WRT610N does not connect with O2 Atom Exec (11b)

Hi, the Atom cannot *see* this router at all, although the latter is visible to another phone and laptops.
WRT610N is on Mixed mode on 2.4GHz.
First time the Atom can't see a net.
It's able to see my neighbours' mix of linksys, d-link, etc routers though (I'm in an apartment).
It's a pure 11b device.
Any suggestions?

Configure the Wireless Settings on your router...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab-
-Here select manual configuration...
2.4GHz Wireless Settings :
Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the standard channel to 11-2.462GHz...
- And wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless-
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
5GHz Wireless Settings :
Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network.
Set the Radio Band to Wide-40MHz and change the Wide channel to159 and Standard Channel to 161-5.805GHz...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Now see if you can locate your Wireless Network and attempt to connect...

Similar Messages

My bb torch 9860 does not connect with desktop software

My phone is not working (start) i want to reload my os but i lt does not connect with desktop software...plz help me out

Duplicate :
http://supportforums.blackberry.com/t5/BlackBerry-Torch/after-restart-reset-its-hang-on-main-screen/...
Hi there,
One thread is enough for an issue
Please check you existing thread !
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

I have a ipad 2 and it does not connect with safari using 3G

I have a ipad 2 and it does not connect with safari using 3G

Sorry to hear you are having issues, but there are 2 ways you can print from that device.
The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Airplay does not connect with pioneer vsx-1121 anymore

After latest iTunes update airplay function does not connect with my pioneer vsx 1121 receiver anymore. I can see the reciver in the list when I click the airplay button but it does not connect and music keeps playing trough the laptop speakers. I am running win 7 and everything worked fine before the latest iTunes update.
Any ideas what is preventing the proper connection?

I am having the same problem. From my Ipad the pioneer vsx-1021K is visible. It connects, sound begins then stops after 2-3 seconds. This began in the last month. Infuriating. I can stream from my android to the device using double twist. I can stream to other devices like apple tv and Android apps like "hifispeaker" (a Airplay receiver for android).
What changed? It seems like there is something in the most recent Ipad updates? Some interfering application?
the Ipad is using IOS 6.1.3

Iphone 4S bluetooth does not connect with any other Bluetooth

Iphone 4S bluetooth does not connect with MacBookPro Bluetooth or any other Phone with Bluetooth. Can someone please help !!!

Hi There!
I am having the same problem, my brothers samsung picks up every bluetooth device thats remotely close but the 4s just sits there searching while sitting on the same desk as my iPad2, iMac 24" and headset that worked fine on my old 3 g.
I am not hugely tek savvy, can anyone explain in easy speak (the kid at the local apple reseeler told me the new bluetooth used on the 4s is not compatible with the older bluetooth devices.... hmmmmmm)
There must be a solution..... Thanks in advance

I have updated my macbook air to OS X Yosemite. Now my computer does not connect with my HP printer 1300. What do I need to do to resolve this problem?

Hello,
I have recently updated my mac book air to OS X Yosemite. Now my mac book air does not connect with my HP Laserjet 1300 printer. Can you please tell me what to do to solve this problem?
Thank you very much.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

My Sennheiser MM550-x connected perfectly with iPhone 4s. It does not connect with iPhone 5s bluetoth. Ayone else with this problem?

Hey araho!
Here is an article for you that will help you troubleshoot this Bluetooth issue:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Nokia 5230 does not connect with USB

When I plug the cable in my phone and notebook, the phone asks me to select the connection type. I select PC Suite. I have downloaded the latest version, but PC Suite does not connect with my phone.
I use Windows XP Home Edition SP2
I don't have a clue about the cable type, but it fits.
There is no SD card in it
Does anyone have a solution to this problem?

In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
http://www.filehippo.com/download_ccleaner/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

MY IPHONE 5 does not connect with 3g only wifi

MY IPHONE 5 does not connect with 3g only wifi

Has it ever connected to 3g?
If this is a recent problem perhaps you've reached your Mb limit: if it never has connected are you sure you're paying your carrier for cellular Internet.

My ipad 4 does not connect with my home wifi network

my ipad 4 does not connect with my home wifi network

Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Safari Does Not Connect with My Domain

Safari 5 (as well as Firefox) will not connect with my domain (gorvray.com) But, my handheld (Droid) connects just fine. Cute for Mac FTP, FileZilla FTP and Yummy FTP all will not connect with gorvray. But, net2ftp connects just fine. I have repeatedly cleaned the cache in both browsers, including using Washing Machine, to no avail.
All this trouble started with the internal FTP on an application automatically insisted on setting my URL as gorvray.com/gorvray.com. I attempted a work around, and it has been all downhill since. I installed a backup of my website from two weeks ago. I thought at the time that it had disappeared. I realize now that it had not.
Does anyone have an idea of what is going on?

All three URLs you offered work fine for me.
Try Open DNS:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security:
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network: please refer to this page: http://www.opendns.com/start/bestpractices/#yournetwork and follow the advice given.

Why iPhone 4 does not connect with the charger or mac but charges when it is powered off and connected?

My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?

I hope you are having a great and sorry to learn that you are having this issue;
Since I could not check what version of the laterst firmware, I hope you don't mind doing the following in your printer:
Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
Touch Settings . The product control panel displays the Settings menu.
Touch Product Updates .
Touch Check for Product Updates Now .
Wait for any updates to download and run.
If you using Win XP or later please run this tool to see if you get any errrors Click here
Is your printer on warranty? if you do not know you can use this tool; GO HERE.
Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

IPod nano does not connect with wireless earphone via bluetooth transmitters.

My iPod nano(6th) can not connect with wireless earphone via bluetooth transmitter.
I want to know which is wrong iPod nano or bluetooth transmitter...Now I tried with i10s because I thought previous one (motolora) might be wrong.
But both can not connect.

Sounds good. Hopefully they can provide you with an accurate answer.
B-rock

A pop-up window advising of software update for Firefox appears and does not connect with server

The window suggests strongly that I update software but when I attempt to update it does nothing but try to connect with server and never does

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder.
You may need to delete active-update.xml and updates.xml as well if present.<br />
XP:
C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)
If you have problems with updating then best is to download the full version and uninstall the currently installed version.
You may need to remove the Firefox program folder to do a clean install of the new version.
Do a clean (re-)install:
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Macbook air does not connect with iPod

I have an Ipod Nano 6th gen that will not link up with my Macbook air 15" 2011. It does not show up on Itunes nor in my Finder menu. I have reformatted the device, reinstalled Itunes 10, and have verified that my USB cable is in proper working fashion. I am only experience this issue when i try to connect apple products with my macbook; my blackberry syncs just fine with my macbook. I really need to know what I can do to get my Macbook to start accepting connections with Apple products. Please help soon! thanks!

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update

WRT610N does not connect with O2 Atom Exec (11b)

Similar Messages

Maybe you are looking for