WRT610N UPnP Media Server failing after minutes online

Hi,
I have a WRT610N and I'm having issues with the media server. I have upgraded to the latest firmware and setup sharing and UPnP etc. When I initially plug in my USB hard drive (1TB Seagate Freeagent) it is discoverable by devices on my network (Xbox 306 & Linksys Kiss1600) and I can browse shared media it has indexed. This only lasts for less than 5 mintues, then the WRT610N dissappears from both devices (Xbox & K1600) and I can no longer use the media server.
Disk sharing still works OK, it's only the media server that fails.
Any help would be really appreciated as I'm about to launch it out the window.
Thanks,
James

Are your devices connected to the media server via a cabled or wireless connection ?
If its wireless - then i suspect you have a faulty WRT610, the wireless chipsets inside the WRT610N are well known for overheating and dropping all connections.
Should be pretty stable using a cabled connection though.
Message Edited by vatovey on 07-20-2009 08:35 AM
Currently owning a WRT610N v1

Similar Messages

WRT610N v20090121 Media Server Problem!

Since upgraded to the newfirmware, I was not able to view any video that was on the usb hardrive or flashdisk through my PS3 or PC via UPNP Media Server. I'm able to view or change the file through my network, but I want to be able to stream it to my PC or PS3. I did try to restore to default and configure my settings again after update. Anyone else had the following problems? Please let me know I'm not alone. Now I'm back to prior firmware, at least it's working fine for me.
Please post in this thread if you had the same issue. Thanks.
Message Edited by Sei on 02-12-2009 06:17 PM

You must reset the router and re-configure it after the Upgrade as it is highly recommended, make sure that no hard drive is connected while resetting the router...

Connection to License Server Failed after upgrade to PL45

Hi Experts,
My client is using SAP B1 SP01 PL39, Windows 2003 OS Server. I have recently upgraded the server to PL45 but after the upgrade, the workstations are encountering "Connection to License Server Failed" every time they log to the server.
Our workaround is to go to Server suite Manager> License Manager> settings> click 'set' and the message "The port is now updated....". After which, the workstations can now log to the server.
The problem is we cannot do this workaround everyday. I tried changing the server connection in the server suite manager to: IP no., server name or localhost but still to no avail.
A help from you guys would be very much appreciated.
Thank you.
Edited by: Philip Eller on Jul 2, 2008 9:12 AM

Hi Regelio
As Van mentioned above,the issue may caused by the TAO NT Naming service.
Please check the status of TAO NT Naming service/License Manager
when the issue happens.And in case the error is really caused by
those services,please try to re-install the whole server tools.
Also,if the issue still persists,as another workaround we suggest you to use a simple
batch script to test the Status of the TAO NT naming service,
and restart it when the services was stopped.
Such a script can be launched with windows scheduled every several
minutes.
@echo off
net start find "TAO NT Naming Service"
IF %ERRORLEVEL% EQU 0 (
echo Ok - "TAO NT Naming Service" is running
) ELSE (
echo Error - "TAO NT Naming Service" is not running
net stop "TAO NT Naming Service"
net stop "SAP Business One License Manager 2005"
net start "TAO NT Naming Service"
net start "SAP Business One License Manager 2005"
Regards,
Syn Qin
SAP Business One Forums Team

Wireless Media Server: "Failed To Load Component of Media Serve

When I try to install Wireless Software it always ends up in telling me "Failed to load component of Media Server" after I've restarted the system. Media Server is not running and no icon of Media Server is to be found in the system tray. ?

I am having the same problem. Did you ever get a solution?
I've tried:
uninstalling/reinstalling all the software
forcing exceptions in my firewall (Norton), showing they permit all traffic from the Media Server & Console
assigning a static IP address (my router shows the receiver as connected to the network)
But I still get the "Failed to load component of media server" message every time I log in to Windows or try to start the Media Server manually. When I try to do the receiver's Network Setup (either letting my router assign and address, or with assigning the static address), at first I get the flashing green lights, then just a solid red, with the message that my settings are incorrect. Are those two separate problems, or the same problem?
I am using a 2Wire HomePortal Gateway. The main computer I am attempting to set up through is connected by Ethernet to the gateway. I am using WEP 64-bit encryption with a single key. There are notes about "open" vs "Shared key" modes, but I don't know where to find that info in the HomePortal's settings. I have connected a laptop and a PDA wirelessly with no problems once the key is entered. I can see the receiver on the gateway's summary page of my home network.
Any help is appreciated!

Adobe Media Server failing to record video if switched from play to record midstream

The Adobe Media Server is failing to record video if switched from play to record midstream. It is an intermittent issue that happens randomly one out of every 30 attempts.
Flash Runtime: Flash Player ActiveX 11.7.700.169 or Flash Player ActiveX 11.4.402.287
Media Server: AMS5.0.1, also FMS4.5.5
(The problem happens on both FMS4.5.5 and AMS5.0.1)
The ActionScript is as follows:
netstreamRoger.publish("719_Client","play");
Then 1 second later:
netstreamRoger.publish("719_Client","record");
netstreamRoger is streaming out the video and audio data correctly, because there is another computer playing the stream 719_Client live. So the media server is forwarding the stream correctly when live. The bug is when you attempt to playback 719_Client.flv the file does not contain any video data. The file size is not zero, and the file is not corrupted, but the file size is smaller than it would be if it had saved the video in it.
How do I submit this bug to the Media Server team, and how can I workaround this issue?
Below is the log from the Media Server 5.0.1
publish
stream
2013-05-15
16:14:20
Mountain Daylight Time
719_Client
192.168.2.231
1284
0
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
3189
3486
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
0
0
-1
-1.000000
connect-pending
session
2013-05-15
16:14:20
Mountain Daylight Time
192.168.0.75
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
100
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3073
3073
normal
connect
session
2013-05-15
16:14:20
Mountain Daylight Time
192.168.0.75
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3073
3073
normal
play
stream
2013-05-15
16:14:20
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
3248
3704
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
flv
0
0
0
2
-1
-1.000000
unpublish
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
2
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149021
19922
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
145667
0
-1
-1.000000
publish
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149021
19922
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
0
0
-1
-1.000000
record
stream
2013-05-15
16:14:22
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
0
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
149534
20841
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
C:\Program Files\Adobe\Adobe Media Server 5\applications\uGenius\streams\_definst_\719_Client.flv
flv
13
0.000000
513
0
-1
-1.000000
unpublish
stream
2013-05-15
16:14:28
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
6
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
670945
294048
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
0
0
521832
0
-1
-1.000000
disconnect
session
2013-05-15
16:14:29
Mountain Daylight Time
192.168.2.219
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
9
200
192.168.2.219
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234844082543
671076
294562
normal
stop
stream
2013-05-15
16:14:29
Mountain Daylight Time
719_Client
192.168.2.231
1284
1
10
_defaultRoot_
_defaultVHost_
uGenius
_definst_
9
200
192.168.0.75
rtmp
rtmp://ugfms:1935/uGenius
rtmp://ugfms:1935/uGenius
WIN 11,7,700,169
4702111234860859759
290828
672528
normal
719_Client
rtmp://ugfms:1935/uGenius/719_Client
rtmp://ugfms:1935/uGenius/719_Client
flv
8275
0
665118
3624
2
-1
-1.000000

I'm having this issue as well. Did you ever find a solution to it?

WRT610N + PS3 + Media Server, does it work?

Hi All
New here so please bear with me
A simple question can the WRT610N media Server be seen by a PS3? and if so how?
There seems to be very little detail out there.
Thanks

It absolutely will work. If you are lucky enough to have an external HDD that is seen by the router. A lot of HDD's are not seen anymore since the 1.00.02B10 firmware upgrade. Turn on sharing to the HDD, then enable the media server and it will show up in the PS3's menu.
Have fun!

Media server gone after v1.0.02 E4200

I have been at this for hours now I refomatted the drive 2x and had it back once or twice until I transfer some videos and pictures to the drive then its gone. I have rebooted the router several times and the media server is GONE. FTP uploads and downloads work fine.
I noticed a new Twonkey interface in my webrowser in the short while the media server was working. This is driving me crazy.
please fix the E4200 media server in .02 firmware

I was also able to reproduce this problem and I also saw that it displayed random letters in the media server webpage when using a San Disk USB. I'll let the engineers know
I don't work for Cisco. I'm just here to help.

Authentication on local SQL Server 2008 R2 Express server fails after Lan Manager authentication level changed to "Send NTLMv2 response only\refuse LM & NTLM"

I'm upgrading my organisation's Active Directory environment and I've created a replica of our environment in a test lab.
One medium-priority application uses a SQL server express installation on the same server that the application itself sits on.
The application itself recently broke after I changed the following setting in group policy:
"Send LM & NTLM - use NTLMv2 session security if negotiated"
to
"Send NTLMv2 response only\refuse LM & NTLM"
The main intent was to determine which applications will break if any - I was very surprised when troubleshooting this particular application to find that the issue was actually with SQL Server express itself.
The errors I get are as follows (note that there are hundreds of them, all the same two):
Log Name:      Application
Source:        MSSQL$SQLEXPRESS
Date:          1/19/2015 2:53:28 PM
Event ID:      18452
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          N/A
Computer:      APP1.test.dev
Description:
Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. [CLIENT: 127.0.0.1]
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
   <System>
     <Provider Name="MSSQL$SQLEXPRESS" />
     <EventID Qualifiers="49152">18452</EventID>
     <Level>0</Level>
     <Task>4</Task>
     <Keywords>0x90000000000000</Keywords>
     <TimeCreated SystemTime="2015-01-19T22:53:28.000000000Z" />
     <EventRecordID>37088</EventRecordID>
     <Channel>Application</Channel>
     <Computer>APP1.test.dev</Computer>
     <Security />
   </System>
   <EventData>
     <Data> [CLIENT: 127.0.0.1]</Data>
     <Binary>144800000E00000017000000570053004C004400430054004D00540052004D0053005C00530051004C0045005800500052004500530053000000070000006D00610073007400650072000000</Binary>
   </EventData>
</Event>
Log Name:      Application
Source:        MSSQL$SQLEXPRESS
Date:          1/19/2015 2:53:29 PM
Event ID:      17806
Task Category: Logon
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP1.test.dev
Description:
SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. [CLIENT:
127.0.0.1].
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
   <System>
     <Provider Name="MSSQL$SQLEXPRESS" />
     <EventID Qualifiers="49152">17806</EventID>
     <Level>2</Level>
     <Task>4</Task>
     <Keywords>0x80000000000000</Keywords>
     <TimeCreated SystemTime="2015-01-19T22:53:29.000000000Z" />
     <EventRecordID>37089</EventRecordID>
     <Channel>Application</Channel>
     <Computer>APP1.test.dev</Computer>
     <Security />
   </System>
   <EventData>
     <Data>8009030c</Data>
     <Data>14</Data>
     <Data>AcceptSecurityContext failed. The Windows error code indicates the cause of failure.</Data>
     <Data> [CLIENT: 127.0.0.1]</Data>
     <Binary>8E4500001400000017000000570053004C004400430054004D00540052004D0053005C00530051004C004500580050005200450053005300000000000000</Binary>
   </EventData>
</Event>
All of the documentation that I have followed suggests that the errors are caused by incorrect SPN configuration- I figured that they were never correct and it has always failed over to NTLM in the test environment (I can't look at production - we couldn't
replicate the setup due to special hardware and also RAM considerations), but only NTLMv2 has issues.
So I spent some time troubleshooting this. We have a 2003 forest/domain functional level, so our service accounts can't automatically register the SPN. I delegated the write/read service principle name ACEs in Active Directory. SQL Server
confirms that it is able to register the SPN.
So next I researched more into what is needed for Kerberos to work, and it seems that Kerberos is not used when authenticating with a resource on the same computer:
http://msdn.microsoft.com/en-us/library/ms191153.aspx
In any scenario that the correct username is supplied, "Local connections use NTLM, remote connections use Kerberos". So the above errors are not Kerberos (since it is a local connection it will use NTLM). It makes sense I guess - since
it worked in the past when LM/NTLM were allowed, I don't see how changing the Lan Manager settings would affect Kerberos.
So I guess my question is:
What can I do to fix this? It looks like the SQL server is misconfigured for NTLMv2 (I really doubt it's a problem with the protocol itself...). I have reset the SQL service or the server a number of times. Also - all of my other SQL applications
in the environment work. This specific case where the application is authenticating to a local SQL installation is where I get the failure - works with LAN Manager authentication set to "Send LM & NTLM - use NTLMv2 session security if negotiated",
but not "Send NTLMv2 response only\refuse LM & NTLM".
Note also - this behaviour is identical whether I set the Lan Manager authentication level at the domain or domain controller level in Active Directory - I did initially figure I had set up some kind of mismatch where neither would agree on the authentication
protocol to use but this isn't the case.

Maybe your application doesn't support "Send NTLMv2 response only. Refuse LM & NTLM".
https://support.software.dell.com/zh-cn/foglight/kb/133971

Forms server failing after the first reboot.

Recently installed R12 on XP and was able to add users and responsibilities. after my first reboot of xp i was able to login but not able to start form server. Have tried reinstalling j2se and created mesg folder under forms folder as indicated in one of the post. still getting the error. the log file contents are included below:
09/03/31 10:40:36.734 10.1.3.0.0 Started
09/03/31 10:40:48.515 formsweb: FormsServlet init():
configFileName: D:\oracle\TST\inst\apps\TST_tpad60\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/03/31 10:40:48.843 formsweb: 10.1.3.0.0 Started
09/03/31 11:09:29.609 formsweb: ListenerServlet init()
09/03/31 11:09:39.656 formsweb: Forms session <1> failed during startup: no response from runtime process
09/03/31 11:09:39.671 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:17:20.625 formsweb: Servlet error
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:17:28.859 formsweb: Forms session <2> failed during startup: no response from runtime process
09/03/31 11:17:28.859 formsweb: Forms session <2> exception stack trace:
oracle.forms.engine.RunformException: Forms session <2> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:22:41.531 formsweb: Forms session <3> failed during startup: no response from runtime process
09/03/31 11:22:41.531 formsweb: Forms session <3> exception stack trace:
oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
09/03/31 11:24:17.234 formsweb: 10.1.3.0.0 Stopped
09/03/31 11:27:38.93 10.1.3.0.0 Started
09/03/31 11:27:52.750 formsweb: FormsServlet init():
configFileName: D:\oracle\TST\inst\apps\TST_tpad60\ora/10.1.2/forms/server/appsweb.cfg
testMode: false
09/03/31 11:27:53.31 formsweb: 10.1.3.0.0 Started
09/03/31 11:38:09.62 formsweb: ListenerServlet init()
09/03/31 11:38:13.250 formsweb: Forms session <1> failed during startup: no response from runtime process
09/03/31 11:38:13.250 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
any help?
Thanks,

Hi,
Though XP is not certified, R12 should work on it (I already have R12 running on XP Professional).
Linux should be more stable. Refer to the following document for details about R12 installation on Linux.
Note: 402310.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402310.1
Note: 416305.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (64-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=416305.1
Regards,
Hussein

Logging into the imap server failed after creating OD Master

I should have left things alone....
I have an OD master 10.5 server on the network that my local clients point to. To use the 10.6 server which houses mail as a TimeMachine backup, I created it as another OD master. For some reason (thankfully) my e-mail account is still functioning but the accounts for junkmail, notjunkmail and caught (for server captured junkmail) no longer function. I tried using workgroup manager and deleting the local account "caught" and created a OD account for it giving it mail privileges. Then used sudo chown -R caught caught to recapture the home directory but no luck. I have looked in console and cannot see the issue.
I would appreciate any insight.
Paul

I found the answer. Using Server Admin and connecting to the server I had to allow access to the users for mail services. This worked for the user which I had switched to an OD user and the ones that were local users on the server.
Paul

Linking Cisco Linksys E3000 uPnP media server to non uPnP Home Theater system

Hi,
I have a Cisco Linksys E3000 Wireless Router. My home theater system does not have uPnP capabilities. That is it doesn't have the uPnP client like a PS3 or a Wii.
Is there a uPnP client that I can buy for the specific purpose of connecting to my home theater system via ethernet.
The resulting connection graph will be as follows: NAS (via USB) to E3000, E3000 to uPnP client (using ethernet), uPnP client to Home Theater system using audio in or HDMI.
Thanks for your help!

If your Home Theater system has Ethernet port then I think you can try wireless bridge ( WET610N ) to make it wireless.

WRT610N after firmware upgrade lost connection to USB storage en Twonky media server not working

Hi,
I had firmware 1.00.00.B18 running on my WRT610N. I had successfully connected a 1.5Tb USB disk to the router and The UPnP media server (Twonky Media server 4.4) was running OK. Except that the Media Server sometimes had problems with its license key.
I read somerwhere on this forum that a firmwareupgrade would help so I installed 1.00.03.B15.
Since then the router will not see my harddisk anymore and the media server also has vanished. Access thrue http://192.168.1.1:9000/ to the Twonky server shows now "page not found".
The 1.5Tb disk is FAT32 formatted. I tried a smaller USB disk and supprisingly that one is recognized by the router. I ran several Harddisk test and repair programs on the 1.5Tb and they show no faults.
The only thing I have not yet tried is resetting the router.
Can you help?

I have followed the reset procedure but the situation stays the same.
Message Edited by ppvanaelst on 03-13-2010 06:16 AM

Linksys Wireless WRT610 media server issue, help appreciated.

Since I bought this router, the media server had been working okay.
suddenly one morning it stopped working and giving this message.
Trial expired, please visit http://twonkyvision.com
I called Linksys customer support, (which is not 'engineering dept' by the way, someone in Phillipins)
they had no clue what a UPnP media server is, and what twonky is ?
Linksys routers come preinstalled with twonkyvision media server software, but this one stopped working.
Any help ?

I've been havin the same troubles but i think i might have finally gotten it to work. TwonkyMedia is preinstalled on Linksys WRT610N and the "new" tab they created called "storage" interprets TwonkyMedia's actual media server pages into the Linksys configuration style.
Type in your browser http://your-router-iport/
Just like this http://192.168.0.1:9000/
It takes you to the actual TwonkyMedia setup pages in which Linksys hides from you. Click on the "Clients/Security" link in the left navigation area. I noticed that although it was set to allow new clients automatically, the client table was actually missing my Xbox 360 and PS3 as well as their static ip's.
Once i added them it worked again (cross my fingers). I can't wait until DD-WRT comes out with new custom firmware for this Linksys router. Its been good to me for awhile now but i hope this isn't a start of things going wrong with the router.

What Media Server software is used in in stock WRT1900AC FW?

I'm having issues with my BluRay Player streaming movies from my router and wondered if someone could let me know some info about the DLNA/uPNP media server that's used by the WRT1900AC on stock FW.
I belive it's a version of Twonky, please can anyone provide any more info?
Regards

You might ask Chadster, he may know...

WRT 610N and media server

On all PC's (4 Windows 7 Ultimate),XBox and PS3 is shows the media server but it says there is no media ! I have an external 40GB HDD connected to the USB port om the router and can connect to the drive. I have the latest firmware installed on the router, where am i going wrong ?

When you go to the storage tab @ 192.168.1.1 (aka advanced settings) is UPnP Media server enabled and have you specified a folder for it to scan?
By the way, what file types are stored on it?
I don't work for Cisco. I'm just here to help.

WRT610N UPnP Media Server failing after minutes online

Similar Messages

Maybe you are looking for