WRT610N Resets to Defaults on its own 3 Times now.

Hello All,
 I currently have a WRT610N V1.0 that has now randomly RESET to factory Defaults all on its own 3 times now. on this last time it has gotten to the point where Port fowarding no longer functions at all. I like the router overall (not Tickled pink, but ti has been good otherwise) and do not want to go back to my older WRT 350N if I do not have to. Any one else seee this happen, and I am one of the people also having a problem trying to update the firmware that is currently on the support page as well. I am currently running Firmware 1.00.03 B15. Thanks.

If you are unable to upgrade the firmware on your Router, then you can try to upgrade the firmware on your Router using TFTP Utility.
Click Here to download the TFTP Utility. 
Once you download the Utility you can follow the steps to upgrade the firmware on your Router. 
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Similar Messages

  • How do I correct problems with my trackpad were it is either unresponsive to my finger as a mouse or the cursor appears to move on its own at times?

    How do I correct problems with my trackpad where it is either unresponsive to my finger as a mouse or the cursor appears to move on its own at times?

    http://support.apple.com/kb/TS1248
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If these steps do not help, contact Apple.

  • I have reset my apple ID password a few times now and my iPod 4th gen still say apple ID disabled

    I have reset my apple ID password a few times now and my iPod  still says "your apple ID disabled" when I want to download apps....!!!!

    Contact iTunes.
    Apple - Support - iTunes - Contact Us

  • Mac Book Pro i7 - Logging off on its own, night time, power down sleep

    Hi Everyone,
    I have had my Macbook pro for around 4 months now.
    And I have had this problem from the beginning.
    At night, often when I leave my machine, with software open and things active.
    I come back in the morning to find my mac logged off and at the login screen.
    Can anyone suggest what would be causing this?
    I have  MAC OSX 10.6.7
    8GB of DDR3 RAM
    2.8 GHZ Core i7 Processor
    I have tried SMC resets and it doesnt seem to work.
    Any ideas of why my mac book pro might be logging off on its own would be great!
    Thank you.

    Try trashing these 3 .plist preferences and reboot. Reset your Energy Saver preferences.
    HD > Library > Preferences > SystemConfiguration > com.apple.AutoWake.plist & com.apple.PowerManagement.plist  
    User > Library > Preferences > com.apple.systemuiserver.plist
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G + 120G OCZ Vertex 3 SSD Boot HD 

  • Code causing exceptions at its own sweet time and place

    import java.lang.*;
    class newthread implements Runnable
         Thread t;
         int click=0;
         public volatile boolean running=true;
         newthread(int p)
              t=new Thread(this);
              t.setPriority(p);
         void start()
              t.start();
         public void run()
              while(running)
                   click++;
         void start1()
              running=true;
         void stop()
              running=false;     
    class threadpriority2
         public static void main(String argv[])
              newthread ob1=new newthread(Thread.NORM_PRIORITY+2);
              newthread ob2=new newthread(Thread.NORM_PRIORITY-2);
              ob1.start();
              ob2.start();
              try
                   Thread.sleep(5000);
              catch(Exception e)
                   System.out.println("error detected:"+e);
              System.out.println("first one:"+ob1.click);
              System.out.println("first one:"+ob2.click);
              System.out.println("the priority of ob1 is:"+ob1.t.getPriority());
              System.out.println("the priority of ob2 is:"+ob2.t.getPriority());
              ob1.stop();
              ob2.stop();
              ob2.t.setPriority(Thread.NORM_PRIORITY+3);      
              ob1.t.setPriority(Thread.NORM_PRIORITY-3);
              ob1.start1();
              ob2.start1();
              ob1.start();
              ob2.start();
              System.out.println("the priority of ob1 is:"+ob1.t.getPriority());
              System.out.println("the priority of ob2 is:"+ob2.t.getPriority());
              try
                   Thread.sleep(5000);
              catch(Exception e)
                   System.out.println("error detected:"+e);
              ob1.stop();
              ob2.stop();
              System.out.println("first one:"+ob1.click);
              System.out.println("first one:"+ob2.click);
    errors during runtime:
    Exception in thread "main" java.lang.IllegalThreadStateException
    at java.lang.Thread.start(Unknown Source)
    at newthread.start(threadpriority2.java:17)
    at threadpriority2.main(threadpriority2.java:77)
    when i run this code it causes exceptions at its own sweet locations when i run it separately.if once it displays some valid input it would then be followed by the exception
    next time if i run it it will throw exception as soon as i run it at the very start without displaying even an iota of valid data like the previous case
    is ti because the os is placing restrictions on the threads growth or something else.incase there is an error in my code it should atleast pop up the exceptions at one particular loaction in the output and not give different outputs

    1) When you post code, please use and tags as described in Formatting tips on the message entry page. It makes it much easier to read.
    wasnt aware of it.will keep it in mind i post nexttime.sorry for the inconvenience[\b]
    3) You have multiple threads, right? The scheduling of which thread gets how much CPU time when is not subject to your control or prediction, so of course you'll see different timings in subsequent runnings of the same code.[b]actually the problem is not with multiple threads showing different times.whats happening is that exceptions are being thrown randomly at runtime.once when i ran it the exception was displayed at the very beginning of the output and the program snapped.next when i ran it first some output which was slated to be displayed got displayed and then the exceptions appeared in the output.now if the exceptions are thrown at the very beginning its obvious theres some problem at the background coz in the second case that never happened[\b]
    i guess the formatting tips have taken effect[:D]

  • TS2771 my ipod set its own password and now i cant unlock it

    my ipod touch 2 somehow created its own password and I'm locked out.  How do I fix this so I can use my device?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Mac changin preferences to defaults on its own

    Hi.
    I need help please!.. What happens is that my mac is changin preferences all the time without me telling it so. For instance i change the keyboard light to turn off in 1 minute, and a few days later i realize that it was changed back to never. it has also happened with energy saver. I had mine to never sleep or turn off hard disks when connected to energy but today I checked again and sleep was set to 15 minutes and to turn off hard disks when possible.
    Please, what can it be?
    Thanks a lot

    Sounds like the preference file is corrupted.
    Quit System Preferences, then delete this file:
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    Then re-enter your preferences.
    (That may not help with the keyboard light; I'm not sure where that's kept.)

  • HT5661 Hello I have just sold my I phone 4 s on eBay I did a phone reset restoring it to its original factory settings now the person I sold it too is asking for my apple I'd and passwords which I don't want to give out as it has my bank details on. Pleas

    Hello I have just sold my I phone 4s on eBay I did a factory reset restoring it back to its origanal settings ready for next user now they are asking for my passwords and apple i d , which have my bank account details on! What do I need to do please help

    See if the information in this support document helps you. This is in addition to what deggie provided. It explains in a little more detail. http://support.apple.com/kb/TS4515

  • I have changed country (which was a painful process in its own right) and now can't find my purchases, and when I try to download them again (as per the instructions) they no longer are available - how do I get them back??

    Where do I find my hundreds of dollars of downloads I have done since 2005? I move countries for work regularly and now Iphones detect that you are not in the home country and make life very difficult, so you have to either register the new country and download all new songs again (a complete waste of time and energy) or not be able to update the Apps on the phone. Help - there must be an easier way!! (??) I took what I thought was the least painful option and changed country so I could get the apps on my phone, but lost my songs. This is pathetic for a the new Global world we live in...

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • My macbook pro mid 2012 non retna has shut down on its own severla time. I do not know what is causing the problem. Here is a copy of the error report. Please Advise.

    Anonymous UUID:  
    9C671066-2BC8-E27B-D3A4-D412BE7EE736
    Tue Jun 17 18:27:35 2014
    panic(cpu 4 caller 0xffffff80252dbf5e): Kernel trap at 0xffffff821104b6e0, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff821104b6e0, CR3: 0x0000000027d4b000, CR4: 0x00000000001606e0
    RAX: 0x00000000da95f170, RBX: 0xffffff8025236e50, RCX: 0x00000000256a0e90, RDX: 0x0000000000000000
    RSP: 0xffffff8025236e50, RBP: 0xffffff821104bf80, RSI: 0x0000000000000000, RDI: 0xffffff8047aa3780
    R8:  0xffffff8205de5078, R9:  0xffffff8205e60068, R10: 0xffffff821104bd90, R11: 0xffffffffffffffff
    R12: 0xffffff80476ae280, R13: 0xffffff8047b45140, R14: 0xffffff8205de5000, R15: 0xffffff8047b45168
    RFL: 0x0000000000010296, RIP: 0xffffff821104b6e0, CS:  0x0000000000000008, SS:  0x0000000000006e50
    Fault CR2: 0xffffff821104b6e0, Error code: 0x0000000000000011, Fault CPU: 0x4 Kernel NX fault
    Backtrace (CPU 4), Frame : Return Address
    0xffffff821104bc60 : 0xffffff8025222fa9
    0xffffff821104bce0 : 0xffffff80252dbf5e
    0xffffff821104beb0 : 0xffffff80252f3456
    0xffffff821104bed0 : 0xffffff821104b6e0
    0xffffff821104bf80 : 0xda950000
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xda95f170
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13D65
    Kernel version:
    Darwin Kernel Version 13.2.0: Thu Apr 17 23:03:13 PDT 2014; root:xnu-2422.100.13~1/RELEASE_X86_64
    Kernel UUID: ADD73AE6-88B0-32FB-A8BB-4F7C8BE4092E
    Kernel slide:
    0x0000000025000000
    Kernel text base: 0xffffff8025200000
    System model name: MacBookPro9,1 (Mac-4B7AC7E43945597E)
    System uptime in nanoseconds: 48504897868
    last loaded kext at 42431951223: com.apple.driver.AudioAUUC
    1.60 (addr 0xffffff7fa6d5d000, size 32768)
    loaded kexts:
    com.apple.driver.AudioAUUC
    1.60
    com.apple.driver.AppleGraphicsDevicePolicy
    3.5.26
    com.apple.driver.AppleHWSensor
    1.9.5d0
    com.apple.filesystems.ntfs
    3.11
    com.apple.driver.AGPM
    100.14.15
    com.apple.driver.ApplePlatformEnabler
    2.0.9d1
    com.apple.driver.X86PlatformShim
    1.0.0
    com.apple.filesystems.autofs
    3.0
    com.apple.iokit.IOBluetoothSerialManager
    4.2.4f1
    com.apple.driver.AppleMikeyHIDDriver
    124
    com.apple.driver.AppleMikeyDriver
    2.6.1f2
    com.apple.driver.AppleHDAHardwareConfigDriver
    2.6.1f2
    com.apple.driver.AppleHDA
    2.6.1f2
    com.apple.driver.AppleUpstreamUserClient
    3.5.13
    com.apple.GeForce
    8.2.6
    com.apple.iokit.IOUserEthernet
    1.0.0d1
    com.apple.driver.AppleIntelHD4000Graphics
    8.2.6
    com.apple.driver.AppleBacklight
    170.3.5
    com.apple.iokit.IOBluetoothUSBDFU
    4.2.4f1
    com.apple.Dont_Steal_Mac_OS_X
    7.0.0
    com.apple.driver.AppleHWAccess
    1
    com.apple.driver.ACPI_SMC_PlatformPlugin
    1.0.0
    com.apple.driver.AppleMCCSControl
    1.1.12
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
    4.2.4f1
    com.apple.driver.AppleThunderboltIP
    1.1.2
    com.apple.driver.AppleSMCLMU
    2.0.4d1
    com.apple.nvidia.NVDAStartup
    8.2.6
    com.apple.driver.AppleIntelFramebufferCapri
    8.2.6
    com.apple.driver.AppleMuxControl
    3.5.26
    com.apple.driver.SMCMotionSensor
    3.0.4d1
    com.apple.driver.AppleIntelMCEReporter
    104
    com.apple.driver.AppleSMCPDRC
    1.0.0
    com.apple.driver.AppleLPC
    1.7.0
    com.apple.driver.AppleUSBTCButtons
    240.2
    com.apple.driver.AppleIRController
    325.7
    com.apple.driver.AppleUSBTCKeyEventDriver
    240.2
    com.apple.driver.AppleUSBTCKeyboard
    240.2
    com.apple.driver.AppleFileSystemDriver
    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
    1.0.0d1
    com.apple.BootCache
    35
    com.apple.iokit.SCSITaskUserClient
    3.6.6
    com.apple.driver.XsanFilter
    404
    com.apple.iokit.IOAHCIBlockStorage
    2.5.1
    com.apple.driver.AppleSDXC
    1.5.2
    com.apple.iokit.AppleBCM5701Ethernet
    3.8.1b2
    com.apple.driver.AppleUSBHub
    666.4.0
    com.apple.driver.AppleFWOHCI
    5.0.2
    com.apple.driver.AirPort.Brcm4331
    700.20.22
    com.apple.driver.AppleAHCIPort
    3.0.0
    com.apple.driver.AppleUSBEHCI
    660.4.0
    com.apple.driver.AppleUSBXHCI
    677.4.0
    com.apple.driver.AppleSmartBatteryManager
    161.0.0
    com.apple.driver.AppleRTC
    2.0
    com.apple.driver.AppleACPIButtons
    2.0
    com.apple.driver.AppleHPET
    1.8
    com.apple.driver.AppleSMBIOS
    2.1
    com.apple.driver.AppleACPIEC
    2.0
    com.apple.driver.AppleAPIC
    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient
    217.92.1
    com.apple.nke.applicationfirewall
    153
    com.apple.security.quarantine
    3
    com.apple.driver.AppleIntelCPUPowerManagement
    217.92.1
    com.apple.kext.triggers
    1.0
    com.apple.iokit.IOSerialFamily
    10.0.7
    com.apple.driver.DspFuncLib
    2.6.1f2
    com.apple.vecLib.kext
    1.0.0
    com.apple.iokit.IOAudioFamily
    1.9.7fc2
    com.apple.kext.OSvKernDSPLib
    1.14
    com.apple.iokit.IOAcceleratorFamily
    98.20
    com.apple.nvidia.driver.NVDAGK100Hal
    8.2.6
    com.apple.nvidia.driver.NVDAResman
    8.2.6
    com.apple.iokit.IOSurface
    91.1
    com.apple.iokit.IOFireWireIP
    2.2.6
    com.apple.iokit.IOBluetoothFamily
    4.2.4f1
    com.apple.driver.IOPlatformPluginLegacy
    1.0.0
    com.apple.driver.AppleHDAController
    2.6.1f2
    com.apple.iokit.IOHDAFamily
    2.6.1f2
    com.apple.driver.AppleSMBusController
    1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport
    4.2.4f1
    com.apple.iokit.IOAcceleratorFamily2
    98.20
    com.apple.AppleGraphicsDeviceControl
    3.5.26
    com.apple.driver.AppleBacklightExpert
    1.0.4
    com.apple.iokit.IONDRVSupport
    2.4.1
    com.apple.driver.AppleGraphicsControl
    3.5.26
    com.apple.iokit.IOGraphicsFamily
    2.4.1
    com.apple.driver.X86PlatformPlugin
    1.0.0
    com.apple.driver.AppleSMC
    3.1.8
    com.apple.driver.AppleSMBusPCI
    1.0.12d1
    com.apple.driver.IOPlatformPluginFamily
    5.7.0d11
    com.apple.driver.AppleThunderboltEDMSink
    2.1.3
    com.apple.driver.AppleThunderboltDPOutAdapter
    3.1.7
    com.apple.iokit.IOSCSIBlockCommandsDevice
    3.6.6
    com.apple.iokit.IOUSBMassStorageClass
    3.6.0
    com.apple.driver.AppleThunderboltDPInAdapter
    3.1.7
    com.apple.driver.AppleThunderboltDPAdapterFamily
    3.1.7
    com.apple.driver.AppleThunderboltPCIDownAdapter
    1.4.5
    com.apple.driver.AppleUSBMultitouch
    240.9
    com.apple.iokit.IOUSBHIDDriver
    660.4.0
    com.apple.driver.AppleUSBMergeNub
    650.4.0
    com.apple.driver.AppleUSBComposite
    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice
    3.6.6
    com.apple.iokit.IOBDStorageFamily
    1.7
    com.apple.iokit.IODVDStorageFamily
    1.7.1
    com.apple.iokit.IOCDStorageFamily
    1.7.1
    com.apple.iokit.IOAHCISerialATAPI
    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily
    3.6.6
    com.apple.driver.AppleThunderboltNHI
    2.0.1
    com.apple.iokit.IOThunderboltFamily
    3.2.7
    com.apple.iokit.IOEthernetAVBController
    1.0.3b4
    com.apple.driver.mDNSOffloadUserClient
    1.0.1b5
    com.apple.iokit.IOFireWireFamily
    4.5.5
    com.apple.iokit.IO80211Family
    630.35
    com.apple.iokit.IONetworkingFamily
    3.2
    com.apple.iokit.IOUSBUserClient
    660.4.2
    com.apple.iokit.IOAHCIFamily
    2.6.5
    com.apple.iokit.IOUSBFamily
    677.4.0
    com.apple.driver.AppleEFINVRAM
    2.0
    com.apple.driver.AppleEFIRuntime
    2.0
    com.apple.iokit.IOHIDFamily
    2.0.0
    com.apple.iokit.IOSMBusFamily
    1.1
    com.apple.security.sandbox
    278.11
    com.apple.kext.AppleMatch
    1.0.0d1
    com.apple.security.TMSafetyNet
    7
    com.apple.driver.AppleKeyStore
    2
    com.apple.driver.DiskImages
    371.1
    com.apple.iokit.IOStorageFamily
    1.9
    com.apple.iokit.IOReportFamily
    23
    com.apple.driver.AppleFDEKeyStore
    28.30
    com.apple.driver.AppleACPIPlatform
    2.0
    com.apple.iokit.IOPCIFamily
    2.9
    com.apple.iokit.IOACPIFamily
    1.4
    com.apple.kec.corecrypto
    1.0
    com.apple.kec.pthread
    1
    Model: MacBookPro9,1, BootROM MBP91.00D3.B08, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.1f175
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B545331473634485A2D314736453120
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x802C, 0x31364B545331473634485A2D314736453120
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.4f1 13674, 3 services, 15 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: HGST HTS541010A9E680, 1 TB
    Serial ATA Device: MATSHITADVD-R   UJ-8A8
    USB Device: Hub
    USB Device: USB2.0 Hub
    USB Device: USB to ATA/ATAPI bridge
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: IR Receiver
    USB Device: USB Receiver
    Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1

    What happens when you install the original RAM?
    What brand of RAM did you install?
    Ciao.

  • I was updating to 3.6.13 and it was almost finished and it paused on its own and is now stuck there even when I turn my computer off and turn it back on. It doesn' t respond when I hit the resume button. What do I do?

    I got a message screen telling me I needed to update to the latest firefox version. So I proceeded to update to 3.6.13. The update window said it was almost finished with just a few seconds remaining. It was taking a very long time when it got to that point so I minimized that screen and went to do something else. My computer kept freezing up so I went back to the update window to see how it was coming along and noticed it had paused, I tried to hit the resume button but it didn't work. I turned my computer off and turned it back on hoping that I could just start the update over but the same message was there when I went to try to update again. It still said it was almost finished with the previous update and that it was paused. What do I do to correct this?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Printer re-starts on its own from time to time.

    My Photosmart C4680 all-in-one seems to have a connectivity problem.  Without any visible cause, it simply restarts from time to time.  Some times the PC is in use, other times it is not.  The PC generates the usual "device disconnected" and "device activated" sounds when this happens.  I have changed the cable from the printer to the pc and also re-checked the current connections to make sure they are firmly seated.  Any suggestions?

    Better news my charger I was using appears to maybe be part of the thing. I wouldn't work so I got my brothers and it charges so is it possible the old charger was shorting it thus the safety bit killed the power? Maybe the angle is just happen stance.

  • BIG TROUBLE - iMac rebooting on its own each time I try to shut it down

    I just installed Snow Leopard, everything went smooth but when I want to shut down my iMac now, it shuts down but after 5 sec reboots automatically. And I can try as long as I want, still the same, have to physically unplug it to shut it down.
    Please help!

    This problem now has been around for a long time, and I have not seen a solution, except for going back to Leo (not really a solution). If you want to do so, then let me know. As a last resort, I would suggest installing Sno over Sno using an upgrade install. Another with your problem just tried this procedure, but it did not help. So, you are not likely to benefit from the install; it's just that computers are somewhat unpredictable, so what doesn't work for one might work for another. As with any install, be sure you are prepared for the worst and, thus, are well backed up.

  • Why is it when i plug my iphone in to sync it says corrupt file and wants to restore my phone back to factory settings its happened five times now.

    Why is it when i plug my iphone in to sync,i get a corrupt file message cant sync.It wants to reset my phone back to factory settings and i lose all my phone.It has happened 5 times to me now.

    well, you probably have a corrupt file as the message indicates.  You will need to reset your phone back to factory settings as indicated. 
    If you've been using your phone as designed, you've been making frequent backups so that data loss will be minimal, if at all.
    Best,
    GDG

  • HT1925 In what appears to be a random occurrence (its happened 3 times now) itunes will stop working. I am able to open the program, log in, but once I select a movie or show to watch iTunes "stops responding" "freezes"  Help?

    In what appears to be a random occurrence (it has happened at least 3 times) iTunes will "Freeze" I have to shut down the program from the task manager. I am able to open the program, log in, and select an item to watch, once this has been done nothing happens...
    Occasionally, the movie will begin to play only without sound.
    The most recent time this occurred I literally finished a show, went back to the main screen to select another show and it froze.
    Oddly enough, I have noticed that when iTunes acts up so does my shockwave player also...
    Any suggestions? I would appreciate any input, and remember I am a novice....

    This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
    ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
    Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
    If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

Maybe you are looking for