WRT610N NAS NTFS issue for deleting directory
Dear all,
I got one issue with the WRT610N and the NAS feature. This is really a nightmare. I have been looking everywhere, I found people with the same issue but never find any solution.
I am running Vista on a laptop connected to the WRT610N via the 802.11n link but the issue is not here.
I have a hard drive of 40GB (but same issue exist with another drive of 500GB) plug to the USB port. I can read all file without any issue. I can also add file without any problem. The problem come when I try to delete some directory. In this case I got the an 0x8007045D Error indicating that I need to have the right permission for doing this. However I do not have any issue in deleting files. In case I delete all files from a directory I can't delete the directory without the error. I map the drive to the windows explorer with the admin account which give read and write access.
Without this fix the NAS feature can only be used in read only!
Could you let me know if you had the same issue? If you solve this could you post the way to fix it? or maybe am i doing something wrong?
Your help will be very appreciatated.
Regards,
PS: I am also running the latest firmware (v1.00.02 B10). The problem was also present with previous software.
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 03-22-2009 10:28 AM
I have been in contact with the on-line linksys support last week-end. They said that I should have a feedback of the issue by e-mail. I received the e-mail today from lynksys UK support. They asked for more details of the issue and then I just provided them more details of the issue including screenshots. I hope this will be fixed otherwise the NAS feature is just useless for me. I use the NAS for automatic backup which synchronizes files and therefore delete directories when they have been delated in the source. I got similar issue when using iTunes from MP3 database. I guess that the application try sometime to create directories when adding photo album to MP3 database. So basically a non reliable NAS is just useless. I found the WRT610N very attractive in terms of features, i.e. everything I need in single box but very disappointed of the various issue I had on the router regarding the DLNA issue, at least with the previous firmware.
Having the hard drive in FAT32 instead of NTFS is also not a good option. It took 8 hours to copy about 400 GB of data on my western digital 2.5" (500 GB drive) when the drive is format as NTFS and attached to my PC. When using FAT32 it took 5 to 5 days! FAT32 is very old and not reliable format (no journal file). NTFS is said as supported in other linksys product so I guess that it shoud be possible to have it on this prodcut. It sure that for a long time NTFS support on linux was not always easy for write access but I think that things have changed since that time. In case NTFS would not be possible they should provide other reliable and fast drive format such as Linux EXT2/EXT3 formant. However, I tried those format and it do not work. That is quite strange since this is a native linux format and the router is probably running on linux system.
For your information, I also had some disk corruption when I did some delation of files/directory with a FAT32 drive. It was less reccurent than NTFS but still not reliable. However I did not try the latest firmware with a FAT32 drive.
I will let you know when I will have feedback. If anybody has similar issue please just mention it here, at least we and linksys can be aware of the situation. Linksys should also take this opportunity to listen to their customers and enhance their product. I really believe that this product has been put on the market without the proper validation and I am suprise that it takes so many months to have updated firmwares.We can understand that bug could exist, but they should fixe it.
Similar Messages
-
WRT610N - NAS Visibility Issue
After upgrading the firmware on my WRT610N to 1.00.02 B10 , I was able to set up my Toshiba External USB HDD as NAS. I have a laptop running Vista 64 and a desktop running Vista 32. The desktop is directly connected to a router port. The laptop is wireless. In Vista / Network, I can see the drive from my laptop, but I cannot see it from my desktop. From the laptop, it is listed under the Computer category, Discovery Method is NetBIOS.
Any help would be appreciated.Try this -
Click Start, Click Network.You will be notified if file sharing is turned off. Click the message.Click Turn on network discovery and file sharing.Double-click WRT610N listed in the Computer category (do not double-click WRT610N listed in the Network Infrastructure category).If you do not see the WRT610N listed in the Computer category, then enter the default server name, WRT610N in the Search field, and press the Enter key.In the User name and Password fields, enter the default User name and password, admin.Click OK.To map the Default shared folder to your computer, right-click Default. Click Map Network Drive.Keep the default Drive letter, or select the letter you want to use from the Drive drop-down menu.On your desktop, double-click My Computer. The Default shared folder of your USB storage is listed under Network Location.To access your USB storage, double-click the Default shared folder. You can use the Default shared folder as another drive on your network.
However, after a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since your last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
To reset the router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Also make sure that your computer is set to obtain IP automatically, disable any firewalls, security softwares on the computer before trying to access the setup page...Remember to disconnect any Hard Drive connected to the router while resetting it...
Message Edited by castor on 06-16-2009 01:20 PM -
Chmod issues for deletion prevention
Hello all,
Been trying to lock down a folder on a remote machine so that it can only be read/write for all users, but deletion and renaming is forbidden aside from root user. To do this I have SSH into the machine and used the command "chmod 755 <name of folder>". Unfortunately this only works to stop deletion through the terminal but not for manipulation on the OS X Desktop GUI. It can still be moved to the trash and deleted thereafter.
Is there are workaround for this because the options given in the "get info" menu for files and folders is very limiting.
Regards
JamieThe best tip i can give you is to use the command: man chmod
and read headline "modes". Everything you can do with chmod is described in man pages for chmod -
Posting period issue while deleting a confirmation posted for a limit PO
Hi ..
I am facing an issue whiel deleting a confirmation posted for a limit PO.
Confirmation was posted for a limit PO in SRM and it created a service entry sheet in SAP. If I deleted that confirmation in the same posting period, then it is getting deleted. No issue here.
But if I deleted that confirmation in the next posting period then the reversal document is going to error in process. RZ20 is showing the error "Positng only possible in periods 2012/2 and 2012/3".
Posting date of reversal document is current date only and the backend posting period is 2012/3, but still it is failing with this posting period error.
If I tried to delete a confirmation posted for a normal PO then I could able to delete it even in next posting period by just changing the posting date.
Why this posting occurs while deleting the limit confirmation, even through the posting date is falls within the backenn posting periiod? Is it like, SAP system is trying to delete the service entry sheet in original posting period? Kindly help.
I am in SRM 5.0 (server 5.5) SP12.
Thanks,
ArunOK.
Well, if the variable is not used in any interval selection, then I would say "something happened to it".
I would make a copy of the query and run it to check if I get the same problem with period 12.
-> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
If so, then try removing the variable completely from the query and hardcode restriction to 12.
-> If problem still persists, I would have to do some thinking.
If problem is gone, then add the variable again. Check.
-> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
Good luck!
Jacob
P.S: what fisc year variant are you using?
Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM -
Jabber for IPad Directory Issue
Guys,
I'm been beating my head against this issue for the last couple of days and I think a new idea would be extremely helpful!
Problem: No Corporate Directory being shown at all.
Jabber for IPad client Version 9.1
CUCM 8.5
CUP 8.6(3)
Microsoft AD Environment
Every single other client I have can access the corp directory (Android, Windows, CUPC) and I'm getting Presence and Contact list on the jabber for ipad client. Can anyone maybe post a screenshot of the product specific device fields or offer a sugestion? I've followed the Admin guide, but have obviously missed something :/
GarethHi Gareth,
I noticed this too. It depends on where you are searching from within the client.
If you are logged into the Presence Client - then your search is from the ldap profile assigned on CUPS to the end user.
If you are searching from within the CUCM portion of the client it uses the product specific section of the TABXXX client on CUCM
LDAP Server FQDN.domain:389
LDAP Username i have used the same one as for my LDAP directory Distinguisged Name\domain(without the ".local")
LDAP Search base DC=xxxx,DC=local
LDAP field Mappings mainPhoneNumber=ipPhone
we also have in the
"reserved" field the domain domain=xxxx.local
hope this helps
cheers
Stuart -
Having issue with PDEContentRemoveElem() for deleting PDEElements
Hi,
I am facing some problem in my code for deleting the PDEElements from the input pdf file. I used the
method PDEContentRemoveElem() and still I am seeing no elements are getting deleted from the pdf
file. I gave the full code I have written for the element deletion. Please point me if there is something
wrong in my code.. Many thanks for you for going through my code...
void DeleteElement(PDEElement pdeElement)
PDEContent content = PDEContainerGetContent(reinterpret_cast<PDEContainer>(pdeElement));
ASInt32 numElem = PDEContentGetNumElems(content);
for (ASInt32 i = 0; i < numElem; i++)
PDEElement element = PDEContentGetElem(content, i);
if (PDEObjectGetType ((PDEObject)pdeElement) == kPDEContainer)
DeleteElement (element);
else
PDEContentRemoveElem(content,i);
void MAINFuntionForElementDeletion ()
ASPathName aoPDFPathName = NULL;
ASText pathText = ASTextNew();
ASFileSys fileSys = NULL;
pathText = ASTextFromScriptText("E:\\Temp\\INPUT.pdf", kASRomanScript);
fileSys = ASGetDefaultFileSysForPath(ASAtomFromString("ASTextPath"), pathText);
aoPDFPathName = ASFileSysCreatePathName (fileSys, ASAtomFromString("ASTextPath"), pathText, 0);
AVDoc avDoc = AVDocOpenFromFile(aoPDFPathName,fileSys,pathText);
DURING
if(avDoc!=NULL)
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
ASInt32 j, numElems;
int numPages = PDDocGetNumPages (pdDoc);
PDEContent aoPDEContent = NULL;
PDPage aoPage = NULL;
PDEElement pdeElement;
aoPage = PDDocAcquirePage(pdDoc, 0);
aoPDEContent = PDPageAcquirePDEContent(aoPage, 0);
numElems = PDEContentGetNumElems(aoPDEContent);
for (j = 0; j < numElems; j++)
pdeElement = PDEContentGetElem(aoPDEContent, j);
if (PDEObjectGetType ((PDEObject)pdeElement) == kPDEContainer)
DeleteElement(pdeElement);
else
PDEContentRemoveElem(aoPDEContent,j);
// Commit the changes to the PDEContent.
PDPageSetPDEContent(aoPage, gExtensionID);
PDPageReleasePDEContent(aoPage, 0);
HANDLER
// some code for logging
END_HANDLERAlways delete objects in reverse iteration. Standard programming
practice. -
Is it possible to change warning "& is marked for deletion" to a hard error
As part of our periodic update of our bank directory in transaction BAUP, Bank Keys which are no longer valid are marked for deletion. We are not at the point where we are archiving records yet, so the actual deletion has not occurred in our system.
When an HR user updates a person's bank information (transaction PA20 or PA30, InfoType 09), if they enter one of these bank keys, they are given a warning that the bank key is marked for deletion. However, this is not a hard stop, only a warning message. As a result, they are able to save the record with an invalid bank key. The details indicate that this is message class F4, message 230. However, it appears from the IMG that it may be message 210. I have tried working with each of them.
I have attempted to change the message to a hard error in message control, but have not been able to do so. I receive an error telling me that "Message 230 (or 210) is not allowed". I have tried several application areas, including FV, Electronic Banking Messages.
Is there any way in configuration to change this to a hard error? If so, please supply details, including application area.
Also, are there risks of disruption of standard business processes if we do change this to a hard error? I know that this same message is issued for other master data elements which are marked for deletion such as GL accounts or Customer records,
Thank you.
I have searched forums with terms "marked for deletion" and "warning" but have not found an answer. I have also searched various outside expert forums on this topic. Everything I have seen seems to assume that this message will be a warning only.
Aoife B.
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PMIf particular message is not allowed in OBA5, then it is not configurable message. Neverthless if you like to change this message, you need to configure this in OBMSG first
-
Data pump issue for oracle 10G in window2003
Hi Experts,
I try to run data pump in oracle 10G in window 2003 server.
I got a error as
D:\>cd D:\oracle\product\10.2.0\SALE\BIN
D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du
mpdir dumpfile=expdp_sale_20090302.dmp logfile=exp_sale_20090302.log
Export: Release 10.2.0.4.0 - Production on Tuesday, 03 March, 2009 8:05:50
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31650: timeout waiting for master process response
However, I can run exp codes and works well.
What is wrong for my data pump?
Thanks
JIMHi Anand,
I did not see any error log at that time. Actually, it did not work any more. I will test it again based on your emial after exp done.
Based on new testing, I got below errors as
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31671: Worker process DW01 had an unhandled exception.
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06512: at "SYS.KUPC$QUEUE_INT", line 277
ORA-06512: at "SYS.KUPW$WORKER", line 1366
ORA-04030: out of process memory when trying to allocate 65036 bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being called: "SYS.KUPC$_WORKERERROR"
ORA-06512: at "SYS.KUPW$WORKER", line 13360
ORA-06512: at "SYS.KUPW$WORKER", line 15039
ORA-06512: at "SYS.KUPW$WORKER", line 6372
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"SALE"."SQLSCRIPT_2478179"]
ORA-06512: at "SYS.KUPW$WORKER", line 7078
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06500: PL/SQL: storage error
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucpcon: tds)
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucalm coll)
Job "SYSTEM"."SYS_EXPORT_FULL_01" stopped due to fatal error at 14:41:36
ORA-39014: One or more workers have prematurely exited.
the trace file as
*** 2009-03-03 14:20:41.500
*** ACTION NAME:() 2009-03-03 14:20:41.328
*** MODULE NAME:(oradim.exe) 2009-03-03 14:20:41.328
*** SERVICE NAME:() 2009-03-03 14:20:41.328
*** SESSION ID:(159.1) 2009-03-03 14:20:41.328
Successfully allocated 7 recovery slaves
Using 157 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 12911, block 2, scn 7355467494724
cache-low rba: logseq 12911, block 251154
on-disk rba: logseq 12912, block 221351, scn 7355467496281
start recovery at logseq 12911, block 251154, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 185319Kb in 1.73s => 104.61 Mb/sec
Total physical reads: 189333Kb
Longest record: 5Kb, moves: 0/448987 (0%)
Change moves: 1378/5737 (24%), moved: 0Mb
Longest LWN: 1032Kb, moves: 45/269 (16%), moved: 41Mb
Last redo scn: 0x06b0.9406fb58 (7355467496280)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 847056/876618 = 1.0
*** 2009-03-03 14:20:46.062
KCRA: start recovery claims for 35384 data blocks
*** 2009-03-03 14:21:02.171
KCRA: blocks processed = 35384/35384, claimed = 35384, eliminated = 0
*** 2009-03-03 14:21:02.531
Recovery of Online Redo Log: Thread 1 Group 2 Seq 12911 Reading mem 0
*** 2009-03-03 14:21:04.718
Recovery of Online Redo Log: Thread 1 Group 1 Seq 12912 Reading mem 0
*** 2009-03-03 14:21:16.296
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 849220/841000 = 1.0
*** 2009-03-03 14:21:28.468
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
*** 2009-03-03 14:26:25.781
kwqmnich: current time:: 14: 26: 25
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
ktsmgtur(): TUR was not tuned for 360 secs
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:7447M/8185M, Ph+PgF:6833M/9984M, VA:385M/3071M
Instance name: vmsdbsea
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2460, image: ORACLE.EXE (SHAD)
Dynamic strand is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
*** 2009-03-03 08:06:51.921
*** ACTION NAME:() 2009-03-03 08:06:51.905
*** MODULE NAME:(expdp.exe) 2009-03-03 08:06:51.905
*** SERVICE NAME:(xxxxxxxxxx) 2009-03-03 08:06:51.905
*** SESSION ID:(118.53238) 2009-03-03 08:06:51.905
SHDW: Failure to establish initial communication with MCP
SHDW: Deleting Data Pump job infrastructure
is it a system memory issue for data pump? my exp works well
How to fix this issue?
JIM
Edited by: user589812 on Mar 3, 2009 5:07 PM
Edited by: user589812 on Mar 3, 2009 5:22 PM -
How to reset OpenLDAP service that was marked for deletion
Hi,
I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' to 'Automatic' or 'Manual', I am getting an error 'The specified service has been marked for deletion'. If I tried to stop the service, the service is vanishing from services list. I am consistently facing this issue even if I tried to reinstall all the modules. Can any one tell me how can I resolve this issue?
Thanks in advance,
ChanduHi,
I take it that after it has been marked for deletion and you reboot then the service is removed?
I am not sure what version you are on but for 9.3.1 to create the OpenLdap service again,
open a cmd prompt to directory
*\Hyperion\SharedServices\9.3.1\openLDAP*
and type :-
slapd.exe install OpenLDAP-slapd "Hyperion S9 OpenLDAP"
Cheers
John
http://john-goodwin.blogspot.com/ -
Item Conversion Template Issue for Oracle Migration - Copy functionality
Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PMIssue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi -
Performance Issue for BI system
Hello,
We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
The Main problem is while running a report or creating a query is taking way too long time.
Kindly help me.Hello SIva,
Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
No one is using the system currently but in ST02 i can see the swaps are in red.
Buffer HitRatio % Alloc. KB Freesp. KB % Free Sp. Dir. Size FreeDirEnt % Free Dir Swaps DB Accs
Nametab (NTAB) 0
Table definition 99,60 6.798 20.000 29.532 153.221
Field definition 99,82 31.562 784 2,61 20.000 6.222 31,11 17.246 41.248
Short NTAB 99,94 3.625 2.446 81,53 5.000 2.801 56,02 0 2.254
Initial records 73,95 6.625 998 16,63 5.000 690 13,80 40.069 49.528
0
boldprogram 97,66 300.000 1.074 0,38 75.000 67.177 89,57 219.665 725.703bold
CUA 99,75 3.000 875 36,29 1.500 1.401 93,40 55.277 2.497
Screen 99,80 4.297 1.365 33,35 2.000 1.811 90,55 119 3.214
Calendar 100,00 488 361 75,52 200 42 21,00 0 158
OTR 100,00 4.096 3.313 100,00 2.000 2.000 100,00 0
0
Tables 0
Generic Key 99,17 29.297 1.450 5,23 5.000 350 7,00 2.219 3.085.633
Single record 99,43 10.000 1.907 19,41 500 344 68,80 39 467.978
0
Export/import 82,75 4.096 43 1,30 2.000 662 33,10 137.208
Exp./ Imp. SHM 89,83 4.096 438 13,22 2.000 1.482 74,10 0
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 2,22 5.832 22.856 131.072 131.072 IDs 96,61
Page area 1,08 2.832 24.144 65.536 196.608 Statement 79,00
Extended memory 22,90 958.464 1.929.216 4.186.112 0 0,00
Heap memory 0 0 1.473.767 0 0,00
Call Stati HitRatio % ABAP/4 Req ABAP Fails DBTotCalls AvTime[ms] DBRowsAff.
Select single 88,59 63.073.369 5.817.659 4.322.263 0 57.255.710
Select 72,68 284.080.387 0 13.718.442 0 32.199.124
Insert 0,00 151.955 5.458 166.159 0 323.725
Update 0,00 378.161 97.884 395.814 0 486.880
Delete 0,00 389.398 332.619 415.562 0 244.495
Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM -
Transformation Issue for 2LIS_03_BF
Dear All.
I am facing very strange issue for 0IC_C03 with the transformation of 2LiS_03_BF the cube was first got loaded from our Sandbox and every thing was fine, latter we connect BW development with R/3 development.
i have transfer all the data source for MM Inventory and try to create the transformation for 2LiS_03_BF for the infosource 2LIS_03_BF_TR but it did not map any field, but with the sand box client with the same data source it mapped all the fields.
Also when i try to load the 2lis_03_bf it make all the key field values to 0 even the process key is determined correctly in the R/3 side and Industry determination is alo set and also in BF10 BW is selected.
i try to debug the update rule and found that the process key and the value is updated correctly in the routine but after that there is an exception coming CX_RSROUT_SKIP_VAL.
please help....Yes reinstalling the business contents solve the problem and it come up with all the mappings but the strange problem is that all of my key figures after loading showing '0' value.
i try to simulate the DTP by applying a break point on one routine and during the debugging it is filling the correct values and after some steps its throwing a CX_RSROUT_SKIP_VAL exception which might deleting the target value.
i am totally lost that why this exception is coming as before it never comes it only comes when we connect the development system and try to load the cube from there.
in between can you please help me out for getting rid of this exception.
thanks & best regards, -
Cisco Jabber for Mac - Directory Lookup and Contact Fields
Hello,
After having issues myself with Cisco Jabber for Mac 9.2 specifically with Active Directory lookups not working, or contact information not populating (and therefore not being able to call users from the contact list as no telephone information exists) I am including a sample jabber-config.xml file that works for me.
Please note: there are many different ways to configure this. What I will be showing is the method that works for me and my deployment, which is pretty standard.
As always and as a disclaimer, once again, this is what has worked for my deployment scenario. Always keep backups of your configuration files, and always be mindful of anything you have configured already, especially in the jabber-config.xml file.
Background
My deployment is based on CUCM 9, with 1 publisher and 2 subscribers. I also have a CUCM IM & Presence 9.0 server. This assumes that you have already configured your deployment and Jabber is functioning already, albeit with the aforementioned issues.
As for Active Directory, my deployment will be based on Windows 2008 R2 Domain Controllers running in native 2008 mode. For this example, we will be searching directly against one of the DCs with a Global Catalogue role. Please be aware that in large deployments you will have to plan accordingly with regards to lookup traffic from Jabber clients to the DCs.
Also, as of Cisco Jabber for Mac 9, the client no longer can search via the CUCM internal directory (which may be made of local end users, Active Directory synced users, or a mix of both) and this must be done via a LDAP mechanism.
Scenario
In this deployment scenario, Cisco Jabber for Windows is working properly - you can search and add people from Active Directory, and contacts in your contact list have all the appropriate fields populated from Active Directory. However, when trying the same with Jabber for Mac, Jabber for iPhone or Jabber for iPad you notice that you cannot perform a directory lookup, and if you add people directly (for example, [email protected]) the user only has the IM field populated. No telephone, email or additional information is displayed.
Solution
Whereas Cisco Jabber for Windows uses the EDI mechanism (native Windows), whereby when running from a computer that is on the domain (or in the event that you are search for contacts in another Active Directory domain where a domain trust exists) , Jabber for Mac / iPhone / iPad uses the BDI mechanism.
In this case, you will need to provision a jabber-config.xml file that you will upload to your TFTP server (or Publisher) that will be "downloaded" by your Jabber for Mac client and also used by the iPhone and iPad client. You can configure many options in the jabber-config.xml file, but for this example we will place just the information that we need to order for these clients to request and display Active Directory information.
Please note that the configuration may vary depending on your deployment, but at the very least we will be:
- Configuring a DC where we will perform the lookup.
- Configure credentials that will be used to perform the lookup. This will be an Active Directory account that has read rights on the Active Directory domain. Please note that these credentials are saved in plain text in the file, so ensure that the account that you will be using is not privileged.
- Configure the server port that we will be using to perform the lookup.
- Configure the Search Base. This is basically where we want the directory lookup to happen. You can either choose for this lookup to start at the "base" of the domain (and therefore the search will iterate through all the user accounts and and OUs below the root base) or define a specific OU where you want to search.
Caution!
- There is a current limitation with Cisco Jabber for Mac whereby you can only have 1 search base configured. Please keep this in mind if, like me, you have multiple OUs (like an OU for each company in your organization) and under these OUs you have sub OUs as a user account container.
- If using the top level search base, unless you specify a filter, you will potentially be able to search for all user accounts in the domain. You will need to configure the <BDIBaseFilter> parameter if you want to fine tune your search ability.
Steps
These are the steps I have followed. Other steps or considerations may vary.
- Log in to your TFTP server and download the jabber-config.xml file and keep it as a backup. If you are already using the jabber-config.xml file for other purposes, do not worry - you can add your BDI information parameters inside.
- Remove the jabber-config.xml file
- Edit the jabber-config.xml file and configure thus:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>DOMAIN CONTROLLER IP ADDRESS</BDIPrimaryServerName>
<BDIPresenceDomain>YOUR PRESENCE DOMAIN</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1>YOUR SEARCH BASE</BDISearchBase1>
<BDIConnectionUsername>[email protected]</BDIConnectionUsername>
<BDIConnectionPassword>PASSWORD</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
</Directory>
</config>
For example, let´s assume the following:
- Domain controller IP address is 10.1.1.2 .
- Your presence domain is test.local .
- Your search base will be test.local using the top level of the domain.
- Your username with which you will be doing your searches is called walt . Usually you can either identify walt as test.local\walt or [email protected] . It is always best, in these sort of scenarios, to use the UPN convention so we will be configuring a [email protected] .
- The password is the Active Directory password for the account walt .
- I have disabled TLS in my case. There are issues with the Jabber for Mac client when using other security methods.
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>10.1.1.2</BDIPrimaryServerName>
<BDIPresenceDomain>test.local</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1>DC=test,DC=local</BDISearchBase1>
<BDIConnectionUsername>[email protected]</BDIConnectionUsername>
<BDIConnectionPassword>walt01!</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
</Directory>
</config>
One you have configured the jabber-config.xml file, you will now need to upload it to you TFTP server. Once uploaded, you will need to restart the Cisco TFTP service. Again, my TFTP server is on my CUCM publisher, so:
- I go to Cisco Unified OS Administration on my Publisher server, TFTP File Management and I upload jabber-config.xml to / directory
- I then go to Cisco Unified Serviceability on my Publisher server, I locate the Cisco TFTP service and I restart the service
Once this is done, you can figure up your Jabber for Mac client. As a test, on your Mac (using Terminal) go to:
/Users/username/Library/Application Support/Cisco/Unified Communications/Jabber/Config
In here you will see several files, but what we want to see is jabber-config.xml . As soon as you start the Jabber for Mac client and log in, the jabber-config.xml file will download from your TFTP server and get saved here. When you see it appear, just type in your terminal window more jabber-config.xml and make sure that the output is the same as the xml file you created.
From there, try doing directory search. If you have previously added contacts and they still lack attribute information, you will need to remove them (sometimes it will not refresh properly) and add them again from the directory.
I will be updating this guide and ammending anything that is incorrect, but this is meant to be a quick checklist and steps to get this, at least in the most very basic version, up and running for Jabber for Mac.Hello,
Thanks for this post! It works, I can do lookup and also I can add found contact to contact list and get information about contact from LDAP.
One more question: - I can't get all information about contact. I don't get e.c mobile phone number and more others attributes. I have tried to expand your file as follows:
<?xml version="1.0" encoding="UTF-8"?>
<config version="1.0">
<Directory>
<DirectoryServerType>BDI</DirectoryServerType>
<BDILDAPServerType>AD</BDILDAPServerType>
<BDIPrimaryServerName>IP of AD</BDIPrimaryServerName>
<BDIPresenceDomain>Presence Domain</BDIPresenceDomain>
<BDIServerPort1>3268</BDIServerPort1>
<BDISearchBase1> Search Base</BDISearchBase1>
<BDIConnectionUsername>User</BDIConnectionUsername>
<BDIConnectionPassword>Password</BDIConnectionPassword>
<BDIEnableTLS>0</BDIEnableTLS>
<BDISipUri>msRTCSIP-PrimaryUserAddress</BDISipUri>
<BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
<BDIBusinessPhone>telephoneNumber</BDIBusinessPhone>
<BDIMobilePhone>mobile</BDIMobilePhone>
<BDIHomePhone>homePhone</BDIHomePhone>
<BDIOtherPhone>otherTelephone</BDIOtherPhone>
<BDITitle>title</BDITitle>
<BDICompanyName>company</BDICompanyName>
<BDILocation>co</BDILocation>
<BDIPostalCode>postalCode</BDIPostalCode>
<BDICity>l</BDICity>
<BDIState>st</BDIState>
<BDIStreetAddress>streetAddress</BDIStreetAddress>
</Directory>
</config>
But it didn't help.
When I capture lookup via Wireshark, I can see that Jabbers sends search request with bunch of attributes, but from LDAP answer contains only 8 attributes. (see attached screenshots) -
Issue in deleting an app installed in IOS 7
I'm facing issue in deleting an app which was installed in IOS 7 in both iPhone & iPad. Installed the app from the hosted server, Installation is complete. But the app remain in the grayed out state.
When I try to delete the app, it is not getting deleted. Please find the attached screenshot for reference. The device console log is as shown below during Installation.
Oct 2 15:57:55 121945s-iPad itunesstored[101] <Warning>: LaunchServices: Creating installProgressForApplication:LSApplicationProxy: KBLD83422Q.V-Spec (Placeholder) withPhase:0
Oct 2 15:58:26 121945s-iPad SpringBoard[33] <Warning>: Killing KBLD83422Q.V-Spec for app installation
Oct 2 15:58:26 121945s-iPad itunesstored[101] <Warning>: LaunchServices: installing app for existing placeholder LSApplicationProxy: KBLD83422Q.V-Spec (Placeholder)
Oct 2 15:58:26 121945s-iPad itunesstored[101] <Warning>: LaunchServices: Creating installProgressForApplication:LSApplicationProxy: KBLD83422Q.V-Spec (Placeholder) withPhase:1
Oct 2 15:58:26 121945s-iPad lsd[71] <Warning>: LaunchServices: Updating installPhase for parent <NSProgress: phase=Loading; state=Active; fractionCompleted=0.590000> to 1
Oct 2 15:58:26 121945s-iPad installd[59] <Notice>: 0x1c1000 handle_install_for_ls: Install of "/var/mobile/Media/Downloads/1678854020200631213/4200727509532306323" requested by itunesstored
Oct 2 15:58:33 121945s-iPad installd[59] <Notice>: 0x1c1000 MobileInstallationInstall_Server: Installing app com.toyota.vSpec
Oct 2 15:58:36 121945s-iPad securityd[87] <Error>: OCSPResponse: now > latestNextUpdate
Oct 2 15:58:36 121945s-iPad SpringBoard[33] <Warning>: Killing com.toyota.vSpec for termination assertion
Oct 2 15:58:36 121945s-iPad installd[59] <Notice>: 0x1c1000 MobileInstallationInstall_Server: Staging: 7.61s; Waiting: 0.00s; Installation: 2.80s; LS Sync: 0.00s; Overall: 10.42s
Oct 2 15:58:36 121945s-iPad lsd[71] <Warning>: LaunchServices: Updating identifier store
Oct 2 15:58:36 121945s-iPad itunesstored[101] <Warning>: LaunchServices: installPhaseFinishedForProgress: KBLD83422Q.V-Spec.Installing - <NSProgress: phase=Installing; state=Finished; fractionCompleted=1.000000> called, removing progress from cache
Oct 2 15:58:36 121945s-iPad lsd[71] <Warning>: LaunchServices: installation ended for app KBLD83422Q.V-Spec
Oct 2 15:58:37 121945s-iPad SpringBoard[33] <Error>: libMobileGestalt MobileGestalt.c:837: front-facing-camera cannot generate notifications yet
Oct 2 15:58:37 121945s-iPad SpringBoard[33] <Error>: libMobileGestalt MobileGestalt.c:835: ipad is static and will never generate a notification
Oct 2 15:58:37 121945s-iPad SpringBoard[33] <Error>: libMobileGestalt MobileGestalt.c:835: any-telephony is static and will never generate a notification
Oct 2 15:58:37 121945s-iPad SpringBoard[33] <Error>: libMobileGestalt MobileGestalt.c:835: stand-alone-contacts is static and will never generate a notification
Oct 2 15:58:37 121945s-iPad SpringBoard[33] <Error>: libMobileGestalt MobileGestalt.c:835: still-camera is static and will never generate a notification
Oct 2 15:58:37 121945s-iPad itunesstored[101] <Warning>: LaunchServices: installPhaseFinishedForProgress: KBLD83422Q.V-Spec.Loading - <NSProgress: phase=Loading; state=Finished; fractionCompleted=1.000000> called, removing progress from cache
Oct 2 15:58:37 121945s-iPad lsd[71] <Warning>: LSInstallProgress: In observeValueForKeyPath:userInfo.installState could not find parent progress for KBLD83422Q.V-Spec, it may have been removed
The app is downloaded from internally hosted server.I also have this problem with ios app and have reproduced the problem on multiple devices. It only happens when i use OTA installation process with exported ipa. I am following the apple docs for ios distribution for testing. I am not using a 3rd party (testflight, betatesters etc.) for this, its an internet facing web server (azure) with all the proper mime types etc. setup. The install works fine, meaning i get the correct prompts to install, my app installs and runs, but I end up with an additional phantom icon, usually hung in an "installing" state, basically like prabu4u shows in his scenario.This icon/app can't be deleted using standard means (via xcode, itunes, hard/soft resetting of device, changing device language settings).
here is a brief section of console log, that is similar to prabu4u:
.....prior consiole messages omitted for brevity sake.....
Oct 12 13:02:55 Bob-Bisantzs-iPhone lsd[76] <Warning>: LaunchServices: Updating identifier store
Oct 12 13:02:55 Bob-Bisantzs-iPhone itunesstored[95] <Warning>: LaunchServices: installPhaseFinishedForProgress: com.lynn.Installing - <NSProgress: phase=Installing; state=Finished; fractionCompleted=1.000000> called, removing progress from cache
Oct 12 13:02:55 Bob-Bisantzs-iPhone lsd[76] <Warning>: LaunchServices: installation ended for app com.lynn
Oct 12 13:02:55 Bob-Bisantzs-iPhone lsd[76] <Warning>: LSInstallProgress: In observeValueForKeyPath:userInfo.installState could not find parent progress for com.lynn, it may have been removed
Oct 12 13:02:55 Bob-Bisantzs-iPhone lsd[76] <Warning>: LSInstallProgress: In observeValueForKeyPath:fractionCompleted could not find parent progress for com.lynn, it may have been removed
Oct 12 13:02:55 Bob-Bisantzs-iPhone itunesstored[95] <Warning>: LaunchServices: installPhaseFinishedForProgress: com.lynn.Loading - <NSProgress: phase=Loading; state=Finished; fractionCompleted=1.000000> called, removing progress from cache
Oct 12 13:02:55 Bob-Bisantzs-iPhone lsd[76] <Warning>: LSInstallProgress: In observeValueForKeyPath:userInfo.installState could not find parent progress for com.lynn, it may have been removed
I do not believe this is a network, connectivity or web server issue. The udid of my device (and other test devices) are registered in the protal, they are all running updated version of ios7.
I believe its an issue (caused by me) with the provision profile (probably the distribution) packaged in the app. I have validated that the profiles are in the portal and are synched with xcode5 using organizer->devices->iphone->provisioning profies. it shows both the ios team prov profile and the ios adhoc distribution profile created from my developer account.They both show valid profile status with expirations in 2014.
I have done clean builds, rebuilds and redeploys of the exported ipa (generated using ad-hoc deployment scheme in xcode5), but the end result is the same. I always end up with the phantom icon.
I have read other posts that say they use a 3rd party tool to delete the icon, which is fine, but I really want to avoid this by correctly developing and depploying the app.
any ideas on where i made my mistake(s) ? thanks, bob -
T-code for delete file from application server
Hi all!
Please, has any t-code for delete file from application server? For upload exist CG3Z, for download has CG3Y. And for delete? Has anyone?
I need to delete file from application server in QA system and i don't want to create a program for this because i will need to transport a request from DEV to QA.I don't have contact with basis team.
The FM EPS_DELETE_FILE support directory name with max 60 char. My dir. has more than that. I need a transaction for this.
Anybody know if this transaction exist?
Maybe you are looking for
-
Open qty errin Selection list For Ref Doc. screen while converting to order
Hi SAP Gurus, For one of my materials, the open quantity is not updating in the Selection list For Ref Doc. screen while converting to sales order. Can you please help me? Thanks, Ketan
-
Dont allow to change item level data in sales order.
Hi all, I have a requirement in which, users should not be allowed to change item level data or not allowed to add any new items in sales order on a certain condition. But they should be allowed to change the header level data. How can i achieve thi
-
Missing Parts check one level....can you confirm
Simple scenario. I have a 3 level BOM. Top level Item Mat A (make to order 82) > Mat X (make to stock strategy 40) > Component 1 (purchased). Stock: There is only stock for the Component 1 When I create an order for Mat A I get a missing part for Ma
-
Lumia 800 - How do I turn off the annoying tone th...
I have played around with settings in "ringtones and sounds" but can't turn it off... my colleagues are getting annoyed now! Solved! Go to Solution.
-
Error when selecting detailed navigation menu item
Hi, Usually on selection of a menu item from detailed navigation an iview appears which contains values from an R/3 system, but now when i select any item for the detailed navigation i get a download pop up window which ask me to save the page. When