WRT610N Only Default share is Visible

Hi,
I'm having an issue with my WRT610N v2 router. I've connected a USB HDD that has been correctly recognized.
I've have configured sharing settings but only the Default share is visible from the network. I've tested it from Ubuntu and Windows 7 machines with same results. I will appreciate any help to solve this.
Shared Folders Summary
Partition
Share Folder
Groups with Access
Default
WD15
/WD15
admin(r & w)
HDD
WD15
/WD15
admin(r & w), linux(r & w)
From linux terminal l I typed the following commands:
findsmb
                                *=DMB
                                +=LMB
IP ADDR         NETBIOS NAME     WORKGROUP/OS/VERSION
192.168.2.1     WRT610N        [MSHOME] [Unix] [Samba 3.0.25c]
192.168.2.100   LINUX-DESKTOP+[MSHOME] [Unix] [Samba 3.4.7]
smbclient -L WRT610N
Domain=[MSHOME] OS=[Unix] Server=[Samba 3.0.25c]
   Sharename       Type      Comment
   Default         Disk
   IPC$            IPC       IPC Service ("")
Domain=[MSHOME] OS=[Unix] Server=[Samba 3.0.25c]
   Server               Comment
   WRT610N
   Workgroup            Master
   MSHOME

I think only the default folder is mapped on the router that is reason you are not able to access the other folders.
To access the other folder as well open the setup page of the router go Storage Tab > Click on Create Share new window will pop up on the screen wherein you will find the Public or Default, So below you need to click on "Return to Upper Folder". Once you click on it the Current Folder will be "Root"(/) then give the Display Name.
Now add Admin in Group with Access then click on save settings.
Now you need to map the drive on you computer. Once you will map the drive you will be able see all the folders.

Similar Messages

Remove admin's default share from file sharing

I'd like to know if it is possible to remove the admin default shares from "file sharing".
For security reasons, I'd like only specific shared folders by AFP protocol become available for remote access and mapping.
By default, the OS X 10.9.1 automatically creates a share from the root folder (/) after activate the "File Sharing" option.

Are you logging in using the credentials of user account that is on the Mac.
It doesn't default to allowing access to the root of the hard drive. However, if you log into a Mac with a user account that has a user account on that Mac, then they will have access to the root of the hard drive over file sharing. Logging into a Mac is logging into a Mac no matter where you log in from.
If you want to limit the scope of file sharing users, create Sharing Only accounts in Users & Groups System Preferences. You can then give those users access to the specific folders you want to allow them access. They will not have access to the root of the hard drive unless you give it to them.

Cifs oes2sp1 linux Default Share names

Why is it the default Volume Share name always show up when I restart cifs.. especially _ADMIN volume. I tried to use iManager to remove them, also use cifsnov -srn from server console. It seems to work until cifs restart and they show up again. Any ideas? Thank you.

Sept 2013, OES11 sp1 : Still Not Fixed.
Also, FYI, if in iManager I remove the default shares where the sharename is the same as the volume name and I add a specific share where the share name is different from the volume name and it accepts that and it presents that just as expected then the CIFS server should NOT be auto adding the shares I have removed. This is especially vexing when using junctions between two volumes on the same server.
Please ONLY share the volumes I have explicitly exported via iManager. NO MORE DEFAULT SHARES! Please and Thank-you.
Ron

Iomega 2003 Storage Server AFP Shares not visible since upgrading to 10.5.6

Iomega suggested that I post here. No AFP shares are visible since I installed the suggested 10.5.6 OSX upgrades. Nothing changed on the Iomega 2003 storage server side and it been running fine with the shares visible for over two years. What has changed in OSX? DO I need to open something up now for security purposes?? PLease advise as I am dying here!!
Peace,
DIGJOE

After working with it some more... Have figured out that the "lock" screen is a security measure from the server software. somehow, I have it set [didn't mean to do this] to show that upon each reboot now, and I'm not sure how to disable it. I'll get into the server manuals and have to research that.
It also seems that the server software sees each HD as another computer somehow... and each partition as well. Curious... Anyway, once I got past the "loced" screen, the fresh install of the server software was in effect, and the primary HD is showing both patitions.
All is happy... [doing little apple happy dance]...
I zero'd out both of the new HD's, and am forgoing the install of the newer 10.5.6 on them. My 10.4.11 server is just fine actually, had no problems with it until I tried to upgrade. I suspect that the server software either wants only 10.4.11 server on everything, or somehow I must "tell " it to accept the other 10.5.6. Not real sure how to do that, however will put my muscles inbetween my ears in gear to think about for awhile.
Thanks for your assistance.

I accidently unmarked the book marks tool bar, the tool bar and the menu bar how do i get them back ?becaus now only the tabs are visible and i cant access my features or book marks

i was getting to know my firefox so i accidentally unmarked the menu bar the book marks tool bar and the tool bar. so now only my tabs are visible and i cant get to any of my add-ons or extensions.
and even surfing the net has become difficult cause there is almost nothing i can do with a new empty tab.
how can i get these bars back. i tried taking the cursor up to the thin line above the tabs and the window border but the menu to mark the above mentioned features does not appear any more.
i tried restarting firefox several times but it didn't work. i even uninstalled and completely downloaded a new version of firefox and installed it but the problem still persists.
i am operations system is windows XP.

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

OS X Lion in Active Directory - disable default shares?

I have an iMac running Lion (10.7.3) which is joined to my Active Directory domain. If I enable SMB file sharing then even with no users explicitly enabled for sharing and no shares explicitly defined domain users can access the Mac via Windows file sharing. Depending on the type of user (administrator or not) who is accessing the Mac they will see either just their Mac home directory exposed via SMB sharing, if they are a non admin user, or their home directory plus all attached hard drives (Macintosh HD, Time Machine Backup) exposed if they are an admin user.
This is very insecure and prevents me properly exploiting SMB sharing.
Is there any way to 'disable' these default shares leaving just shares I create explicitly?
Thanks,
Chris

Thanks David, that pretty much did the trick! Even though the article refers to Lion Server it seems the same holds true for Lion desktop. Also, the VirtualAdminShares flag is not present ther by default so it seems in its absence it defaults to Enabled. I disabled it (set flag to NO), rebooted and now admins do not see all attached disks as shares.
However, any user who connects still sees their home directory as shared even though those are not explicitly shared. it would be nice to be able to control that too but it is much better than previously so I am not too concerned.
Thanks again for that useful pointer.

I Cant insert all values to the table But only Default Values r inserted?

Hai,
i can insert only default values to the database. Other values are not shown in DB.
Steps I have done so far:
I have created EO based on VO and VO has the query : select * from emp. Attached to AM.
That AM is attached to the Page. The page consists of employeed details and SAVE button.
Set controller for that page and CO-PR calls create method in AM .
Default values for who columns and SLNo also set through sequence.
In CO-PFR I call apply method which commits the data.
when i run the page and giving values it is not inserted into table but only default values are inserted.
I checked with System.out.println(getattribute("my attr").toString()). It send output correctly.
But y other values are not inserted.?
Anybody plz plz help me in this regard. I am struggling with this for last 1 week. I have to apply this to another realtime scenorio? Deadline is near.
Regards,
Lakshmi Chandiran

Hai Prince,
Thanks for your immediate response. pls find my codes written in EO,AM,CO.
In VO i havent added anythig xcept the query.
The following fields are only getting inserted in the table.
My EOImpl code:
public void create(AttributeList attributeList) {
super.create(attributeList);
System.out.println("NOW I AM IN CREATE METHOD");
OADBTransaction transaction = getOADBTransaction();
Number EMP_ID = transaction.getSequenceValue("Employeeid");
setEmpId(EMP_ID);
setCreationDate(transaction.getCurrentDBDate());
setStartDate(transaction.getCurrentDBDate());
setLastUpdateDate(transaction.getCurrentDBDate());
setCreationDate(transaction.getCurrentDBDate());
VO:
select * from emp1
AM:
public void saveForm()
OAViewObjectImpl empvo = getEMP_VO();
System.out.println("NOW I AM IN AM SAVEFORM OF EMTS");
if ( !empvo.isPreparedForExecution())
empvo .executeQuery();
Row prow = empvo .createRow();
empvo .insertRow(prow);
prow.setNewRowState(Row.STATUS_INITIALIZED) ;
System.out.println("NOW I AM IN ROW CREATED");
public void commitdata()
System.out.println("commitMethod()") ;
getDBTransaction().commit();
CO:PR & PFR:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
if(!pageContext.isFormSubmission())
pageContext.getApplicationModule(webBean).invokeMethod("saveForm",null);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule EMP_AM = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)EMP_AM.findViewObject("EMP_VO");
if ( pageContext.getParameter("BtnSave") != null )
pageContext.getApplicationModule(webBean).invokeMethod("commitdata");
s1 = (String)vo.first().getAttribute("Empname");
s12 = (String)vo.first().getAttribute("Emptype");
s3 = (String)vo.first().getAttribute("Emporg");
s4 = (String)vo.first().getAttribute("Empcity");
System.out.println(" values are " + s1+s2+s3+s4);
here i can get the values correctly printed in output as entered in the form.
I dont know where the problem is.
plz help me.
Thanks in advance,
Regards,
Lakshmi Chandiran

How to make only some open Invoices visible in Incoming Payments Wizard ?

I want only to make only some Open Invoices visible in Incoming Payment. Can i use series (Document Numbering) ? Lets say I have SBO in 2 cities and want to user of city A only se open invoices of city A in incoming Payments , and user of city B to see only invoices created in city B . Any ideas ?

You may use Project code to reach your goal.
Thanks,
Gordon

MIRO: Only Default tax code appears on header, no other tax codes displayed

Hi Friends,
In MIRO header, only default tax code appears. No other tax codes even thought they are defined in FTXP for the country appear there. Is there any customizing to be done so that all these tax code also show up there? This is happening only for a few company codes which do not have reporting country assigned to tax codes in FTXP. Is there any specific logic/reason based on reporting country that all other tax codes do not appear in MIRO?
Thanks and regards,
Pinky

Tax codes need to be defined for the country which is same as the country of the relevant company code you are using in MIRO. Also the country needs to be assigned to the tax calculation procedure in OBBG.
Thanks and regards
Kedar

Removal of Default share on Windows 2003

Dear All,
Recently our Audit team taken review and pointed out that we need to remove default share ($) from all the drives.
I want to know if i remove default share $ will that affect SAP.
OS windows 2003
ECC6
Regards
Abhijit

Hi
from SAP's standpoint, you do not need C$ and D$, so, you can un-share them with no problem.
as stated by many, you need SAPLOC and SAPMNT... but that's all.
close this message if this resolves your issue.

Only safari adress bar visible after playing a youtube video.

Only safari adress bar visible after playing a youtube video, rest of the screen is white, what can I do?

If you are using Safari for Mac, it could be a Safari extension causing this.
From the Safari menu bar click Safari / Preferences then select the Extensions tab.
If you have any installed, turn that off, quit then relaunch Safari, try a video.
It would really help when you post to tell us which operating system you are using, Mac or Windows.
You could also try troubleshooting the Flash plugin which is required for most of the content on YouTube.
http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,

Get bounds only of what is visible?

Okay, So when you use a clipping mask there can sometimes be a lot of art that is invisible. If you "Select All" you'll get a rectangle only around what's visible. I want the bounds of that rectangle.
I tried itterating the art but I don't think that the art type is the best way to figure this one out. And if you use AIGroupSuite to test if an art group is "clipped" with GetGroupClipped, you get the bounds of the larger art that I'm trying to avoid.
I didn't see anything about bounds of a "selection" in the docs.
Anyone got a hint on where to look for this one?

you should do this way:
//Get Art Bounds for each AIArtHandle
AIRealRect artBounds;
error = sAIArt->GetArtBounds(*iter, &artBounds);
aisdk::check_ai_error(error);
//Compute selection bouding box.
AIRealRect& boundingBox;
//for each selected AIArtHandle, bouding box needs to be updated. (loop)
if(boundingBox.left > artBounds.left)
     boundingBox.left = artBounds.left;
if(boundingBox.top < artBounds.top)
     boundingBox.top = artBounds.top;
if(boundingBox.right < artBounds.right)
     boundingBox.right = artBounds.right;
if(boundingBox.bottom > artBounds.bottom)
     boundingBox.bottom = artBounds.bottom;
Finally, you will have your selection bounding box.

Why am I only offered share screen and not connect as?

I have one laptop on the network that only offers "share screen" and not "connect as". Can anyone help?

File Sharing and/or Remote Login is not turned on in System Preferences > Sharing on the Mac you are trying to connect to

Live SWF video Plays Locally But Only The Skin is Visible Remotely.

Hi Guys,
I have tested other embedded videos and they will play remotely so I know the hosting site is working.   Can anyone please look and tell me what I can try to make the vid work?   Currently, the live video will play locally and remotely from this computer where all the files are stored but only the skin is visible on any other remote computer's web browser.
I will post any info you ask for.   I have been working on this forever.   Please, someone who is good at this help me?
Here are my files look (I can't figure out how to blow this up larger - can you see it?):
I will try whatever you suggest.
Chris
P.S.   My live video is being broadcast by Adobe Flash Media Encoder to Adobe Flash Media Server 4 and inserted into Dreamweaver. Dreamweaver Support watched me re-create the Flash file and import into Dreamweaver and we looked at it for hours together. In the end, they suggested I post here because we could not figure it out / it is not supported. Ideas?   Can I provide any other helpful info?P.S. The Adobe Dreamweaver Tech Support said to post here and that the Expertise Team (you I suppose) would figure it out. I am running Windows 7 64-bit OS.

According to you since the stream published by FMLE to FMS is playing fine on the other players even remotely, it doesn't look like FMS problem.
But could you please eloborate the logic you are using in your player?

[svn:fx-trunk] 5499: Fix TH-3887: [Windows Only] Default system browser preference is ignored at runtime.

Revision: 5499
Author: [email protected]
Date: 2009-03-23 14:59:54 -0700 (Mon, 23 Mar 2009)
Log Message:
Fix TH-3887: [Windows Only] Default system browser preference is ignored at runtime.
Fix SDK-19781: FDB 'run' fails with StringIndexOutOfBoundsException on Windows, if command processor produces AutoRun output.
Ticket Links:
http://bugs.adobe.com/jira/browse/TH-3887
http://bugs.adobe.com/jira/browse/SDK-19781
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/DefaultDebuggerCallbacks.ja va
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/IDebuggerCallbacks.java

Revision: 5499
Author: [email protected]
Date: 2009-03-23 14:59:54 -0700 (Mon, 23 Mar 2009)
Log Message:
Fix TH-3887: [Windows Only] Default system browser preference is ignored at runtime.
Fix SDK-19781: FDB 'run' fails with StringIndexOutOfBoundsException on Windows, if command processor produces AutoRun output.
Ticket Links:
http://bugs.adobe.com/jira/browse/TH-3887
http://bugs.adobe.com/jira/browse/SDK-19781
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/DefaultDebuggerCallbacks.ja va
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/IDebuggerCallbacks.java

WRT610N Only Default share is Visible

Similar Messages

Maybe you are looking for