WRT610N v2 - Dropped signal after macbook goes to sleep

Hi there,
My wireless G macbook drops the signal after it wakes from sleep mode. I also have a similar issue with my PC and the WUSB600N but I believe that one is the adapter issue. Can you think of any reasons why this would occur? Troubleshooting?

Is your Mac computer is wired or wireless...?
open the router setup page and Under the Wireless tab,Click on Advanced Wireless Settings..Change the Beacon Interval to 75,Change the Fragmentation Threshold to 2304,Change the RTS Threshold to 2304 and Click on Save Settings... Now,check.
As far as the WUSB600N is concerned,try updating the driver for that.

Similar Messages

Since update download monitor shows "No Signal" and "Monitor Going to Sleep" over and over

I have an HP w2072a Monitor and a Pavillion p7-1436s computer. I run Windows 8. Since downloading an update yesterday, I cannot get my monitor to work. I have unplugged it, plugged it in, tried another monitor, tried another cable, turned the computer off and on several times, played with the sleep button, tried all the buttons on the monitor--nothing works. If I hit the "On" button, the light turns to blue briefly, I get the screen showing "No signal" then "Monitor Going to Sleep" comes up and the light turns amber---over and over again. Could this be related to the update I received? I think the update said it was setting a restore point, but with no monitor, I am stuck!

Hi dianthus,
Sorry to hear about the issue after doing the update. Do you recall what the update was for? I have included a document regarding your issue.
Computer Starts but Monitor Remains Blank Windows 8:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03518095&tmp_task=solveCategory&cc=us&dlc=en&la...
Give those step a try and let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

I have my AIR plugged into another monitor and after it goes to sleep sometimes it sounds like the system is running and it will not come back up.. I have to restart it. What is this.. Please help

I have a macbook air and i have it hooked to another monitor and I love it but lately it has after it goes to sleep for a while it sounds like it is trying to run the drive or fan really hard and when I try to bring it alive it does not come back to life so I have to hard boot it and then restart it. What is this...

Go into Sys. Pref , and power settings and UNcheck "put hard disks to sleep" on both power tab and battery tab.
When on projector use with your Air and a presentation, dont close the monitor or sleep your Air.
Verify any coincident applications running that can/could conflict with projector / sleep occurrence by running Etrecheck:
report back on same
http://www.etresoft.com/etrecheck
EtreCheck is a simple little app to display the important details of your system configuration and allow you to copy that information to the Clipboard. It is meant to be used with Apple Support Communities to help people help you with your Mac. EtreCheck automatically removes any personally identifiable information from the output.

Macbook goes to sleep every 2-5 seconds

I recently had water damage to my macbook and decided to take it into my own hands and fix it. I took the topcase off and let everything dry, put it back together, and it started to work again. A day later my macbook started acting up and would fall asleep every 2 seconds to the point where i couldn't fully boot my computer.
Has anyone had this problem? And if so, what did you do to fix it?

Thanks kdd,
If only it would fully boot into the hardware test without the screen turning off or the MacBook going to sleep!
I should probably add- A few months ago I changed the Keyboard/ Trackpad assembly and the sleep status light stopped working. Then about a week before this happened, the MacBook stopped sleeping after the lid was closed.
I'm also noticing now, that the screen backlight turns off for a few seconds before sleeping- this may just be the normal sleep procedure.
Does anyone know the part that controls the sensor of closing the lid on the MacBook? I have a feeling that is what's screwy and needs to be replaced. Is it some type of magnetic sensor?

When my macbook goes to sleep from non activity when I return the wifi is not on. When trying to log back onto my hub it says it is out of time and I have to reboot each time. Most annoying, any solutions please?

When my macbook goes to sleep from non activity when I return the wifi is not on. When trying to log back onto my hub it says it is out of time and I have to reboot each time. Most annoying, any solutions please?

If you are not using data and the iPhone goes to sleep, it will automatically drop the wi-fi, and will not reconnect until you wake the phone up. That is the way it is designed. The only way around that is to turn off cellular data while at home and on wi-fi.
Cannot answer the xbox question since this is an iPhone forum and I would have no idea.

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?

Why does my iphone 3gs screen go white after it goes "to sleep" for the first time after turning it on?
The screen isn't broken because it works after i turn the device off and back on, but after it goes black once, it's only white again.
But it takes the touches although it's only white, because I can answer my phone when I slide my finger on the bottom of the screen, eventhough there in not the button to see.
This is so weird. I have already done everything I can think of that might help. But I cannot think of anything that might be causing it, because nothing has happened to the device.

Let me know if I should start a new discussion instead of opening a new topic here.
My wife's iPhone is the same vintage as mine 3Gs, but has never had the battery problem. Its affliction instead is that it cannot detect WiFi networks unless it is quite close to the source. Often, when my iPhone not only detects but shows a maximum cells connection with a network, hers cannot detect the network at all. In contrast, her iPhone seems to detect ourcellular carrier just as well as mine does.
Is there any help for this affliction?

Request to Mods. re: Yoga Tablet pro 2 not wakeable after it goes to sleep

We have a number of posts regarding the Yoga Tablet Pro 2 going to sleep and not waking up. Can we get some kind of confirmation that this is actively being worked on or passed along? I feel most of us have tried to do a factory reset, for some it's worked for a time, others (such as myself) this has not worked at all. It is not a battery issue because when you hard power off the device and repower it back on, the battery still shows maybe a few percent less than when the device went to sleep.
I do know this is frustrating me and I'm tempted to walk away from this tablet for that reason.
Perhaps we can get a confirmation that this has been passed up the chain or any kind of other "official" recommendations to try. It's not fun having to come back to my tablet after it goes to sleep and having to hard power it off and then repower it back on - every 5th or 6th time.
Thank you,
Dan

I am bumping this. I'd like to see one thread or a sticky on this topic. There are too many threads on this issue and some of us are repeating the same information. I'd also like to know if any work is being done by Lenovo on this issue. The Factory reset seemed to work for a 2 weeks and now my tablet is back to sleeping and not waking.
If someone stumbles on this, the North American Number for Lenovo Tech Support is:
877-453-8686
If you call, Remind them that the Factory reset does not work.
Dont forget to be courteous!

Is itunes store down its 9:36 date is saterday march 24 and im trying to download a app and up date a app and after it goes to sleep and i come back on to my ipod touch 4th gen it make me type in my pass word so basicly its not donlading

is itunes store down its 9:36 date is saterday march 24 and im trying to download a app and up date a app and after it goes to sleep and i come back on to my ipod touch 4th gen it make me type in my pass word so basicly its not donlading

Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

Windows 7 Does Not Respond after it goes to sleep

We are using Windows 7 image distribution through SCCM for our entire organization. Lately, I came across this issue, now becoming more common on all
the systems. The computer won't wake up from sleep by pressing any key, if left unattended for more that 30 Mins (rather after it goes to sleep). A forced Restart is then necessary to return everything to normal. We are using Dell Latitude E series laptops,
as a standard all throughout our organization.
Already tried lot of option like - upgrading the drivers, changing the power plans etc. However, neither of them worked. Any suggestions in this regard
are highly appreciated.
Thanks,
Sam

These type of issues can be solved by performing a startup repair.
http://windows.microsoft.com/is-is/windows7/products/features/startup-repair
additionally this may be helpful
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01853693
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-your-computer-cannot-come-out-of/20ffb7a3-7f0c-46f9-8516-c1e31b11e558
Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

Log in screen appear after Mac goes to sleep even if screen lock is turned off.

Log in screen appear after Mac goes to sleep even if screen lock is turned off. This happens usually but not always. Using Yosemite, 2 year old iMac. This has only started to occur recently and it happened in Mavericks also.

Howdy stkh,
You may want to check the General pane of the Security & Privacy System preferences to make sure that the Require password...after sleep or screen saver begins is not checked. See this article for reference -
OS X Yosemite: General pane of Security & Privacy preferences
Thanks for using Apple Support Communities.
Best,
Brett L

My iMac logon screen locks up after it goes to sleep

my iMac log on screen locks up no mouse control after it goes to sleep when I turn it on by hitting the spacebar I have to reboot Iam running the latest softwear

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Internet goes stale after computer goes to sleep and then needs to be rebooted to function properly

I mac with retina 5k display
internet goes stale after computer goes to sleep and then needs to be rebooted to get it working again
10.10.1 os

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Fans go on at full speed 1 min. after computer goes to sleep

Problem: Fans go to full speed 1 min. after it goes to sleep-mode. The fans will stay on until it wakes up from sleep-mode.
Computer: Apple Power Mac G5 Dual 2.3, OS 10.4.9, 4.5 GB RAM. 2 HD, late 2005 version.
The problem happens every time I put it to sleep, even right after it has been turned on.
I have measured the CPU temp to be as low as 36-40C and it will still turn the fans on high speed when put to sleep.
I have reset the P-RAM and the SMU.
I have installed a fresh version of OS 10.4.9 on second drive, booted from it and it still turn the fans on 1 minute after it goes to sleep.
I have had all the RAM out beside the original RAM. I did an extended Apple Hardware test which passed.
...any ideas ?
-e
5 Macs in total Mac OS X (10.4.9)

After trying all that, it sounds like it's hardware-related--possible logic board--but try this yet.
Do an Open Firmware reset: Hold the CommandOption+OF keys during startup. At the '>' prompt type:
>reset-nvram
Return
>set-defaults
Return
>reset-all
Return
The reason the fans are taking off, is because the OS stops communicating with the logic board.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

MacBook Pro won't turn on after it goes to sleep

Everytime I fold it and it goes to sleep and re-open it, it doesn't turn on. I have to hold the power button and turn it on and off for about 15 minutes before it finally comes on. The battery is 100% charged and I got my MacBook Pro only a couple of months ago. The only other problem is ther everytime I restarted my computer, every desktop background automaticly reverts back to the first one. If anyone can tell me whats wrong please help.

Run through this list of fixes
Step by Step to fix your Mac
You can do this to copy and remove files from the non booting internal
Create a data recovery/undelete external boot drive

MacBook Pro 13" (2011) will not wake up after it goes to sleep.

My new MacBook Pro goes to sleep like normal and then when I try to turn it back on the screen just stays black. I have turned off the put hard drive to sleep button and it is still doing it.

@hinote80: I ran into a wake problem with my new 17" MacBook Pro (early 2011). At first, I did the shutdown via the power button and then a restart, but that wasn't something I wanted to keep doing. I had also tried tapping on various keys on the keyboard but none of them seemed to wake it up (that approach always worked on my nearly 6-year-old PowerBook). I also tried moving around the Bluetooth Mighty Mouse (that I have paired with the MBP laptop) but that didn't work either.
While searching for another approach, I happened to click once on the mouse and that seemed to wake up the laptop everytime. So, now I'm doing that. If you don't have a mouse, maybe just tapping the scrollpad once (as if doing a click) would have the same effect. worth a try.
- David (your mileage may vary) PwrMc
:::::: if this doesn't work, then it was my evil twin who posted this!   ::::::::::
PS: @Baby Boomer: I love that bug creature crawling around on your sig!

WRT610N v2 - Dropped signal after macbook goes to sleep

Similar Messages

Maybe you are looking for