WRT610N - Both laptops lose connection to access point intermittently

I've tried searching the forums a little but don't see my exact issue.
I have a WRT610N and two laptops (one Windows7 connected over N 5ghz and the other XP connecting over A 5ghz). From time to time, but at least twice a day, especially when doing a heavy download or streaming media, the laptop connection to the access point will be dropped. I have to disconnect from the wireless network and reconnect.
I verified that I was running the latest firmware. I never had to upgrade, was shipped with 2.00.00.05. THe 5ghz network uses WPA2 security and I tried switching from AES only to TKIP and AES. I also tried changing the key renewal interval. One laptop has a DHCP reservation and the other is allowed to get whatever IP. 20 or 40 Mhtz channel width is set to auto.
If anyone has any ideas of things to try before I go return the thing I would appreciate it.
Message Edited by jonredraider on 12-03-2009 11:42 PM

Open the setup page and Under Wireless tab..Click on Advanced Wireless Settings...Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2307 >>Click on "Save Settings"...

Similar Messages

T60 - WLAN regularly loses connection to access point

Hi,
my T60, Windows Vista with
ThinkPad 802.11a/b/g/n, 802.11b/g/n Wireless LAN Mini PCI Express Adapter
WLAN driver version 05 Nov 2007, v7.3.1.127
WPA authentification
regularly (i.e. once every 15 min) loses the connection to the access point for some seconds.
I already tried different access points, different encryption, different WLAN channels, but nothing helped.
So the cause seems to be the WLAN adapter of my T60 or the driver.
I am using the latest driver. As far as I remember, I did not experience this issue on Windows XP.
Does anyone have an idea how to solve this problem? It's quite annoying.
Thanks! Best regards,
Daniel

Hi lwoxen,We apologize about the inconveniences, but I would be glad to assist. One thing worth trying is changing the wireless channel on the Cisco WAP.To do this, just login to your U-verse gateway by going to http://192.168.1.254. From there you should see a list of all the devices connected, and you just want to choose the details on the Cisco AP. It should give you an IP Address. From there, type that IP address into your browser. It should ask you for a user name and password:User: ATTadminPass: 401!VENFrom there go to the wireless options and change the Control Channel option to one of the 4 channels. I would suggest trying 36.Let us know if that works. Also, I will be sending you a private message, so if you do have any further problems, you have a direct point of contact.

Connection via access point to my pc via Bluetooth

Pls, kindly guide me on how to connect my laptop to the network access point on the new c2-00 nokia via bluetooth. I have been trying, but couldnt get through. My pc did not see any network device, with the bluetooth on. Is that not because it is dual sim? Pls, guide me. Anticipating positive response.

Hub_apprentice wrote:
Thank you John46. You have clarified the settings that I need to plug in to the access point. Just to confirm re the channel I need to set the channel on the access point to be different from the BT Hub.
Your assistance is much appreciated
I think you meant me.
Make sure that the home hub is set to a fixed wireless channel, not smart wireless. Try 1,6 or 11.
See http://bt.custhelp.com/app/answers/detail/a_id/14094/kw/change%20wireless%20channel/c/346,407,410
Set the additional access point to one of the other two frequencies. So if the hub is on 6, put the access point on 1 or 11.
This gives plenty of separation without any overlap.
If you read my document, you will see that I recommend setting the IP of the access point to 192.168.1.15, to avoid the DHCP range of the home hub.
Keith
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Connected to access point but internet cannot be found????

router was working fine until it wasnt finding internet one nite and then it was unplugged so internet could be used on main computer and now when i try to plug everything back up to get wireless internet, it still says connected to access point but internet not found dont have a clue what is going on!?!

I think you were connecting to wireless router to access Internet, you need to have proper configuration on wireless router and wireless adapter to make it work, take a look on this wireless network setup tutorial to help you.

No AirPlay when connected through access point

I have my wireless setup with a main router in one room and another router (a DIR615) in another room setup as an access point.
I have an Apple TV 2. gen which is hooked up by ethernet.
Everytime Im connected wirelessly through the main router, AirPlay works fine, by when Im connected through the DIR615 (the access point), theres no AirPlay.
When Im on the access point everything else seem to work fine - only thing thats missing is AirPlay. Oh and Remote has the same issue.
The DIR615 has an option called "Use as access point" which I turned on. Then I set it to broadcast the same SSID as the main router with the same password. Is that wrong set up?
I can access my other device like my NAS with no problems through both the main router and the access point.

I have noticed a similar issue.
Years ago, I extended my original wired network with an Airport Express (AE) acting as a bridged access point. When I got my iPod Touch, I noticed that the AE would go out to lunch occasionally if the WiFi on the Touch was on. But when the AE was functioning correctly, I could do AirPlay from the Touch to the AE.
With the addition of an iPhone and another Touch in the house, the AE was becoming more flaky, so I bought an access point product from Trendnet. This device bridges another wireless network to the same IP subnet (192.168.1.0/24) as the wired and AE wireless network, but it is a different wireless network (SSID) from the AE wireless. This allows me to configure the handheld devices to only connect to the Trendnet. Now the AE no longer crashes. (Pretty ironic that I need to buy a non-Apple device to get it to work...).
However, I do not get the AirPlay icon when a handheld is connected to the Trendnet network. I just tried connecting one of the Touches to the AE wireless and when I do, voila, I do get the AirPlay icon.
Theoretically, the path taken to the AE from the handheld shouldn't matter, but it looks like Apple engineered it so that it does. Maybe AirPlay doesn't run over IP?? It is disappointing and I hope it gets fixed.

WRT54G as Access Point & Intermittent Connectivity

So I followed the advice found here
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=26177
Hooking up a wired router to my WRT54G Router, which I am trying to use as an access point. I've set my LAN IP to 192.168.1.2, disabled DHCP, cables plugged into LAN ports, not the WAN port.I also changed it to Router Mode instead of gateway mode.
The problem is my wired router is my landlord's, and I don't have access to it. Anyway, I can usually connect, but sometimes it disconnects repeatedly, and it seems like i can't keep a connection for more than 5 minutes.
The problem doesn't seem to nearly as bad when I'm plugged directly into the wall (but there have been a couple times when I've gotten disconnected).
My theory is that I may be getting something mixed up with regards to my assigned IP address. When I'm plugged in i'm 192.168.1.108, but when I connect to the wireless, i'm almost always 192.168.1.100, even though there's only one DHCP server on the network. (this is just a guess, though)
Any advice you can give would be greatly appreciated. THANKS!

I've updated the router's firmware I forgot to mention that in the original post. Are you sure regarding the "gateway mode", the little help blurb on the routers settings says that gateway should only be used when the router is the part of the network that deals directly with the wider internet. I am pretty sure I've tried it in both modes and was having this problem, because it was definately Gateway

LinkSys Wireless Card connects to "Access Point" but no internet connection

I have 2 LinkSys wireless cards. one is 802.11g, the other b. The signal for the Airport Extreme 802.11n Wi-Fi Wireless Base Station is very strong, but when I try to connect, it says "You are connected to the access point, but the Internet cannot be found". No internet access, and I can't ping anything (Ping request could not find host...). And of course the printer hooked to the AirPort is also not recognized. My iMac and Macbook both have no problems connecting to the network. There is no problem with ethernet connection to the Airport. Is it possible to have a compatibility problem between the Linksys and Airport hardware? I thought as long as they were were compatible 802.11, they would work together. The cards had no problem with my old DLink router or other hotspots in the city. Is there a set-up I missed for setting up the PC-based cards with the AirPort?

Is your wireless network secured?
The box said windows xp or better... So I installed Linux!

Netctl connects to access points I've never seen before

On my laptop using netcl and auto switching profiles as described in https://wiki.archlinux.org/index.php/Netctl.
Recently, and more than once, I'm connected at a public cafe and I'm suddenly no longer able to reach the internet.
When I investigate, I find that I'm no longer connected to the cafe's wifi, but I am connected to some other essid that I've never seen before. This is disconcerting for possible security reasons but also annoying to get disconnected in the middle of whatever I'm doing.
The essids that my box connects to I've never seen before. (I'm assuming the come from nearby computers.) There is no corresponding profile in /etc/netctl.
To work around the problem, I run
sudo systemctl stop [email protected]; sudo wifi-menu
then reconnect to the access point I was originally connected to.
I really don't want netctl-auto to change a connection that is working. How can I prevent this from ever happening?

That file has a long list of every wireless router I've connected to! I didn't know that was there. It duplicates a lot of information thats in /etc/netctl/... It has passwords, too. I'm not going to post it here.
But I don't see the mysterious routers in that file. The ones I find myself connected to, that I never connected to myself.
... Looking over that file again, I see a strange entry:
network={
key_mgmt=NONE
ssid=""
id_str="wlp3s0-none"
I'm going to delete that. I believe it comes from a time I connected to an essid without a name. But I'm not sure if that's the culprit.
Last edited by Dave Cohen (2014-02-14 17:03:32)

No connection to access point

I have installed the range expander (v.2) using the automatic method and get the proper blue lights. My distant PC indicated a very strong signal witth the correct SSID but says "cannot contact with the access point".
I have set my router to include the 192.168.1.240 address in its range. It shows two wireless connections, the first one being my laptop at 192.168.1.21 but only assigns this one IP which is for the laptop, the range expander is recognized as a secind wireless unit but does not have an IP indicated by the router. As all else is normal I suspect this is the missing link. How do I get it to assign an IP?

You can do one thing connect back the Laptop to the Range Extender .. open setup page ..of range extender ... use static Ip 192.168.1.240 ..subnet 255.255.255.0 ..with gateway 192.168.1.1(Router Ip address)...click save settings ... Power cycle the network ... try to ping the Ip of the range extender from wired computer to the router ... if getting replies ....keep the range extender in such a place where you are getting low signal strength from the router itself .... so that the range extender will get connection from router. .. keep the laptop on the range of WRE54G .... so that it will only take connection from RE ...not directly from Router ... Also check the Ip address on the Laptop .... See if it works...

Connect Netgear access point to Home Hub?

Before I switched to using a Home Hub 2, I was using a Netgear router/modem (DG834G).
And I also had a Netgear WPN802 access point connected to the DG834G router/modem (via ethernet cable), and this enabled me to connect to internet using wifi from another location in my house. Just seemed to work.
But I can't seem to get this to work with the Home Hub. When the access point is plugged in to the Home Hub, it doesn't seem to show up in the Devices part of the Home Hub, and I can't connect to the access point via its default IP address (192.168.0.231). I can't see anything in the Home Hub to configure to make this work. On the access point, the ethernet light is lit, which suggests that it can "see" something on the other end of the cable (and the light goes out when I unplug the other end from the Home Hub).
Any hints?
Thanks.

You will need to change the default IP address of the Netgear WPN802 so that it is in the same subnet as the home hub.
The full details on how to do this are here http://kbserver.netgear.com/pdf/wpn_802_ref_manual.pdf
Look at page 23 and change the IP address in the Basic settings.
You could change it to 192.168.1.231 if you wish. It would still not show on the home hub because it is manually assigned. But it should work fine.
I have an additional Belkin wireless access point on my hub, which uses the address 192.168.1.200, and that works fine.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Can't connect to Access Point that is connected to the Internet (Snow Leopard 10.6.8)

Hi all,
I am normally not someone who posts on support forums since most of the problems can be solved be searching through piles of other questions, but this things has really got me pulling out my hair and I hope that maybe someone can help me with this super weird problem.
So, a few weeks back, my Mac Mini (kind of old, guessing 2007) stopped connecting to Wireless networks. Since all other devices in home (iPhone, MacBook Pro and a PC) are connecting just fine I thought it had to do with my settings. All it says is: "connection timeout".
The Mac Mini connects just fine when I plug in an ethernet cable, but that's a no go since I don't want cables laying around our living room that much.
I tried a lot of things suggested my other people like removing settings, PRAM reset, moving the AP closer, router settings etc etc. Of no avail. Even tried to fix it by reinstalling Snow Leopard, but that didn't do it either.
Though when I turned my MBP into an Access Point it could connect to that network just fine. That made me wonder if it's my router, but once I plug in an ethernet cable into my MBP to share Internet access it won't connect! Tried the same with my router and indeed, it connects just fine once it has no Internet connection.
Tried searching for people that had the same problem, but I couldn't find them. Can anybody here help?
TLDR; Mac won't connect to Wireless network that has an internet connection, but does when it hasn't.
Thanks!

Try disconnecting the router from the internet (WAN port) and plugging a PC directly into one of the LAN ports. After resetting, ignore the smartwifi login, click the two checkboxes, and login manually/directly with the "admin" password and reconfigure.
If you don't want to do all that just yet, try accessing the router from the public IP address assigned by your ISP. That might work

Connecting European Access Point to US Controller

I have a 5508 controller and about 30 AIR-CAP3502I-A-K9 access points across 30 offices in the USA. We have a new UK office and purchased an AP locally to avoid shipping from the US, the UK AP is an AIR-CAP3502I-E-K9. When I try to add the UK country code to the controller it tells me I have to disable 802.11A and B wireless networks. I obviously don't want to do that. Is there a way to connect a -E AP to an American controller??
Thank you,
John

Is there a way to connect a -E AP to an American controller??
No there is none. You have two options:
Get another controller where you allow APs with the same Regulatory Domain to join; or
Convert and operate the APs in autonomous.
The reason behind this madness is because the wifi Regulatory Domain for Europe and US are totally different. In order to comply, Cisco's WLC will only allow COMMON factors to be enabled.
Take my case for example. I have a few "-A" APs that were delivered incorrectly when I should be using "-N". So this means that all my "-A" APs have 802.11a radios disabled.

Connected to access point; internet cannot be found. . . .

Im about to take $250 worth of linksys products back to the store if i cant get this fixed.
I have this message on my link information screen.
"You are connected to the access point, but the internet cannot be found"
Ive called the help line but Im having a hard time trying to understand the people in India. Ive called three times and they tell me to do the same thing and it still does nothing. . . . HELP!!!
Message Edited by primus on 09-18-2006 08:24 PM
Message Edited by primus on 09-18-2006 08:28 PM

try to shut down the security setings that works for me

L3 connections between Access points and WLC

hi,
we have a customer asking us to configure wireless system as per attached drawing.
WLC is in Data Center which is connected to Data Center Switch ( Cisco 3850), then this DC-Switch is connected to DC-Core ( Cisco Nexus-7K).
this Nexus-7K is connected to many campus Networks. in all campuses there is Cisco 4507 Campus Core which is connected to Nexus-7K.
then from Campus core many distribution switches are connected.
all Vlans for data and wifi is created in Distribution Switches. Distribution Switches are VTP Servers and many access switches with connected APs are connected back to this Distribution Switch.
All Access Points are registered at WLC in Data Center, but wifi clients are not getting ip address from DHCP Server, as well as even if we configured static ip address at wifi clients they are not able to communicate correctly.
please correct me if there is a mistake in this design , or we have a solution to solve this problem please let me know.
attached topology diagram
thanks,
anvar

Hey Anvar,
Too much details about network, to make it simple:
1- APs and WLC can be in separate VLANs (Not a problem)
2- As APs have joined, these two VLANs look fine for me
If your clients can't communicate probably with static IP address
1- From the WLC, ping default gateway for that VLAN
2- If the WLC can reach the gateway, its wired VLAN issue that you need to investigate in the path (maybe using wired device in the same VLAN as the clients in the switch where the APs are connected)
Now, about why the clients are not taking IP:
1- What is your DHCP, where its located? Is it the same one for all clients?
2- Do you have local APs or FlexConnect ?
3- When you run the debugs for DHCP where the process breaks?
Cheers,
Nour

Cisco Network Assistant(CNA) not connecting to access points.

When I create a community with CNA, it finds the 2960 switch and connects to it. However it shows "connection failed" for all the 702i access points. Not sure why it shows connection failed. Any help would be appreciated.
Also, if I try to connect directly to the access point thru CNA, it says not accessible.
Thanks.
Jim

It will be helpful for other community members to know the solution and cause, if can be shared.
-Thanks
Vinod

WRT610N - Both laptops lose connection to access point intermittently

Similar Messages

Maybe you are looking for