WRT610N storage problem

hi support,
i have an external drive that is connected via usb to my WRT610N router. whenever i access the storage page in my IE 9 browser, i got a blank page and i can no longer connect to my router. i need to power it down to be able to reconnect.
if i access the page without my drive connected, i can access it but there is no option to create a share. i remember some time in the past, i have deleted the default share and now i'm not able to create a new one. i decided to delete the share because it was not a the root of the external drive.
i'm using windows 7 64 bits, with latest firmware installed.
how can i fix this issue and share my external drive?
thank you!

The USB port on the router can be used to connect an external USB hard drive or flash disk. Computers that are connected to the network will be able to access the Shared Drive if they have login credentials such as admin or guest.
NOTE: Before connecting your external USB hard disk to the router’s USB port, make sure your hard disk is already formatted in either NTFS or FAT32 file system using your computer to avoid any difficulties.
Here is the link setting up the Storage feature:http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=e10c7ddf8a62437ca973138d861c545b_17419.xml&pid=80&...

Similar Messages

Storage problem due to error Accessing to DialogRequestQueue in BatchProcessModel

Hi,
   we are using the TS 3.1 BatchProcessModel for an application in a client and we've found an error. Until now they were producing only 2 shifts a day. Since one week they start the third shift implying 7 days/24hours production. After this week they got one message error and TS terminates (I attach the message). This problem is related to the DialogRequestQueue. This Queue is created at the beginning of the BatchModel (Create Dialog Request Queue step) and in the middle of the Batch Loop there's a sequence call step with the name "Wait For TestSockets -- GetUUTSerialNumber" that calls the sequence "ProcessTestSocketRequests". In this sequence there's a step called "Get Next Request" where there's a Dequeu operation.
   The error message that we get seems to be related to a storage problem, something like the Queue is not dequeued and get bigger and bigger, is it?
    Some idea how to repair this problem? Thanks in advance!
Mackemann
Attachments:
Error.JPG ‏98 KB

Hi
it a though task,with out disturbing how can we do.
Ok
Option 1
Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified. so the the transformation get deleted in qulity for the particular source system
OR
Option 2
Manually in the Quality system you can use RS_TRANSTRU_ACTIVATE_ALL in se38
Last optionis creating the deletion request from Development and importin the request.
once this is done in the
Create a new request in the Development , Add the old request which is already transported into the quality before.
in the new request delete the object which are not required and relese it and import that to quality.
now all the status will turn green.
Santosh
Edited by: Santhosh Nagaraj on Nov 14, 2009 4:33 AM

Storage Problem with Zen vP

Hi folks,?I recently got?a Zen vPlus for Christmas, and with only 82 songs, 7 pictures, and [short] video, it appears that all of my 2 GBs are already used up. When I go into 'extras' and 'removable disc', it seems that GB is dedicated just to that, which seems strange because when connecting it to the computer, the 'removable disk U: dri've' appears to have no files on it. Has anybody had similar issues? More importantly, does anyone know what the problem may be with my storage? Surely the 2GBs have not been used up with so few files? After all, it is advertised as being able 000 songs... Many thanks for your help,?- CD

It's not a storage problem, but your Zen has been configured to use gb of its space as removable storage. You can get it all back by going to Extras ---> Removable Disk --> Hold Back Button --> Selecting Disable. You can also switch the capacity, if you want a small portion of your space to be used for non-media files.

Storage problem with ML installation

How can Imnotice if I may not have enough storage for the installation? All went smoothly but after restart I have had white locked screen with windmill for the past thirty minutes and I cannot do anything, nothing moves. Should I try forced restart?

It's not a storage problem, but your Zen has been configured to use gb of its space as removable storage. You can get it all back by going to Extras ---> Removable Disk --> Hold Back Button --> Selecting Disable. You can also switch the capacity, if you want a small portion of your space to be used for non-media files.

I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB avail

I am trying to download a movie from itunes, but ithere's isn't enough room to download. I have a iphone4, have deleted every app possible. Slimmed down photos to hardly anything. I could never update to ios7 because of storage problems. Only 2.5 GB available out of 5GB after deleting everything. I'm also out of town and cannot connect to a computer. I have wifi access though. Help?

Update
OK, Today I went ahead & booted & tried again & it worked this time.
Not sure why it didn't yesterday. Maybe the servers were just overloaded? Several others reported similar.
Also yesterday when I ran Speedtest it showd download at about 25 mbps, This morning just before I re-started the download it was showing just above 30 mbps. So maybe the internet was less busy? Or at least the parts between me & the test server.
& so far it is working ok.

Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems

Can I register a seagate wireless plus external drive as one of my iTunes devices to fix storage problems?

And or use it at the same time my ipod is using a public wifi source for the internet doing my homework?

Will Macbook Air(2012) with 256G storage flash have storage problem

Will Macbook Air (2012) with 256G storage flash have storage problem described in "MacBook Air Flash Storage Drive Replacement Program"?
In the web page http://www.apple.com/support/macbookair-flashdrive/, it says that Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. I wonder whether Macbook Air with 256GB flash storage may come into the same problem?

Welcome to Apple Support Communities
No. 256 GB flash storage does not have that problem. However, it's important that you make backups of your data to keep your files safe

Storage Problems. I recently purchased a Canon Vixia HF G30.

Storage Problems. I recently purchased a Canon Vixia HF G30. I have the most recent updates for FCPX. After importing 59 clips or 120 minutes of AVCHD footage at 59.94 fps/1080 with surround sound I am finding that my files are huge!!!??? Using FCPX editing this footage is eating up a ton of space on both my macbook pro's hard drive (500 gb) and my external drive which is down to 2.78 tb from 3.67.   What am I doing wrong?

Thank you Russ and Bob. This will help me edit the video I took at my nieces wedding. I'm still having trouble
Russ, I m not sure if I chose to optimize at import. However, that is very likely as I had to change the automatic import setting of 23.98p(?) and choose to import at 59.94i 1920/1080 with surround sound audio.
Russ, what setting would you recommend that I import my video at?   I filmed the wedding in AVCHD at 59.94i at 28 mbps.
Do either of you think I should delete the Macintosh HD Projects and Events folder?   Trash my current event and project and start over?
My old events and projects should be ok if I do this right? They are in a separate folder and there is a backup folder as well.
By the way the Macintosh HD Projects and Events folder has 345 GB of data! I have no idea why that is. I cannot figure out how to open that folder to view the content.
I updated FCPX after importing my AVCHD video the night before - I also noticed that when I updated Final Cut Pro X - it created two new folders.... the previously mentioned Macintosh HD Projects and Events folder as well as a Macintosh HD Old Final Cut Projects and Events folder.
As stated previously the Macintosh HD Projects and Events folder has 345 GB of data. The folder for the Old Final Cut Projects and Events is 59 GB - Prior to updating FCPX I had moved all of my FCPX projects and events to my external drive along with my HVR folder which is currently 8.16 GB.
After updating FCPX and prior to joining this support community - I copied/moved both the Macintosh HD Projects and Events folder as well as the Old Final Cut Projects and Events folder along with the HVR Folder to my external drive - then trashed the existing folders on my macbook's hard drive.   when I opened FCPX to continue working on my newest project I got the read box of death on my project's clips and timeline - I was able to relink those files - but I'm still noticing that after continuing to edit - and with a timeline that is only 37 minutes long - I'm down even more GB on my macbook's hard drive as well as my external drive? Most of this data is grouped in "yellow" or other data when I go to view "about this mac" then click on the storage tab.   At the moment the "yellow/other" data is taking up 105 GB on my macbook's drive and climbs quickly as I edit my footage.

Ipon nano 3rd generation red. Sync and storage problems.

I have just got the new iPod nano (product red) 8 GB capacity. When i started to sync with my Intel Macbook i got suprised with a sync and storage problem. It starts syncing and suddendly it stops and lock the iPod and the Itunes. The must surprising is that happens every time the storage capacity reaches about 300 mb of music. Does anybody got this kinf of problem?
I have tried all the solutions I have found: formatting the iPod, connecting on a PC, restoring the factory settings and nothing works.

You'll want to copy what is currently on the Nano to your iTunes library on the laptop. Your iPod can only be synced with one iTunes library at a time. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Nokia belle FP2 c :drive storage problem

i m havin a great problem with nokia 603 belle fp2 device ... I have updated almost 1 n a half years ago ... Since then i facing storage problem in c drive ... Automatically memory vanishes from c drive ... Though I don't install apps in c drive , im facing this problem ! I have to restore my device when memory in the c drive goes low ! Is there any solution ? Please help me ...

Hi shafi4742,
Welcome to the forum!
Aside from the software update, did you install any particular app prior to this issue? Since the issue started after you updated the phone's software to Nokia Belle FP2, you may try reinstalling the SW using Nokia Suite. Just download it on your PC, and then connect the phone via a compatible USB cable. After that, launch Nokia Suite, and then go to SW Updates > Device Software Update > Reinstall current SW. You can download Nokia Suite from this link: Nokia Suite - Download and Support.
Let us know the outcome.

Aperture 3.5 + Mavericks external storage problems

Aperture 3.5 + Mavericks external storage problems
After upgrading to 3.5 and Mavericks, all my projects referencing files stored on NAS show blurry or black and not responding to edit commands. Sometimes Aperture crashes. The projects/photos were okay before upgrade. Also new projects on NAS show blurry or black or fail totally to import photos. If I move the same photos to the local drive, everything is just fine.
I am using NFS to access the NAS.
Reading through this forum I found some reports of similar behavior from people storing photos on USB external drives.
This seems to be only when referencing files located on an external drive. No problems if files are copied to the Aperture library.
Any similar experience?

Referenced files on a NAS was always an gray area. While it worked for most users most of the time it wasn;t clear that Apple supported the configuration.
The Apple documents on Aperture and non-locally attached drives can be read in a number of different ways. Of course the library definitely had to be on a local drive (and even here some users reported success with the library on a NAS) but referenced masters were never explicitly mentioned either way.
Most users had success with the originals on a NAS but even with earlier version of Aperture and the OS there were always the occasional report of problems. When push-came-to -shove if moving the referenced originals to a local drive fixed the problems there wasn;t much else that could be done.
Since the release of 3.5 and Mavericks it does appear that referenced originals on a NAS do not work at all in most cases. The best we can do here, being just users like yourself, is to suggest you contact Apple and try to get through to the Aperture team and see if you can get a definitive answer.
As for problems with referenced originals on locally connected drives, I'm not aware of any widespread problems. In the few cases I've seen it has come down to some issue with the OP's system.
Having your whole workflow and setup knocked out from under you like this is really bad, unfortunately there isn't much anyone here can do for this problem.
regards

WRT610N storage server problems

We are attempting to use a Linksys WRT610N (firmware version 1.00.02 B10) as a network attached storage server on a Windows workgroup. There are two (2) Windows XP Professional workstations and one (1) Windows Vista workstation in the workgroup.
It required a chat session with Linksys technical support just to get the storage server feature to connect. The result was that we had to scale back the number of groups and the number of users, we had to flash the firmware (which we had just done prior to the chat with technical support) and reset the router to factory defaults, requiring a complete reconfiguration of everything from system passwords to wireless keys, etc.
After the chat session with technical support, we have only two (2) shares: “Default” and “employees”. We are using only two (2) groups: “admin” and “employees”. There are two (2) users in the admin group: “Bill” and “Debi” and only one (1) user in the employees group: “Mike”.
With this ‘scaled back’ configuration, the shared resource was available to be mapped under Windows. Each of the workstations in our workgroup reconnects to one of the shares at startup and maps it to a local drive letter. While each of the shares is set up to ‘reconnect at logon’ and ‘remember password’, we almost always have to log in to the share manually after starting up the PC.
The resultant mapped drive is incredibly unreliable and regularly completely unavailable. I have never known a networked resource to behave this unpredictably.
Often, one of us will open a folder, which we know contains numerous folders and files, only to find a subset of the actual contents or no contents whatsoever. They are there; apparently they are just not being displayed. This is evidenced by the fact that, sometimes, navigating up a level and back into the same folder, after a period of time, yields the entire folder’s contents.
Regularly, when attempting to access the ‘B:’ drive, we receive "'B:\' is not accessible, network access denied" or "The folder 'B:\' isn't accessible. The folder may be located in an unavailable location, etc."
At other times, we receive a wide variety of errors when attempting to access this share.
When navigating from the ‘B:’ drive, through two levels of folders, selecting a file and double-clicking same, Excel opens and reports "Could not open 'B:\...'"
When attempting a File->Open operation from within Excel, selecting the file, clicking ‘Open’ we receive the same result. Other times, Excel will report "Access denied, contact your administrator"
When attempting to save a file that has been successfully opened previously, sometimes we receive "Document not saved"
After navigating to an existing file spec., attempting to save over same, being prompted that the file already exists and asked if we want to replace the existing file, we respond ‘yes’ and sometimes receive "The system cannot find the file specified"
Often, waiting a few minutes will allow these problems to clear. In some cases, we are required to re-start the router in order to resolve the problems.
All of these errors are intermittent. If we had a reliable recreation scenario, we would open a problem ticket with technical support. However, these problems do seem to be happening more often as time goes on.
These interruptions are understandably frustrating but, more importantly, our staff is experiencing a significant productivity impact due to the periodic unavailability of our shared files. This impact is becoming a considerable cost to our operation. We are not making unreasonable demands upon this device. We simply want two levels of access to a shared drive for three individuals; this was an advertised feature that influenced our decision to purchase the device.
We have observed these same behaviors using our current drive (a two terabyte Western Digital USB external hard drive) and a sixty-four gigabyte Kingston Data Traveler DT150 pocket USB drive. Inspection of the .storage_info file showed that the firmware had been mismanaging the users and groups. There were remnants of previously removed groups and an instance of a duplicate group (this duplicate group could also be observed through the router’s administration menus). It required a flash of the firmware, a reset to defaults on the router and complete reconfiguration from scratch (with the simplest possible set of groups and users) just to be able to access the two shares.
Perusal of the various Internet forums leads me to believe that this feature was not ready for release in the WRT600N and has not been corrected in the WRT610N. We are obviously one of many customers experiencing similar problems with this aspect of the router. We are thus far very disappointed with this feature of the router and am seriously considering falling back to our previous scheme of shared files on one of the workgroup machines, which worked flawlessly. We would have liked to use the FTP server and external access functions but, as unreliable as the basic share features have been, we dare not even attempt to configure these more advanced features.
In the past, I have associated a certain level of quality and reliability with the Cisco name, however, it troubles me that they have placed their name on this product, if only through the acquisition of Linksys.
At this point, unless someone can offer some miraculous suggestion, I believe we are going to be forced to purchase some other device to meet our requirements. This device came highly recommended by CNET.com (and still does); I will also feel compelled to log onto their site and write a less than favorable review of the device.
Please advise.

Thanks for your suggestion but there are no floppy drives in any of these systems so both 'A' and 'B' appear in the list of available drive letters to be mapped, we have tried a variety of drive letters with the same result (the 'B:' references were just for the sake of examples in the write-up) and we have tried it without any mapped drive letter with the same unreliable results.
Further, I purchased an actual NAS from Western Digital yesterday, installed it and mapped it as the 'B:' drive on all three systems and it works flawlessly, as it should
After telling me to e-mail '[email protected]' and having that address respond to contact: '[email protected]', they responded that Linksys technical support is eliminating e-mail technical support. So, they did not even read the MS-Word document I had created with snapshots of the various error dialogs. Since the problem is intermittent, there is no point to phone or live chat support as it will result in: "well, it seems to work now" and most likely another waste of my time re-flashing the firmware, resetting to factory defaults and completely reconfiguring.
This device DOES NOT do what it claims to. I have wasted far too many hours on what is apparently a terrible firmware release that they do not intend to correct. Our technical support experience has been unacceptable, our new solution works great (thank you, Western Digital) and we will not be purchasing from Linksys again in the future.

WRT610N - Samba Storage Problem with Mac OS X Leopard

Hello there,
I've set up a USB drive to be shared via the router (tried both a fat32 and an NTFS drive). When I login from a windows machine I can use the share point without any problems. When I try to use it from a Mac (mounted via smb://192.168.1.1/sharepoint) I can access the folders and download files. I can even create folders. When I try to copy a file onto the share point (normal file name, small file size) I get an error saying "The operation cannot be completed because you do not have sufficient privileges for some of the items." The console log says: "7/3/09 1:01:06 AM kernel smbfs_composeacl: smbfs_setattr 13, ignored "
If I try to copy the file directly via a terminal window I see this:
Macintosh-3:tc user $ cp ~/test.plist ./
cp: ./test.plist: fchmod failed: Permission denied
As I see it there is a problem with leopard trying to set permissions when copying and the router refusing. Any ideas of how to get this to work?

I found this solution in another link on this web site, I would be curious to know if this works with NTFS also.
Routers and Access Points : Wireless Routers : WRT610 USB Harddisk and Mac osx 10.5 Finally, i got it to work.
Here is my step.
1. Format the external HD with mac with the fat format.
2. plug in the HD to the router.
3. In the storage setting>Administration, create a group named "root" with r/w permission and a user "root" with the group "root. Save the setting.
4. Last, create a share on the drive. Assign the group "root" to it.
Boom! Its work now. I can use it with time machine and share my itune library. Hope this can help someone stuck with this issue.

WRT610N Storage Share Problem

Hi,
I have plugged in a usb disk but cannot see the share on my network.
Also I cannot ping the Router by host name.
Does anyone have any ideas?
Thanks,
Nick

Perform a full reset on the router by pressing the reset button for 30 seconds. Release for 10 seconds and power cycle the router. Reconfigure the router and then download the manual here and follow the instructions for your USB device.

Wireless WRT610N Storage Question - Formats

I just bought the WRT610N router. I have no connection issues what so ever. Everythings been beautiful since startup. The real question is the USB storage option. I have a MyBook 500GB USB drive. It is formatted for the Mac OSX operating system. Is there some reason why the router does not understand this Format? Must i format it to FAT in order to utilize the networking storage option? Any solutions would be greatly appreciated.

It has a problem recognizing formats other than FAT. Which also means you will have a hard (impossible) time storing a file that exceeds 4GB on the attached drive. It will also be incompatible with many backup programs. Hope you didn't really want to use the attached drive for much...
On the WRT600N it will only use FAT, FAT32, or NTFS. However, the FAT32 and NTFS partitions wouldn't function very well. I have heard that the kernel is Linux-based, and if you are familiar with Linux you can bypass some of these issues by using a Linux format.
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

WRT610N storage problem

Similar Messages

Maybe you are looking for