WRT610N New Firmware Upgrade and USB Hard disk not working

Hi, I've just upgraded the new firmware, everything seems fine but now my USB Hard disk is not recognizable unless i restart the router. I have a Seagate FreeAgent 500Gigs, and it worked perfectly with the previous firmware. Just wondering if its just me or anyone else has the same problem.
Thanks
I forgot to add that afterawhile the hard disk isnt recognizable again and i have to reset it to get it working
Message Edited by jellydish on 02-13-2009 06:09 AM

The same thing is happening to me... After the HDD goes to sleep, when you goto access it again you can hear it spin up but you still can't access it at all.

Similar Messages

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

My Macbook Pro keyboard AND USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?

My Macbook Pro keyboard and USB keyboard will not work. However, the trackpad and USB mouse will work. Any help?
This is quite frustrating, since it randomly occured as I was browsing the web. It seemed to happen out of nowhere. I cannot login to my user account because I cannot type my password.
Any help will be appreciated.
-Matt

If you have another Mac, boot the non-working one into Target Disk Mode (holding down "T" at startup). Hook up the two Macs via a Firewire cable. The non-working one will mount on the other Mac as an external Firewire HD.
Next, download the 10.5.6 Combo update from here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html
Run it. When it asks you for a destination, choose the other Mac that was mounted via Firewire. When it's done, unmount the computer and restart it. The keyboard and mouse should work now.

HT5654 i updated my ipad 3 to latest version of system upgrade and now it is not working at all. it just shows an itunes logo. I have tried restarting.

i updated my ipad 3 to latest version of system upgrade and now it is not working. All black screen with Itunes logo. I tried restarting

Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
$19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

I keep upgrading and it still does not work - call me with a solution - now !!

I just need to take a few pages to take out of a document and create a new doc. I had the software and now it does not work. So i keep buying what I am told, by Adobe, will work, twice. Is this a continual scam to keep buying ??????????????????????????????????????
I need a solution now. If you can not help do not contact me, if you do not contact me I am going to discontinue the services I have. You have 24 hours. Today is 11/10/2014 6:34 EST.

Hi Paul,
I'm sorry for your frustration. You have an ExportPDF subscription, which you can use to convert PDF files to Word format. It does not allow you to remove pages from as PDF and create a new PDF. It looks like you may have placed an order for an Acrobat subscription today, but it has not processed. Once it does, you can download and install Acrobat, and then use it to extract pages from a PDF (choose Extract from the Pages pane on the Tools panel).
Best,
Sara

Menu bar items disappear, and external hard disks not mounting

Hi,
This problem started yesterday. I start up my Mac, and none of the menu bar items in the top-right of the screen show up. Then I noticed that none of my external hard disks had mounted.
Looking at the Activity Monitor, I saw that sustemuiserver was not running.
Reading around, I discovered that this usually follows a FrontRow hack (which I haven't installed). I tried deleting the ~/Library/preferences/com.apple.systemuiserver.plist file and logging out and back in again. Everything seems to work again, for a while. However, the same thing happened this morning.
Has anyone else experienced this, and anyone know a fix to stop it from happening?
Thanks!
Tom

I've been having the same problem for a while (I believe since 10.5.3). I have reinstalled OSX, installed OSX 10.5.6 combo hoping that it would fix it, but nothing yet. I have the problem only when I insert an expresscard into the slot and restart. It connects to a PCI expansion chassis. When I restart with the ExpressCard installed, all menu items dissappear and I can't eject volumes (hard drives) from the desktop. If I restart without the ExpressCard in, the menu bars seem to work properly. I tried with an older G4 running 10.4.11, with a CardBus card and the same chassis, and that worked fine... all menu bar items displayed and worked properly and I could eject disks.
I have also tried creating new users, but that didn't work either.

Wecam and USB mic input not working after upgrade to Lion

The audio inputs (micraphones) all show up in Syetem Preferences but if I talk into the microfones (on USB soundcard/Trust Webcam) no levels are being shown, I have tried clicking on eatch input it turh but n luck.
I am getting the impresion Lion broke lots of audio atuff so dont hold up mutch hope for a solution (Except upgrading to Snow Leperd).
Any ideas,
Ben

Beginning with Leopard, Mac OS X supports the so-called UVC web-cameras, you do not need any driver for them. I have just bought a small, pretty and cheap one, Logitech C110.
My older Genius 1321 is unfortunately unusable from SL onwards, but works with Tiger and Leopard. It is not UVC, and drivers are not available any more.
conclusion: if your camera is not UVC will not work via ‘plug-and-use’, you need an updated driver, check with the manufacturer. If they do not offer any, buy a UVC one, they are very cheap, but you do not need anything. The one I have just bought works fine, and also has internal mic.

Devmon and usb 3.0 not working

Hi. I just got a usb 3.0 external hard drive. I usually mount usb drives by plugging them in, then running devmon (from the AUR). This works fine if I plug it into a usb 2.0 port, but it doesn't mount if I plug it into a usb 3.0 port. Is this a problem with devmon, or is it deeper than that? Does anyone know how to get a usb 3.0 drive working in arch?

Another few more seconds later
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jun 6 22:37:55 CEST 2011
[ 0.000000] Command line: root=/dev/sda3 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000ba8cf000 (usable)
[ 0.000000] BIOS-e820: 00000000ba8cf000 - 00000000ba928000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ba928000 - 00000000bac6d000 (reserved)
[ 0.000000] BIOS-e820: 00000000bac6d000 - 00000000bac70000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bac70000 - 00000000bada3000 (reserved)
[ 0.000000] BIOS-e820: 00000000bada3000 - 00000000badb4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000badb4000 - 00000000badc8000 (reserved)
[ 0.000000] BIOS-e820: 00000000badc8000 - 00000000badca000 (usable)
[ 0.000000] BIOS-e820: 00000000badca000 - 00000000badd2000 (reserved)
[ 0.000000] BIOS-e820: 00000000badd2000 - 00000000baddc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000baddc000 - 00000000bae36000 (reserved)
[ 0.000000] BIOS-e820: 00000000bae36000 - 00000000bae79000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bae79000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000023fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H67-M EVO, BIOS 1502 03/02/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 23FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fce40] fce40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @ baffc000-bb000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000023fe00000
[ 0.000000] 0100000000 - 023fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 23fe00000 @ 23fdf6000-23fe00000
[ 0.000000] RAMDISK: 1fe3c000 - 1fff0000
[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000ba91e068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ba927a58 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ba91e140 09912 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000badd3f80 00040
[ 0.000000] ACPI: APIC 00000000ba927b50 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000ba927be8 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000ba927dc0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000ba927e00 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000023fe00000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000023fe00000
[ 0.000000] NODE_DATA [000000023fdfb000 - 000000023fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237400000-ffff88023e3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0023fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000ba8cf
[ 0.000000] 0: 0x000badc8 -> 0x000badca
[ 0.000000] 0: 0x000bae79 -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0023fe00
[ 0.000000] On node 0 totalpages: 2073574
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 745104 pages, LIFO batch:31
[ 0.000000] Normal zone: 17913 pages used for memmap
[ 0.000000] Normal zone: 1292295 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000ba8cf000 - 00000000ba928000
[ 0.000000] PM: Registered nosave memory: 00000000ba928000 - 00000000bac6d000
[ 0.000000] PM: Registered nosave memory: 00000000bac6d000 - 00000000bac70000
[ 0.000000] PM: Registered nosave memory: 00000000bac70000 - 00000000bada3000
[ 0.000000] PM: Registered nosave memory: 00000000bada3000 - 00000000badb4000
[ 0.000000] PM: Registered nosave memory: 00000000badb4000 - 00000000badc8000
[ 0.000000] PM: Registered nosave memory: 00000000badca000 - 00000000badd2000
[ 0.000000] PM: Registered nosave memory: 00000000badd2000 - 00000000baddc000
[ 0.000000] PM: Registered nosave memory: 00000000baddc000 - 00000000bae36000
[ 0.000000] PM: Registered nosave memory: 00000000bae36000 - 00000000bae79000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bb800000
[ 0.000000] PM: Registered nosave memory: 00000000bb800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88023fa00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2041320
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8101196k/9435136k available (4022k kernel code, 1140840k absent, 193100k reserved, 3332k data, 724k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 3502.351 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7007.56 BogoMIPS (lpj=11674503)
[ 0.000109] pid_max: default: 32768 minimum: 301
[ 0.000232] Security Framework initialized
[ 0.000286] AppArmor: AppArmor disabled by boot time parameter
[ 0.000813] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002105] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002644] Mount-cache hash table entries: 256
[ 0.002903] Initializing cgroup subsys ns
[ 0.002956] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.003025] Initializing cgroup subsys cpuacct
[ 0.003093] Initializing cgroup subsys memory
[ 0.003154] Initializing cgroup subsys devices
[ 0.003206] Initializing cgroup subsys freezer
[ 0.003258] Initializing cgroup subsys net_cls
[ 0.003311] Initializing cgroup subsys blkio
[ 0.003392] CPU: Physical Processor ID: 0
[ 0.003443] CPU: Processor Core ID: 0
[ 0.003497] mce: CPU supports 9 MCE banks
[ 0.003556] CPU0: Thermal monitoring enabled (TM1)
[ 0.003613] using mwait in idle threads.
[ 0.004408] ACPI: Core revision 20110316
[ 0.014593] ftrace: allocating 15966 entries in 63 pages
[ 0.018963] Setting APIC routing to flat
[ 0.019333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052347] CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz stepping 07
[ 0.158279] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.158451] ... version: 3
[ 0.158502] ... bit width: 48
[ 0.158553] ... generic registers: 4
[ 0.158604] ... value mask: 0000ffffffffffff
[ 0.158656] ... max period: 000000007fffffff
[ 0.158709] ... fixed-purpose events: 3
[ 0.158760] ... event mask: 000000070000000f
[ 0.178354] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.204892] Booting Node 0, Processors #1
[ 0.204985] smpboot cpu 1: start_ip = 99000
[ 0.318154] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.338050] #2
[ 0.338092] smpboot cpu 2: start_ip = 99000
[ 0.451259] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.471195] #3
[ 0.471237] smpboot cpu 3: start_ip = 99000
[ 0.584408] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.604344] #4
[ 0.604387] smpboot cpu 4: start_ip = 99000
[ 0.717624] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.737492] #5
[ 0.737535] smpboot cpu 5: start_ip = 99000
[ 0.850701] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.870637] #6
[ 0.870680] smpboot cpu 6: start_ip = 99000
[ 0.983848] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.003782] #7 Ok.
[ 1.003839] smpboot cpu 7: start_ip = 99000
[ 1.117044] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.123599] Brought up 8 CPUs
[ 1.123658] Total of 8 processors activated (56054.85 BogoMIPS).
[ 1.127936] devtmpfs: initialized
[ 1.128586] PM: Registering ACPI NVS region at ba8cf000 (364544 bytes)
[ 1.128645] PM: Registering ACPI NVS region at bac6d000 (12288 bytes)
[ 1.128699] PM: Registering ACPI NVS region at bada3000 (69632 bytes)
[ 1.128754] PM: Registering ACPI NVS region at badd2000 (40960 bytes)
[ 1.128810] PM: Registering ACPI NVS region at bae36000 (274432 bytes)
[ 1.129350] print_constraints: dummy:
[ 1.129443] NET: Registered protocol family 16
[ 1.129553] ACPI: bus type pci registered
[ 1.129686] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 1.129756] PCI: not using MMCONFIG
[ 1.129806] PCI: Using configuration type 1 for base access
[ 1.130178] bio: create slab <bio-0> at 0
[ 1.131083] ACPI: EC: Look up EC in DSDT
[ 1.131838] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.133267] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110316/psargs-359)
[ 1.133441] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110316/nsinit-349)
[ 1.133743] ACPI: SSDT 00000000baddb898 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.134135] ACPI: Dynamic OEM Table Load:
[ 1.134256] ACPI: SSDT (null) 006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 1.134406] ACPI: SSDT 00000000badd2d98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 1.134743] ACPI: Dynamic OEM Table Load:
[ 1.134863] ACPI: SSDT (null) 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 1.135446] ACPI: Interpreter enabled
[ 1.135497] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.135732] ACPI: Using IOAPIC for interrupt routing
[ 1.135795] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 1.135897] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 1.146678] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.160356] ACPI: No dock devices found.
[ 1.160407] HEST: Table not found.
[ 1.160458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.160632] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.160799] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.160855] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.160910] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.160976] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 1.161041] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xffffffff]
[ 1.161113] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 1.161135] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.161152] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.161153] pci 0000:00:01.0: PME# disabled
[ 1.161166] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[ 1.161173] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 1.161177] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.161180] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 1.161218] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.161238] pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
[ 1.161292] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.161295] pci 0000:00:16.0: PME# disabled
[ 1.161321] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.161339] pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
[ 1.161404] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.161407] pci 0000:00:1a.0: PME# disabled
[ 1.161426] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.161439] pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
[ 1.161485] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.161488] pci 0000:00:1b.0: PME# disabled
[ 1.161504] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.161558] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.161561] pci 0000:00:1c.0: PME# disabled
[ 1.161580] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 1.161634] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.161637] pci 0000:00:1c.2: PME# disabled
[ 1.161656] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.161711] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.161713] pci 0000:00:1c.3: PME# disabled
[ 1.161731] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 1.161786] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.161789] pci 0000:00:1c.4: PME# disabled
[ 1.161807] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.161861] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.161864] pci 0000:00:1c.5: PME# disabled
[ 1.161882] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
[ 1.161936] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.161939] pci 0000:00:1c.6: PME# disabled
[ 1.161957] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[ 1.162011] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.162014] pci 0000:00:1c.7: PME# disabled
[ 1.162037] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.162055] pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
[ 1.162120] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.162123] pci 0000:00:1d.0: PME# disabled
[ 1.162142] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
[ 1.162240] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[ 1.162253] pci 0000:00:1f.2: reg 10: [io 0xf110-0xf117]
[ 1.162259] pci 0000:00:1f.2: reg 14: [io 0xf100-0xf103]
[ 1.162265] pci 0000:00:1f.2: reg 18: [io 0xf0f0-0xf0f7]
[ 1.162272] pci 0000:00:1f.2: reg 1c: [io 0xf0e0-0xf0e3]
[ 1.162278] pci 0000:00:1f.2: reg 20: [io 0xf0d0-0xf0df]
[ 1.162284] pci 0000:00:1f.2: reg 24: [io 0xf0c0-0xf0cf]
[ 1.162314] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.162327] pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
[ 1.162345] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 1.162370] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[ 1.162383] pci 0000:00:1f.5: reg 10: [io 0xf0b0-0xf0b7]
[ 1.162389] pci 0000:00:1f.5: reg 14: [io 0xf0a0-0xf0a3]
[ 1.162395] pci 0000:00:1f.5: reg 18: [io 0xf090-0xf097]
[ 1.162402] pci 0000:00:1f.5: reg 1c: [io 0xf080-0xf083]
[ 1.162408] pci 0000:00:1f.5: reg 20: [io 0xf070-0xf07f]
[ 1.162414] pci 0000:00:1f.5: reg 24: [io 0xf060-0xf06f]
[ 1.162454] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.162508] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.162510] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.162512] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.162550] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.162605] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.162608] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.162613] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.162651] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 1.162706] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
[ 1.162709] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.162714] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.162770] pci 0000:04:00.0: [1106:3403] type 0 class 0x000c00
[ 1.162795] pci 0000:04:00.0: reg 10: [mem 0xfe600000-0xfe6007ff 64bit]
[ 1.162808] pci 0000:04:00.0: reg 18: [io 0xe000-0xe0ff]
[ 1.162891] pci 0000:04:00.0: supports D2
[ 1.162892] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
[ 1.162896] pci 0000:04:00.0: PME# disabled
[ 1.166886] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.166952] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.166957] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.166964] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.167037] pci 0000:05:00.0: [1b21:1042] type 0 class 0x000c03
[ 1.167064] pci 0000:05:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
[ 1.167180] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 1.167185] pci 0000:05:00.0: PME# disabled
[ 1.173540] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.173606] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 1.173610] pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.173617] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.173686] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
[ 1.173704] pci 0000:06:00.0: reg 10: [io 0xd000-0xd0ff]
[ 1.173735] pci 0000:06:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 1.173755] pci 0000:06:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 1.173768] pci 0000:06:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 1.173811] pci 0000:06:00.0: supports D1 D2
[ 1.173812] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.173817] pci 0000:06:00.0: PME# disabled
[ 1.180199] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 1.180264] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 1.180269] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.180276] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 1.180341] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604
[ 1.180439] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
[ 1.180497] pci 0000:00:1c.6: bridge window [io 0xf000-0x0000] (disabled)
[ 1.180500] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.180504] pci 0000:00:1c.6: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.180506] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.180507] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.180509] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.180510] pci 0000:00:1c.6: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
[ 1.180511] pci 0000:00:1c.6: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 1.180617] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.180680] pci 0000:07:00.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 1.180685] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.180693] pci 0000:07:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.180695] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.180696] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.180697] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.180699] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.180700] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.180701] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.180703] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.180704] pci 0000:07:00.0: bridge window [mem 0x000c8000-0x000dffff] (subtractive decode)
[ 1.180705] pci 0000:07:00.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 1.180771] pci 0000:09:00.0: [11ab:6121] type 0 class 0x000101
[ 1.180789] pci 0000:09:00.0: reg 10: [io 0xc040-0xc047]
[ 1.180801] pci 0000:09:00.0: reg 14: [io 0xc030-0xc033]
[ 1.180814] pci 0000:09:00.0: reg 18: [io 0xc020-0xc027]
[ 1.180826] pci 0000:09:00.0: reg 1c: [io 0xc010-0xc013]
[ 1.180839] pci 0000:09:00.0: reg 20: [io 0xc000-0xc00f]
[ 1.180851] pci 0000:09:00.0: reg 24: [mem 0xfe400000-0xfe4003ff]
[ 1.180900] pci 0000:09:00.0: supports D1
[ 1.180901] pci 0000:09:00.0: PME# supported from D0 D1 D3hot
[ 1.180905] pci 0000:09:00.0: PME# disabled
[ 1.180924] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 1.181001] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
[ 1.181056] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 1.181059] pci 0000:00:1c.7: bridge window [mem 0xfe400000-0xfe4fffff]
[ 1.181063] pci 0000:00:1c.7: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.181093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.181144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.181160] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 1.181174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 1.181188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 1.181202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
[ 1.181215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 1.181232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 1.181246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 1.181260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 1.181316] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.181477] pci0000:00: ACPI _OSC control (0x1c) granted
[ 1.184026] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.184520] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.185012] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.185470] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.185927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.186419] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.186915] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 1.187408] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.187923] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.187994] vgaarb: loaded
[ 1.188085] PCI: Using ACPI for IRQ routing
[ 1.188137] PCI: pci_cache_line_size set to 64 bytes
[ 1.188200] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.188201] reserve RAM buffer: 00000000ba8cf000 - 00000000bbffffff
[ 1.188203] reserve RAM buffer: 00000000badca000 - 00000000bbffffff
[ 1.188205] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 1.188206] reserve RAM buffer: 000000023fe00000 - 000000023fffffff
[ 1.188266] NetLabel: Initializing
[ 1.188316] NetLabel: domain hash size = 128
[ 1.188367] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.188426] NetLabel: unlabeled traffic allowed by default
[ 1.188490] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.188857] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.190920] Switching to clocksource hpet
[ 1.193502] Switched to NOHz mode on CPU #0
[ 1.193558] Switched to NOHz mode on CPU #3
[ 1.193562] Switched to NOHz mode on CPU #5
[ 1.193565] Switched to NOHz mode on CPU #6
[ 1.193568] Switched to NOHz mode on CPU #2
[ 1.193587] Switched to NOHz mode on CPU #1
[ 1.193598] Switched to NOHz mode on CPU #7
[ 1.193621] Switched to NOHz mode on CPU #4
[ 1.194552] pnp: PnP ACPI init
[ 1.194609] ACPI: bus type pnp registered
[ 1.194729] pnp 00:00: [bus 00-ff]
[ 1.194731] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.194732] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.194733] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.194734] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.194735] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 1.194736] pnp 00:00: [mem 0xbfa00000-0xffffffff window]
[ 1.194738] pnp 00:00: [mem 0x00000000 window]
[ 1.194762] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.194791] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 1.194793] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 1.194794] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 1.194795] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 1.194796] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 1.194817] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 1.194873] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 1.194928] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.194983] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.195038] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 1.195094] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.195127] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 1.195130] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 1.195131] pnp 00:02: [io 0x0290-0x029f]
[ 1.195132] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 1.195153] system 00:02: [io 0x0290-0x029f] has been reserved
[ 1.195208] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.195215] pnp 00:03: [dma 4]
[ 1.195216] pnp 00:03: [io 0x0000-0x000f]
[ 1.195217] pnp 00:03: [io 0x0081-0x0083]
[ 1.195218] pnp 00:03: [io 0x0087]
[ 1.195219] pnp 00:03: [io 0x0089-0x008b]
[ 1.195220] pnp 00:03: [io 0x008f]
[ 1.195220] pnp 00:03: [io 0x00c0-0x00df]
[ 1.195233] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.195239] pnp 00:04: [io 0x0070-0x0071]
[ 1.195243] pnp 00:04: [irq 8]
[ 1.195255] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.195259] pnp 00:05: [io 0x0061]
[ 1.195271] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.195279] pnp 00:06: [io 0x0010-0x001f]
[ 1.195280] pnp 00:06: [io 0x0022-0x003f]
[ 1.195281] pnp 00:06: [io 0x0044-0x005f]
[ 1.195282] pnp 00:06: [io 0x0063]
[ 1.195283] pnp 00:06: [io 0x0065]
[ 1.195284] pnp 00:06: [io 0x0067-0x006f]
[ 1.195285] pnp 00:06: [io 0x0072-0x007f]
[ 1.195285] pnp 00:06: [io 0x0080]
[ 1.195286] pnp 00:06: [io 0x0084-0x0086]
[ 1.195287] pnp 00:06: [io 0x0088]
[ 1.195288] pnp 00:06: [io 0x008c-0x008e]
[ 1.195289] pnp 00:06: [io 0x0090-0x009f]
[ 1.195290] pnp 00:06: [io 0x00a2-0x00bf]
[ 1.195291] pnp 00:06: [io 0x00e0-0x00ef]
[ 1.195292] pnp 00:06: [io 0x04d0-0x04d1]
[ 1.195317] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.195372] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.195376] pnp 00:07: [io 0x00f0-0x00ff]
[ 1.195379] pnp 00:07: [irq 13]
[ 1.195393] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.195518] pnp 00:08: [io 0x03f8-0x03ff]
[ 1.195521] pnp 00:08: [irq 4]
[ 1.195522] pnp 00:08: [dma 0 disabled]
[ 1.195552] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.195643] pnp 00:09: [io 0x0400-0x0453]
[ 1.195644] pnp 00:09: [io 0x0458-0x047f]
[ 1.195645] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 1.195646] pnp 00:09: [io 0x0500-0x057f]
[ 1.195647] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 1.195648] pnp 00:09: [mem 0xfec00000-0xfecfffff]
[ 1.195649] pnp 00:09: [mem 0xfed08000-0xfed08fff]
[ 1.195650] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 1.195674] system 00:09: [io 0x0400-0x0453] has been reserved
[ 1.195729] system 00:09: [io 0x0458-0x047f] has been reserved
[ 1.195783] system 00:09: [io 0x0500-0x057f] has been reserved
[ 1.195837] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.195892] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 1.195949] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 1.196004] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 1.196059] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.196078] pnp 00:0a: [io 0x0454-0x0457]
[ 1.196099] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 1.196154] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.196208] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 1.196227] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.196316] pnp: PnP ACPI: found 12 devices
[ 1.196367] ACPI: ACPI bus type pnp unregistered
[ 1.201698] pci 0000:06:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.201824] pci 0000:00:1c.5: BAR 14: assigned [mem 0xbfa00000-0xbfafffff]
[ 1.201880] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.201933] pci 0000:00:01.0: bridge window [io disabled]
[ 1.201987] pci 0000:00:01.0: bridge window [mem disabled]
[ 1.202041] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.202096] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.202148] pci 0000:00:1c.0: bridge window [io disabled]
[ 1.202204] pci 0000:00:1c.0: bridge window [mem disabled]
[ 1.202260] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 1.202317] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 1.202370] pci 0000:00:1c.2: bridge window [io disabled]
[ 1.202426] pci 0000:00:1c.2: bridge window [mem disabled]
[ 1.202481] pci 0000:00:1c.2: bridge window [mem pref disabled]
[ 1.202539] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.202593] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 1.202649] pci 0000:00:1c.3: bridge window [mem 0xfe600000-0xfe6fffff]
[ 1.202706] pci 0000:00:1c.3: bridge window [mem pref disabled]
[ 1.202764] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
[ 1.202817] pci 0000:00:1c.4: bridge window [io disabled]
[ 1.202873] pci 0000:00:1c.4: bridge window [mem 0xfe500000-0xfe5fffff]
[ 1.202930] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 1.202988] pci 0000:06:00.0: BAR 6: assigned [mem 0xd0020000-0xd003ffff pref]
[ 1.203054] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 1.203108] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 1.203165] pci 0000:00:1c.5: bridge window [mem 0xbfa00000-0xbfafffff]
[ 1.203223] pci 0000:00:1c.5: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 1.203293] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 1.203345] pci 0000:07:00.0: bridge window [io disabled]
[ 1.203404] pci 0000:07:00.0: bridge window [mem disabled]
[ 1.203461] pci 0000:07:00.0: bridge window [mem pref disabled]
[ 1.203523] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
[ 1.203576] pci 0000:00:1c.6: bridge window [io disabled]
[ 1.203632] pci 0000:00:1c.6: bridge window [mem disabled]
[ 1.203687] pci 0000:00:1c.6: bridge window [mem pref disabled]
[ 1.203745] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
[ 1.203799] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 1.203855] pci 0000:00:1c.7: bridge window [mem 0xfe400000-0xfe4fffff]
[ 1.203912] pci 0000:00:1c.7: bridge window [mem pref disabled]
[ 1.203974] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.204030] pci 0000:00:01.0: setting latency timer to 64
[ 1.204035] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.204092] pci 0000:00:1c.0: setting latency timer to 64
[ 1.204097] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.204154] pci 0000:00:1c.2: setting latency timer to 64
[ 1.204159] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.204216] pci 0000:00:1c.3: setting latency timer to 64
[ 1.204220] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.204277] pci 0000:00:1c.4: setting latency timer to 64
[ 1.204281] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.204338] pci 0000:00:1c.5: setting latency timer to 64
[ 1.204342] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.204403] pci 0000:00:1c.6: setting latency timer to 64
[ 1.204408] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.204467] pci 0000:07:00.0: setting latency timer to 64
[ 1.204472] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.204529] pci 0000:00:1c.7: setting latency timer to 64
[ 1.204531] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.204532] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.204534] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.204535] pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000dffff]
[ 1.204536] pci_bus 0000:00: resource 8 [mem 0xbfa00000-0xffffffff]
[ 1.204537] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 1.204538] pci_bus 0000:04: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 1.204540] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 1.204541] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 1.204542] pci_bus 0000:06: resource 1 [mem 0xbfa00000-0xbfafffff]
[ 1.204543] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 1.204544] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 1.204546] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 1.204547] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.204548] pci_bus 0000:07: resource 7 [mem 0x000c8000-0x000dffff]
[ 1.204549] pci_bus 0000:07: resource 8 [mem 0xbfa00000-0xffffffff]
[ 1.204550] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
[ 1.204551] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
[ 1.204553] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
[ 1.204554] pci_bus 0000:08: resource 11 [mem 0x000c8000-0x000dffff]
[ 1.204555] pci_bus 0000:08: resource 12 [mem 0xbfa00000-0xffffffff]
[ 1.204556] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
[ 1.204557] pci_bus 0000:09: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 1.204589] NET: Registered protocol family 2
[ 1.204801] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.205489] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.206456] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.206624] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.206679] TCP reno registered
[ 1.206737] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.206814] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.207017] NET: Registered protocol family 1
[ 1.207078] pci 0000:00:02.0: Boot video device
[ 1.454097] PCI: CLS 64 bytes, default 64
[ 1.454139] Unpacking initramfs...
[ 1.469927] Freeing initrd memory: 1744k freed
[ 1.470074] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.470571] Placing 64MB software IO TLB between ffff8800b68cf000 - ffff8800ba8cf000
[ 1.470638] software IO TLB at phys 0xb68cf000 - 0xba8cf000
[ 1.471058] audit: initializing netlink socket (disabled)
[ 1.471117] type=2000 audit(1308668392.246:1): initialized
[ 1.471464] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.472772] VFS: Disk quotas dquot_6.5.2
[ 1.472894] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.473035] msgmni has been set to 15826
[ 1.473201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.473285] io scheduler noop registered
[ 1.473336] io scheduler deadline registered
[ 1.473411] io scheduler cfq registered (default)
[ 1.473518] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.473533] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.473570] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.473603] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.473654] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.473687] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 1.473738] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.473772] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 1.473824] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.473857] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 1.473910] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.473943] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 1.474021] pcieport 0000:00:1c.7: setting latency timer to 64
[ 1.474055] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
[ 1.474113] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.474170] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.474182] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.474240] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.474252] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.474309] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.474321] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.474377] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.474433] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.474445] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.474500] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.474557] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.474569] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 1.474624] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.474681] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 1.474693] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 1.474749] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 1.474805] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 1.474848] intel_idle: MWAIT substates: 0x1120
[ 1.474849] intel_idle: v0.4 model 0x2A
[ 1.474850] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.474876] ERST: Table is not found!
[ 1.474952] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.495520] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.727640] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.780409] Linux agpgart interface v0.103
[ 1.780519] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.783142] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.783210] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.783302] mousedev: PS/2 mouse device common for all mice
[ 1.783393] rtc_cmos 00:04: RTC can wake from S4
[ 1.806962] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.807046] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.807205] cpuidle: using governor ladder
[ 1.807422] cpuidle: using governor menu
[ 1.807576] TCP cubic registered
[ 1.807627] NET: Registered protocol family 17
[ 1.807681] Registering the dns_resolver key type
[ 1.807780] PM: Hibernation image not present or could not be loaded.
[ 1.807782] registered taskstats version 1
[ 1.808339] rtc_cmos 00:04: setting system clock to 2011-06-21 14:59:53 UTC (1308668393)
[ 1.808436] Initializing network drop monitor service
[ 1.809320] Freeing unused kernel memory: 724k freed
[ 1.809432] Write protecting the kernel read-only data: 6144k
[ 1.809858] Freeing unused kernel memory: 56k freed
[ 1.811432] Freeing unused kernel memory: 784k freed
[ 1.818052] udevd[70]: starting version 171
[ 1.848158] SCSI subsystem initialized
[ 1.859230] libata version 3.00 loaded.
[ 1.860702] ata_piix 0000:00:1f.2: version 2.13
[ 1.860715] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.860777] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.874204] pata_marvell 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.874294] pata_marvell 0000:09:00.0: setting latency timer to 64
[ 1.874541] scsi0 : pata_marvell
[ 1.874694] scsi1 : pata_marvell
[ 1.874780] ata1: PATA max UDMA/100 cmd 0xc040 ctl 0xc030 bmdma 0xc000 irq 19
[ 1.874838] ata2: PATA max UDMA/133 cmd 0xc020 ctl 0xc010 bmdma 0xc008 irq 19
[ 2.013310] ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
[ 2.013404] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.013585] scsi2 : ata_piix
[ 2.013735] scsi3 : ata_piix
[ 2.014286] ata3: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20
[ 2.014343] ata4: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20
[ 2.014410] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.014470] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.166450] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.166691] scsi4 : ata_piix
[ 2.166837] scsi5 : ata_piix
[ 2.167572] ata5: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20
[ 2.167635] ata6: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20
[ 2.201656] ata3.01: ATA-8: ST31000524AS, JC45, max UDMA/133
[ 2.201730] ata3.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.213476] ata3.01: configured for UDMA/133
[ 2.213658] scsi 2:0:1:0: Direct-Access ATA ST31000524AS JC45 PQ: 0 ANSI: 5
[ 2.472676] Refined TSC clocksource calibration: 3502.004 MHz.
[ 2.472752] Switching to clocksource tsc
[ 2.639151] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.645887] ata5.00: ATAPI: ASUS DRW-24B1ST a, 1.04, max UDMA/100
[ 2.659203] ata5.00: configured for UDMA/100
[ 2.661324] scsi 4:0:0:0: CD-ROM ASUS DRW-24B1ST a 1.04 PQ: 0 ANSI: 5
[ 3.188348] ata6: failed to resume link (SControl 0)
[ 3.199136] ata6: SATA link down (SStatus 4 SControl 0)
[ 3.205115] sd 2:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.205217] sd 2:0:1:0: [sda] Write Protect is off
[ 3.205271] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.205283] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.240485] sda: sda1 sda2 sda3 sda4
[ 3.240776] sd 2:0:1:0: [sda] Attached SCSI disk
[ 3.247926] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.248016] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.248207] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.785877] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.762830] udevd[247]: starting version 171
[ 5.941693] ACPI: acpi_idle yielding to intel_idle
[ 5.998221] usbcore: registered new interface driver usbfs
[ 5.998241] usbcore: registered new interface driver hub
[ 5.998264] usbcore: registered new device driver usb
[ 6.005063] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.005077] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.005124] r8169 0000:06:00.0: setting latency timer to 64
[ 6.005129] r8169 0000:06:00.0: (unregistered net_device): unknown MAC, using family default
[ 6.005182] r8169 0000:06:00.0: irq 47 for MSI/MSI-X
[ 6.005301] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xffffc90005b76000, f4:6d:04:90:ab:d1, XID 0c200000 IRQ 47
[ 6.008153] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.008173] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 6.008176] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 6.008187] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 1
[ 6.035559] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.035564] firewire_ohci 0000:04:00.0: setting latency timer to 64
[ 6.047960] xhci_hcd 0000:05:00.0: irq 16, io mem 0xfe500000
[ 6.048008] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
[ 6.048010] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
[ 6.048012] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
[ 6.048014] xhci_hcd 0000:05:00.0: irq 51 for MSI/MSI-X
[ 6.048015] xhci_hcd 0000:05:00.0: irq 52 for MSI/MSI-X
[ 6.048017] xhci_hcd 0000:05:00.0: irq 53 for MSI/MSI-X
[ 6.048019] xhci_hcd 0000:05:00.0: irq 54 for MSI/MSI-X
[ 6.048021] xhci_hcd 0000:05:00.0: irq 55 for MSI/MSI-X
[ 6.048155] xHCI xhci_add_endpoint called for root hub
[ 6.048156] xHCI xhci_check_bandwidth called for root hub
[ 6.048171] hub 1-0:1.0: USB hub found
[ 6.048176] hub 1-0:1.0: 2 ports detected
[ 6.048213] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 6.048217] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 6.061414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.061426] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.061466] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.061469] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 6.061474] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.074958] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 6.074963] ACPI: Power Button [PWRB]
[ 6.075005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.075007] ACPI: Power Button [PWRF]
[ 6.077289] wmi: Mapper loaded
[ 6.081066] xHCI xhci_add_endpoint called for root hub
[ 6.081068] xHCI xhci_check_bandwidth called for root hub
[ 6.081083] hub 2-0:1.0: USB hub found
[ 6.081089] hub 2-0:1.0: 2 ports detected
[ 6.090962] ehci_hcd 0000:00:1a.0: debug port 2
[ 6.094844] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 6.094855] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe706000
[ 6.097662] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 6.104195] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.107582] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 6.107702] hub 3-0:1.0: USB hub found
[ 6.107705] hub 3-0:1.0: 2 ports detected
[ 6.107741] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.107786] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.107788] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 6.107793] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 6.140882] ehci_hcd 0000:00:1d.0: debug port 2
[ 6.144763] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 6.144767] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe705000
[ 6.157515] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.157652] hub 4-0:1.0: USB hub found
[ 6.157655] hub 4-0:1.0: 2 ports detected
[ 6.157827] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 6.157958] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 6.159284] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 6.159394] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 6.163037] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.163567] iTCO_vendor_support: vendor-support=0
[ 6.169912] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.169998] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.170054] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.181122] sd 2:0:1:0: Attached scsi generic sg0 type 0
[ 6.181161] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.224346] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.224432] HDA Intel 0000:00:1b.0: irq 56 for MSI/MSI-X
[ 6.224451] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.375068] asus_wmi: ASUS WMI generic driver loaded
[ 6.417181] usb 3-1: new high speed USB device number 2 using ehci_hcd
[ 6.426877] asus_wmi: Initialization: 0x0
[ 6.426896] asus_wmi: BIOS WMI version: 0.9
[ 6.426920] asus_wmi: SFUN value: 0x0
[ 6.427061] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
[ 6.427389] asus_wmi: Backlight controlled by ACPI video driver
[ 6.540812] hub 3-1:1.0: USB hub found
[ 6.540914] hub 3-1:1.0: 6 ports detected
[ 6.600302] firewire_core: created device fw0: GUID 001e8c000041f12c, S400
[ 6.645723] [drm] Initialized drm 1.1.0 20060810
[ 6.646844] usb 4-1: new high speed USB device number 2 using ehci_hcd
[ 6.770491] hub 4-1:1.0: USB hub found
[ 6.770596] hub 4-1:1.0: 8 ports detected
[ 6.836632] usb 3-1.5: new full speed USB device number 3 using ehci_hcd
[ 6.837027] hda_codec: ALC892: BIOS auto-probing.
[ 6.854475] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 6.854562] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.854614] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.854617] i915 0000:00:02.0: setting latency timer to 64
[ 6.901373] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 6.901375] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 6.901483] i915 0000:00:02.0: irq 57 for MSI/MSI-X
[ 6.901486] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.901487] [drm] Driver supports precise vblank timestamp query.
[ 6.930454] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.999817] usb 3-1.6: new low speed USB device number 4 using ehci_hcd
[ 7.202780] [drm] GMBUS timed out, falling back to bit banging on pin 7 [i915 gmbus dpd]
[ 7.221479] fbcon: inteldrmfb (fb0) is primary device
[ 7.296044] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input5
[ 7.296126] generic-usb 0003:1532:010B.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer Arctosa] on usb-0000:00:1a.0-1.5/input0
[ 7.298634] input: Razer Razer Arctosa as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.1/input/input6
[ 7.298678] generic-usb 0003:1532:010B.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer Arctosa] on usb-0000:00:1a.0-1.5/input1
[ 7.301572] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input7
[ 7.301619] generic-usb 0003:046D:C03D.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[ 7.301626] usbcore: registered new interface driver usbhid
[ 7.301627] usbhid: USB HID core driver
[ 7.384681] Console: switching to colour frame buffer device 240x67
[ 7.387438] fb0: inteldrmfb frame buffer device
[ 7.387439] drm: registered panic notifier
[ 7.388029] fixme: max PWM is zero.
[ 7.388079] acpi device:33: registered as cooling_device8
[ 7.388212] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.388254] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.388332] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.668560] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 7.710845] Adding 4002812k swap on /dev/sda4. Priority:-1 extents:1 across:4002812k
[ 9.763472] r8169 0000:06:00.0: eth0: link down
[ 9.763508] r8169 0000:06:00.0: eth0: link down
[ 10.916607] NET: Registered protocol family 10
[ 10.916917] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.464082] r8169 0000:06:00.0: eth0: link up
[ 11.464434] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.879083] eth0: no IPv6 routers present
[ 55.202534] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 55.241143] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.246800] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.252616] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.258836] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.289414] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.296425] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.383607] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.389855] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.395667] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.401709] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.407179] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.413315] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.419073] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.425050] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.479562] xhci_hcd 0000:05:00.0: WARN no SS endpoint bMaxBurst
[ 55.530588] xhci_hcd 0000:05:00.0: WARN: short transfer on control ep
[ 55.530764] scsi6 : uas
[ 55.540379] scsi 6:0:0:0: Direct-Access OEM Ext Hard Disk 0000 PQ: 0 ANSI: 5
[ 55.540546] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 55.747814] sd 6:0:0:0: [sdb] 244011446 4096-byte logical blocks: (999 GB/930 GiB)
[ 55.795900] scsi 6:0:0:1: CD-ROM Virtual CDROM PQ: 0 ANSI: 0
[ 55.844218] xhci_hcd 0000:05:00.0: WARN: Stalled endpoint
[ 55.844224] usb 2-1: URB BAD STATUS -32
[ 86.506382] sr 6:0:0:1: uas_eh_abort_handler tag -1
[ 86.506386] sd 6:0:0:0: uas_eh_abort_handler tag 0
[ 86.506392] sd 6:0:0:0: uas_eh_device_reset_handler tag 0
[ 86.506395] sr 6:0:0:1: uas_eh_device_reset_handler tag -1
[ 86.506398] sr 6:0:0:1: uas_eh_target_reset_handler tag -1
[ 86.506400] sd 6:0:0:0: uas_eh_bus_reset_handler tag 0
[ 86.614237] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 86.816045] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 87.018984] usb 2-1: device not accepting address 2, error -22
[ 87.125860] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 87.328649] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 87.531642] usb 2-1: device not accepting address 2, error -22
[ 87.638476] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 87.841289] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 88.044253] usb 2-1: device not accepting address 2, error -22
[ 88.151031] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 88.353911] xhci_hcd 0000:05:00.0: Setup ERROR: address device command for slot 1.
[ 88.556863] usb 2-1: device not accepting address 2, error -22
[ 88.556875] sd 6:0:0:0: sense urb submission failure
[ 88.556888] usb 2-1: USB disconnect, device number 2

External hard-disk not working with firewire under Snow Leopard

Hi. I have a LaCie d2 external hard-disk that has Firewire 800, 400 and usb2. I previously used it on my old (angle-poise) iMac connecting using the Firewire 400 socket. I've just a got a new mac with Snow Leopard and I thought it would we best to connect to the LaCie with Firewire 800. However when I do this, the disc mounts ok, but browsing in the Finder is really slow and copying files from the disk to the imac seems to work at a really slow rate (less than USB1 speed) if at all ! However, I switched to using the USB2 connection instead and it works like a dream. What gives ? Is Firewire in Snow Leopard buggy ??

There's no problem with the drive.
Maybe true, and the drive would probably work fine with Leopard. One thing that's obvious is that Apple did make changes in the way that FireWire works in Snow Leopard. Many drives and drive manufacturers work well with SL, but there have also been reports of firmware issues by Western Digital and other companies.
Have you checked with your vendor to see if they are offering a firmware update for your drive?
BTW, I got a new FW case a few months ago while at a Fry's electronic store. The brand new USB2 and FW400 cables worked fine. The FW800 cable did not, but another cable came to the rescue. Just saying...

USB Hard Drives Not Working Properly?

I have an MSI K9N Neo V2/V3? (msi-7369) motherboard with 2GB Ram and an Athlon 64 x2 4200+ processor.
I have a strange USB Port problem! I have a 5 year old home built machine running Windows 7 32bit. Lately the USB ports on the front and back of the machine are not working properly with external hard drives? USB powered or mains powered. They are recognised and show all the folders but If I try to view or transfer anything it freezes the drive?
The ports are working fine for USB sticks though?
I have removed the USB controllers and let the system reinstall them again, but its no better?
I would format the drive and reinstall windows but I have not backed-up all my videos I want and my system restore has been disabled?
I have tried a new USB PCI card but the same happens?
I have updated the bios and all updates with the MSI Live update program.
Can anyone recommend anything to try before I start removing stuff?
Someone told me to update my USB drivers but I can't find any?
Any help appreciated

I have formatted and installed Windows 7 64bit and USB's were working!!
Updated and now they don't again?
Its going out the window soon!!
Could the firmware update play a part? Am I able to go back to the older firmware?

N900 Hard disk not working

Hi,
I had dropped my n900 twice and after the second fall it stopped working.
On giving it for repairs i was told that the hard disk is now corrupt and its not replaceable here.
Right now the phone can on dial and recieve phone calls.
I am not able to recieve or send messages or perform any other action.
The device shows only 60mb memory and even after putting a 2gb memory card no other function works.
Is there any solution to this.
Please help.
Thanks.
Solved!
Go to Solution.

The EMMC is what's called SMT in tech jargon. (Surface Mount Technology) i.e it's soldered to the surface of the board rather than having pins that go through holes. Makes it extremely difficult if not impossible to remount. There's probably someone out there who could resolder it, I've heard rumor of a company that can resolder the USB port when that comes adrift, I'm not sure who it is though. I don't think it's possible to run the O/S from MMC either.

External hard disk not working

Hi, i have a hard disk that is connected via usb. It worked recently and still does on a PC but not accessible or even showing in iMac. Anybody know what i have to do to get it working again?

How is the disk formatted and has it ever worked on your iMac? I suspect it's formatted for the PC as NTFS which OS X will read but not write to. If you must share this disk with both your PC and Mac then you should first determine how it's formatted and if it can be shared. In the event it's formatted as most external HD's for NTFS then I'd recommend downloading and installing NTFS-3G will allow the Mac to write to it. You can find this at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If it's a simple matter of not being seen by the Mac then try resetting the SMC, don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

WRT110 Firmware Upgrade Crashed IE8, Router Does Not Work

Last night, at 2:30am EST I felt the need to upgrade the firmware on my router. I downloaded the latest firmware for the WRT110 v1.0 and attempted to upgrade the firmware. Close to the end of the firmware upgrade process IE8 crashed and left my router in a state of limbo.
I called Linksys support only for them to tell me that I have 3 options (all which included paying money to them) :
Pay $40 to add 6 months of extended warranty to the router and support for it
Pay $30 for a one time support call
Buy a new router through them with waived shipping.
This wasn't exactly what I wanted to hear at 3 am, so naturally I was quite irritated. Of course, the supervisor asking me if I was sure I downloaded the correct firmware and telling me to go on the internet when it's obviously not working really did not help either.
I tried the two reset options suggested by the forums here and the supervisor on the phone, pressing down the reset button for 30 seconds and pressing it down for a minute and unplugging for 30 seconds. Neither worked, so the supervisor essentially told me the router needed to be replaced.
Now, is there any actual way of getting the router back to a working state?

There is always a way. Check this topic and follow the procedures.

I changed my apple ID to a new email. My old ID is still shows up and I tried to reset my iPad and also log out of my new I'd and it is still not working

I Need to update my apps and I changed my ID because of a new email. I tried to log out of my new apple I'd and log in but my old one still pops up. I've reset my iPad too and changed all my settings to my new apple I'd and it still will not work

You should not change your Apple ID but you can change your e-mail address associated with your Apple ID.
All content are forever tied to the Apple ID used to obtain them, content cannot be merged or transferred to another Apple ID.
https://appleid.apple.com

HARD DISK NOT WORKING AFTER MOTHER BOARD REPLACEMENT

Mother board of my laptop had to be replaced. meanwhile i had used hard disk from my laptop as external hard disk without formatting. After replacement of motherboard i have reconnected the same hard disk without formatting. but system does not boot up to operating system.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

WRT610N New Firmware Upgrade and USB Hard disk not working

Similar Messages

Maybe you are looking for