WRT610N certain file types have wrong time stamp

Hi, I have searched this forum for a similar problem with no luck - so here goes...
I have a WRT610N router using the latest firmware 1.00.03 B15. After upgrading the firmware I reset router for 30 sec., and then powerdown for 30 sec. as I have read on this forum, and yes the USB drive was disconnected before hand, but I still have this problem when creating/saving certain file types on the USB drive attached to the router.
I have discovered that MS Word and PowerPoint files (.doc & .ppt) are saved with the correct date and time, but MS Excel, Notepad, and HTML files (.xls, .txt, and .mht) are saved with a time stamp that is one hour later!!! There may be other file types that are affected by this as well.
Example: I create/save a Word file and also an Excel file at 1:00 PM, When I use Windows Explorer to view the details of the files on the USB drive, the Word file has a timestamp of 1:00 PM, but the Excel file has a timestamp of 2:00 PM (in the future). All other functions on the router seem to be OK.
If I create these five file types on the C: drive they all have the same timestamps, I also have a Netgear SC101 NAS which shows the correct timestamps. I only have this problem when using the USB drive connected to the WRT610N. I tried this on 3 different computers - all have the same issue.
This may seem like a minor issue, but Im using SmartSync Pro to back up all the drives on the LAN and it uses the file's timestamp to determine if it should be backedup or not. So Im concerned that backups may not be done properly, or God knows what it will do with files from the future!
Im using WinXP SP3, the USB drive is a WD2500BEVS - 250GB with 4 partitions (largest is 120GB) all formatted as NTFS.
I would appreciate it if others would try this and post their results here so I would know whether to bug Linksys for a fix, or if I have problems elsewhere in my configuration. Thank you.

Well, 15 days, 40 views, 0 replies.
Could one kind sole, just one, please; startup Notepad, save an empty .txt file to the USB drive on the router, and then let me know if the file had the correct time stamp?
Preferably someone with a ver 1 router, firmware 1.00.03 B15, and running WinXP SP3.
Thanks in advance.

Similar Messages

Premiere Pro CS5 crashing when exporting (only certain file types)

Hi
I have found that when I try and export media in Premiere Pro CS5, it often crashes during the export. It says
It's only certain file types. For instance, Vimeo HD seems okay but Vimeo SD always crashes mid-export. MPEG is okay too, but MPEG2-DVD always crashes.
Sometimes it says this: "Error Compiling Movie - Unknown Error" but doesn't throw me out of Premiere altogether.
Other times it crashes altogether and Windows gives me this error message: "Display driver NVIDIA Windows Kernel Mode Driver, Version 258.96 stopped responding and has successfully recovered". Premiere Pro then stops responding so I have to re-open it and start exporting again.
I have checked there are no gaps in my timeline and I have rendered the whole work area. Besides, I doubt it's anything that I'm doing wrong with the project itself because it's exporting fine in some formats.
I am also experiencing random crashes when editing too. Not that often, but occasionally it throws me out - and twice it has made the whole screen go crazy, with weird dotting across the screen (it's scary, it looks like the monitor itself has broken!).
Any help would be appreciated!
Nick
PS I have a pretty decent new PC - Dell Studio XPS, 8GB, 2x1TB drives, etc. Premiere itself is working great, except for these crashes.

Some drivers do not work well in some systems... so go to nVidia and try a different (usually newer) driver for your card
These notes are for Encore, but they MAY also work in Premiere
Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Uploaded file will have wrong char set

Hi there i am running apex 4.1 with glassfish on a Oracle 11.2 Database.
my database has the following NLS settings:
NAME VALUE$
NLS_LANGUAGE ENGLISH
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE ENGLISH
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 11.2.0.2.0
when i upload a file with the file browser system will create a clob, when i then try to read from the blob, or convert to a clob, my system is telling me that the Ü is an unkown char.
when i then looking to the debugger i seet the following:
0.01500
0.01600
NLS: CSV charset=WE8MSWIN1252
can this be my problem???
i checked the server an in the registery also the nls_lang us set to al32UTF8, also i used a test progrtam to check my DAD settings:
database-username= ANONYMOUS
default-page= apex
document-table-name= wwv_flow_file_objects$
document-path= docs
document-procedure= wwv_flow_file_mgr.process_download
nls-language= american_america.al32utf8
request-validation-function= wwv_flow_epg_include_modules.authorize
when i try to type the data in by hand it will work fine,
so what is wrong?

Well, 15 days, 40 views, 0 replies.
Could one kind sole, just one, please; startup Notepad, save an empty .txt file to the USB drive on the router, and then let me know if the file had the correct time stamp?
Preferably someone with a ver 1 router, firmware 1.00.03 B15, and running WinXP SP3.
Thanks in advance.

Cannot Share Certain File Types...

I recently uploaded a MP4 file that I wanted to share with a friend. The video is mine from my camera with basic editing in Premier. I uploaded this and then I see “You cannot share this file type.”
After a looking through the other forums I came across this thread that says we cannot share video, music, and fonts. Hmmm....
There is this sentence on the Creative Cloud Website:
“When you're connected, you can do even more with Creative Cloud, thanks to online services for file sharing, collaborating, and publishing websites and documents.”
Let us imagine:
I am a Video Professional who uses Premier to edit videos and the above blurb excites me. I sign up and make3 the most awesome video of my career. ( dream frequently) I do a bit of editing, viola! A finished project Time to share with my friend so they can confirm I'm a genius, okay? Since I have a website with Business Catalyst using the Creative Cloud I will put it there. Oh wait, BC cannot handle a file over 100mb and my Video is a few hundred megabytes. Well, I have Creative Cloud Storage online and it allows for sharing, wonderful! I upload the video, no issue, then go to share the video. WAIT! What is this? I cannot share a file that I CREATED? Why Not?
I can understand not wanting to get in trouble due to copyright law but you are a company that produces a program specifically for video editing (let us not forget Audition for Music/Audio editing.) I believed the pitch about Creative Cloud for professionals so they can create files and collaborate with anyone from anywhere. Yet there is that footnote: you cannot share video, music, or fonts. ?!?!?!? This is very limiting. If there are legal reasons why you cannot share the file types then say so. With MP4 there is a patent on the codec, and so we cannot share these files(?) but we can create them using Adobe Programs.
No worries I'll just zip my files to have my genius confirmed or denied.
Adobe, I would like to understand the reason for the block on allowing certain file types to be shared. With the disallowing of certain file types you severally limit the value of the Cloud. Also where is the list of blocked file types? Why did I have to find out the hard way that I cannot share videos? I cannot find a list or even a statement that those files are not allowed to be shared (other than a forum thread which is not the typical place those shopping for the service offered, would look).
Thank You, I think I need a chocolate bar now.

Agreed Lynda.
There seems to be certain promises, which may give false impressions, in Adobe's marketing copy for the Cloud. Limitations of the Cloud are barely, if at all, mentioned,
I hope it's made a little more accurate one day.

Can I exclude certain file types in the Photo Downloader?

Hi there!
I am very new here, so please do correct me on etiquette and if I'm doing something wrong. I've been searching the web for quite a while now but couldn't find an answer or even questions concerning this problem...
I like using Bridge's Photo Downloader, for the nice renaming and other options it gives me. Usually I want to download all images from a card and then delete them on the card. The problem I am having is that Photo Downloader will not only see images (like .JPG, .CR2 or .ARW) but camera database files and settings (.INT, .BDM, .BIN, ...). This is annoying, since I neither want them stored on my hard drive nor deleted on my card. I also would like to import movies in a different way. The way I can work around this now is that I manually deselect all non-images in the Advanced Dialog and then only download these. But I was hoping that there is a more elegant and automatic way to just exclude certain file types from automatic selection. Or even just a way to mark or unmark the images by file type. This should be very easy to implement and I am really curious if I am missing something obvious here or if this is just not possible yet.
Has anyone else thought this before? Or are you all using different methods to import images from your card reader?
Any help or comment is appreciated.

Sorry, download history is either on or off. There is no preference setting to exclude specific file types.

Save the file and give date & time stamp

1. Reading the Excel file from the selection screen as a parameter.
2. Using F.M. ALSM_EXCEL_TO_INTERNAL_TABLE reading Excel file into
    Internal table.
3. Implementing the Business Logic.
4. Move output to Final Internal table.
5. Final internal table should generate a Flat file. By using GUI_DOWNLOAD.
6. That flat file should be saved with the name and location given in the Excel.
7. When ever I run the program output file will generate in the same location but with date and time stamp. Because Im running the program for range of employees say initially I run for 1 10,000 employees next 10,001- 20,000 like that.
Whenever I run for 2nd time it will overwrite the previous output, thats the reason Im using date and time stamp.
Eg:
PERSONAL Numbers              Name                                         Location
00000001                 xxxxx-24.04.2007-10.30          C:\
00000002                 xxxxx-24.04.2007-10.35
00000003                 xxxxx-25.04.2007-10.40
00000004                                  xxxxx-25.04.2007-10.30
Can any one help me how to save the file and give date & time stamp through hardcode?
please help me in this issue.

I am not clear with your problem. Based on the understanding of your question,
there can be two cases.
1- U want to insert time stamp in the output file.
2- Time stamp is already there, u just have to solve the overwriting issue.
If your question goes with option 2, You can make use of import parameters
<b>CONFIRM_OVERWRITE</b> : Which will ask for confirmation before overwriting.
<b>APPEND</b> : which you can choose either to append the data to the existing file or overwrite it.
Please inform if the issue is not resolved.
Message was edited by:
        BINU RAJ BINU

Unable to stop Quicktime from playing certain file types

Recently, Quicktime has begun to insist on playing certain file types accessed via Web Browser. I work at a radio station and we have to be able to import certain audio from the web into our own player/editing software.
I have it set in the preferences that Quicktime not play any audio files.
We have had to restrict the installation of Quicktime on our systems.
Anyone know when Quicktime will allow us to really set preferences again?

Each user account can set their own preferences for QuickTime browser playback.
QuickTime Control Panel/Advanced/MIME Settings allow you to change those that will open via the QT browser plug-in.
If your page code is "sloppy" and you directly link to the audio files then you may get a wide vary of responses from the viewing browser. Some users will download the file while others may get a QuickTime playback in a "new" window.
Post a link to your page and we can view the page source code and help you with a solution.
Radio made America! I listen daily.

VOICE MEMOS and Wrong Time Stamps in Itunes

I've noticed that my voice memos in the new iTunes 11.1.3 (8) have incorrect time stamps all over them now. This is a real problem for me, since I need the dates that the messages were recorded. I just tested this out by recording a new one today (2/11/14) on my new Iphone 5s. It showed up dated 8/13/12 2:13pm. My phone has the correct date on it, so what gives?
Any solutions out there?
Not to mention the fact that there are NUMEROUS DUPLICATES of previous memos that have become weird artifacts in my iTunes library each time I've backed up my materials. AND the new iTunes setup makes it incredibly hard to *actually remove data* from my system. I am concerned my private material is no longer private, but being archived elsewhere for meta-data purposes.
C'mon, Apple. You're really slipping.

I see all timezones, have you tried setting the time/date manually? I'd do than, then pop an email to support.
Norwegian and a BB/PB user. Read what I mean, not what I spell.

Dreamweaver CS6 displaying the wrong icon for certain file types

I recently upgraded to the Maverick and I noticed that my Dreamweaver changed some of my files' icon to Acrobat Reader symbol. This does not represent the actual file type. My most important files, such as mp3 and m4v, are not displaying correctly. My concern is that it is affecting my website. How do I change the icons back to the original file type icons? Much needed help! Thanks!

What do local file associations have to do with your website? You have a severely wrong understanding of this stuff. Anyway, file associations on Mac can be changed using a right-click and Get Info and then choosing a new default program for the file type.
Mylenium

Certain files have disappeared from my computer, certain file types remain, and the folders remain. What happened to the files, any way to get them back?

First I'll give my specs:
MacBook Pro mid-2009
Memory: 8 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: OS X 10.9.4 (13E28)
This evening I woke my computer up and the first thing I noticed was the background image had changed.
Then navigating through my folders, all files have been removed except for *some" of the following file types:
Adobe Premiere Pro, After Effects, CeltX, Final Draft, InDesign.
Files I know were there this morning and are no longer there are: PDF, MOV, TXT, and others.
When I "get info" on one of the folders that used to be populated with files, the first file size that shows is the original (i.e. 2.3 gigs) but it quickly updates to the new size of an empty folder (6 mb).
I have checked to make sure I am still logged in as the correct user, I have reset the PRAM, I have reindexed finder, I have verified and repaired the disk and verified disk permissions. I have used Terminal to show all hidden files, and none of these things have helped.
No, I do not have a backup that I can restore from. Yes, I know it is stupid.
Any insight or suggestions are welcome.
Thank you!

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Read file latest entry with time stamp from unix

Hi
I have a log file which is being generated with an entry like this
Product20080228185707,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080229151029,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080320163241,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
Product 20080229151111,TRANSPORTED,862067_G,MPITT,20080415,ADEAMICIS,
I know how to read the file from Unix but How do I pick the entry with latest time stamp ?
Please help urgent
thanks

Hi,
Do like this.
1. Declare table with two fields as name(255) type c, timestamp(14) type n.
2. Loop at your entries and push entry name in name field and time stamp in timestamp field. You can move time stamp as: move file+7(13) to timestamp.
3. So your new internal table will have entry names and timestamp.
4. Now sort itab by timestamp descending.
5. Read itab index 1.
this will give you latest entry from unix.
i hope this helps,
Ags,

Can't set plugins (like Quicktime, to be run in FF) for certain file types

When I go to the application tab in options, I don't have the option to select a plugin for certain files - I'm trying to get Quicktime to open mp3s in Firefox, I know it can, it use to do that on my old computer, but Firefox doesn't give me the option - I see it listed for other files, but it doesn't appear for this one.
== This happened ==
Every time Firefox opened

Still more data. iTunes on the Vista machine will still not allow me to change the location of the iTunes Folder with the Browse button. It acts like the network doesn't exist.
But, surprisingly, if I go to File-Add File to Library, the network appears! Even stranger, File-Add Folder to Library, the network does NOT appear.
Again, the network is clearly operationaly, and iTunes can even see the network in the Add File menu, but refuses to see it in the Advanced menu or Add Folder.
It's not that Apple doesn't want me to be able to do this, because all of my XP machines running 7.6 do this flawlessly. There is clearly some bug between 7.6 and Vista.
Rummaging around the forums convinces me that this is a pretty common problem, but I haven't found an answer yet.
Thanks for any help,
Shawn M.

Back-up of Specific Files based on their Time Stamp

I use Time Machine, but I have 3 folders I like to back-up more frequently. I currently drag and drop them onto an external disk drive. This causes the Copy window to appear that says "An item named “XXXX” already exists in this location. Do you want to replace it with the one you’re moving? Apply to all?" etc. It then proceeds to write ALL files whether they have changed or not.
What I'm looking for is an app that does basically the same thing EXCEPT only re-writes the file if it has changed based on the time stamp of the file. Also, if the file is no longer in the source folder, it will delete it in the back-up folder. And if it hasn't changed, doesn't bother to re-write it and leaves it untouched, saving substantial time.
To be clear, I'm not looking for "Syncing" folders! I just want to back-up those files that have changed.
Thanks!

RalphTomaccio wrote:
I use Time Machine, but I have 3 folders I like to back-up more frequently.
More often than hourly?
What I'm looking for is an app that does basically the same thing EXCEPT only re-writes the file if it has changed based on the time stamp of the file. Also, if the file is no longer in the source folder, it will delete it in the back-up folder. And if it hasn't changed, doesn't bother to re-write it and leaves it untouched, saving substantial time.
CarbonCopyCloner and SuperDuper can do that, but I don't think you can schedule them more often than once per hour. They're used most often to make "bootable clones," but would work for your purpose as well. I don't use SD, but on CCC you could set up a "Scheduled task" and run it manually when desired.
[CarbonCopyCloner|http://www.bombich.com> is donationware; [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling.
You might want to investigate the Chronosync app; it might work, too.
And/or, see Kappy's post on [Basic Backup|http://discussions.apple.com/thread.jspa?messageID=12366915#12366915].
If you can wait until summer, and upgrade to Lion, it's "AutoSave" and/or "Versions" features might be helpful, too. See http://www.apple.com/macosx/lion/

File name with Dateand time stamp.

Hi All,
I want to generate a file with a date and time stamp.
For that in File Receiver adaptor i am using option "Add Time Stamp" in File Construction mode. however it is generationg file name as: FileName_20082104_121211_645.txt . In this I don't know what these last three characters "_645" are? And In the File name i only want a file name with datetime stamp . I don't require underscore in between. for eg: FileName_20082104121211.txt (FileName_dateTime.txt)
Can anybody suggest me the way to achive this?
Thanks,
Atul

@FileName_20082104_121211_645
The date time stamp in XI's file adapter will be in that format. This is to avoid over writing of files created simultaneously at the same time. So the last 3 digits is a form of an unique id to distinguish between the same.
In case you want the format as FileName_20082104_121211, use the dynamic configuration and create the file name inside the mapping itself and pass it across.
To get an idea about the same, ref:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - an usage of the same.
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm

How are user-entered MIME applications defined to open certain file types. This used to be standard in browsers.

In the not-terribly-recent past, browser Preferences allowed users to create associations between a file type (really, a file extension indicating its type) with an application used to run that type of file. Firefox seems to have buried this (on the Mac) in ~/Library/Application Support/Firefox/... ;in which seem to be an xml file.
Is it possible to edit this xml file directly, and if so, where in the xml file should a new entry be placed, and what is the explicit syntax of an entry (other than obviously copying present entries)?
These used to be called MIMEs.

I am trying to use a rather older programming language called Mozart, an extension of OZ. I installed it as a binary, but instead of storing its component binaries in a place like /usr/local/oz/bin/. they are all enclosed inside the /Applications/Mozart.app/Contents/Resources/bin/. which cannot be opened nor can a soft link be made to it located outside the Mozart.app wrapper.
The only alternative is to try to edit the mimeTypes.rdf files, and give it the full path name to the inside of Mozart.app were the program used for web applications is stored. It is stored in ~/Library/Application Support/Mozart/, which can only be accessed in more recent Mac OS X by going to finder and holding the Option key while opening the Go menu; this will make the ~/Library visible and accessible.

WRT610N certain file types have wrong time stamp

Similar Messages

Maybe you are looking for