WRT610N v1 Problem after uploading wrong firmware

Hello
I thought to upgrade my WRT610 wireless modem with the latest image. Unfortunately I believe I had a version2, and download the latest firmware of this version.
After uploading the firmware it doesn't pop-up with a screen that the image was successful and after waiting 30 min. I reboot the router.
Now the router initialization fails (power light is flashing) and I find out that I have a WRT610 version 1 router.
Reset to factory default with pushing the reset button for 30 sec and turn off the power for the same amount of time doesn't solve the problem. I can't access the GUI to configure the modem. I can ping the default ip-address 192.168.1.1.
Can somebody inform me if it's possible to access this modem in ROM-mode with telnet or ssh to uploade the correct firmware via ftp? Such a the big brother Cisco routers?
Thanks
Regards Ronald

Upgrading router's firmware with wrong version can damage the router.As the Power light blinking on the router,
You may try upgrading the router's firmware using TFTP utility....Download 44.3 KB the tftp utility and save it on the dekstop....
Follow these steps to upgrade the firmware on the device : -
Double click the TFTP.exe file and click run.
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router's password is admin.
For File- Click the triple ??? button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the
progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router if the power light stable....if the power light still kept blinking then router will not work

Similar Messages

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password.
Any DEFAULT Password so that i can unlock the settings menu.

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Camera problems after updating 8100 Firmware to v4.5

Hi All
This is a known issue to me as I update all our work handsets with Blackberry firmware for the company I work for.
After updating the firmware on several handsets to the latest 4.5 version of the Blackberry 8100 there is a problem with the camera.
When you are in view mode and outside (even whilst overcast) the screen goes white as if the aperture for the lens is open wide.
Even when you take the picture the result is whiteness everywhere.
Please see examples here:
http://www.imagedump.com/index.cgi?pick=get&tp=540100
and
http://www.imagedump.com/index.cgi?pick=get&tp=540101
Both of these pictures were taken indoors with just flourescent lights on.
However if I return the firmware to a lower level the problem no longer exists.
I have tried changing the white Balance settings on the handset and no matter which setting I put it on the same results occure.
I was wondering if there is a patch or do I have to wait for the next version for a bug fix?
Thanks for your help in advance.
Gadget
Solved!
Go to Solution.

Upgraded the handset software to 4.5.0.55 and the camera problem no longer exists.
Can I get Kudos for solving the problem myself?? LOL
Gadget

My problem after N73 New firmware

Dear All
V 4.0727.2.2.1
Hello
i have a problem after i pdate my firmware for Nokia N73
the problem is: before When I started to make a call the counter appear on the screen and when the other side open the line the counter start the count the time. This is useful to see the call time during the call process
But after the new firmware I did not find this service and I can not fix it.
How I can fix it?
Also, how I can back to the old firmware?
Is there a program to do the same service?

That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Cannot see my printer after install wrong firmware

i have a problem
my printer (laserjet cp1525n color) give me a message firmware corrupted ready 2 download
i tried to install the firmware but the printer stuck on erasing proccess
and i noticed that the printer represent as laserjet 3020 on device and printer window on my computer
after that i installed firmware for the printer laserjet 3020 on my printer laserjet cp1525n color
i noticed that the update firmware completed and then i restart the printer
but nothing appear on printer screen
and i cant detect the printer when i put usb cable
please help me

Hello @A-joudeh,
Welcome to the HP Support Forums!
I understand that while attempting to update the Firmware on your HP LaserJet Pro CP1525nw Color Printer you ran into issues and ultimately ended up loading the commerical HP Laserjet 3020 All-in-One Printer firmware on your consumer HP Laserjet Pro CP1525nw Printer. In doing this you have corrupted your printers programming. Unfortunately, when this occurs you are left with a unresponsive product that will need to be replaced.
At this time, due to the programming hardware failure of your product I recommend that you contact our Technical Support queue by phone to explore additional replacement options.
HP Technical Support can be reached at: 800-474-6836.
If you live outside the US/Canada Region, please click the link below to get the support number for your region.
HP Worldwide Contact
I wish you luck. Have a Happy New Year!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Problem after update the firmware

I have Imac isight 20inch. After the imac update the new firmware, the apple screen is black. Althought, I can hear the sound of fan working, the white ligh, but nothing is on screen. Anybody know about that problem? Any solution will be appreciate!

To Apple Discussions!
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
Have you tried any of the recommendations already mentioned in this thread?
=============
Never post your email address in a public forum. Spam bots roam public forums looking for "spam victims".
If you insist on using your email address in a public forum & you want to "trick" the spam bots, then suggest that instead of using "@ "in the email address, use instead the actual word AT.
Regarding responding to your emal addy, we ask that you post all questions to the appropriate discussion forum. This allows other users and other helpers to have a chance to view and respond to your post. That way, everyone benefits from the exchange.
Thank you

Nokia 6500 slide problem after updated to firmware...

Hi, I have recently updated my nokia 6500 slide with the latest firmware version 9.40. I realise that after the upgrade, my phone encounters problem reading the SD memory card. It happens intermittently, sometimes you see, sometimes you don't. Initially I thought it was due to my memory card but after replacing it with a new one, problem still occurs.

It looks like something on your system caused the updater to crash.
Unfortunately your only option for that model is to take it to a nokia care point for repair. Tere's nothing else that you can do for it.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Serious problems after upgrade to firmware 5.1

Hi, I have uploaded firmware 5.1. to my iPhone 4 and ever since the phone crashes frequently and goes into "repairmode".....I only get to restart it pressing Home and "On" Button for longer....I tried setting it up as new iPhone but problem continues...anybody any idea? Best iFitch55

You're welcome.
An iOS update cannot cause a hardware failure. It can bring an underlying and unknown problem to the surface but not cause it.
If this were possible and the update caused this for many iPhone 4 users, the habitual whiners would be here in droves. If someone else did experience the same, this would change or do what for you?

Problem after updating to Firmware 2.2.1

Hi.
I am having a huge problem with my iPhone, I have just updated my iPhone to 2.2.1 when I had problems with the SMS because I could not even type anything as "N" kept pressing Enter but I am not touching Enter, so I had to reset and restore it with 2.2.1.
After restoring and syncing the iPhone with my Songs, Videos, Pictures, etc... my iPhone prompted that my iPhone is activated so I dismissed the message, and slided the 'slide to unlock' and got to the Home Menu, this message about the:
*Edit Home Screen*
*To rearrange icons, touch and hold any icon until it starts to wiggle, then drag icons to desired locations.*
*Drag an icon to the far right to create additional Home screens.*
*Press the Home button when done.*
I got this prompted up, so I tried to dismiss it, but I couldn't even dismiss it, I can't even press the 'Dismiss' button.
I restored the iPhone again, it is still not working ... what should I do?
Please help me to let me follow easily.

Hi Wayne,
If there is a protective case or film on the iPhone, try testing without it.
Also, try the general touchscreen troubleshooting tips in this article: http://support.apple.com/kb/HT1650?locale=en_GB#faq5
If the issue persists, the iPhone may need hardware repair. Make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/uk/retail/geniusbar/
U.K. iPhone, iPod and Mac technical support: 0870 876 0753
-Jason

Problems after updating to firmware 3.0

Hi all,
On wednesday I had updated to version 3.0 for my iPod touch 2G. I could see comparing to other touch 2G (v 2.2.1) that WIFI connection is very slow into YouTube, Safari, AppStore and all apps that uses WIFI connection.
When I look at Setup -> General -> Information I could see my MAC Address so, problems that have other people on forums is not my problem.
Do Anyone have a solution? or I have to wait to another firmware update.
Thanks a lot

There are a couple of things you can do:
1. Reboot your router
2. Reset your network settings
3. Under the settings for the network you are connected to, change your proxy settings to Auto.
WiFi isn't really slower under 3.0 (at least not on my network) so try those things out.

Z10,Q10 & Z30 slow restart problem after update to firmware 10.2.1.1925

Hi, I have just updated our blackberry Q10 and Z30 to new firmware, which is fantastic! I point out a problem, probably a small software bug.When I turn on the Blackberry reboot is really slow and spend a few minutes before I was prompted to enter the PIN code of the SIM card.The problem is the pin code of the SIM card: If you take this option, restart will be as fast as before! I hope that will be soon released an update that resolves this problem.Thank You Hello.

Thanks for clarifying, hopefully someone from BlackBerry will pick this up and it will be fixed in a future release.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

N73 - Another Problem after upgrade the firmware t...

Except the slow contact search problem (solved by Unplug the battery), I still suffered from some application install problems.
1. Whenever I restart the phone, a message 'Installing' always poped up, and the phone not responding for around 2-3 minutes. And then an error message 'Unable to complete ....' prompted.
2. The K-Mobile Client application losted after upgrade, and I tried to reinstall it , but resulted error by 'File corrupted'

Usually that annoying installation process in the beginning can be removed by deleting that installation file in MMC>\Private\10202dce . Most of them does not have the real title of the application. To delete the right one, you need to go to the application manager first and look at the title of the application that cannot be installed nor removed. Ones you know the titles, plug in ur phone to ur computer and browse MMC>\Private\10202dce , some title of the applications from the application manager should be listed there. Delete whatever you find is listed "not installed" in application manager (app cannot be installed or removed), but first make sure to make a backup of it somehow just in case you make an error. After you delete the file/files restart ur phone. The annoying installation process should not appear anymore. Note that by just removing that file may not fully remove the files it created. For advice, if you install applications in ur phone make sure you have backup of them stored in ur computer so that if the installed applications in ur phone stops working properly all you need to do is to reinstall using the original/backup sis files.
- Is this a Signature? -

N82 battery problem after update to firmware 30.0....

I Have my n82 since August and after the update the battery live it´s only for one day. Any idea why?
PS. Before the update the battery live was normal.

here are the test. If i play N-Gage non stop on v30, n v20 firmware. On v30 firmware the battery after 1 hours n 30 odd mins it will say battery low then battery bar will go backup to 3 bars lol. then after 20 more mins it will die out. Where as v20 i can play ngage non stop for about nearly 3 hours. Do remember ngage games with sound n display brightness is at the lowest. Both on each n82.
What I have found...
V31 - Battery not good
V30 - Battrey acts weird saying battery low then it goes back up to 3 bars lol. mysterious charging lol
V20 - Battery just great
V11 - Battery rubbish
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

N82 browser problem after update to firmware 30.0....

hello everybody.
Yesterday I upgraded my N82 to firmware 30.0.019
Now I have a problem with the browser.
Actually all page links are displayed blank (without their title).
Any idea?
Solved!
Go to Solution.

02-Oct-2008 12:16 PM
nizo wrote:
Wow!
you are the man!!!
how did you know man?
Actually it's just what you said. I have installed the quran application from the Nokia website in the same day that I upgraded the firmware. Now I removed the application and the browser is working well.
Thank you very much.
Bro, you don't have to uninstall Quran application, just do this :
-download the new Quran application (no more font problem in nokia default browser, they solved it)
OR
-copy all fonts in z:\resources\Fonts to c:\resources\Fonts (create the folder if it doesn't exist) and then reboot your phone (note: your phone must hacked, so the C drive is writable)

2 problems after uploading site to server

I posted earlier but don't think I was very clear. I built a site in Iweb. It works perfect and displays perfect in Safari.
With Explorer 3 things are happening. 1) my quicktime movie is not pulling up, not even the symbol or the place holder. 2) i have a contact form that I got through wufoo and the only thing that shows up is the title and the submit button, none of the questions. 3) the iweb nav bar is not showing up?
Ive gotten several calls from people about this because I advertise on google. Some have no problem, a lot do. Is this a Iweb uncompatability issue? I just called godaddy where its hosted and he said he was able to pull it up.
the site is www.tv750.com i am totally new to building sites and hosting so I very well may have screwed something up. I changed the html code "height" for the wufoo form as they suggested but still the same problem. so frusturating.

Here's a method I used for an iPod transfer to a new PC.
Look at your Windows Desktop and create a new folder called ipodbackup. Right click and choose, New > Folder, then rename it to ipodbackup
Now go to iTunes Preferences and check the following options:
'Keep iTunes music folder organized'
'Copy files to iTunes Music Folder when adding to Library'
Now double-click on 'My Computer' from the windows desktop
Choose, Tools > Folder Options, Select View Tab
Choose the option 'Show Hidden files and folders', choose OK
Now from 'My Computer' right click on the disk icon for your iPod, select COPY
Now from the 'My Computer' icon, open the folder on the desktop called ipodbackup, then right-click and choose PASTE
Wait for all you iPod data to copy onto the computer.
Open iTunes, (make sure the earlier Prefs are set as I said!)
Choose File > 'Add Folder to Library' Select the 'ipodbackup' folder from the Windows Desktop
Wait for iTunes to finish transferring all the data in the iTunes Library on the new PC.
Check though the Library to confirm all albums/tracks are there.
Playlists didn't get rebuild by the way.
After everything looks good, you can delete the 'ipodbackup' folder on the Windows Desktop and SYNC the iPod to the new iTunes Library.
Seasons Greeting
LG

WRT610N v1 Problem after uploading wrong firmware

Similar Messages

Maybe you are looking for