Wrt610N please help ps3 remote play and also nothing sees the 5ghz band
I have finaly hooked everything up last night. I have everyything on mac filter and static IP address. Questions is though I would like to have my laptop D-link extreme N adapter and my ps3 on the 5ghz band. Can I do this... cause Im looking in the settings and it says Mixed,, N only, A only.... I thought it could do G also.... PLease explain there...I cant even get my laptop adapt to see the 5ghz band! Weird.... Also Im trying to get my ps3 on the best connection possible.. I would like to also have remote play through the net. Heres my problem... I enable it on the ps3 turn off the system.....and about 1 or 2 minutes it turns on by itself... IT does this quiete frequently... Again I have a wrt610N dual band wireless router. I thought I read somewhere if you change the broadcast channel it will help with the remote play..so I placed it on channel 11 and also placed the ps3 in the dmz... I am away from my home so I will try more out later...I woudl like to take the ps3 out of dmz if possible... I have unup enabled. THanks!!
Beside doing DMZ for your PS3, you better Open the Ports for your PS3 on your Linksys Router. TCP Ports: 10070 - 10080, UDP Ports: 50000 ,UDP Ports: 6000-7000, 10070. This will solve your Problem.
Similar Messages
-
PLEASE HELP: Mouse Pairing Failed and I cannot use the computer!
Hi,
PLEASE HELP!
The batteries in my Blue Tooth, wireless Mighty Mouse died. I changed the batteries and since then cannot get the mouse to work with my computer. I went through the process of attempting to connect the mouse (this came up after I restarted the computer) and the pairing has failed a dozen times or more even though the computer recognizes the mouse. I have very limited control over the computer because I do not have a backup mouse. I have been at this for 3 hours and cannot solve this problem.Try to connect in recovery mode, explained here:
iOS: Unable to update or restore -
My iPhone apps wouldn't open they just blink for a second and the home screen comes back again...i tried installing a free app from the AppStore but it didn't work and also tried resetting the iPhone but ddnt work as well please help what do i do??
Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
Please help! My IPod touch won't recognize the digits I enter for my password and won't put a "dot" in the password squares. It also speaks the numbers very, very fast. Can anyone help?
Sounds like some accessibility features have been turned on. See this article for instructions on turning them off.
http://support.apple.com/kb/HT3577
B-rock -
The Home Hub PS3 Remote Play Issue
The problem:
If you set your PS3 to allow remote start via the internet (a better and more 'greener' option than leaving it on all day) and power it down, the PS3 will turn on again only after a few seconds without you connecting via remote play, after nothing connects to the PS3 after 2-3 minutes, the PS3 removes the option to allow remote start via the internet to save the PS3 powering up and down all day, thus rendering the remote play feature useless unless your in the same house which is somewhat pointless.
Now..The PS3 doesn't start by itself from outside influence, it starts from a broadcast from the router itself. You can test this easily by turning your PS3 off with Internet Remote Start enabled, and immediately thereafter yanking the internet connection from your router. The PS3 will still start by itself, even with no internet connection.
The culprit is the ARP table of the router, which is what links the MAC address to the IP address. On most routers, this is a dynamic table which updates by itself every now and then, by sending a broadcast (signal to all machines on a network) asking for a reply from a specific IP address. It goes like this:
BT HOME HUB: Hello, I have an IP address 192.168.0.144 in my system here that reported it had a MAC address of 01:44:23:F4:E5:23. Could the owner of IP address 192.168.0.144 please report the MAC address so I can confirm and update?
PS3: Wohoo, I have 192.168.0.144. My MAC address is 01:44:23:F4:E5:23. Please update your records.
(30 seconds go by)...
BT HOME HUB: Hello, I have an IP address of 192......... and on it goes. My router checks every 30 seconds, some check every minute, others every hour, 6 hours, etc etc. The problem here is though, that the ARP table update request will turn on the PS3. So mine gets a wakeup-call every 30 seconds.
This is called an ARP broadcast, it is sent from the router (and other machines on the network) to the IP 255.255.255.255, which is received by all devices on the network. The PS3 will only respond to ARP broadcasts from its Default Gateway, meaning only the router can wake it by ARP broadcast, the other machines on the network cannot.
The Solution:
Allow users to telnet their own home hub or create a firmware update fix.
We've been looking into getting the new BT Infinity, can anyone confirm if the Infinity hub is the same as the HHv2 with all its problems?Very happy this morning, after over a year of waiting for the remote play feature to work with the home hub and PS3..it looks like BT have added a fix into the Home Hub v2 FIBRE. last night i thought i might as well give the remote play a go as there might be a slim chance of it working AND IT DID! i set the PS3 to remotely start via the internet, powered down and it stayed in standby mode!!
unfortunately this doesn't mean the old hubs work though (although i cannot test this) so ill still be bumping this until there's an official response. Can anyone confirm that the old hubs still don't work for me? we got rid of the old hub when we upgraded. -
I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id
There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons, -
i forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder
If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. Then you can reset the password as explained here: http://support.apple.com/kb/PH2617. Of course, you can only do this if it's your ID.
-
Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.
Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
Or refer to this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866 -
Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.
Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125
-
I bought an ipad from some one and i can't activate it and it keeps on showing that i should type the apple id and password link to that ipad which i dont know and i can't even locate thi guy. Please help if there is a chance to activate the ipad. Thanks
There is no chance at all that you can activate the iPad without the previous user's Apple ID and password. That is the feature of iOS 7 Activation Lock.
Every time I read one of these post, I can't help but think that the user asking about this (in this case - you) was duped into purchasing a stolen device. If the seller was legit, they would have erased the device completely before they sold it. -
Please Help me in Labview and MS Access Database Connective
Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
thanks in advance .duplicate post
-
How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?
Did you change the ID you are using for iCoud? If so, did you delete the account, then sign back in with your new ID on your device?
-
have installed broadband tuner but i am unable to uninstall it ? plz help me and also tell me the i can bring setting of sysctl -a to default
drcul2008 wrote:
have installed broadband tuner but i am unable to uninstall it ? plz help me and also tell me the i can bring setting of sysctl -a to default
Why? It comes with an uninstaller.
Contact the developer for uninstall instructions. -
Hello I've forgotten my security questions and also forget what the alternative e-mail, please Create
account security
Please call apple @ 1-800-694-7466
ask for the account security team
you may want to add a credit card to your iTunes account before calling; so they will have a way to verify your identity.
Peace, Clyde -
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9
Maybe you are looking for
-
Problem of GL ACCT in PO creation
while creating PO for consumables materials (widout mat master) following error appears. " GL acct No. 55000104 can not be used. (please correct) Msg. No. ME 045 Diagnosis: Comparison of the field selection string from GL acct 55000101 & account assi
-
Exchange rate difference not going to the correct GL account
Hello, In the transaction OB09, I have given the GL account 702000 for exchange rate difference realized loss and gain. I have also maintained the exchange rates in the transaction OB08. In transaction F-44(clear vendor), I give the foreign curreny(E
-
RTF Report output shows Duplicate or Missing lines
Hi, We have a program which prints XML output into the concurrent program output file and the output for this file is set to PDF attached to an RTF template. The RTF output generated should ideally have the output in the following manner Header 1 - L
-
Hi guys, i basically need to retrieve some data into a table from the database(mySql). but the data just cant be out. i need help from you all :). basically i have a form package, entity package, controller package, sqlAction package(where it calls t
-
Oracle 10g support for TRU 64 4.0.f
Hi, I need some information on, Can Oracle 10g be installed on TRU64 unix version 4.0.f. If it does not support directly, is there a patch available etc.. Can somebody confirm. Thanks, Nagarajan Dandapani