WRT610N - Need to Set Static IP for Server and Port Forwarding
Does anyone know how I can assign a static IP for my Home Media Server in the WRT610N router? I need to do this because of the settings I need to set for the server in the Single Port Forwarding.
Thanks in advance!
Never mind. I got it.
Similar Messages
-
Trouble with setting Static IP in order to port forward thru 2 routers
I currently have cable internet connected to one router (Linksys E2000 w/ firmware v1.0.03). That router is connected to another router, a Linksys E3200 w/ firmware v1.0.02. In order to properly forward ports through the E3200, I understand that I need to set up a static IP on that router.
I've basically followed the steps outlined in this video, but when I enter all the IP addresses for Static IP settings, it won't allow me to access the router's setup page. I try entering the new IP that I've given it (which it tries to direct itself to automatically after I save the settings) and the connection times out. I am able to access the internet otherwise, however. From here I'm forced to do a factory reset on the router and start from square one.
Anybody have any ideas? I'm getting pretty frustrated and would love to get the ports forwarded so I can get my server properly set up.
Solved!
Go to Solution.I apologize, I should have been more specific. I have an ethernet cable connected from a standard port on the E2000 to a standard port on the E3200, which gives it internet access. On a hunch, last night I tried switching the cable to the Internet port on the E3200, but that gave no internet access.
The two routers are chained because I'm living in a friend's house and he has his own router (the E2000) set up with his own devices. Thus, I have 3 devices of my own connected to the E3200, including a Synology DiskStation NAS, which I would like to forward some ports to. I don't need two LAN subnets-- honestly whatever it takes to forward the ports through the two routers to my NAS would be enough for me. -
Need to set static IP for iMac
I have a fairly elaborate home network. I want my iMac to always use the same IP address when it connects because I use it for web development and need it to consistently identify itself on the network. At the same time I need DHCP on for some other devices which connect wirelessly to ask for an IP. I've limited my DHCP server to about 50 addresses from 192.168.1.100 to 192.168.1.150 so there is plenty of room outside that range for me to choose a single IP for this iMac.
The problem is that when I open the Network control panel and choose "Using DHCP with manual address" and enter something like 192.168.1.2 then the iMac forgets its DNS Server, Search Domains, and router and I can't seem to get any DNS on the machine. I can ping the iMac from my other computer and I can ping my local LAN machines from the iMac but from the iMac I cannot ping any domain names like yahoo.com nor can I ping any IP outside my LAN such as 60.180.206.184).
If anyone can explain to me how to set this up, I would greatly appreciate it.Set your Mac to completely manual configuration and type in the desired IP, subnet mask, router and DNS and you're ready to go. You can also use DHCP with manual address, but in this case most routers won't tell your Mac the correct DNS server, so I'd recommend to set all settings manually.
Björn -
Need to set default values for the fields plant and location in ME21N
Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advancehi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam -
After an update to firefox I keep getting a warning from my Firewall (McAfee) "Program wants internet access". I have permission set at outgoing for firefox and updates checking off, to check that request is valid so what does it need access for
This was not a Firefox update, but a piece of malicious software you have inadvertently downloaded from a site called http://ffftp.co.cc/ which is impersonating Firefox. I discovered this as soon as my Zonealarm requested permission for "Golds" to access the internet. Golds??!! However I couldn't find a file with this name installed on my computer.
You should delete the file you downloaded and certainly do not allow internet access to any suspicious program. If you have already given permission, scan your PC immediately for any virus, malware, etc. Best of luck. -
How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks
How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks
You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.
-
I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?
To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle. -
Do we need to create message interfaces for idocs and rfcs thatare imported
do we need to create message interfaces for idocs and rfcs thatare imported
from sap server
in scenarios from sap system to file or vice versa
i knew that we need not create message types
do we also skip creating message interfaceshi,
you create an abstract message interface for IDOC only if you want to use
them in a BPM (integration process)
for more about IDOCs have a look at my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.
I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014 -
I purchased an IPad Mini for my mother-in-law. I used my Apple account since she didn't have one. I need to open an account for her and change the account on the IPad Mini from mine to hers. Can anyone point me in the right direction to get this done? Thanks.
Best way
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661http://support.apple.com/kb/HT5661
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_UShttp://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311http://support.apple.com/kb/ht1311
How to Delete an Apple ID
http://www.wikihow.com/Delete-an-Apple-IDhttp://www.wikihow.com/Delete-an-Apple-ID
Apple ID Support - Manage Account
https://www.apple.com/support/appleid/manage/https://www.apple.com/support/appleid/manage/
Create an Apple ID
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleIdForIK B?localang=en_US&path=
Cheers, Tom -
Dear All
for printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?What Windows OS are you using? Are you networked?
If you are networked, you have to setup your file and print sharing options in order to require password assess. If you are just trying to control specific files from being printed, you can do that, too.
If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access.
Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
If I have been helpful, a Kudo is always appreciated. -
What if i should update to ios 7 coz i read on paper yesterday that you should wait coz you need to be in queue for download and there could be bug so that they can be resolved?
do whatever you'd like to do. No one's forcing you to update.
-
How to set userlevel permission for GFS and NFS
hi
how to set userlevel permission for GFS and NFS?
regardshi
http://www.redhat.com/docs/manuals/enterprise/
AND
http://en.tldp.org/
probably your best bet.
regards -
I gave my iphone for servis and the sailman return to me another one that has been used, without giving more details, telling me that this is the way apple does business. IS THAT TRUE?
A refurbished until should appear identical to a new unit...you should not be able to tell the difference. If your unit is truly "used"...scratches, signs of use, etc., then Apple's warranty terms were not followed.
All refurbished units receive new cases & batteries, at a minimum...that's why you can't tell the difference. -
If purchase iWork for mini mac do i need to purchase iWork again for iPad and iphonee
if purchase iWork for mini mac do i need to purchase iWork again for iPad and iphonee
Yes. Mac mini runs OS X, iPad and iPhone run iOS - different operating systems
that require different versions of Pages, Numbers, & Keynote to run. Like
the iOS version, once you purchase the version for your Mac mini, you may install
it on as many OS X desktops/laptops/minis that you own.
Maybe you are looking for
-
Syncing Problem - Playlist no longer exists!!!
Hope someone can help me... My ipod mini was full so i set about deleting albums, it then should have had enough space to update but it still wouldn't work. iTunes then automatically created a playlist called 'selected tunes' (i think) which i delete
-
As the title indicates, I'm having this error during installation. It occurs when I try to install the "Management Studio" part of the program. I've tried a bunch of things like copying to hard drive and installing, but to no avail. To isolate the pr
-
Does aanyone know if one can connect a B&W G3 to a Cinema Display? I will also be using a powerbook G4.
-
I originally thought this could be achieved using "OSVersion" or "OSCurrentVersion" but (unless I'm mistaken) those variables are in fact tied to the OS from witch you actually launch the MDT Wizard right? i.e. say I run MDT from within Windows PE to
-
Finder crashes (repeatedly)
I upgraded to 10.5.1 this morning and since the following restart, finder crashes every time it's trying to start. The shiny "application running mark" under Finder's icon in the dock lights up for about half a second and then goes off again for abou