WRT610N with HD on USB port + WD TV Live on the network

Hi,
from the WD TV Live I can share everything and I can see it from the net. I can see the HD on WRT610N USB port from WD TV live but I cannot get in, I cannot see folders. What is more, no access User name and PSW is required when I try to get in the HD media server, no access data required.
Anty help ? Thanks
Solved!
Go to Solution.

Sorry for the banal question, I sorted out. Reading the manual I found out that Auto login option in the WD setting panel was to be disable: that option is to access to the net devices requiring PSW and Username and not to protect the WD access through the LAN. Disabling the Auto Login, my Media Server asks me PSW and Username to access and, once given, I could browse from the WD to the Router HD (pluggeg to USB slot of the WRT610N).
Bye

Similar Messages

IPhone 6 won't play with Kenwood stereo USB port. Help !!

I have a Kenwood KDC-BT743U Stereo in my car, which has a front panel USB port. I've been able to connect my iPhone 4S and play music from my iTunes catalog as well as stream music from Pandora, Soundcloud, Tune In Radio, Mixcloud et al, without any problems until yesterday.....
Now that I've upgraded my phone to a iPhone 6 and when I connect it to the stereo via the USB port, it doesnt play at all. After about 2 minutes of trying to connect , I recieve a 'USB Error" . As I stated, I've had no problems with my iPhone 4S, which I've used with this same stereo deck for the last two years without any problem what so ever.
I'm looking for some guidance on next steps to take in order to fix the problem? Did Apple change the spec in some sort of way? Do I need to go to Kenwood for a firmware update (their website provides no information about iPhone 6 compatability with any of their stereo's which is very odd to me) ?
Please help, my life in the car during long commutes is just not the same......

Possible Solution:
1. Go to Settings > General
2. Go to Restrictions
3. Enter Passcode (possibly x2)
4. Enable Restrictions
5 Disallow CarPlay
6. Reset Network Settings (Not 100% sure if this step is needed)
7. Have at least 1 song in Apple Music App
8. Have Iphone at Home Screen
9. Connect Apple Original Cable
10. That 1 Song should start playing
11. Open Prefered Streaming App and hit Play
Carplay negatively affects USB connection with Non-Carplay USB Audio Receivers.
I have the Iphone 6 with 8.3 iOS connected to Pioneer avh-41000dvd car stereo and the above solution fixed USB audio issues, including Error code 22-65.
If you are having issues upon reconnect, disconnect and bring Iphone to home screen and reconnect.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please.

My Apple desktop computer, 2.4 GHz Intel duo core, OS 10.6.8, stopped recognizing the WD My Book connected via firewire. It works fine with the USB port so it's not the drive. Help please?

It can be the bridge. It could need firmware update. or the FW ports may be an issue. LaCie seemed to invent the phrase/tip 'resetting firewire ports' due to the issues with their drive cases.
You can try an SMC Reset.
So far I have avoided name-brand and tend to see them mentioned. Often with a new OS (though you are on 10.6.8, but when 10.6 came out there was a common complaint and thread of users: FW or USB worked but not the other interface).

Is it possible to perform a backup with a broken USB port? (Q10)

Hi there! The USB port of my Q10 does not work. (I bought it like this, knowing of the defect.) I thought it's a hardware/contact problem, but it's not: I disassembled the Q10 and tested if the contacts of the USB port are connected correctly to the PCB by measuring. (Yes, I'm an electrical engineer.) The device does not charge and it's impossible to establish a USB connection to a computer. It's also not a software issue: I factory reset the phone two times before using it. I want to buy a new Q10 and transfer all data from the old to the new phone. I thought of doing a full backup with Blackberry Link. For Blackberry Link to work I need either a USB connection or a Wifi connection. The latter only works when the Q10 is connected to a charger. You see the problem? So my questions are:- Is it possible to transfer all of the data from one phone to another without using USB? Wifi, Bluetooth, whatever?- Is it possible to do a full backup of the phone without Blackberry link?- If not, are there any apps that I can use that backup most part of my data? BTW: Blackberry blend works, but there I can't backup local calendar and other data this way, only photos and videos. Thanks for your help!

Hello,
Via Media Card, one option is a 3rd party backup app called Ultimate Backup.
For the native LINK method, my memory tells me that BT integration was not included, so that won't work. I don't know if any 3rd party tools can work that way or not.
Good luck!

Even after doing the recovery of my iphone 4, still i am getting a picture with itunes and usb port in phone. showing only the emergency call

I did a recovery of my iphone4. After extracting, recovery and verifying completing, my iphone restarted. But still i can only see the picture with iTunes and USB port in the iphone 4. Only the emergency call is allowed.
After recovery and re-start of my iphone4 the itunes doesn't detect my phone. What should i do now

DFU Mode and restore again, if it doesn't work, well then...I suggest you try using a custom firmware maker (sn0wbreeze), NOT for the jailbreak, just to try and fix your phone.

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

My apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

my apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?

Restore.

After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.

Disable or turn off your firewall, anti-virus, and all security software and try the download again.
Stedman

I can not pair my I hphone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

i can not pair my I phone 6 with my iPad bot are op to date with soft wear and I have tried to reset the network of both of them with no success

Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

IPod touch won't work with car's USB port after sw update

I've been using my iPod with my 2011 Honda CR-V's USB port to play my music through the car's audio system without issue since I bought the car. This stopped working after the latest iPod software update a few days ago--the msg on the audio screen says it's now "unsupported". Is there anything I can do to fix this without a full restore? Why did it change? Thanks for any help.

Hey there,
Glad to hear we're getting closer. Looks like you're connected to the network, just not able to utilize it's internet connection.
Let's check your iPod's IP addres. Tap Settings > Wi Fi and look for your network. To the right, there's a blue circle with a white arrow in it. Tap that circle. If the IP address starts out with 169.x.x.x, it is a self-assigned IP address. Since it came from the iPod, and not the router, it can't be used.
I would recommend resetting your iPod's network settings:
Settings > General > Reset > Reset Network Settings
When the iPod restarts, reconnect it to your network and try Safari again.
If it still isn't working, try powercycling your router and resetting those settings at the same time.
1. Turn off the router
2. Reset the network settings again, as indicated above
3. Turn the router back on
4. Reconnect the iPod to the network
If it still isn't working, let's check your iPod's software version.
Settings > General > About
If you've upgraded to 2.0, the latest version is 2.0.2. If you haven't upgraded, the latest version is 1.1.5. If you're not at either of those numbers, connect the iPod to your computer and use iTunes to check for software updates for the iPod.
Regarding the router settings, I'm not familiar with your router manufacturer. I'd check their website for instructions on that. I think at this point you wouldn't really need to change any settings, but just check for firmware updates.
CG

ITunes Library set up on NetGear R6100 router with ReadyShare from USB port?

Can the iTunes Library be set up on a NetGear R6100 router with it's NetGear ReadyShare feature. from a USB thumb drive or USB hard drive attached to the one available R6100 router's USB 2.0 port?
I have read the Apple forum post about a similar question for the more advanced NetGear R7000 router, which says it can work there. Unlike some of the other sibling Netgear routers that do not have ReadyShare, my R6100 does, which leads me to believe that it should work, since its the same technology (they both have a router USB port with ReadyShare). It just appears that the documentation is very limited. The other post said to format the USB drive to the Apple format (HFS+), rather than Fat32, get the Mac or Apple to see the iTunes directory located on the router's USB port.
I'd like to know if anyone has had any luck using the ReadyShare.feature on their R6100 for sharing their iTunes library to the same iTunes account on different devices (laptop, PC, AppleTV, iPod, etc). My Apple TV has recently acquired a problem of not being able to detect the iTunes library on my PC, aftert a recent iTunes update, but that's another problem that the forums show a lot of people having. So I figured that since my R6100 router has the ability to share media over the network, I would try to move my iTunes library there, hopefully to make it easier to access by my Apple TV, and make it unnecessary to have my PC running when I watch my purchased iTunes movies, that are stored in that library. Interestingly, my movie and TV show files are stored in my iTunes Music folder under the "Movies" and "TV Shows" subdirectories (folders). The way it is set up now, if I'm watching a HD movie purchased from iTunes with my Apple TV, the movie stops playing as soon as my PC is shut down, which confirms to me that the large movie files are being pulled from there to my Apple TV.

Oh groan, not another conspiracy theory. No, it's a lot more likely Apple and Netgear and the dozens of other manufacturers haven't gotten together with the thousands users who have come up with hundreds of thousands of ways of rigging things up and tested each and every one of them. I am confident if Apple were out to mess things up for you they could have come up with something a lot more devious.
Did you do a web search for this? With a Google search specifying Netgear with this error I found:
ReadySHARE USB Hard drive access issue from a Mac Computer (Time Machine or iTunes not working properly)
- Able to see USB hard drive content but unable to write to USB hard drive connected to router's Readyshare port from Mac computer.
- Error that says "The iTunes application could not be opened. Unknown error 13008"
http://kb.netgear.com/app/answers/detail/a_id/22763/~/readyshare-usb-hard-drive- access-issue-from-a-mac-computer-%28time-machine-or
In fact it is almost certain that it is an issue of that particular model router and the drive formats it can use.

I need an equipment with an entry USB port to send a wav file and exit I & Q

We are working with an equipment consisted in a transmitter and a receiver.At the end we have 2 computers,we are trying to send a wav file through USB port from one computer and converted to I & Q signal (that supports our transmitter).
On the other end we have to convert from I & Q signals to a signal who can interprete the USB port.
Our ask is if exists an equipment which could do these two fuctions.
Thanks a lot.
Attachments:
national.doc ‏34 KB

We have data acquisition (DAQ) devices that have a USB interface. You could send a .wav file to an analog output of a USB-DAQ device and you could acquire an analog signal (with analog inputs on a USB-DAQ device) and write that to a .wav file with another USB-DAQ device.
What is an I&Q signal? You need to give more information on what what characteristics are needed for a signal to be I&Q. I have included a link below to a USB-DAQ device within our on-line catalog for you to take a look at.
NI DAQPad-6020E for USB
http://sine.ni.com/apps/we/nioc.vp?lang=&cid=11922
Regards,
Todd D.
Applications Engineer
National Instruments

IPhone locked with an image of USB port and iTunes icon on the screen... Unable to start or reset phone!!!!!!

After updating my iphone, I'm stuck with an image of a USB port and iTunes icon on my phone which I can not get rid of to reset or restart my phone. I plug my phone into my laptop to connect to itunes and my phone does not appear in itunes!!!! I have tried to reinstall itunes on my laptop, I have tried to reset my iphone, I have tried to stop and restart, and I have tried to stop and start apple mobile devise service on my laptop.... None have resolved the issue!!!! Any suggestions????

If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

Trouble with all 3 USB Ports: HP Pavilion 14-v062us Notebook PC

I was recently playing a game on my computer with a mouse controlled by a USB drive. A little bit into the game, the mouse disconnected for no known reason. I have been playing this game about six months now, and have never had this problem in the past. I relocated the drive to the other two ports, but the device was not recognized in any of the ports. I plugged in another device controlled by a USB drive and got the same results. I have uninstalled the USB Composite Device and USB Root Hubs then restarted my computer to no success. Any help towards identifying and solving the problem is greatly appreciated!

Hi there @D3rr1ck,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having problems with all of the USB ports on your notebook. I am happy to help with this.
Take a look through the following and try the sections that are applicable.
HP PCs - Troubleshooting USB connections (Windows 8)
Normally the USB driver is a part of the chipset drivers for a board, so you can also try updating that, which you can find on this page: HP Pavilion 14-v062us Notebook PC (ENERGY STAR) - Software and Drivers
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

WRT610N with HD on USB port + WD TV Live on the network

Similar Messages

Maybe you are looking for