Wrt610n doesnt see attached wd mybook

Hi everyone ...
Just got the wrt610n and updated to latest firmware 1.00.02 B10.  All is working great except usb storage link.  I have a 250 gb wd mybook ntfs formated.  When I plug it in the usb indicator lights up but when I go to 'storage' tab it doesnt reflect the drive bing attached.  I have tried refresh and rebooting from admin utility.
Also, as expected I cant see the disk from vista-64 gigabit LAN connection or xp sp3 laptop connected with wpc600n adaptor.
Any ideas?  I have searched these forums and results seem to be all over the place.  Though it seems most can at least see the drive when logged inot router.
Thanks for any help.

First make sure you can see the Hard Drive when connected straight to the computer...If you see the Hard Drive it's fine...
As you mentioned you Upgraded your router to the latest Firmware, after Upgrading you must reset the router to factory defaults and then re-configure it, if you have not resetted your router since the last Upgrade you must reset it...
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
NOTE : Make sure you have no HD connected to the router while resetting...

Similar Messages

  • Attach WD Mybook to Airport Extreme?

    How to attach WD MyBook to 4th Gen AirPort Extreme?  I hook up and can only see iut when my laptop is plugged in with a wire.  cannot access drive though just see it though Airport Utility.  When uplugged using wireless cannot see it al all.  Help!

    Sorry for the late reply. 
    I have a WD My Book Essential 3GB (Model WDBACW0030HBK-00).  Formatted as NTFS.  I am able to see the Airport Extreme when I am Plugged In (Non Wireless) when in AirPort Utility.  I cannot see it when I am Unplugged (Wireless) when in AirPort Utility.
    Operating System is Windows 7 with Service Pack 1. 
    Computer is Toshiba Satelite P505D with AMD Turion II Duel Core Mobile M520  2.30GHz Processor
    64 bit operating system 
    4GB Ram.
    Airport Extreme Model  802.11n 4th Gen
    Able to get to the web via wireless so no problem there.

  • My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

    My 3GS will not charge. I have tried it from my computer and from a wall socket. I also have tried another computer and a different cable with no luck. My computer doesnt see the device either. I havent had any issues until now. Any ideas?

    bring it to Apple for battery diagnostics.

  • I have a Macbook pro thats prints fine to my HP printer, but when I try and print from my iMac it doesnt see the pages and just prints two blank pages. Even thou the document is a number of pages

    I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
    Could you please help
    Michelle

    Right click the printer in System Prefences -  Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....

  • Itunes OR my computer doesnt see my iphone 4.. help

    so weird thing.. im on a PC and when i plug in my new iphone 4 is makes that binging sound but it computer never sees it in My Computer or auto play. And i have the latest itunes, but itunes still doesnt see my iphone either. And it doesnt charge the phone when i plug it in. Ive switched usb ports as well. When i plug my old iphone 3g everything works fine, but not with the 4. help

    Hello,
    Try restarting your iPhone 4 by holding the power and home button at the same time until it reboots.
    Are you plugging this into USB 1.0 or 2.0?
    Is the cable squared-shape or curved-shape? Try and use the one that came with the iPhone 4.

  • My computer doesnt see black in the printer regardless of cartridge

    I have 2 printers and my laptop now doesnt see/print black in either printer. I have changed cartridges to no avail. I upgraded about the same time it all went pear-shaped (but not certain about dates). Help!

    Don't know what you mean by, "doesn't see print black." In any case do the printers have names and models? Are you using the latest drivers? Where are you looking for this "print black"?

  • Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

    My Cisco Prime Infrastructure ver. 1.2.1.12
    Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
    Please let me know how to access or enable the feature.
    Thanks,
    Tek

    This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV. 
    Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

  • What is wrong with the table om page 2 (see attached file)

    What is wrong with the table om page 2 (see attached file)

    MySpecialSceenName wrote:
    But there are several empty lines under the text...........
    I'm guessing that by that you mean space for several lines, not empty paragraphs. This could be caused by any number of things, but not allowing hyphenation, or hyphantion rules that are too restictive might cause ID to be unable to break a line which would cause it to go into overset, as would possibly some combinations of Keep Options if there is more than one paragraph in the cell or if there is not enough room to fite the entire paragraph and you are just one line short with keep options requiring at least two lines be kept together at the end, for example. Applying No Break to a sting too wide for the cell would do it too.

  • Can the text that says "See Attachment" that appears in the body of an e-mail be edited?

    When I attach to an e-mail, text that says "See Attachment" appears in the body of the e-mail. I would like to edit this text to say something else. I cannot find where this text is stored in the settings, and I am not even sure if it is generated by thunderbird or by the software that I am using that invokes thunderbird.
    Does anyone know where this text is stored, or if it can be edited?

    There is nothing like what you talk about, so I am unsure what the question is really.
    When you click on write a mail and then add an attachment I see nothing, but an attachment name in the top right corner of the email.

  • New update mac can't play vimeo can't play embedded mp3 can't see attach line in hotmail just a big mess

    See above. mac 10.6.8 latest firefox just a terrible mess cannot see
    "Attach" line in hotmail email replies so cannot attach files. Cannot see photos in "slideshow" format in hotmail. Cannot see embedded Mp3 files (appear for 1 second then gone!). Cannot play Vimeo
    video-drags and does not load and sometimes no sound.
    All this was perfect before!! What a mess!!

    You are posting in  the wrong forum, You should ask your questions here..
    (However, just to say that QT Pro comes with the FCP 7 installation; you shouldn;t have to buy a license.)
    Russ

  • I uninstalled and reinstalled but at the end of installation there were erros.  See attached screen shot.  I now cannot open the application.  error code 10810 comes up when I try to open.

    I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors.  See attached screen shot.  Now I cannot open the application.  Error code 10810 comes up when I try to open (see 2nd screenshot).  Please help.  I have now lost photoshop altogether whereas previous at least I still could use it but could not update.  Thank you for any help to instal successfully.  Dr Koh

    Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
    ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
    Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
    Dr Koh

  • HT3231 Migration assistant doesnt see external hard drive

    Mac OS 10.7.5  Intel 2 gHx Core 2 Duo.  Just replaced a crashed hard drive.  Migration assistnat doesnt see external hard drive, although it is on desktop and working fine.  Connected by USB.  I have a backup on the external drive.  Too large to place on internal hard drive.  So frustrating!  I looked at forums online, no help.  Any ideas?

    1.  Definitely 10.7.5
    2.  I'm not convinced it is a TM drive.  It has been used as such, but I am not sure of its current status.  Of note, Time machine is currently using it, but I get the sense that it only uses part of the drive.  The file I want to use is in a seperate directory of the external hard drive than backups.backupdb, where Time machine is currently writing.  The file I want to use is called "Untitled - 2012.01.16-10.17.00.766.FullBackup" and the file type is package.  Of note, Time machine let's me have the option to restore the stuff it has been writing for the last few days.  Migration assistant, however, is not so cooperative.
    3.  I have been opening migration assistant, putting in password, choosing "from a Time machine backup or other disk", and then it shows only "Mac OS" as an option under "select your system". 
    Thanks for your interest and help!

  • The strangest thing: My mac doesnt see ONLY Win7 cd

    Hi guys,
    Check this out: I bought parallels 5 and Win 7 home edition, in order to put on my mac. Parallels installation was nice and smooth, i created virtual machine and insterted Win 7CD. (official)
    And here came the strangest thing: my mac doesnt see it! I ejected the cd, and put in other cd (in this case Starcraft 2), and voila it works, the install image pops up and i see the cd in finder. I put in this very Win 7 cd in the other mac...and it works, finder sees it and i can access it.
    However when I put it back in my macbook pro, it keeps spinning it and seems to think its blank, cause iDVD pops up after 2-3 minutes. Parallels 5 doesnt see it, Finder doesnt see it either. What could be the problem? Any ideas welcome
    P.S. just tried this Win7 cd on G5 (OS 10.4.6): no problem, took it to the shop and tried it on the shop's MBP: no problem. Tried inserting other CD's in my MBP (as mentioned above they were Parallels, Starcraft2, and Snow Leopard): absolutely no problem. But when i insert this Win 7 CD in, my MBP doesnt recongize it. My brains are fried as I cannot think of one single possibility of what might cause this strangest issue. (tried another Win7 cd, same thing)
    Mac OS X 10.6.4/ Mac Book Pro 2.66 Intel Core DUo/ 4GB
    this Mac was bought in October 2009 from official store

    Actually, it's not that strange at all.
    Apparently due to the type of media Microsoft burns the disks on, some drives just don't like it. I had to make a copy of a Windows 7 DVD on my Mac Pro because the drive in a PC refused to read it even though it had no scratches or damage and the drive would read every other disk fine. When making the copy of the disk in my Mac I found that the Apple-shipped SuperDrive would read the disk but my aftermarket DVD burner in the second drive bay would not.
    So, your options are to image the drive on another computer and burn a copy, or track down a USB DVD drive and install it from that.
    Parallels will install from an ISO so if you can image it on your G5 and then just copy it over the network it will work. You can also enable CD drive sharing somehow, but I've never done that before.
    EDIT: I wanted to comment that all the drives I have encountered that would not read the disk were TSSTcorp drives.
    Regards,
    -Ryan

  • Device update for ipad doesnt see internet connection

    My itunes program in the device update section for my ipad doesnt see my internet connection. In diagnostics it find all but the connection. it says internet connection failed. store is active and online im connected to internet yet the little update button for ipad doesnt recoqinize my internet connection?

    My itunes program in the device update section for my ipad doesnt see my internet connection. In diagnostics it find all but the connection. it says internet connection failed. store is active and online im connected to internet yet the little update button for ipad doesnt recoqinize my internet connection?

  • TS1363 my itunes shutdown ion the middle of updating to ios7 on my ipad? Now it doesnt see it - how do i restore my ipad

    My itunes shutdown in the middle of updating my ipad to ios7, now it doesnt see the ipad, and the ipad is stuck in the update.  how do i fix?

    Hi Nitrous Granny!
    I have an article here that can tell you how to restore your iOS device:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    If your iOS device is still having trouble restoring after that article, you may need to try the steps in this article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

Maybe you are looking for

  • IEspChg failing in a script on Win 7

    I have a line in login script: \\server\sys\PUBLIC\IEspChg http://internalpage.domain.com Ofcourse I can do that by policies, registry entries etc (but that is not the point) This works perfectly fin on XP with latest client & IE8 On Win7 x86 is just

  • IFCU in R/3 4.7

    Hi All Pl confirm me whether IFCU can be used in 4.7 Version. I have activated EA-PLM also done all configs under Consumption relevant Counter Reading Update. When I select the Fluid type in IFCU it is not accepting the Fluid type configured and thro

  • Printing only an extraction of a canvas

    Hi! I have a poblem printing only an extraction of a canvas which itself contains some boxes with labels, etc... Canvas (scrollRect = new Rectangle(.....)) +---Box | +---Label | +---Label +---Box To achiev my goal I set the scrollRect to my desired c

  • Cannot connect to Activation Server

    My system is Windows Vista. Recently installed ADE 3.0.  I tried to open ACSM file, both with & w/o authorization ID. Both times, I get the same error:  cannot connect to Activation Server My internet connection works. So, I configured my Windows Fir

  • How to send notifications

    How to send a notifications to an user in OAF; the tool used is Oracle 9i JDeveloper. We are not using any workflow, but on submitting a page for approval , we need the approver to be notified. Please give me some insight on how to do this, i. e The