WRT610N Help with the network mode changing to an A.
Hello All,
I just purchased a WRT610n Router, the wireless n adapter, and the gaming router, My question to you the customer is have any of you had problems with the gaming router switching to a wireless A network mode , I have my gaming system on 5nhz and I want the transfer rate to be at the highest possible rate and I know switching to an A network will change that transfer rate I am only 25 feet away on one level so any suggestions would be helpful or comments as well.
Message Edited by ChrisM1981 on 01-19-2009 11:14 AM
Hello,
I have WRT610N, WGA600N, and I am on Comcast Broadband Transfer Rate Of 1GBPS on my p.c. and the transfer rate on my notebooks is 130MBPS to 230MBPS also I am running my gaming System on the Dual Band 5NHZ like I said I am on one level with nothng between the Router & Adapter so I am wondering why it is transfering to 802.11a Frequency because I know that lowers Tranfer Rate from a Wireless N Frequency so any help you can give me that would be great.
Thank you
Similar Messages
-
Trying to change reset my Apple ID as I can't remember it, however it is sending an email which says invalid link or a list with the option to change password which can't be clicked on? Can anybody please help? Going around in circles! Grrrrrrrrrrr
Is this your machine or the company's? Machines that came with Snow Leopard or earlier installed come with system and software install disks that can be used to reisntall the iApps that came with the machine orignally.
If this is your machine and it came with Snow Leopard or earlier installed the disk will look slimialr to one of these:
If it is the company's machine see if they have the disks.
Do a custom install and then use Software Update to update iPhoto to the highest version that is available. -
Whats wrong with the Network?
What is wrong with the network? for about two days now i havent had 3g or 4g on my phone (droid razr maxx) just out of the blue it goes off my phone and hasnt come back. Does anyone know what happend?
Yorktown301, that's very strange, but I'm here to figure this out! Are you still having problems connecting to 3G or 4G? Let's first verify that no settings on the phone were changed. Go to Settings, More, Mobile networks, Network Mode. Ensure LTE/CDMA is selected. Go back to Settings, Data usage and make sure Mobile Data is on. If still no change, remove both your battery and SIM card for about 30 seconds. If you're still having problems, let me know what zip code you're located in.
MarquiaF_VZW
Follow us on Twitter @VZWSupport -
Help with Expect command to change config on hundreds of ASA's.
Hi All,
I'm looking for some help with the Expect command to automate some tasks, I'm certainly no programmer but I am struggling, here is an example of my script.
#!/usr/bin/expect -f
# This simple Expect script will add a new Syslog destination in
# Cisco switches (IOS based)
# We assume here that all switches uses the same credentials
# for the administrative tasks
# Define variables
set password "site1"
set enablepassword "site1"
# Define all the switches to be reconfigured (separated by spaces)
set switches "site1 site2 site3"
# Main loop
foreach switch $switches {
puts "Processing switch: $switch";
# Open the telnet session:
spawn telnet $switch
# Perform authentication
expect "Password:"
send "$password\r"
expect ">"
# Switch to enable mode
send "en\r"
expect "Password:"
send "$enablepassword\r"
expect "#"
# Enable configuration mode (terminal)
send "conf t\r"
expect "#"
# Modify VLAN1
send "interface vlan1\r"
expect "#"
# Change VLAN1 Description to Uppercase
send "description INSIDE\r"
expect "#"
send "exit\r"
expect "#"
# Save config to NVRAM
send "wr\r"
expect "#"
#Logging out
send "exit\r"
expect eof
In the example this works fine for SITE1 passing the credentials SITE1 as the default password and SITE1 as the enable password. I need to do usernames and passwords that are different for each site. I have to make some changes across hundreds of ASA's to terminating tunnels to a new location. Can anyone help out in how to do this, I know I am close I just need it to read, siteA, username, both passwords from a text file, etc
GregHello,
try to modify this example to your needs ->
http://www.bitpapers.com/2012/04/cisco-changing-configurations-of-many.html
Best Regards
Please rate all helpful posts and close solved questions -
Hi can you help with the following panic attack report,
hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report: 1
Anonymous UUID: 7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI 4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.driver.AppleUSBCDC 4.1.15
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.7f9
com.apple.driver.AppleMikeyDriver 2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics 7.1.8
com.apple.driver.AGPM 100.12.42
com.apple.kext.ATIFramebuffer 7.1.8
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleMuxControl 3.0.16
com.apple.driver.AppleLPC 1.5.3
com.apple.ATIRadeonX3000 7.1.8
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.0.3
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 513.20.19
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 4.5.8
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.3.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.1
com.apple.driver.AppleIntelCPUPowerManagement 167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.3
com.apple.iokit.IOUSBMassStorageClass 3.0.1
com.apple.kext.triggers 1.0
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.DspFuncLib 2.1.7f9
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOBluetoothSerialManager 4.0.3f12
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleHDAController 2.1.7f9
com.apple.iokit.IOHDAFamily 2.1.7f9
com.apple.iokit.IOAudioFamily 1.8.6fc6
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.kext.ATI6000Controller 7.1.8
com.apple.kext.ATISupport 7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB 7.1.8
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController 4.0.3f12
com.apple.iokit.IOBluetoothFamily 4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter 1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.1
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.3
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.3
com.apple.driver.AppleThunderboltNHI 1.3.2
com.apple.iokit.IOThunderboltFamily 1.7.4
com.apple.iokit.IOUSBUserClient 4.5.8
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 412.2
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.8
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331.3
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.8
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software. -
I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work
Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H -
Need help with the session state value items.
I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM -
Labview locks at startup with the network cable attached
I have an embedded application that is running winXP and Labview 7 Express. I have my VI running from the startup menu as I have no keyboard, mouse or monitor normally attached. the application uses TPC to commincate over a wireless network. When I boot the computer with the network hooked up Labview locks up and a few minutes later the computer shuts down. If I close Labview from Task Manager and restart the app it works fine. The TPC part of the application is not running until a toggle switch is activated so the TCP part of the program is not active at start up.
Any help would be appreciated.Is it possible that Labview is trying to run the application before windows has fully come up?
-
Need some help with the Select query.
Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
DeveloperHello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer. -
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.
what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle -
Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause. it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
The error message goes on :
File: \Boot\BCD
Status: oxcoooooof
info: An error occurred while attempting to read the boot configuration.
the only two options on the screen are enter=continue and ECS=exit
I just can't get pass this screen.
Please help.
ThanksHi,
If you don't already have one, use another PC to create a Windows 7 Rescue CD. Download the relevant ISO from the links below.
Windows 7 32bit
Windows 7 64bit
You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Need help with the noise reduction settings
Hi,
After som experimenting I need some help with the settings for noise reduction.
I just edited and converted a few pictures from RAW (D200) til 8-bit TIFF. Opend the file up in photoshop and was shocked to see the amount of noise in the pictures. I then exported the RAW-files and did the same conversion in Capture One 3.7.3 - The result is a lot better regarding noise. In capture One I'm using the noise reduction step before "High".
Can you share your experience with the optimal settings for best noise removal ?
Thanks in advance,
fbrosei use it once in a while, but i play around with the sliders in full screen mode and at 100% and then see what the sliders do. I don't have a definite procedure that I can suggest though.
-
I am needing help with the final steps in restoring my iPod Touch 5
I need help with the final steps in restoring my iPod
I was told that the iPod would automatically go to restore mode when connected to wifi. It did not do that
-
I need help with the Web Application Certificate
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.
Maybe you are looking for
-
ICloud storage issue; Restoring iPhone calendar from iMac after accidental iCloud deletion
I set up iCloud to back up calendars and contacts and for find my phone. Initially, it seemed to work alright. Then I got messages on iPhone that there wasn't enough iCloud storage, even though the storage tab showed that I had used none of my iClo
-
How to read file before executing everything else in VI
I am using the "Read from measurements file" .vi to read read in a .lvm file containing the data I want to use in my VI. I have two different files I need to read into the VI. After I click "run" the prompt comes up and I select my desired file, th
-
I just want all my searches to stay on the same tab that I already have open.
-
When I buy a tv show on my iPhone from my iTunes account how do I get it to not transfer to my friends iPad which is also under my iTunes account?
-
Is my Iphone 5 never lock(SIM free)? How can I check?
Hello I am from Russia and I just bought it in BestBuy. I do the activation via iTunes. But now I start to recive a messages saying "iphone is not Activated contact your carrier at 18009220204..." what does it mean? In the store I was told that it i