WRTG54G v6 Nothing works right

I have 2 issues with the router. The first is that IT will not allow me to enable wirless security. I am at the screen to select it but when I try and select it just goes back to the default of disabled. I also cannot set the wirless mac filter It will not allow me to enable it. I also cannot connect to the internet I am however daisy chained to my other router a BEFSW11S4. I have my homenetwork setup on static ips and I set the router to access my other one for the default gateway but still nothing. I dont have all night to comb the message boards if I cannot get a simple straight foward answer Ill just take it back.

this i what you can try...hardwire a PC to the WRT , access the wrt using http://192.168.1.1 ...password is admin...change the lan ip address from 192.168.1.1 to 192.168.1.2 ....also disable the DHCP and save settings...go to the wireless section and change the cahnnel to 11 and any desired SSID...save settings ....then go to advanced wireless settings , here reduce the beacon interval to 50 and reduce the RTS and fragmentation threshold by 40 each...save settings...
make sure that you are using the latest firmware for this router....now hook up the wrt to the befw using the LAN ports , do not use the internet/WAN port of the WRT ....

Similar Messages

My tabs and links stopped working. It was fine one night, and the next day nothing worked right.

One night Firefox was working perfectly. The next day (I didn't make any changes) my tabs and links didn't work. What could be wrong?

Have you tried plugging the iPod into a different USB port or using a different USB cable to see if that makes a difference?
B-rock

HELP! Nothing works right. cant install an OS

I need some help...
I bought this imac used a couple of months ago. It was running panther and that was fine. I ran the software update because it hadnt been run for a while. There were a lot of updates. the biggest one was the system update. When installing the system update i got an error message that it couldnt install the system update. I tried to install the new version of ilife and it wouldnt let me because i needed to install the system update.
Im very frustrated at this point...
I only have a CDRW drive in the imac and my tiger OS is on DVD. There inlayed a problem.
I got an external firewire DVD drive and attempted to install tiger on my imac via this external dvd drive.
The installation goes pretty smoothly until it gets close to the end. Then it gives me an error message saying "there as an error and cannot finish the installation".
This is where im at right now. An imac with no OS on it. When i turn it on i get a flashing folder with a question mark.
Please Help!
I dont know if ineed to replace the harddrive or if i can just wipe it clean and start over?
Maybe it's bad ram?
Maybe my logic board is bad?
I dont know, i just want to get it running again...
Thanks

Its hard to point you in the right direction here. You do not have a history of this machine, so you don't know if they were there all along , or if you caused them by doign the updates. Did you get any install disks with the imac? If so I would think you could restore the system and start over...you did not mention running the repair permisions before upgrading....to me that is a MUST. So I would wipe the drive and re-install the system software, and then rerun the repair permisions before and after running the updates. Good Luck.

Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing! Help

Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!

QUOTE: "No green light. Computer turn on."
What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light?

I'm getting a box pop up that says Adobe Disteller - error 5 and nothing is working right on my computer - help!

i'm getting a box pop up that says Adobe Disteller - error 5 and nothing is working right on my computer - help!

Hi jeffreyl82842175,
Please check out this discussion and see if it applies to your situation: Keep getting Acrobat Distiller Error 5 everytime my computer turns on and I try to print a PDF...PLEASE HELP!!! (Install…
If that doesn't solve the issue for you, please provide a few more details about when the error occurs (when you open Acrobat, or try to print to PDF, and so on). Also let us know what version of Acrobat you're using, and on what operating system.
Best,
Sara

Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

I just received some horrifying news from Adobe about my production suite. I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!! I sincerely hope this is not your problem. Mine is ALMOST HOPELESS!! Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

I can't find by CD or did I download it? I want to start over because nothing is working right, picture are doubled.

I can't find my CD or did I download it? Nothing is working right, I want to delete the Elements 13 and start over or use my old version. My pictures in organizer aren't adding new pictures, nothing makes any sense. I put in the files, but all the files have the same pictures and I know I put in different files for different pictures. I don't know what I'm doing but I could use the old Photoshop just fine. !@

Hi,
Uninstalling and re-installing elements will not touch your catalog or your photos so at this stage I do not believe that you need to do it. You would need the serial number - do you have that?
When you are looking at the screen with Media, People, Places and Events in the heading, that is the organizer so you have found the organizer. The People, Places and Events tabs will probably be blank until you take action to update them.
From your other comments, I am assuming that you have converted your old Photoshop Elements 5 catalog to the new format. Note that the thumbnails will have to be regenerated so may appear as hour glasses for a while.
Now, with Albums selected on the left and Media selected in the middle, is there any button at the top saying All Media - if so click on it. That should be showing all of your photos that have been imported into the catalog. Do they all appear?
Here is an example of the Album list
Only ones with the album icon (see 2002 08 18 in example) are actually albums, the others are album categories. Only if you click on names with the icon will the display of images change. The album category can be opened or closed by clicking on the small triangle to the left of the name.
Does that help so far? I can cover Folder view later but want to make sure that your system is acting correctly.
Brian

Uninstalled Firefox b/c not working right, now can't install Firefox or Thunderbird, File extracts and nothing happens.

Always had trouble with failed updates in Firefox. It finally stopped working right so I uninstalled it. Now it will not reinstall and neither will Thunderbird. They just extract then disappear. I never see any dialog boxes asking to install. It fails without any explanation or warning. No dialog boxes are hidden under other windows. Chrome works, but I like Firefox better.

I too am having the same problem. Tried installing 32.0.2 and when that didn't work I went back to 29.something and that still didn't work. Now I have no firefox

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Next try the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have added/embedded four videos on my website, but when I scroll down, the videos scroll in front of the top menu instead of behind as it should. I have tried changing layers, etc., and nothing works. Can you help?

I have embedded 4 videos on my website. It is a single page, scrolling site. When I scroll down, the videos scroll in front of the top menu bar, instead of behind it. I have tried changing layers, etc., and nothing works. Please help.
Thanks.
Paul W. Norman

Hi,
Kindly create a new layer, via the Layers panel:
Then, right click on the navigation bar, and choose Move to Layer > Layer 2
Ensure that Layer 2 is on top of the other layers.
Hope it helps,
Sonam

Mini-DVI to HDTV setup not working right

Hi folks,
I have an iMac8,1 (24" intel with mini-dvi video port) that I am trying to hook up to my 50" plasma TV for surfing the web and looking at photos from the sofa. I've hooked it up with an apple mini-dvi to composite/S-video adapter with very poor results. As soon as I plug the adapter into the mini-dvi port, the iMac changes to a 4:3 aspect ratio at a very low resolution. The video is mirrored to the TV, again at a 4:3 aspect ratio and the resolution is awful. Text is all but unreadable.
I try switching resolutions from the display preferences pane, but nothing seems to work right. There are two display detected...the iMac and NTSC/PAL. Changing the resolutions on either of them don't seem to behave properly at all...everything just stays really coarse on the iMac no matter what, and the TV is horribly fuzzy. If I unplug the adapter from the iMac, the screen returns to 1920x1200.
Any thoughts? Should I be using a mini-DVI to HDMI for the video instead of the composite/S-video adapter?
Steve

Hello mmogie,
The problem is not with in the adapter. The quality on the external LCD or Plasma depends the most on the graphic cards. Thats that.
And in your case your problem is the mirroring, you will get really bad quality on the external screen because you are trying to mirror it with the one on our iMac and the Plasma screen supports different resolution then your iMac does so what happens is when you mirror it the graphics cards tries to find the middle ground ...
Now what you need to do is configure the plasma as extension not as mirror (Under Display Preferences>Displays ) select the second tab "Arrangement" and uncheck the mirror Displays.
So what the graphics will do is find you nice proper resolution for your imac and your Plasma separately and you will have good quality picture, and from there you can change the resolution to tweak it a bit more...
Now to take a step further if you want your Plasma to be the primary screen for your OS X and for you to have the dock on there, run apps and browse the web, all you have to do is from the "Arrangement" tab in the Displays Preferences just point the mouse on the wthite line and click and hold to "Drag and drop" it to your second screen "the Plasma" in your case and you will see how the dock and the task bar will show on the Plasma and you take it from there....
Sorry for the long explanation, I hope this helps. Please let me know.
Good Luck,
Goran

Can't open firefox after upgrading to the latest version. All programmes affected, basically nothing works and it's driving me mad!

Having updated firefox, it does not work. After an hour or so to try and open firefox, it says firefox has crashed and gives option to restart or quit.
Same with internet explorer and chrome - no response. After about an hour, excel finally opened but so slow to be able to do anything.
Also noticed a message bottom right corner of screen saying this version of windows is not authentic. I have windows 7 and it is legitimate and have not seen this message before.
I have read lots on the internet but nothing seems to match my problem if nothing working. I am unable to change settings or look at set up of any programmes because I cannot get in to them.....
Any ideas would be so gratefully relieved please!!
Thank you in advance,

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

I subscribe to Acorn TV. I am unable to stream their videos. I have no problem with Hulu, iTunes, Netflix. I have spoken with Acorn and have tried Firefox, Chrome and Safari, but nothing works. I am using a MacBook OS 10.6.8 and Firefox 3.6.12

I am a premium subscriber to AcornTV. I have been unable to stream video on my home MacBook Pro (OS 10.6.8) using Firefox 3.6.12. I can easily stream Hulu, iTunes, Netflix, etc, but NOT AcornTV. I have tried the AcornTV player on Safari, Chrome and Firefox, nothing works. I use Time Warner High Speed internet at home, and they claim the problem is on Acorn's end, which Acorn denies. The biggest frustration is that I CAN stream Acorn videos on my office iMac desktop, using the same OS and same version of Firefox (we have our own server at work, though).

I'm watching it right now on Firexfox, but it's on a Dell, not a Mac. Have you tired watching it on a Chrome or IE browser instead of Firefox? And does it work on those browsers?
You should continue to follow up with Acorn TV - email [email protected] and you will get help, from the CTO, if necessary. Also, they now have a diagnostic page built that can analyze your computer and it will give them more information about your system. So, if you haven't tried in two months, it might be worth trying again.

Nothing works on Win 8.1

Since updating to CC 2014, none of the key 2014 applications are working properly. Syncing is greyed out or not working, or reporting "sync failed" on all the apps that are supposed to sync.
Illustrator Welcome screen remains blank with spinner running.
Dreamweaver and Illustrator will not shut down, I need to close in Task Manager. Even then there are processes still running which will not even close in Task Manager. So a reboot is required.
There are other problems too which I can't recall right now, enough to stop me using the new versions until there is a fix.
I have signed out and signed back in to CC. I have tried reinstalling some apps. Still nothing works.
This is my secondary machine, a Win 8.1 (HP Omni 27). Everything is working fine on my main Win 7 computer.
If I can deal with the 2 problems above I would be happy. Any thoughts?

AI welcome screen fixed by support with updated system file "ssinfo"

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

Couple of things to check:
You are using Outlook 2003, 2007 or 2010
You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook. Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/). This requires Outlook 2007 or 2010. If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings. Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
For syncing Ringtones confirm that:
The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
You have checked each of the ringtones you want to sync
You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
You have checked Sync Tones on the Tones tab of your iTunes sync settings

WRTG54G v6 Nothing works right

Similar Messages

Maybe you are looking for