WRT610N 2GB limit for file transfer

I recently bought a WRT610N. I setup the storage link with a 16GB USB flash drive. When tranfering files to the drive from one of the networked computers it gets to 2GB exactly then the WRT610N shuts down the connection and the file tranfer fails. I can mount the flash drive directly and tranfer any file size - then put the drive back on the WRT610N and it will allow that file to be copied off so I am sure its not the flash drive. I have also tried multiple computers - and the transfer always stops at 2GB. FAT32 has a 4GB limit - so, I'm not hitting the file system limit. I am using the latest firmware from 1/21/2009 - which specifically mentions solving problems with large file transfers.
Is anyone having the same problem ort know a fix for it?
Message Edited by webstep1 on 03-29-2009 07:36 PM
Solved!
Go to Solution.

This is a file system issue. FAT32 sometimes has a maximum file size of 2GB.
Try reformatting the drive to NTFS, this will fix it.
Unfortunately NTFS is sometimes unreliable and officially unsupported acording to the knowledge base (see answer id 17144), but sometimes you can get it to work
Message Edited by miek2 on 04-01-2009 02:38 PM

Similar Messages

Which protocol we should use for file transfer in ios ?

which protocol we should use for file transfer in ios ?

My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

Steps for File Transfer through FTPS...!!!

Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
Krupakar

Hi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar

Size limit for files uploaded to htmldb_application_files

Hi,
Is there any size limit for files which are to be uploaded to htmldb_application_files (and then stored as BLOB in db)?
Regards,
Tom

Hi Tom,
the only limitation is that the BLOB data type is 4GB
large.
So you can store max. 4 GB data in BLOB.Did you mean BFILE? Depending on the version, size limit is between 8TB and 128TB, as in the 10g2 documentation:
PL/SQL LOB Types
C.

Urgent: Error: Client routine fdpvwr failed to prepare for file transfer

Hi Recently i have upgraded developer 6i by applying patches.
After when i am trying to submit active users and active responsibilities.
Those also getting completed
But when i am trying to click button view output or view log
I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
Can anybody tell me what is the issue. Waiting for your reply
Ganesh

I am getting error as "Client routine fdpvwr failed to prepare for file transfer"
The error is reported in one note only, and it seems it is not applied to your current setup. I would suggest you log a SR to confirm if you need to apply patch 4653217 or not.
Note: 466743.1 - After Upgrade Of Db To 10.2.0.2, Receive Error When Viewing Conc Req Log/Output
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=466743.1

Control/set a limit for file attachment

Hello,
I would like to know if there is a way to control/set a limit for file attachment in Workbench ES. e.g. Assign Task > Attachments & Notes.
Can you please advise.
Thanks,
Han Dao

No. You would have to customize Workspace to do that.
Jasmin

Plz hel for file transfer using zmodem protocol

someoe plz help me. i have to devlop an application that transfers files betwn 2 pcs(both ways) using dial up connection, further it should autodial the connection at periodic times.
i am trying to use Zmodem file transfer protocol. i succseed in sending string (for test)using my sender program with hyper terminal open on the other hand. it prints the string. but when i use my receive program, similar to given in samples(simpleread.java) it doesnt work.
actually when the ring comes from the sender how to send command to modem to hang up and connect to the calling pc if there are any such commands then plz help.
----sameer

someoe plz help me. i have to devlop an application
that transfers files betwn 2 pcs(both ways) using dial
up connection, further it should autodial the
connection at periodic times.
i am trying to use Zmodem file transfer protocol. i
succseed in sending string (for test)using my sender
program with hyper terminal open on the other hand. it
prints the string. but when i use my receive program,
similar to given in samples(simpleread.java) it doesnt
work.
actually when the ring comes from the sender how to
send command to modem to hang up and connect to the
calling pc if there are any such commands then plz
help.
----sameerU ddnt abrvt nuf. I r3r1t 4 U.
Sum1 plzz hep m3. i 1/2 2 dvlop app taht xfer fil betwn 2 pcs(bth wys)...

Alert Configuartion for File Transfer

Hello,
I need some pointers in setting up the alerts for the file transfer for the given two scenarios -
1. An alert is generated everytime the polling fails i.e. the file adapter does not find a file to be read
2. An alert is generated when the file is transferred. I am just doing the file transfer so I am not using the message interface.
One option for this is to generate the mail by using JMS adapter, but I would prefer alert creation.
Thanks.
Regards,
Mayank

Hi,
With Alert Framework you can apply the alert notifications wherever the file transfer in XI will failed.
Refer
XI : How to Re-Process failed XI Messages Automatically
XI : How to Re-Process failed XI Messages Automatically
XI: Alerts - Step by step
The specified item was not found.
For successfull messages there will not be the alert notification available. But as its mentioned by Amir, you can send mail confirmation with mail adapter, or can go for JMS adapter for sending the successful messages.
Thanks
swarup

8900 to imac bluetooth connection for file transfer

Hello, I have a brand new curve 8900 javelin and a new IMAC. Both devices can see each other and I can manage to get a green connection light however it only lasts a few seconds and then disconnects. Can someone please tell me how to overcome this problem?
thank you

That's really weird, the different ways that the providers cripple the same phone. I do not need any plug-in for BT iSync but I can't do file transfer with BT or with USB (I do have a microSD card installed). Unfortunately, I have no use for iSync. I can also use the phone to provide Internet access for my Mac but the Mac is a desktop and a hardwired connection makes more sense.
The USB connection is really frustrating. Profiler knows that the phone is present and the phone knows that the Mac is present (the battery does charge) but otherwise it's as if it's not even connected.
I am able to put the card into a card reader and transfer files that way. I don't mind all that much but it's not easy getting the card out of the phone.
By the way, there are several RAZR versions. Is your "V3XX" the same phone as my "V3m?"

Bluetooth - any hope for file transfer in near future???

Hi,
Presently iPhone 4 does not allow bluetooth file transfer to other mobile devices and even my PC.
I am not interested in illegal music/video transfer but genuinely transferring my data files between pc and other mobile devices and use it like a mobile storage device. I don't like the idea of mailing my file and then downloading it again when I have both devices in my hand! It's not helpful when other devices do not have internet connection or limited internet usage.
Please let me know if apple policies would allow it to make file transfer possible in near future (except music and video). Otherwise it would greatly reduce its usability for me.
*I hate its file storing and transferring features.*
*Another reason for hating iPhone is 'Flash'.*
Apart from this, its simply superb.
agmad

Hoekstes wrote:
Why is something so simple its available on 10 year old Nokia 3310 bricks not available on an iPhone. Its ridiculous.
Because there is nowhere to put the files on an iPhone. There is no common file storage area on an iPhone that all apps can access. Each app sits in a sandbox for security purposes. Each app can only access its own files. You would have to have an app running where the files would go, and then the files would only be available to that app.
The old Nokia has a common file area and does not have the security the iPhone does, but then 10 years ago you probably did not need the security.

TC - Painfully Slow for file transfer. How to solve it (PC + MAC) ?

I have a dell laptop and a mac book air, both connected to my TC. Transferring files is a joke. I am a novei mac user. How can this slowness issue be fixed for both the pc and mac? As I am writing this, i am currently doing a software update on my macbook air, getting 10.5.3 now. Does this solve it?

Similar problem here.
iMac using 802.11n to connect to time capsule. Time capsule configured to use 802.11n (b/g compat), and WPA/WPA2 security.
Typical transfer rate (file transfer from imac to tc) of about 2Mbps. After reboot of the TC, speed can sometimes hit 6Mbps.
I have played with the security settings. After a softboot with new config:
- no security, 802.11n mode: 12Mbps throughput
- WEP security, 802.11n mode: 8Mbps
- WPA/WPA2 security, 802.11n mode: 6Mbps
Enabling interference robustness seems to have little or no effect.
All of these speeds are significantly lower than what I'd expect.
No other devices were on the wireless network during the testing.
I've read that alot of others are having similar issues. I suspect that most of these devices are running extremely slowly, but most people aren't bothering to check throughput.
Would love to know if there is a real fix out there. 802.11n should be much much faster than this. If I could reconfigure the TC to use 802.11g, I would.

Slow Transfer Speeds For File Transfer Manager 5.0 Build 0032

I have a 20Mbit internet connection. When I download from the Microsoft download site I can get files downloading at reported speeds of up to 1.7 Mbytes per second.
When downloading from the TechNet Benefits section I have to use the Transfer Manager and I can only get speeds that vary between 30-80 Kbytes per second. Rarely any faster.
I am using XPPro & IE7 straight out onto the Internet via my router / firewall. No proxy server.
What can I do to speed the process up or bypass the File Download Manager?
Regards.

Thanks for your feedback Tekky. FYI there is also a forum specifically for TechNet Website Feedback which is the more appropriate place for TechNet Subscriptions questions at http://social.technet.microsoft.com/forums/en/tnfeedback/threads/
There are many suggestions in this post about improving your network speeds when downloading from MSDN and TechNet subscriptions sites. Here is one more place to look for tips, which we have linked to from our Downloads and Product Keys FAQ (MSDN version, TechNet version):
The website for the Microsoft File Transfer Manager, particularly their troubleshooting page which includes additional discussion on configuring the FTM and on slow transfer speeds.
As Julie stated above, you can call TechNet Customer support and they can take you through some additional troubleshooting and diagnostic steps to assist. Julie has linked to the support phone numbers in her reply.
Thanks,
Mike Kinsman

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
<b>import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;</b>
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

Ichat auto accept for file transfer? way to combine buddy lists?

1) on the new leopard ichat, is there an auto-accept mode for file transfers so that anyone on my buddy list can automatically send me files?
2) i have a google chat and aim accounts running. they run on separate buddy lists. is there a way to combine them to only have one buddy list window?

You can actually. Go to iChat > Preferences > Alerts, select "Incoming File Transfers" from the pull-down menu, check "Run AppleScript", select "Auto Accept.applescript". Your file transfers will be accepted by default

EJB Design Pattren For File Transfer Application

hi,
My requirement is Transfer of large files (around 300-500KB) across the network with a central repository.We looking at a Solution from J2EE With EJBs.
At the Central Repository we are looking for ejb-Application Server. But the the issues i come acorss for my requirement are
1.I need to store and access Files on the local hard Disk with ejbs
>> But ejb spec won't allow to access the local file System
2.Based on the certain rukes i need to forward the files to different location
>> But ejb Won't allow to use Sockets in EJB.
I Want to know is there any work around in EJB to meet my requirements.
Any suggestions and ideas are welcome.
Regards
Srinivas

Thanks For Your Feedback. I Will Explain my Requirement more elobarate.
Our System Arch Looks like this
The Current System
|--MiniServ1--Client
Source---Central Server--|--MiniServ2 --Clients
| |--MiniServ3--Clients
Data Base
------ Bidirectional Link
Central Server --With database about all the transcations through the System
Mini Serv*--with Storage info of teh files came to that Server
Where Source / End Elients are Windows Based Clients(Developed in VC++)
The File Size Transfering across different Sources is of Size around 0.5 MB.At the Central Server these Files Will be Stored on the local hard Disk.At Centarl Server based on Some Rules it will be routed through different Mini Servers(Mini Serv*).Mini Server Will Send the file to different Clients. After Working on the files the files will be send back to the central Server via the Mini Server*.At the Central Server we have the latest Copy of the File
Currently Entire System Based on Windows and Central Server Built using COM Components Running on Windows 2000 Advanced Server.
The Problem
We Want to port the existing Sytem in java with out touching the Source and End Clients.We thought of replacing the Central Server with J2EE Application Serevr and COM Components with EJBS.But in Ejb we can't write to Local System and can't use sockets to send the files to MiniServers.
Is there Any Work Around for the mentioned problem using java?

WRT610N 2GB limit for file transfer

Similar Messages

Maybe you are looking for