WRTG160N drops vpn first one machine enxt day another. Also flaky browsing

i have a new 160n w/latest firmware.
My wife vpn's in to work and was working fine for a few weeks.(only change was VPN IP Address done a few days ago but worked with new IP for few days)
now the machine she used will not connect. it was working then suddenly was disconnected. when we try to connect it never gets passed 'verifying name/password'.
I tried reinstalling drivers/resetting tcip ect. but nothing worked.
I gave up and grabbed the laptop via wireless and set that up. worked great for the first half of the day and then did the same darn thing.
We swithced back to our original sonicwall router and guess what, works like a champ again on both PC's.
Router is the problem!!!
one other thing that was not working was visiting facebook.com and 1 PC. it would go to the page but stay loading FOREVER! cleared cache, reset internet setting ect ect . now with original router works like a charm too.

You may try to Upgrade the router's firmware...Download the Firmware from here , though you might have the same firmware already installed on your router you must still Flash the Firmware...
Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...See if that makes any difference...Also change the MTU to 1400 on your router set-up...

Similar Messages

HT2518 how do i or can i drag and drop files from one external drive to another ???HOW

how do i drag and drop files from one external drive to another, i cannt get both drives to open up. only one at a time.. i have alot to learn i know but that is where i am at the time...

You posted here so would assume you are also talking about running Windows.
Are the drives NTFS and use on Windows?
Are they Mac HFS formatted?
You likely will need NTFS for OS X in one case. to mount PC and use under Mac OS Lion
MacDrive to mount and WRITE to HFS drives under Windows

My iPad is the first one and is getting slow also if I'm on a app or something it can go off it. Any tips?

My iPad is the first one and is getting slow also if I'm on a app or something it can go off it. Any tips?
Or can I trade it in to apple and pay extra for a newer one.
I have had it for 3 years

My tip is to sell and get a new one. That is not a joke, just sold my wife's first gen, that she had for only a year. Fully expect Apple to retire it with ios 7. Got her ipad 3 and probably will have to retire that in a year or two. I feel as it is better to sell now, before new ios announced.

I would like to change of type of subscription to improve its level. Should I cancel the first one and then take another one ?

hello
I would like to change my type of subscription (adobe reader) to improve to get a higher level. Should I cancel the first one and then take another one ?
thks
cecile

Hi Cecile,
Please Contact Customer Care; an agent will be able to change your subscription from ExportPDF to Adobe PDF Pack, or an Acrobat subscription.
Best,
Sara

10.1.3 Same workspace migrates fine on one machine, not on another

The same workspace (10.1.2) opens fine (and runs) on one workstation.
On the second workstation, there is an error on the load (after the first "migration dialog"):
Error Loading Business Component
Exception: java.lang.NullPointerException
java.lang.NullPointerException
     at oracle.jbo.dt.ui.main.DtuUtil.doFixUpVersion(DtuUtil.java:1615)
     at oracle.jbo.dt.ui.main.DtuUtil.fixUpVersion(DtuUtil.java:1655)
     at oracle.jbo.dt.jdevx.ui.JdxLoader.doOpenProject(JdxLoader.java:1541)
     at oracle.jbo.dt.jdevx.ui.JdxLoader.openProject(JdxLoader.java:1488)
     at oracle.jbo.dt.jdevx.ui.JdxLoader.update(JdxLoader.java:147)
     at oracle.ide.model.IdeSubject.notifyObservers(IdeSubject.java:94)
     at oracle.ide.model.Node.notifyObservers(Node.java:458)
     at oracle.ide.model.UpdateMessage.fireObjectOpened(UpdateMessage.java:681)
     at oracle.ide.model.Node$1$4.run(Node.java:1527)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:293)
     at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:188)
     at oracle.ide.migration.NodeMigrator.doMigration(NodeMigrator.java:336)
     at oracle.ide.migration.NodeMigrator.migrate(NodeMigrator.java:141)
     at oracle.ide.migration.NodeMigrator.migrate(NodeMigrator.java:294)
     at oracle.ide.cmd.OpenCommand.checkWorkspaceOpen(OpenCommand.java:579)
     at oracle.ide.cmd.OpenCommand.open(OpenCommand.java:162)
     at oracle.ide.cmd.OpenCommand.doit(OpenCommand.java:85)
     at oracle.ide.IdeController.handleEvent(IdeController.java:476)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:525)
     at oracle.ide.controller.IdeAction$1.run(IdeAction.java:772)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:789)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:498)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:234)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:231)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)When the application runs for the first time, another error appears:
500 Internal Server Error
java.lang.NoSuchFieldError: oracle.ord.im.OrdDocDomain.conn
   at oracle.ord.im.OrdDocDomain.create(OrdDocDomain.java:2108)
   at oracle.jdbc.driver.Accessor.getCustomDatum(Accessor.java:1402)
   at oracle.jdbc.driver.OracleResultSetImpl.getCustomDatum(OracleResultSetImpl.java:1347)
   at oracle.jbo.server.OracleSQLBuilderImpl.doLoadFromResultSet(OracleSQLBuilderImpl.java:1201)
   at oracle.jbo.server.AttributeDefImpl.loadFromResultSet(AttributeDefImpl.java:1633)
   at oracle.jbo.server.ViewRowImpl.populate(ViewRowImpl.java:2221)
   at oracle.jbo.server.ViewDefImpl.createInstanceFromResultSet(ViewDefImpl.java:1064)
   at oracle.jbo.server.ViewObjectImpl.createRowFromResultSet(ViewObjectImpl.java:2943)
   at oracle.jbo.server.ViewObjectImpl.createInstanceFromResultSet(ViewObjectImpl.java:2842)
   at oracle.jbo.server.QueryCollection.populateRow(QueryCollection.java:2203)
   at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:2088)
   at oracle.jbo.server.QueryCollection.get(QueryCollection.java:1468)
   at oracle.jbo.server.ViewRowSetImpl.getRow(ViewRowSetImpl.java:3650)
   at oracle.jbo.server.ViewRowSetIteratorImpl.doFetch(ViewRowSetIteratorImpl.java:2818)
   at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2674)
   at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2634)
   at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1474)
   at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:2827)
   at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:5699)
   at model.PDFViewImpl.setPDFViewWhere(PDFViewImpl.java:31)
   at view.MyPDF.doPost(MyPDF.java:73)
   at view.MyPDF.doGet(MyPDF.java:39)
   at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
   at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
   at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
   at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
   at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
   at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
   at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
   at java.lang.Thread.run(Thread.java:595)What might cause this behavior? The one machine runs Windows 2000 (the one where it does not work), and the other runs Windows XP (if that matters).
Thoughts?
We're comparing the converted/migrated workspaces from each machine. the workspace only has one entity/one view/one app module, and a servlet with two user defined exceptions and an error page.

For 1 of the 15 times I tried to open the workspace it opened and compiled ok.
Then, I got the second error anyway. However, the second error was resolved by UNDOING a change that I did to the \jdev1013\ord\jlib folder. I don't understand why the files in that folder are so "dated":
C:\Documents and Settings\egivler>dir C:\jdev1013\ord\jlib /on
Volume in drive C is SYSTEM
Volume Serial Number is 580E-B3EB
Directory of C:\jdev1013\ord\jlib
02/10/2006 10:44a      <DIR>          .
02/10/2006 10:44a      <DIR>          ..
12/29/2003 03:26p              68,320 customizer.jar
12/29/2003 03:26p           1,944,842 jmf.jar
12/29/2003 03:26p              36,180 mediaplayer.jar
12/29/2003 03:26p              58,129 multiplayer.jar
12/29/2003 03:26p              82,373 ordhttp.jar
12/29/2003 03:26p              72,254 ordim.jar
12/29/2003 03:26p              29,008 ordvir.zip
               7 File(s)      2,291,106 bytes
               2 Dir(s) 39,367,651,328 bytes free
C:\Documents and Settings\egivler>dir C:\jdev10121\ord\jlib /on
Volume in drive C is SYSTEM
Volume Serial Number is 580E-B3EB
Directory of C:\jdev10121\ord\jlib
10/26/2005 09:45a      <DIR>          .
10/26/2005 09:45a      <DIR>          ..
07/21/2005 01:56p              68,320 customizer.jar
07/21/2005 01:56p           1,912,751 jmf.jar
07/21/2005 01:56p              36,180 mediaplayer.jar
07/21/2005 01:56p              58,129 multiplayer.jar
07/21/2005 01:56p              84,071 ordhttp.jar
07/21/2005 01:56p             210,843 ordhttp11.jar
07/21/2005 01:56p              87,301 ordim.jar
07/21/2005 01:56p             185,758 ordim11.jar
               8 File(s)      2,643,353 bytes
               2 Dir(s) 39,367,634,944 bytes freeThe reason that I replaced them (with the 10.1.2.1 version) was that an interMedia servlet I wrote for 10.1.2.1 would not work in 10.1.3:
Here was that code:
              // worked in 10.1.2 with 10.1.2 JDBC drivers.
              // Error(78,56): method getORADataFactory() not found in class oracle.ord.im.OrdDoc
              // OrdDoc pdf = (OrdDoc) rset.getORAData(1, OrdDoc.getORADataFactory());
              // copied 10.1.2.1 ord jars into: C:\jdev1013\ord\jlib
              // ok in 10.1.2 and if jars copied in
              ORADataFactory ordDocFactory = null;
              ordDocFactory = (ORADataFactory) OrdDoc.getORADataFactory();
              // now what do I do in 10.1.3 for interMedia??

Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

Hi, I looked at the KB document but the email link on it no longer works.
I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the "Graphics card or driver not supported" error, the other does not.
We have two DellOptiPlex 7010's,
Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
"supportabilitytest.exe has stopped working
A oriblem cause the program to stop working correctly. Please close the program."
Then when that's closed out we get:
"Graphics card or driver not supported!
New features in this version of Jabber Video are not supported by your computer's graphics driver.
Update to the newest graphics driver available and run Jabber Video again."
I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
I appreciate any insights, thanks !

Hi ksouthall,
It sounds like the openGL supported version did not install on the one that is failing. There isn't much we can do regarding that error. Best practice is to always upgrade to the latest manufacturer's available driver. Client requirements are below.
Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
For VGA video calls, Intel Atom @ 1.6GHz or better.
Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
Regards,
Jason

WRV54G drops VPN tunnels several times a day.

Help I have a WRV54G with 6 VPN tunnels all going across DSL. Each 1 of the tunnels will just drop and reconnect for no reason at some point maybe not at the same time but constantly. The other side of the tunnels are also WRV54G's. All 6 tunnels are connected together at each location and only their tunnels to me drop and not to anyone else. Any help would be appreciated. Tech support sent me a so called beta load of 2.39.12 but that did not help at all. I also loaded that same load to one of the routers and that tunnel still drops as well as the others.

I've had this wrv54g for several years now and it's never worked properly.
As a router and wireless access point it's ok but using it to connect to my vpn at the
server (befvp41) it's useless. I bought it to test for a company I work for but because of the problem with maintaining a vpn connection I cannot recommend it.
I can establish the tunnel and it will work for a while but if I leave it alone for a while
the tunnel stops working. Both ends show connected but you cannot pass anything thru the tunnel. I have to reset the client end in order to get it to work again. The one thing I haven't tried is getting a static ip at the client end.
I use befvp41's and befsx41's and they work fine... A bit slow but they stay connected.
I've ended up using it on my network because I hate to waste money but it really is a PITA. whenever I have to use the vpn to check the server I have to log on to the router and disconnect and then reconnect the vpn before I can work.
The internet connection doesn't drop out just the vpn stops working.
The Linksys tech support was no help whatsoever.

Media on one machine, Info on another

Hi all-
Up until recently, this worked. I don't know if it was an iTunes upgrade, or the iPhone firmware (or neither, or both).
I have my Media (Music, TV Shows, and Movies) and applications on my Mac Pro. My "work stuff" (calendars, mail accounts, contacts) on the MacBook Pro. That is how I want to sync. Up until recently, it worked.
Now, when I plug in to my MBP for the Info items, it keeps checking the other boxes for the media sections, and erases everything on the phone!
I uncheck them all, reload with the Mac Pro, then it does it again.
WHY does the laptop keep re-checking all of those options, and HOW can I get it to stop?
Even when I have the laptop set up to not sync automatically, it still has those boxes checked. If I uncheck them, it still erases the phone.
I have also tried a full restore from the Desktop.
Both machines are on the same version of iTunes (9.0.3) and OSX (10.6.2)

Well, that's what you want on the Summary Pane, nothing checked. The only things that should be checked are contacts & calendars on the Info pane. There should be no checks on any of the other tabs, regarding content. You've already reset sync history, so what I would do is try one more time, connect your phone, make sure there are no checks in any boxes on the Summary Pane, no checks on any of the content panes, check to make sure. Hit apply, when done, if a popup apperas telling you all your itunes content will be erased, click OK. Then go to your other computer, re-sync your itunes content & see if you can go back to your MBP & do just contacts & calendars. This should work, as you can sync contacts & calendars to multiple computers, itunes content to only one.

What would cause a program to compile and run on one machine and not anothe

Ok, I have an rmi application that uses the ClassFileServer provided by sun as the codebase argument to the server class I use to bind a remote data object to the rmiregistry. On my machine all parts of the program work as expected. However, when I distribued my java source hierarchy and the text file containing the commands to run and execute it to three different machines, I received the infamous unmarshalling exception when the server tried to bind a remote data object. For the life of me, I can't figure out the root of this problem. I'm only distributing the source, no classes, and the commands entered to build and run the application are exactly the same. I've tried running this on different drives of my system and had no issues. I should also indicate that I tried setting the codebase=file:///classes/ instead of using the ClassFileSever and it still didn't work on these three other machines.
All of the machines are running java 1.4.2_0x.

Hi
Strange error you semms to have.
What about port 2001?
If your codebase is .....localhost:2001 then you are using port 2001 and not 1099.
Is 2001 open?
Does the machines on the other subnet (the ones that fails) try to contact a mchine on another subnet?
Ex.
Failing machine IP: 15.10.2.3
Other machine IP: 16.23.4.6
Then you might have a problem!
I don't know why but here at my work some have 15 as subnet and some has 16 as subnet and we can NOT ping or contect eachother computers.
Must be something in the firewalls that blocks it.
/Fredrik

A landscape file opens in landscape on one machine, portrait on another

My wife made some invoices using Pages 09 on her iMac in landscape mode. Now, when she opens the file, it loads in portrait mode (screwed up, obviously). However, if I grab that file and open on my MBPro running Pages 09, the file opens and prints just fine. I've reinstalled iWork 09 on her machine, deleted caches etc. When she launches Pages, she can select her file via the thumbnail view, which, in fact, shows the file in landscape mode. Any idea how to solve this problem? I even re-saved the file on my machine and sent it back to hers. The new file, landscape on my MBPro, opens in portrait on her iMac. Thoughts? suggestions? I checked preferences, and Page Setup doesn't do anything to the current layout.

You deleted caches, but did you delete the com.apple.iwork.pages.plist found in HD > Users > (your account) > Library > Preferences? This is Pages preference file & would appear to be corrupt.

Ipod working on one machine but not another

I purchased a 30gb iPod video today, the problem is after I installed iTunes and plugged the iPod in I got an error message stating my ipod was possibly corrupted and suggesting that I restore it. When I try to restore it says this isnt possible because it can't download the required rescoure. The odd thing is when I plug it into another, much older computer in my house, it works fine. I've looked over a lot of the topics on this forum and can't find anything that has worked yet. Both machines are running Windows XP and iTunes 7, however the older machine has usp 1.0 ports yet it still worked. Any help would be much appreciated, thanks.

Not sure, maybe if you can share the form, I can have a look at it.

How to upload file from one machine (windows) to another (linux)through cre

How to upload a file from windows platform to linux platform.
on both platforms sun app server is running.
from creator is there any methode to open ftp port and upload

http://www.google.com/search?q=jdbc+blob
Blob processing varies between databases; see also examples for whatever database you are using, e.g.
http://www.google.com/search?q=jdbc+blob+oracle
If you are storing text data instead of binary data, replace "blob" by "clob" in the searches.

Can I split iTunes library (video content on one machine, music on another)

I am running out of space on my MacBook Pro.
Is there a way I can keep all the music in the iTunes library on the MacBook Pro, and then move all my video content (which has almost filled all the drive space on the laptop) to my Mac Pro?
So basically have 2 different locations for iTunes content?
Thank you.

Perhaps it is possible. I am researching the same issue as you stated. See the URL below and see if it helps you.
http://docs.info.apple.com/article.html?path=iTunesMac/7.5/en/2607x.html

Baffled - HD won't boot in one machine, will in another

x61s
XP
working fine, no new installs
1) had a start-up fail with a 'critical battery error' message. no more starting up
2) with AC plugged in, goes to the screen with safe mode, safe mode with networking etc
3) no matter which I choose, it flashed to energy screen, then blue error screen, then back to safe mode screen
when I stick the hard drive into a T61 it starts up no problem
With the HD in the T61, I have tried all kinds of things to no avail.
I installed the Lenovo System Toolbox, but I get all kinds of errors of things encountering a problem, and program won't start
I tried to start up in the x61, after turning various things turned off in msconfig (using the HD in the T61), but no change
was unable to get any of the restore points to work
it seems like this must have something to do either with a HD problem, or a driver problem.
Nothing is showing up in my event viewer, or in my device manager. i get an error about the 'interface is unknown'
ideas?

"Critical battery error" refers to a problem with the CMOS battery. Possibly needing replacement.
Try changing from AHCI to compatibility mode in the BIOS configuration. If already in compatibility mode, try the opposite.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

TS_EngineNewExecution () takes about 10 seconds on one machine, 1 on another

How can I stop the 10 second delay? I've rebooted, and the function isn't failing, it's just too slow.

To bmihura -
I am thinking of the traditional "Debug Output" that is available in MSVC and CVI 7.x, i.e. calls to the SDK function OutputDebugString the debugger collects. I do not think that CVI 6.0 supports this. These messages can slow down a debugged process.
I ran the default CVI OI from TS 2.0.1 in the debugger on my system, which is similar to yours, and the performance was almost identical, under a second.
Questions:
1) Do you see this performance hit when debugging your OI when you run a client sequence that is empty and without using a process model, i.e. Run MainSequence?
2) Do you see this performance hit when debugging your OI when you run a client sequence that is empty but using your pro
cess model?
3) Do you see this performance hit when using the default CVI OI that ships with TestStand?
Scott Richardson (NI)
Scott Richardson
National Instruments

WRTG160N drops vpn first one machine enxt day another. Also flaky browsing

Similar Messages

Maybe you are looking for