat pform = job.defaultPage();
    Paper page = new Paper();
    page.setSize(595, 841);
    page.setImageableArea(28.349, 28.349, 538.29, 784.28);
    pform.setPaper(page);
    pform.setOrientation(PageFormat.LANDSCAPE);
    pform = job.pageDialog(pform);
    //here i add the pages...
    job.setPageable(bk);
    if (job.printDialog()) {
         try {
              job.setJobName("jobname");
              job.print();
         } catch (Exception ex) {
              System.err.println(ex.toString());
         }//catch
    }//ifThats it, nothing special. I also tried following with an extra program:
    PrintService[] services = PrinterJob.lookupPrintServices();
    for(int i=0;i<services.length;i++) {
         System.out.println(services.getName());
    With that code, the printer will be listed. So i think there must be an other problem, but what......
    Can anyone give me some tipps?
    Thanks!
    Best regards
    Matthias

    Just to update everyone... Firmware Version 1.01.36 Build 3 does not fix the PPTP issues with the WRT600N router.

  • Imessage will not work with some contacts

    Hi there,
    I'm new to iphone and need help with imessage. I can imessage and face time my wife, although it's always a blue bubble wether I'm on wifi or not. My brothers has an iphone which will imessage sometimes but will never connect for face time.
    Is imessage spouse to work only when both phones are in wifi? Is there any way to force it into an imessage rather then SMS? Vodafone nz have told me that every time I turn it off and on again, I am charged. Is that normal?
    I've tried that anyway, I've tried rebooting the phone, it just does what it wants all the time.
    Thanks for the help

    1. Both devices have to be running iOS 5.*
    2. Internet latency can delay iMessage connection.  If you enabled "Send as SMS", the phone will switch to SMS if iMessage doesn't connect quickly.  If you disable Send as SMS, more of your messages will go through as iMessage.

  • After update to version 12, iTune will not work on some of my idevices. Please help!!

    I have total of 7 iDevices (iPhone + iPad), after I update iTune to the latest version which is v12 then only 2 of my iPad 4 can performed the update the rest were not recognize by iTune.

    list your iDevices by:
    the ones that Don't work
    the ones that Do work
    be sure and give corresponding iOS versions
    ÇÇÇ

  • "GRANT EXECUTE ANY PROCEDURE TO " does not work in some cases

    Hello,
    I some of my PL/SQL-packages I'm using DBMS-packages.
    Because I don't want to grant access for every single package, I granted EXECUTE ANY PROCEDURE to the user/schema of my packages.
    This did work in several installation.
    But for what reason ever, in one installation DBMS_RANDOM cannot be used (DBMS_RANDOM must be declared). If I explicitly grant execute on this package, it works. When I revoke it and renew the ANY PROCEDURE, it doesn't again.
    What's wrong.
    Version 11.2.0.2 on Win2008R2
    Regards,
    Mynz

    Mynz wrote:
    Hello,
    I some of my PL/SQL-packages I'm using DBMS-packages.
    Because I don't want to grant access for every single package, I granted EXECUTE ANY PROCEDURE to the user/schema of my packages.
    This did work in several installation.
    But for what reason ever, in one installation DBMS_RANDOM cannot be used (DBMS_RANDOM must be declared). If I explicitly grant execute on this package, it works. When I revoke it and renew the ANY PROCEDURE, it doesn't again.
    What's wrong.privilege acquired via ROLE do NOT apply within named PL/SQL procedures/functions

  • How do i stop firefox from trying to go to version 7? if will nto work with some of my SW thus i do not want it. better to uninstall firefox?

    it keeps popping up to tell me to update. yet when i check what it works with and known issues, it will not work with some of the things i use. thus how do i stop firefox from this regual reminder?

    Tools\Options\Advanced..._ and in the "advanced" windows go ot "Update" tab,
    UNCHECK the "Update Application\browser/firefox"
    http://i56.tinypic.com/o5q2b5.jpg

  • Tried Everything - Boot Camp will NOT work!

    Hello everyone, for about the past 7 days, I have tried installing boot camp on my macbook pro late 2011. My MBP Has an hdd in the optical drive bay, and a hybrid drive in the hdd bay. Recently, after the failure to install boot camp the first few times, I bought an enclosure for my optical drive. I have a copy of windows online in iso format, so everything should be working, but, it has not. I have tried using a bootable usb flash drive, with SEVERAL different ones, to no avail. I have made boot camp look as if I had a MBA, to no avail. I have burned a bootable iso to a blank cd, to no avail. NOTHING HAS WORKED. I have waited around 32 hours of work in 7 days to post onto this website, thinking I can do it myself, but  I simply cannot. When I did the bootable usb drive method, I got a please insert the bootable disk, and then press any key. And then when I did the bootable blank dvd with a bootable iso on it, all my mbp would do is blink that cursor thingy on the black screen. EVERY single usb drive was taken out for the computer. The only things plugged in were my charger, and the external optical drive bay. Please help me with any useful info, as it would help me so much.
    P.s. I have also used Wine/Crossover. I am ONLY doing this so I can game windows games on Steam. It is the sole and only reason for this venture. Crossover did not have enough support for the games I wanted to play, and would crash often, and Wine will not work with some of the newer games, with very little support/incentive from developers. Please if I have done something wrong by trying to use these, or maybe I'm just not using them right, please tell me.
    If anyone has any other solutions to windows games played on a mac through steam, please tell me, It would mean a lot.
    This has been a very frustarating adventure, and I really would love to get this resolved. Whoever gives the advice that ends up working, will get best answer. Thanks!

    If you had done any google searches for installing Windows on your model Mac computer you might of found out that Windows will ONLY INSTALL from the BUILT IN DVD drive when it is installed INSIDE the system. So since you have replaced that drive with a hard drive there is absolutely NO WAY to install Windows on your Mac. It will not install from a USB key, It will not install from an external DVD drive, it will not install from any other source other than the built in DVD drive when that drive is installed INSIDE the system.

  • Safari will not work due to blocked site

    I am trying to use my Safari browser a blocked site keeps showing up...genio.com???

    The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
    Fix Some Browser Pop-ups That Take Over Safari.
    Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
    Quit Safari
    Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
    Relaunch Safari
    If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
    This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.

  • On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work.  I have to click on some other part of the screen and then it will.  This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

    Start up in Safe Mode.
    http://support.apple.com/kb/PH4373

  • The keyboard for my iMac 9, 1 got wet and is not working correctlly. Delete,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I c

    The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?

    Buy a replacement keyboard. They're only $50-65 USD.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • TS1362 I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!

    I downloaded two cd's last night and I am un able to play some songs cause it tells me I am this computer is unauthorized to play some songs,I did what it said about going to store to get authorized and still will not work,not happy at all!  I NEED HELP OR MY MONEY BACK NOW!

    There seems to be an occasional issue with downloads from the store. They prompt for authorization when they are in fact corrupt/incomplete in some fashion. Try deleting the problem tracks (do not hide from iTunes in the cloud), close iTunes and reopen, go to iTunes Store > Qucklinks > Purchased > Music > Not on this computer. Select a few tracks to download then click the icon that appears at the top-right of the iTunes window.. Untick the box that reads Allow simultaneous downloads. Proceed with the rest of your eligible purchases.
    If you still have a problem use the Report a problem links in your account history to contact the iTunes Store support team.
    tt2

  • SOME OF THE KEYS ON MY KEYBOARD WILL NOT WORK PROPERLY. HOW DO I FIX THIS? I NEED MY COMPUTER ASAP AND APPLE WILL NOT TALK TO ME ON THE PHONE UNLESS I PURCHASE APPLE CARE WHICH I CANNOT AFFORD.(SORRY FOR CAPS ONLY WAY I CAN USE ALL KEYS)

    can anyone help me? my a key, z key, q key, anf backapace key do not work for some reason and when they do it just types out a bunch if random letters and symbols. im not sure how to fix this but apple wont talk to me unless i lirchase something and i can afford to do that. need this comp to work for achool isnthwre a way tonremive keys ans see whats wrong?

    Fast answers:
    1. Try resetting NVRAM/PRAM and SMC. Doesn't usually 'cure' keyboard problems you report, but it costs nothing and only takes a few minutes.
    https://discussions.apple.com/thread/3819550?start=0&tstart=0
    2. Try plugging in a USB keyboard. Doesn't absolutely have to be a Mac keyboard. A PC keyboard will work for a test. If the typing problem does not occur with the USB keyboard, you have a temporary solution until you can arrange to visit a repair facility.
    3. If your MacBook is older and has a user-removable battery, shut down the computer, remove the battery, and examine it for signs of 'bulging' or swelling. Then connect the computer to the Magsafe power supply, without reinstalling the battery, and turn it back on. If the keyboard problem has gone away, it was likely caused by a swelling battery.

  • Installed Mavericks and latest iWorks and some fonts will not work. Strangely these fonts work in Notes and old version of Strickies. Any ideas?

    Installed Mavericks and latest updates for iWorks. Some fonts will not work on Pages or Keynote. Any ideas?

    It appears overkilling to install Bootcamp and a complete Windows environment just for running a single, old-fashioned piece of software...
    Old 32-bits Windows programs usually run fine with WINE, of which I warmly recommend the "PlayonMac" version (free).
    http://www.playonmac.com
    Just try with Playonmac...
    If it does not work, try the other free WINE port for Mac, Winebottler:
    http://winebottler.kronenberg.org/
    If even this does not work, there is a not-free WINE port named Crossover:
    http://www.codeweavers.com/products/crossover-mac/
    It has a free trial mode, so you can test if it works with your scanner program before purchasing it...

Maybe you are looking for