WRT610N wireless needs reboot

I have a WRT610N V1 w/ the latest firmware Ver.1.00.03.15. The wired connection works great so far. The wireless connection works well also, that is, when I can connect. The problem is that I have to reboot the router every couple of days to be able to connect to it wirelessly. Once connected, it works fine. But if I disconnect and come back the next day, chances are I have to wire up and reboot the router. Any ideas on how to fix this? Thanks.

As you already have a latest firmware installed on your Router, Have you tried to reset your Router and re-configured all the settings back on your Router from the scratch?
On your Router setup page, click on the Wireless Tab and under 2.4GHz Wireless Settings change the Radio Band to Standard- 20Mhz Channel, and below change the Standard Channel to 11 and click on Save Settings.
Once you are back to the same page, Then you need to click on the Sub tab under Wireless "Advance Wireless Settings" and under 2.4GHz Wireless Settings Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now try to connect to your Wireless Network and check if you are facing the Same Problem.

Similar Messages

WRT610N keeps needing to be reset

Hi,
My WRT610N wireless router keeps needing to be reset to be able to connect to the internet. I updated the firmware about two weeks ago and things were going great again until a day or so ago, then it started cutting out multiple times a day. I checked and there doesnt seem to be any new firmware, so now I'm at a loss as to what I need to do to fix this.
I have 3-4 computers connecting to it at a time (1 xp pc, 1 vista pc, 1-2 laptops with vista i think). Even when its just the two pcs using it, it stll disconnects.
One thing to note that has happened multiple times: the two pc's both have everquest 2 running on them, and it seems when one is logged into the game, and the other starts to log in to them (it will almost be logged in, on a loading game resources screen) the wireless router will need to be reset. This has happened enough times to make me think theres something to it.
Also, there have been a couple times when after resetting and getting it working, there will be a message that pops up about having conflicting ips, then that message goes away.

I think it a problem with firmware of your Router, you need to upgrade the firmware of your Router..
Go to website linksysbycisco.com/downloads.........insert model no of your router in search tab......select proper version of your router........download the firmware file......save that file on desktop
Firmware Upgrade/Reflash
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
Open AirPort Utility, select the Time Capsule, and click Manual Setup
Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
Next, click the Wireless tab located to the right of the Time Capsule tab
Change the setting for Wireless Mode to Off
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
You are all set

Apple mac g5 needs rebooting from cd but it doesnt recognize the wired keyboard so i cannot give the computer any commands

my apple mac g5 needs rebooting due to me clearing the whole system, however the tower nolonger recognizes the wired keyboard,
so i cannot use the c key to boot from disk.

By rebooting do you mean reinstalling the Mac OS?
You may have to use another keyboard (preferably an Apple one) but also make sure the basics are correct, such as solid connection, not using a USB hub for the keyboard etc. Also plug the keyboard into the back of the G5 (not sure why this works but it does).

WRT610N wireless keeps disconnecting + Need Firmware info?

My Linksys WRT610N recently started having the issue of continuosly disconnecting the wireless connection every 30 seconds or so. I did a power recycle but that did not help.
The router's firmware version is 2.00.00 B50 . I tried searching for the latest firmware on the linksys site but I get to is 88MB download package for installation which doesn't even indicate if the Firmware file is part of the package and what the firmware version is in the package. I'm not sure why it is difficult to find this very simple inforation.
If anyone can point me to solution for the constant wireless disconnections and also what the latest firmware is for the WRT610N and whare I can find it, I would really appreciate it.

Firmware in the downloads tab of the below link:
http://support.linksys.com/en-ca/support/routers/WRT610N
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

LaserJet Pro 400 color MFP(m475dw) needs rebooting to scan to network folder

If our LaserJet Pro 400 color MFP(m475dw) sits overnight or for a good majority of the day without scanning to a network folder it will need to be rebooted before it will connect to the folder.
I have tried adding a different folder and the same issue occurs. The printer is connected to the network via wireless connection.
Once the printer has been power cycled the scanner now works fine to the network.
I would like to figure out why this is necessary and find a fix for it.

Good day,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Airport express needs reboot to be seen by iTunes

My airport express needs a reboot to be seen by iTunes. Wireless network is Linksys EA4500 with 2.4 Ghz and 5Ghz networks, Linksys RE2000 range extender set up for 5Ghz and airport express set up for 5Ghz. Latest version of iTunes software and apple express firmware. iTunes running on PC.

Thank you for clarifying that for me.
It may be possible that the placement of the AirPort Express in relationship to the extended Linksys Wi-Fi network may be the factor that it has to be rebooted when attempting to stream from iTunes.
Where do you have the Express in relation to both Linksys devices? Same room, different room, different floor? Also were is the iTunes "server" located, again, in relation to all three device when streaming?
Does the Express still exhibit the same problem for the following two conditions:
When the Express is placed in the same room as the Linksys EA4500 router with the network still extended?
When you temporarily disconnect the RE2000 so the network is no longer extended?

WRT610N WIRELESS SIGNAL FAULT ?

Hi
I have one of the above units which has worked fine since i first set it up over a year ago.
Yesterday I tried to add an Epson sx425 WI-FI printer, I followed the instrucions and it connected ok
however it started to drop the link intermitently and kept failing to print (which was also crap from my machine and total jibberish from any other!) then it lost it all together and all the other wireless devices lost their connection .
The router reported it was ok with good signal strength but nothing connected so I switched it off for half an hour and rebooted but it was still the same so I tried to change the pass word but still nothing will connect. I have tried to reset the router also but this had no effect. the units plugged in via wire are working ok it is just something to do with the wirless signal!
Has anyone got any ideas on how I can sort this as I am loosing the will to live !
Cheers.
Bc.

Well if you have any wired computer with the Router then check the IP address… You can check the IP address in the following manner:
Click on Start -> All Programs -> Accessories -> Command Prompt. A black pop up box should come up, type: "ipconfig /all" …
There check the IP address and Default Gateway under LAN….
So the Router (WRT610N) that you have is a Simultaneous dual-band Wireless-N Router... It means it has 2.4 GHz and 5 GHz frequencies...
# Open up the browser and on the address bar type “Address of the Default Gateway” that will open up the Router setup page…
# Then Click on wireless Tab do the following channel settings:
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
# Click Save Settings...
After doing the following settings check the Epson sx425 WI-FI printer connectivity….

New WRT320N wont keep connection, lags out and needs reboot.

OK so I just installed my brand new WRT320N and its been giving me massive problems.I upgraded from a WRT54G and never had this problem befor. The router seems to lag out. The connection doesnt just die and reboot. It seems that it stalls and lags out. I cant connect to anything. Not the router, not the internet, nothing. Everything just gets stuch in a perma loading state like it wants to load up but it cant.
I have just about tweaked everything inside of the routers settings and nothing seems to make it stop. I have reflashed and updated the bios twice. I have poked around and looked at other posts and tried what was suggested, but none of it has worked. At this point im thinking I have to RMA the silly thing but I am hoping some one might recognize the problem and can help me out.Also, this problem is strictly wired, not wireless. It happens to the master PC where the router has a hard connection.
I am willing to entertain any and all options and suggestions.
Thank you all for you time.
If you need any more info on my rig, its a reply away.
Message Edited by lumpking69 on 07-23-2009 01:47 PM

As you have already Upgraded the firmware of the Router, Have you resetted your router and re-configured all the settings on it again. If not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you login to the Router setup page, Below the setup tab you will find MTU, which will be set to AUTO, so you need to change it to Manual and change the Size from 1500 to 1365 and click on Save Settings.
Reduce the Card Speed on your Router. Click on the Start button >>> go to RUN>> type in "ncpa.cpl"- hit OK >>Here(Network Connections) right click on the ""Local Area Connection"" icon and select properties-Here click on the "Configure" jaspal button- Click on the "Advanced" tab- In the "Property" box highlight Link speed and duplex/Connection type/Network or Media type- And in the "Value" box select 10 Mbps half duplex/ 10 base T/10 base half mode and click on OK.
Now check if you still have the same problem with the router.

WRT160N wireless: Keeps Rebooting My Laptop At Start-Up

This is weird: I just bought this router and the hardwired connections work fine...but my wireless laptop cannot even get to the desktop / windows, as it keeps rebooting. - I take the lappie out of range of the signal, down the block, and while I don't get a signal, at least the computer and windows opens and works. Get close to the house and it reboots.
Any help would be appreciated. I'm guessing anything has to be done in Safe Mode...or down the block!
thanks

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable
to the modem first once all the lights are solid green you could plug
in the power cable to the router & check out it will definately work!!
Open the setup page of router using 192.168.1.1 then put in the
password as admin...all you need to do is do the wireless settings such
as Radio Band Frequency to Standard 20 MHZ frequency,channel to 11.
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet
Requests & it will definately work!!!

Linksys WRT54GS Ver 5 needs reboot every 10-12 hours after wiring it to LG BD590 Blu-Ray

Had this router hard wired to a desktop - everything has been fine forever. Moved it so I could hard wire it to the Blu-Ray player for watching Netflix, etc. Everything works. Except the Router needs to be rebooted every 10-12 hours. Unplugging it for 30 seconds works. The router seems to be working, but the wireless signal to the other computers in the house, although showing strong, will not connect to the internet, Router is getting its internet straight from the Comcast modem. I have the latest firmware installed in the router. Any ideas greatly appreciated before I throw this thing out.

Try to re-flash the firmware on your router.
Connect the computer with the Ethernet cable to the router.
Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Also try to change some advanced wireless settings on the router. Click on Wireless tab and go to Advanced wireless settings. Change the Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.

Home Phone Service via Verizon Wireless needs some SERIOUS rethinking!

Has anyone else signed up for home phone service over Verizon Wireless?
Here in LA, they offered a $19.99/month deal using the wireless service - a box provides the service, and you plug your home phone in. The service is adequate, but somebody forgot to think about how home phones work. I tried to get my billing set up through my bank, and after getting no notice for three weeks, I got a message in my email box that my bill was delinquent, and I owed a late fee. I had tried to set up the billing via My Verizon, but could never get a password to work. I finally got a phone number to call, and they sent me a new password via text message - to a home phone with no text capabilities. After hearing and seeing nothing for another two weeks, I called again, and they told me they'd sent the message. I had to remind them that this was a home phone - no texts. So they offered to send me a letter with a new password, within 7-10 ten days. It arrived two weeks later, and didn't work. Each of these phone calls took about an hour, and I still didn't have a connection.
I put the bills (now up to two delinquent cycles) on my credit card, just to bring thins current, and got one more password. This time I called BEFORE trying it, and with the assistance of a more determined tech, got an ID and password combination to work. I can now see my bill. I still don't know if the autopay will work, and I have no idea if there's any way to get a notice that the bill wasn't paid.
I cancelled my AT&T service because of its cost, but at least its billing worked. Verizon has some serious rethinking to do about how it's billing system works for home users. And they didn't lock me into billing hell for two years.
The topper is, today, I got a notice from Verizon that I've been delinquent in returning a refurbished instrument I never received, billed to a phone number I don't have. And of course there's no phone number to call to straighten it out.

Hello KeyGroupGJ!
Wow, Im sorry for all the issues you have had with the Home Phone Connect service! I'd really like to assist you. You mentioned that there is no number to call to get this straightened out. No worries, there is no need to call us, since I can reach out to you. Please send me a direct message with your name, your mobile number, and a good contact number for you. I'll be happy to assist you!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

Airport Express for iTunes needs rebooting to be detected all the time

It seems that each time I reboot my macBook, my airport express needs to rebooted to be detected. I use it for streaming music only- not for internet access- and have it configured accordingly. It is connected to remote speakers and works perfectly when it has been rebooted but if I leave it on and have shut down the macBook the green light stays on but the newly rebooted computer doesn't detect the unit until I unplug it and reconnect. Anybody have any helpful info? Thanks in advance...

Is this message box indicating the Airport Express is re-connecting to your internet service and if so, is this Airport Express connected to a DSL internet service that uses the PPPoE protocol to connect? If so, run the Airport Admin Utility, select your Express, click on the Configure button, click on the Internet tab, and check the box to "always stay connected". Update settings to the Airport Express.

Setting the time on Linksys WRT610N wireless router

Using a Linksys WRT610N, v1, latest firmware installed.
I have been working on wireless access permissions for specific times but, after testing, it appears the time is off 7 or 8 hours. I checked the time zone and it is correct but I can't find anyplace to tell me what time the router thnks it is.
How do I tell what time the router thinks it is and how do I change the time?

Open the setup page of the router .
On the Basic Setup page at the bottom you will see the Time Zone settings .
Select the Time Zone in which you are .
See if that helps you .

WRT610N wireless needs reboot

Similar Messages

Maybe you are looking for