WRT610N, current firmware is not loading.

Current available firmware for WRT610N is keep failing upgrade. When the progress bar reaches 20%, it says 'Failed'.

I am having the same issue, the nomenclature on all of the hardware revisions leads me to believe that they have the wrong firmware on V1. This is the older release V2 firmware. 1.00.03 B15 was release after 2.00.00.05. I was on chat with tech support, reset router, made sure firewalls are off, tried it on my mac. NADA failed at 20%
Hit up chat tech support, help escalate the problem. somone was hitting the bottle to hard when they were updating the firmware tables~

Similar Messages

Firmware will not load on Zen To

I just purchased a Zen Touch and I tried to upgrade the firmware to the 2...0 latest version. (You would think that Creative would ship new units with latest firmware, but they do not. Pretty lame). So?I downloaded the?latest firmware?to my desktop and ran it. When asked, I plugged in my Zen via the USB cable (in the rear of the computer/not front) and the firmware started to run. It then stalled and the Zen went into recovery mode and got stuck. I waited 0 minutes and nothing happened. I contacted Creative Service (did you know that they are located in Singapore?) and I explained the problem. We then spent an hour on the phone and did the following: () confirmed in device manager that the Zen is being recognized which it is, (2) reloaded the drivers, (3) uninstalled and reinstalled the CD software, (4) went into the registry and edited the USB settings as explained in the knowledge base to allow all users, (5) rebooted the computer, (6) redownloaded both firmware versions from the Creative download site, (7) tried re-running the firmware update. Even though the Zen is recognized in the device manager and it is shown on the desktop tray, firmware will not load and device will not sync and firmware update on desktop says that the device is not connected. Creative support then told me that the Zen was defecti've and to return it--which I did. I got a new one and the exact same problem occured. What is also interesting is that while the Zen Touch is a 40 gig player, but when I open it up (yes, I can even view the Zen dri've on the desktop and reformat it, which I did), the dri've reads as only having 20 megs instead of 40 gigs--which makes no sense to me.
Creative clearly has a serious bug issue to resolve. My computer is running on a P4 with Windows XP, with SP2. If anyone can solve this one, Creative should send them a free player and hire them. Please reply only if you are super knoweldgeable as I have wasted too much time and I am ready to pack this unit up and buy an I-Pod at this point. Thanks!Message Edited by randelcole on 2-02-200607:09 AM

This forum is for the Shockwave Player - the plugin for running Adobe Director files in a browser. You need a forum for the Flash Player - the Shockwave Flash plugin. Blame Macromedia for confusing the name space of the 2 separate and distinct plugins

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Java not loading up in firefox 15.0.1 but says is installed

I had to re-install Firefox 15.01 because I some issues with new fire Fox 16.01. When I re-installed Firefox and kept my currents profile, I had to re-install Java.
I installed both the 32 bits and 64 versions, Java show it is installed but none of the test are working.
Somebody else from here a few months ago had me go into the Firefox config for the plugin and had me turn something on.. I wish I made notes or took screen shot at least of what I had to do, But I forget what I had to do to get Java to work again with Firefox.
I do not remember what it was but currently Java is not loading up,
Even though I have UN-installed -reinstalled twice now and with no success.
Could somebody please help me please. I have browse forms and searched goggle but so far I have not found a solution to this problem.. I think it was known bug/issue with firefox 15.x
http://www.cis.upenn.edu/~matuszek/General/JavaVersionTests/JavaTests.html
none these are working.
Even basic Java test from there home page is not working..
<pre><nowiki>-----------------------
Java Deployment Toolkit 7.0.70.11
NPRuntime Script Plug-in Library for Java(TM) Deploy 1.7.0.7 Up to Date
Plugin Icon
Java(TM) Platform SE 7 U7
Next Generation Java Plug-in 10.7.2 for Mozilla browsers 1.7.0.7 Up to Date
Java(TM) Platform SE 7 U7
File: C:\Program Files (x86)\Java\jre7\bin\plugin2\npjp2.dll
Version: 10.7.2.11
Next Generation Java Plug-in 10.7.2 for Mozilla browsers
MIME Type Description Suffixes
application/x-java-applet Java Applet
application/x-java-bean JavaBeans
application/x-java-vm
application/x-java-applet;version=1.1.1
application/x-java-bean;version=1.1.1
application/x-java-applet;version=1.1
application/x-java-bean;version=1.1
application/x-java-applet;version=1.2
application/x-java-bean;version=1.2
application/x-java-applet;version=1.1.3
application/x-java-bean;version=1.1.3
application/x-java-applet;version=1.1.2
application/x-java-bean;version=1.1.2
application/x-java-applet;version=1.3
application/x-java-bean;version=1.3
application/x-java-applet;version=1.2.2
application/x-java-bean;version=1.2.2
application/x-java-applet;version=1.2.1
application/x-java-bean;version=1.2.1
application/x-java-applet;version=1.3.1
application/x-java-bean;version=1.3.1
application/x-java-applet;version=1.4
application/x-java-bean;version=1.4
application/x-java-applet;version=1.4.1
application/x-java-bean;version=1.4.1
application/x-java-applet;version=1.4.2
application/x-java-bean;version=1.4.2
application/x-java-applet;version=1.5
application/x-java-bean;version=1.5
application/x-java-applet;version=1.6
application/x-java-bean;version=1.6
application/x-java-applet;version=1.7
application/x-java-bean;version=1.7
application/x-java-applet;jpi-version=1.7.0_07
application/x-java-bean;jpi-version=1.7.0_07
application/x-java-applet;deploy=10.7.2
application/x-java-applet;javafx=2.2.1
Java Deployment Toolkit 7.0.70.11
File: C:\Windows\SysWOW64\npDeployJava1.dll
Version: 10.7.2.11
NPRuntime Script Plug-in Library for Java(TM) Deploy
MIME Type Description Suffixes
application/java-deployment-toolkit</nowiki></pre>

No only other I have is Adblock plus and I have tried it with off and on..
I set back to "plugins.click_to_play is false" and now I'm still getting
the error ' classnotfoundexception' window with error of
" Java12Tes.class" "
it seems to be same error I had several months ago when I was using FF 14.xx...
I have looked at the other old post and I still can not get Java to work..
Yet Java console is loading up.
updated:
Java not loading up in Safe mode either... I just tested, Closed all browser down and tried loading FF in Safe Mode, holding Shift key..
Still no luck..

Officejet Pro 8600 N911g new firmware will not install.

My printer: Officejet Pro 8600 N911g
Current Firmware: CLP1CN1416AR
My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
I turned my printer on/off.
I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
I tried updating via USB.
I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
Is there something wrong as to why this current firmware will not install?
Thanks for any help.

New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update"). Prior to new firmware install, printer has performed flawlessly...no problems. Immediately after printer updated it's firmware automatically I began to have multiple problems.
First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed". Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box. This is getting really OLD!! Simply unacceptable for a business class printer!!
Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!)
None of these problems have occurred prior to the automatic firmware update. I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created. I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update".
HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update. If there are problems, take responsibility for it and make it right. HP knows who it sent out auto updates to. These printer owners should be immediately notified and the situation made right. It is not real assuring to have your front line staff not know why the new firmware is not on the website. I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
I'd really appreciate a response back from someone in HP Customer Service.

HP Laserjet M2727nf - Firmware not loading to Printer

My printer display was not working so I ordered a new one. But as I read some postings it seems to be by formatter board. I baked the formatter board. After I baked it, the display would show: Hewitt Packard >>>>>. I did the below
but the firmware utility update is not going to the printer. The display shows ***BootDimm*** Ready 2 download.
I have left the jumper on and have taken it off to upload the firmware to the printer. Nothing has happened.   I have not even seen the display changing to erasing firmware, then programing firmware.
I baked the board and it started to work. I then Download the firmware utility update for my printer.  I Removed the printer left cover. Turned the printer on while it’s was connected by usb. Jumper or short the 2 pin connector - the display read "ready to load firmware". I heard the printer usb driver connect / initialize in windows-
Next I started the HP firmware update utility, select your printer from drop down list.   However the display did not change to erasing firmware, then programing firmware; finally it will display "firmware rom upload complete" - or something close to that. The computer did do this: the progress bar on the firmware update utility in windows completed and displayed the smiley face (about 3 min). Then I turned the printer off - unpluged it and disconnect the usb cable from the printer. It did not load. So where did I go wrong.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

I have been referred to by ITunes support. I purchased ' the traverling Wiilburys' via my Ipad, it downloaded with no problem, and, via the cloud was installed on my PC. However, it will not load on my IPod. All software is current.

I purchased 'the traveling willerbys via an ipad, it download onto the ipad ok and via the cloud onto my PC. However, it will not load to my iPod. All software is current and I have deleted the iPod and reload all music and audio files, everything loads ok with the exception of the travelling willerbys!!!!,. Any help please.

Did you check here:
Go to the iTunes store on your computer > Purchased (in the quick links section on the right) > sign in > Music
If it is already on your computer it will say "Downloaded" otherwise it will have a cloud icon with an arrow in it. Click it to download.

[SOLVED] ALSA firmware not loading properly with kernel 3.8.6-1

Hi All,
I have a E-MU 1820 card + breakout box that have been working beautiful under Archlinux for years but now something happen.
It still work OK under windows (dual boot same computer).
Normally during boot all indicators on the breakout box blink and then only thin show is clock setting indicator. But now all the indicators still blink but instead it is a -12 dB indicator that light up and not the clock settings and no sound.
dmesg show following.
[christer@Arch ~]$ dmesg | grep emu
[ 5.269612] emu1010: Special config.
[ 5.269731] emu1010: EMU_HANA_ID = 0x7f
[ 5.274685] emu1010: firmware file = emu/hana.fw, size = 0x133a4
[ 13.465727] emu1010: Hana Firmware loaded
[ 13.465776] emu1010: Hana version: 3.4
[ 13.465864] emu1010: Card options = 0x0
[ 13.465888] emu1010: Card options = 0x0
[ 13.466379] emu1010: Card options3 = 0x0
[ 14.486723] emu1010: Loading Audio Dock Firmware
[ 16.477785] emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x36
[ 16.477809] emu1010: EMU_HANA+DOCK_ID = 0x55
[ 16.477809] emu1010: Audio Dock Firmware loaded
[christer@Arch ~]$
aplay -l looks like it did before.
[christer@Arch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: EMU1010 [E-mu 1010 [MAEM8810]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
[christer@Arch ~]$
lsmod
[christer@Arch ~]$ lsmod | grep emu
snd_emu10k1 140245 1
snd_util_mem 2403 1 snd_emu10k1
snd_hwdep 6428 1 snd_emu10k1
snd_ac97_codec 113456 1 snd_emu10k1
snd_rawmidi 18831 1 snd_emu10k1
snd_seq_device 5268 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 78146 3 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7426 2 snd_pcm,snd_emu10k1
snd_timer 18934 3 snd_pcm,snd_seq,snd_emu10k1
snd 60156 13 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
[christer@Arch ~]$
From what I can see all looks OK, like it did when it worked, but something is not at it should.
Any thoughts or ideas about what might have happen or how to progress in troubleshooting.
All input most welcome.
I found info describing problem with firmware loading, but it is over my head.
http://git.kernel.org/cgit/linux/kernel … 54cf7008ab
Output from Aadebug ( http://alsa.opensrc.org/Aadebug )
[christer@Arch ~]$ ./alsadebug
ALSA Audio Debug v0.2.0 - Fri Apr 12 20:46:05 CEST 2013
http://alsa.opensrc.org/aadebug
http://www.gnu.org/licenses/agpl-3.0.txt
Kernel ----------------------------------------------------
Linux Arch 3.8.6-1-ARCH #1 SMP PREEMPT Sat Apr 6 07:27:01 CEST 2013 x86_64 GNU/Linux
Advanced Linux Sound Architecture Driver Version k3.8.6-1-ARCH.
Loaded Modules --------------------------------------------
snd_emu10k1 139271 2
snd_util_mem 2339 1 snd_emu10k1
snd_hwdep 6364 1 snd_emu10k1
snd_pcm_oss 38511 0
snd_mixer_oss 14995 1 snd_pcm_oss
snd_ac97_codec 112216 1 snd_emu10k1
snd_seq_dummy 1463 0
snd_seq_oss 29098 0
snd_seq_midi_event 5660 1 snd_seq_oss
snd_rawmidi 18742 1 snd_emu10k1
snd_seq 49946 5 snd_seq_midi_event,snd_seq_oss,snd_seq_dummy
snd_seq_device 5180 5 snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_dummy
snd_pcm 76956 4 snd_pcm_oss,snd_ac97_codec,snd_emu10k1
snd_page_alloc 7298 2 snd_pcm,snd_emu10k1
snd_timer 18687 3 snd_pcm,snd_seq,snd_emu10k1
snd 58893 14 snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_seq_oss,snd_emu10k1,snd_seq_device,snd_mixer_oss
Proc Asound -----------------------------------------------
0 [EMU1010 ]: Audigy2 - E-mu 1010 [MAEM8810]
E-mu 1010 [MAEM8810] (rev.3, serial:0x40011102) at 0xd000, irq 19
1: : sequencer
2: [ 0- 0]: hardware dependent
3: [ 0- 1]: raw midi
4: [ 0- 0]: raw midi
5: [ 0- 3]: digital audio playback
6: [ 0- 2]: digital audio playback
7: [ 0- 2]: digital audio capture
8: [ 0- 1]: digital audio capture
9: [ 0- 0]: digital audio playback
10: [ 0- 0]: digital audio capture
11: [ 0] : control
33: : timer
00-00: EMU10K1 (FX8010)
00-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1
00-01: emu10k1 mic : Mic Capture : capture 1
00-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture 1
00-03: emu10k1 : Multichannel Playback : playback 1
Client info
cur clients : 3
peak clients : 3
max clients : 192
Client 0 : "System" [Kernel]
Port 0 : "Timer" (Rwe-)
Port 1 : "Announce" (R-e-)
Connecting To: 15:0
Client 14 : "Midi Through" [Kernel]
Port 0 : "Midi Through Port-0" (RWe-)
Client 15 : "OSS sequencer" [Kernel]
Port 0 : "Receiver" (-we-)
Connected From: 0:1
Client 16 : "E-mu 1010 [MAEM8810]" [Kernel]
Port 0 : "Audigy MPU-401 (UART)" (RWeX)
Port 32 : "Audigy MPU-401 #2" (RWeX)
Client 17 : "Emu10k1 WaveTable" [Kernel]
Port 0 : "Emu10k1 Port 0" (-We-)
Port 1 : "Emu10k1 Port 1" (-We-)
Port 2 : "Emu10k1 Port 2" (-We-)
Port 3 : "Emu10k1 Port 3" (-We-)
Dev Snd ---------------------------------------------------
total 0
drwxr-xr-x 2 root root 60 Apr 12 20:42 by-path
crw-rw----+ 1 root audio 116, 11 Apr 12 20:42 controlC0
crw-rw----+ 1 root audio 116, 2 Apr 12 20:42 hwC0D0
crw-rw----+ 1 root audio 116, 12 Apr 12 20:46 hwC0D2
crw-rw----+ 1 root audio 116, 4 Apr 12 20:42 midiC0D0
crw-rw----+ 1 root audio 116, 3 Apr 12 20:42 midiC0D1
crw-rw----+ 1 root audio 116, 13 Apr 12 20:46 midiC0D2
crw-rw----+ 1 root audio 116, 14 Apr 12 20:46 midiC0D3
crw-rw----+ 1 root audio 116, 10 Apr 12 20:42 pcmC0D0c
crw-rw----+ 1 root audio 116, 9 Apr 12 20:43 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Apr 12 20:42 pcmC0D1c
crw-rw----+ 1 root audio 116, 7 Apr 12 20:42 pcmC0D2c
crw-rw----+ 1 root audio 116, 6 Apr 12 20:42 pcmC0D2p
crw-rw----+ 1 root audio 116, 5 Apr 12 20:42 pcmC0D3p
crw-rw----+ 1 root audio 116, 1 Apr 12 20:42 seq
crw-rw----+ 1 root audio 116, 33 Apr 12 20:42 timer
CPU -------------------------------------------------------
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
cpu MHz : 2000.000
RAM -------------------------------------------------------
MemTotal: 4051696 kB
SwapTotal: 51196 kB
Hardware --------------------------------------------------
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
05:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
Interupts -------------------------------------------------
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 1 1 IO-APIC-edge i8042
6: 1 2 IO-APIC-edge floppy
8: 0 1 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 4 1 IO-APIC-edge i8042
16: 529 493 IO-APIC-fasteoi uhci_hcd:usb1, pata_jmicron, nvidia
18: 10654 10645 IO-APIC-fasteoi uhci_hcd:usb3, ehci_hcd:usb4, uhci_hcd:usb8, firewire_ohci, i801_smbus
19: 3621 3626 IO-APIC-fasteoi uhci_hcd:usb7, snd_emu10k1
21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2
23: 0 0 IO-APIC-fasteoi ehci_hcd:usb5, uhci_hcd:usb6
44: 7637 7652 PCI-MSI-edge ahci
45: 11719 11736 PCI-MSI-edge eth0
NMI: 47 47 Non-maskable interrupts
LOC: 49551 45081 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 47 47 Performance monitoring interrupts
IWI: 0 0 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 28730 28313 Rescheduling interrupts
CAL: 94 54 Function call interrupts
TLB: 3503 3509 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
[christer@Arch ~]$
output from systemctl show somw inacive sound related sevices.
alsa-restore.service loaded inactive dead Restore Sound Card State
alsa-store.service loaded inactive dead Store Sound Card State
auditd.service error inactive dead auditd.service
display-manager.service error inactive dead display-manager.service
dmeventd.service loaded inactive dead Device-mapper event daemon
emergency.service loaded inactive dead Emergency Shell
lvmetad.service loaded inactive dead LVM2 metadata daemon
plymouth-quit-wait.service error inactive dead plymouth-quit-wait.service
plymouth-start.service error inactive dead plymouth-start.service
rc-local-shutdown.service loaded inactive dead /etc/rc.local.shutdown Compatibility
rescue.service loaded inactive dead Rescue Shell
systemd-...console.service loaded inactive dead Dispatch Password Requests to Console
systemd-...rd-wall.service loaded inactive dead Forward Password Requests to Wall
systemd-fsck-root.service loaded inactive dead File System Check on Root Device
systemd-...e8ee844.service loaded inactive dead File System Check on /dev/disk/by-uuid/9751ee37-e769-4bbe-9436-2d8e5e8ee844
systemd-...ev-sda2.service loaded inactive dead File System Check on /dev/sda2
systemd-...ev-sda4.service loaded inactive dead File System Check on /dev/sda4
systemd-initctl.service loaded inactive dead /dev/initctl Compatibility Daemon
systemd-...l-flush.service loaded inactive dead Trigger Flushing of Journal to Persistent Storage
systemd-...ed-load.service loaded inactive dead Load Random Seed
systemd-...ed-save.service loaded inactive dead Save Random Seed
systemd-...ad-done.service loaded inactive dead Stop Read-Ahead Data Collection
systemd-shutdownd.service loaded inactive dead Delayed Shutdown Service
systemd-...s-clean.service loaded inactive dead Cleanup of Temporary Directories
systemd-...unlevel.service loaded inactive dead Update UTMP about System Runlevel Changes
systemd-...hutdown.service loaded inactive dead Update UTMP about System Shutdown
ypbind.service error inactive dead ypbind.service
emergency.target loaded inactive dead Emergency Mode
final.target loaded inactive dead Final Step
nss-lookup.target loaded inactive dead Host and Network Name Lookups
nss-user-lookup.target loaded inactive dead User and Group Name Lookups
remote-fs-pre.target loaded inactive dead Remote File Systems (Pre)
remote-fs-setup.target error inactive dead remote-fs-setup.target
rescue.target loaded inactive dead Rescue Mode
runlevel1.target error inactive dead runlevel1.target
runlevel2.target error inactive dead runlevel2.target
runlevel3.target error inactive dead runlevel3.target
runlevel4.target error inactive dead runlevel4.target
runlevel5.target error inactive dead runlevel5.target
shutdown.target loaded inactive dead Shutdown
syslog.target error inactive dead syslog.target
umount.target loaded inactive dead Unmount All Filesystems
All the best!
Christer
Last edited by agkbill (2013-04-15 18:41:03)

Thank you mich41!
It looks like a kernel bug.
I downgraded to 3.7.10-1 then firmware loaded OK and I could play sounds.
Upgraded to 3.8.6-1 then the firmware fail to load.
Something looks not ok with 3.8.6-1.
Best regards,
Christer

You tube will not load in firefox 8 windows 7 ...Works fine on IE! flash is current

YOU TUBE will not load in Firefox 8 Windows 7 ...Works fine on IE! Flash is up to date. New laptop

See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can see all exceptions in Tools > Options > Content: Load Images > Exceptions

I recently purchased a Hyundai Elantra. My IPod will not load. Other similar IPods will load. Someone said I need to update my firmware. How do I do this?

I purchased a Hyundai Elantra. My IPod will not load. Trying my son's Ipod, that one loaded. The cable and the automobile software do not seem to be the problem. Someone suggested that I need to update my firmware but I do not know the steps in going about doing this. Will someone out there list them for me. Thank you,
Pat

Opoen itunes. plug in ipod. It should let you now if there is an update.
If not, then click Check For updates.
http://support.apple.com/manuals/

Since update, various sites load very slowly and some do not load until "Reload Current Page" is clicked several times.

Since Firefox update (6.0.2) many sites load very slowly and some do not load at all (green circle rotates infinitely) until "Reload Current Page" is clicked on 2 to 12 times.
Returned to version 5. No more slow load.
Automatically re-updated me to 6.0.2 and now slow again.
Returned to FF 5 again and turned off automatic update.
Downloaded 7.0.1 and the problem seems to be solved.

Same here, only that updating to 7.0 or 7.0.1 doesn't seem to solve this issue. Seems to have something to do with loading images (e.g: adobe.com stops loading when "wwwimages.adobe.com" is being loaded. imdb.com, on the other hand, seems to load images very slowly and not all of them).
Safe-mode. disabling add-ons, clearing cache and cookies and checking for malware doesn't help.

32DV504B -TV Firmware not loading/showing on TV

Hi all,
I have downloaded the latest firmware upgrade for my TVs (x2) - 32DV504B. I have copied the downloaded file to a USB drive and plugged into the TV. I cannot seem to get the file loaded at all.
I have tried numerous USB drives, numerous formats (FAT, FAT32 etc) - exe on it's own, extracted but no matter what I do I cannot get the upgrade done, I have tried to boot into the USB, I have tried the settings, search for upgrade - white bar just stays at zero saying searching.
any help would be appreciated.
Regards
Barry

Emmm….. I’m wondering where did find the firmware for this TV model... I checked the Toshiba download centre and this TV isn’t listed…
I guess the firmware update cannot be performed because the firmware might not be fully compatible…

Intel iMac Firmware not loading

I tried to install the new Intel iMac firmware so I can try out bootcamp. The firmware installer powers down fine and then I hold the power button and it flashes but then it gives a long tone and does not update the firmware but boots OSX back up again. What does this long tone mean? Why doesn't the firmware load? Do I have to keep holding the power down until the firmware progress bar starts or just until the power button flashes? The instructions seem to say hold down the power button until the power light flashes then it should load from there. But unfortunately it doesn't. I've reset the pram but that didn't help. Anyone have any ideas?
Thanks.
Intel iMac Dualcore 2GHZ Mac OS X (10.4.6)

Firmware will not update if you installed the Windows hack. You will need to reformat and reinstall OSX 10.4.6 and then apply the firmware update. This fix was found by macfixit.com who had a macbook pro they had installed the windows hack on.
Once the drive is setup normally with OSX the firmware will install.

Mail does not load current emails

mail application does not load current email. when i delete messages mail downloads olkder messages, not current or new.

If it doesn't download new mail, it is possible that you are not connected to the mail server. Try to check if you have internet connection on this phone.
Good luck.

WRT610N, current firmware is not loading.

Similar Messages

Maybe you are looking for