WRV200 Access Restriction on all ports for a time period?

I have a system that needs to be restricted to only having internet access for a small window each day. I have been looking at the Access Restriciton tools for htis but it looks like I would need to block each possible port with its own policy. This seems very inefficient and complex. Is there a way to make a rule that blocks ALL ports for a time period?
Thanks!

Under Firewall>Access Restriction when you are creating an Access Policy under Blocked Services you can select TCP, UDP, or IP. If you select IP it will block everything instead of a specific port. You will have to create a rule for each IP on your network that you do not wish to have access outside of your selected window.

Similar Messages

  • I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

    I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • How to disable an alert for specific time period in SCOM 2012 R2

    Hello,
    Is there any option to disable an alert for specific time period in SCOM 2012 R2
    Regards,
    angs

    No. But you can use the scheduler module in your rule or monitor, which will dictate when the workflow will actively run on the agent - hence disabling alerting for that time period.
    http://msdn.microsoft.com/en-us/library/ff453828.aspx
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • Block All Ports for a Host

    We are using BM 3.9 (no SP1 yet).
    I'm trying to block a Windows Media Player stream. If I put the URL that WMP uses into a deny rule, the BM log shows the html page is forbidden, yet the media still comes through.
    So I tried blocking all ports on the host. I put in a Deny rule that blocks All TCP&UDP on both the IP address and the host name. Yet, when I type the URL into WMP, I still get the stream. How do I block this with BM?
    Incidentally, after All ports didn't work, I tried specifying ports 0-65535. But I got an error that that was an invalid range. It did let me use 1-65535, though.

    David,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Access Restriction - Internet Connection Policy (between two times)

    I want to say something about the Access Restriction.
    I set the policy for allow internet connection for one of my LAN PC's. For example, I set the policy to ALLOW internet connection EVERY DAY  from 8:00PM to 10:00PM. Starting with 10M internet connection stops. BUT, after a few minutes I do a power circle (turn OFF and turn ON the router) and I have internet connection again. For me, allowing internet connection from 8:00 PM to 10:00 PM means  to have internet connection ONLY BETWEEN THIS HOURS, not before and not after.
    In my opinion, this is the same situation with two DENY policies for internet connection, one from 12:00 AM to 8:00 PM and other from 10:00 PM to 11:55 PM (for the same PC, of course).
    Why POWER CIRCLE broken this policies ?
    ps - sorry for my English.

    @sunwatcher,
    If I set a policy for my little boy PCs ... for allowing internet connection from 4:00PM to 6:00PM (for example) ... after 6:00 PM internet connection stops and he turn OFF and turn ON the router (power circle)  and after that he have internet connection, from then for a long time ...
    I am from Romania, and I set time zone on GMT +2 (Bucharest time zone)
    I insist with this problem because I want for him to use internet only between two times. Outside this time frame I want him to do their homework.

  • Oracle (SQL) support for Temporal / time period based data

    Beyond standard SQL (DATE type etc. and <,>, LEAST, GREATEST, etc.) does Oracle offer anything to help handle time period based data? E.g. overlapping periods, joins when gaps in time periods from 2+ tables, period contiguity checks, etc. I've developed various SQL query techniques, but they're all rather cumbersome using standard SQL.
    Oracle Spatial offers geo-location support - is there anything similar for temporal query support?
    Any good books / docs on the subject?

    Check out Workspace manager for limited out of the box temporal support.
    You may also want to have a read through this series of articles about temporal database systems. They aren't Oracle specific, but may help you with your temporal system design.

  • How to find the cpu usage per query for a time period

    Hi All,
    Is there a way to find the cpu used per query for a given time period?
    DB:10.2.0.5
    OS:AIX
    Thanks

    user13364377 wrote:
    if there are multiple queries starting at the same time, then what to do?Handle:      user13364377
    Status Level:      Newbie (10)
    Registered:      Jul 5, 2010
    Total Posts:      264
    Total Questions:      113 (84 unresolved)
    why so many unanswered questions?
    clarify your question
    same SQL multiple times from different sessions?
    or
    different SQLs from different sessions?

  • Run a for loop for specified time period

    Hello to everyone,
    I am trying to create a data acquisition system for a NI 9162 board. I need to
    acquire a certain quantity of data (for example 10 minutes) each half an hour
    for example and repeat this process a lot of times. I am trying to do this with
    a loop execution but this is not working well. The first data acquired  is
    ok but in the rest there are a lot of problems. The times are not being
    respected and the board is not acquiring anything. Does anyone can help me? I
    am attaching the VI that I am using.
    Thanks,
    Attachments:
    Consulta.vi ‏80 KB

    You can either use an System.Timer event OR a timed loop in the Structures pallete.
    Use the NI Example finder and search for timer to get an example of timed loops.
    Or use a .NET constructor, go to System in the drop down, the select System timer for the timer control, register the event callback.
    Use the rating system, otherwise its useless; and please don't forget to tip your waiters!
    using LV 2010 SP 1, Windows 7
    Attachments:
    Timer.vi ‏11 KB

  • How to get bpel process insantaces for perticular time period  from java

    Hi Guys,
    I want to retrieve bpel instances from java for certain ( perticular) time period ,
    Please any one help me.
    Regards
    janardhan

    Did you have a look at the listInstances(WhereCondition wc) of the com.oracle.bpel.client.Locator class?
    http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28986/com/oracle/bpel/client/Locator.html
    Jan Kettenis

  • Open all ports for gaming

    Hello yes I am trying to play call of duty for PC and my internet is slow... 30Mbps,30Mbps.... I read up online that I need all my ports open to have my NAT type open....Sadly i dont know how do to this. Can anyone explain?

    samgun1993 wrote:
    Hello yes I am trying to play call of duty for PC and my internet is slow... 30Mbps,30Mbps.... I read up online that I need all my ports open to have my NAT type open....Sadly i dont know how do to this. Can anyone explain?
    Put the machine in the DMZ
    Logon to the router as admin
    select firewall settings
    select dmz host
    check the dmz host ip address and enter the ip address of your gaming machine
    say OK
    Be aware that putting the machine in the DMZ exposes it completely.
    So an alternative is to forward the ports
    I belive they are 3074 for the game and 3658 for voice
    logon to the router as admin
    select firewall settings
    select port forwarding
    select new entry
    specify the ip address of the machine
    under protocols select user defined
    give the app a name
    select new server ports
    select tcp for protocol
    select source port any
    select destination port single and 3074
    say ok
    repeat for the other port
    You'd be better running wired than wireless.

  • WRT160N Website Access Restrictions won't work for https sites

    I have successfully configured a website blocking access policy that blocks http:\\www.facebook.com on a WRT160N V1 v1.02.2.  I did this by entering www.facebook.com  as URL #1 and "facebook" as a keyword and it works great.  However, I have found that this policy does not block https:\\www.facebook.com.  You would think the keyword would be able to block this but it doesn't work.  Please help.
    Solved!
    Go to Solution.

    Was there a solution to blocking https://facebook........?
    I've entered the http and the https url, in additon facebook as keywords. When doing a search for facebook it's blocked and doesn't retrieve anything. When typing in the http url it doesn't retrieve anything, but once i add that S to the http it pops up.
    Has anyone found a solution to blocking  https/facebook?

  • Database account locked as it tries to connect different ports for 16 times

    I need a help in answering one of the issue encountered last week.
    I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
    But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
    As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
    Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
    I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
    is it a NETWORK issue or issue with DATABASE SERVER only?
    Thanks
    SSP
    Edited by: 960738 on Sep 22, 2012 9:13 PM

    960738 wrote:
    I need a help in answering one of the issue encountered last week.
    I have created a database link and tried to access the information from a table using the program written in another language. The password provided was incorrect for that user while creating database link. So we expected that,while retrieving the data, Database connection has to be errored out as password provided is incorrrect.
    But unfortunately, user account was locked out. When i checked with DBAs they mentioned that it tries to connect 16 ports with in a min of time.we were shocked as it STOPS another scheduled jobs with that user. and affects production badly.
    As per the program, it has to connect only one time and yesterday we tried to execute the program in DBAs observation and it errored out as expected. Didn't tried for multiple ports.
    Now the question is, WHY the database connection established 16 times last week and caused user account locked. DBAs are unable to answer it. Any EXPERTs opinion on this would greatly appreciated.
    I have verified managing ports in oracle documentation, it was mentioned that if one port is busy it will try to connect to another port in the range of ports mentioned during the installtion. DBAs verified ports related file and it was blank. and they are not agreeing with this reason. Please HELP me in finding the correct REASON for this.
    is it a NETWORK issue or issue with DATABASE SERVER only?
    Thanks
    SSP
    Edited by: 960738 on Sep 22, 2012 9:13 PMDBLINK is 100% oblivious to the fact any port exists.
    DBLINK only contains username, password & TNS Alias.
    can you post actual SQL & results?

  • Restriction to certain amount for One Time Vendor

    Dear Gurus,
                       We have created one time vendor (say 700000) in Vendor master for the purpose of small amount of entries in SAP.But the users are able to post amounts in more than 1 Lakh say in that master.Now how can I limit the master in such a way that user is not able to post more than Rs 5000 in that master.Should I go for any tolerance group or any other method is there.Please suggest in details
    Thanks

    Dear:
               Please check
               Minimum Payment Value Setting at Vendor level?
    Regards

  • Limiting access to internet for specific time period every day

    I was able to limit particular computers via static ip using acl, but not working now.  Any clues? (mac address hasn't changed).  This is the code I'm using:
    access-list 102 deny   ip host 192.168.0.35 any log time-range work-morning
    access-list 102 deny   ip host 192.168.0.35 any log time-range work-afternoon
    access-list 102 deny   ip host 192.168.0.142 any log time-range work-morning
    access-list 102 deny   ip host 192.168.0.142 any log time-range work-afternoon
    Many thanks!

    Hi Leo,
    Here is the output to the command: sh time:
    time-range entry: no-heavy-traffic (active)
       periodic daily 5:00 to 22:00
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
       used in: IP ACL entry
    time-range entry: work-afternoon (inactive)
       periodic daily 13:30 to 17:30
       used in: IP ACL entry
       used in: IP ACL entry
    time-range entry: work-morning (inactive)
       periodic daily 8:00 to 12:30
       used in: IP ACL entry
       used in: IP ACL entry
    Thanks!

  • HT1420 how to deauthorize all computers for second time in one year?

    hi there....
    first sorry for my english.
    i have allready deauthorize 5 computers one time and after authorize again 5 computers , i wan to do the same think but i cant before 1 year .
    now i cant connect my iphone to i tunes.
    what can i do for this problem?
    thanks for your help.
    p.s.
    i have allredy search for solution on itunes support page and i didnt find anything.

    You can't. You can click the Support link under Quick Links and email for assistance.

Maybe you are looking for