Wrt610n after upd to 2.00.01 tab "Access Restrictions" was gone

Hello. I decided to update firmware on wrt610n from 2.00.00 B05 to 2.00.01. After it - tab "Access Restrictions" was gone. Can I use this function on this version? If not where I could download firmware by 2.00.00 B05 version?
Solved!
Go to Solution.

Seems weird. I’ve checked on the release notes and FW version 2.0.01 B015 included a fixed on access restrictions. Have you tried powering off and on the router after the update? If power cycle won’t work, you would need to press and hold the reset button for 30 seconds and totally reconfigure the router’s settings. All tabs should be present after reset since it would restore all settings back to factory defaults.

Similar Messages

After installing iOS 6.0, YouTube was gone, and can't fine it at app store. The installation of new updates is never succecessful. And there seems to be no way that you can stop it. Why is that?

After installing iOS 6.0, the previously installed YouTube was gone, and couldn't find it at app store. Also, the installation of new updates Can not be completed, they have been in "installing" status for days. And there seems to be no way that I can cancel it. What should I do?

Thanks, I understand that. Now the biggest problem is that I can not purchase or install anything from App Store. They have been in "waiting" mode ever since I tried to install them. What might be the reason?

After updating Firefox Browser a week ago a "Note Taking" program I had installed with a launch in the Tools tab disappeared ... 6 tabs of notes are gone now?

I had a nifty note taking program with a launch line in the Tools Tab of the browser ... I offered six separate pages to take notes ... I cannot remember the name of the program and when I updated the Mozilla Firefox Browser to the latest version about a week ago the line to launch that Note program in the Tools Tab was gone ... I cannot find my notes on those six pages and they were voluminous ... any ideas where the program went?

You are using Firefox 23.0, which is an unstable version of Firefox not yet ready for release (the latest stable version of Firefox is Firefox 22.0)
Quite possibly, the application you were using is not compatible with such a high version of Firefox.
You might want to take a look here (http://mzl.la/MOvsag) to see if downgrading Firefox can be a solution for you. If you were last using Firefox 22.0, you can go over to the Mozilla website (http://www.mozilla.org/en-US/firefox/new/) and get Firefox from there.
Also, please check out Session restore for more information (http://mzl.la/MCnd4M)

HT1151 Cannot retrieve file after I forgot to properly eject the USB it was on--what can I do to get this file to open?

Cannot retrieve file after I forgot to properly eject the USB it was on--what can I do to get this file to open? Thanks for helping me out b/c it would take days to re-create this file! IMAC 10.5.8 Excel File using .xls extension.

Hi Sue,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Try a Repair on the External USB Drive.
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

The settings on the tab for "delegate" was not properly stored.

Hello group,
I try to write it in english - but it is a try only *g
Since last week I can´t set or delete any user or groups from the delegate tab.
Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
I´ve try to move the users to the IT OU but the problem is the same.
New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it.
Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
I´ve translate the error message with google language tools.
The settings on the tab for "delegate" was not
properly stored. List to send in the order can or can not activated will.
You do not have the required permissions to perform this operation with this object.
Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
Thx for any help!!
Kind Regards
Denis Ecklerhttp://www.ewig-drohendes-versagen.de
ICE 2009 I´ll be there -> http://www.ice-lingen.de/

Hi Denis,
At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
DSACLS “distinguished name of the user object” >acls.txt
Thanks,
Mike

Tab labels are grayed out except for active tab. This was not always the case. How to fix this?

I recently had the 29 upgrade forced on me. I did not like the new lay out. I was trying different things and I hit the restore defaults button. After I did this, any tabs that I had open that were not the active tab, the labels was grayed out. I want the labels to stay the same. How do I get this fixed?

Why do I have to install an extension to get back to the style I want to use? This is ridiculous.

HT1430 my daughter's ipod has been disabled after too many wrong password attempts. The ipod was not synced to a computer. How can we get it started?

My daughter's ipod touch has been disabled after too many wrong password attempts.
The ipod was never synced to the computer so can't connect to itunes.
How else can we enable the ipod touch again?

Restore, if iTunes will let you. Everything except the password will be restored. Connect via cable to the computer that you use for sync. In your case, choose any computer with iTunes software. Be forewarned that it takes a long time. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

WRT310N Access Restriction tab

I just recently updated the firmware in my router from 1.0.04 to the newest 1.0.07 build 14. I felt the need to update since my router would randomly stop broadcasting a wireless signal and after a few minutes come back. but that's not the issue, since the new firmware doesn't do this(yet, *crosses fingers*).
Since the update, I've noticed one thing. The "access restriction" feature on the router isn't there anymore. Live support says they've never seen that happen before, and directed me to the HDN stuff on the LELA software(After telling me to do the standard stuff for 5 minutes). I see the feature kind of available in there in a more "user-friendly" way. I don't understand how the feature could be missing on the main GUI but available through some software. I, personally cannot warrant paying for the HDN stuff just for the access restriction tab controls that were previously free and continue to be free on other routers, and most other people probably don't as well. But I'm interested in seeing if others have noticed this as well and what the general community thought is about this.
Solved!
Go to Solution.

When you reset your router to factory defaults it goes back to the old firmware 1.0.04...With the old firmware if you don't have any issues then try to upgrade your router to the latest firmware...Wait another next firmware release...
However, if you have any issues with the old firmware then you should try to upgrade your router with the TFTP Utility...
Download TFTP Utility
Download Firmware 3.23 MB...
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...See if this works...

About Tab access keys

I came to know that, Tab access keys will be supported by the
future releases after version 6.0.6.2. Can somebody confirm me
when that release is going to be, which will support Tab access
keys.
null

I came to know that, Tab access keys will be supported by the
future releases after version 6.0.6.2. Can somebody confirm me
when that release is going to be, which will support Tab access
keys.
null

How to set 'colliding' access restrictions in wrt610n - what are rule preferences?

Hello. I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference.
When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set time but it appears it is not so.
Does anyone know the rule of rules? What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?
Solved!
Go to Solution.

Agh! Thanks for your reply, it was good incentive to test the problem little more. Now I'm pretty sure that wrt610n algorithm has problem - it lies with power cuts. In my flat, the last internet user usually turns off power board when goes to sleep. After power is resumed router seemed to work flawlessly yet herein lies the problem and I hope I've found solution.
The tests I have done:
1. 2 rules (as mentioned in my first post). Kid's machine works (this is day now). Didn't played with rules times. Just turned router off. When router was turned on, two other (parents) machine get internet access while kid's machine didn't! Kid's machine was banned from internet against the rules. Router has proper time set - I checked it's status.
2. I turned both rules to "disable access" versions (1. disable access Su-Th 21-23:55; 2. disable access Fr-Sa 22:30-23:55). This rules should work almost the same way (the only problem is, that no rule can expand over midnight, so the third rule should be added, banning access from midnigts to early mornings). The router was switched off. Then on. All three machines now has internet access. I hope, router will ban access in the afternoon automatically, as is set
My deduction. Algorithm bases on time points. When marked time comes, algorithm do, what it should do (but only, if router is powered). When you set "turn internet access on" time (this is "allow rule"), router turns on the access precisely at the chosen moment of time. If router was dead at that time, it doesn't turn the access on however, when power is restored. But when you set "disable rules" in place of "enable rules" I hope it should work and I tested, that this way router gives access after turning it on. Router should disable internet access to the kid's machine at selected time - at least until smart kid does not turn the router off a few seconds before the switch_off time and soon after turn it on But then there is plenty of more powerfull means of control, so I don't worry too much Yet it seems to me, there is a flaw in algorithm, which doesn't run properly after power on.

My Macbook was hacked by somebody right after activating downloaded VLC player. I couldn't control my machine. Every thing was messed up! Finally after reboot I realized that even my administration password was changed. Stupid hint I was able to reed: Wha

My Macbook was hacked by somebody right after activating downloaded VLC player.
I couldn’t control my machine. Every thing was messed up! Finally after reboot I realized that even my administration password was changed. Stupid hint I was able to reed: What located in box above low case ? I used my friends computer and founded hot to fix my problem using Unix commands to reboot in a single user mode. I founded a lot of different solutions which had prity the same beginnings but very complicated continuation, which, I understood will force me to cach during restoration anuther crap – time bomb in my mac! Finaly I did restor. somehow. But still feel somebodyies presents. Safary messed up – I will send you a log Itunes – messed up. Speaker in a top menu – grayed, and I can’t control my volume. But the most triky thing – bouth my Apple keybords – internal and mostly bluetouth external also working and typing wired! I am sorry for my spelling, because I cant check spell for Mac’s Word (in Microsoft it was F7) I have also several attacks from my neighbors by community I know their names, because they are somethere very close to me – I can see them throuth FI-FI connection. They often kick-me out from my place and started to use my resaurces. And also Mackeeper make me a hard time!
In Microsoft times u just reinstalled computer – clean installetion from corporate licensed disk. But now I am a beginner in MAC – I love it! But a lot of new and triky – at this way
Fore example – my goal – to do fool Macbook backup at external USB drive using boot srartup option and make my life yaser in case of crash. But now, I don’t know if I can trust recommended program Carbon copy cloner – Ms. Bombich?
I am very sorry for my spelling, because I feel somebodies presents, who playin with me.
Final question Do I need some antivirus Mac compatable which is update paches, service packs? How to map defolt documents folder not to a local, but to external USB?
Esquse me for a lot of questions, but I am beginner in MAC, and I LOVE it!
PS. Good news. Looks like Safari came back! Somebody, probably allredy helping!
But my interface qute different from original – so something still wrong!

Didn't really read much at all of your post. Much, much too long, irrelevant details and & no paragraphs.
Can't use time machine due to corruptness
Post over here -> Mac OS X v10.6 - Snow Leopard forum
About my macbook and apple ID how can I upgrade my Macbook from 10.6.3 to 10.6.8 with out all the permissions being changed and corrupt??
Same as above. Post in the correct forum.
Need to gain access to my apple Id that would be a great start
-> http://support.apple.com/kb/HT5625

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

Did it work with previous ii.x version?
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
Did you do everything here:
iOS: Device not recognized in iTunes for Windows
Including
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer?

I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series

Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.

I downloaded pics to my pc and after all my music was gone on my iPhone. I have tried repeatedly to sync with my iTunes but it does nothing. The last time said it didn't have a disc to sync to my iPhone. Ver confused as to why it's doing this. Any thought

I downloaded pics to my pc and after all my music was gone from my phone . I have repeatedly tried to sync to my iTunes but it tells me it cannot be synced to my iPhone. What's going on? Any suggestions?

Yeah everything is gone for good. The apps won't be a problem. You can just redownload them. For the music find a program that copies the music from the iphone to the computer. Then add the files to itunes ans sync.

I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

I am trying to access a webpage but it keeps saying I need a client certificate. Even after I click 'continue', I still cannot access the webpage.

https://etivity.sul.com.au/
It's to access my work rosters.

Wrt610n after upd to 2.00.01 tab "Access Restrictions" was gone

Similar Messages

Maybe you are looking for