Wrv200 and radius server does not work

I am "upgrading" from a dlink di-524 to a wrv200 because I want multiple ssid's. I have my old ssid configured to use the same radius server, port, password, etc. on the wrv200 as on the dlink. When I try to connect it does not authenticate. (Using certificates - wpa2 Enterprise.) The dlink will still authenticate if I plug that back in. The wrv200 seems to be getting to the radius server since it will complain if I change the ip address of the wrv200 to something unexpected. However, the authentication never finishes. It's as if something just does not pass through the router or is dropped. There are no messages on the radius server, not even a rejected or successful message. Does anyone have any ideas on this? I'd hate to have to use 2 routers to add an ssid (I already have 3 in my network.)
Message Edited by Howlie on 12-11-2007 06:48 PM

Sorry to take so long to reply. I'm using freeradius under Fedora 7. Thanks for the url but I already saw that when I was setting up the radius server. I chatted with tech support about the issue and, since I'm using a wrvs4400n with the same radius settings and working, it is probably a firmware issue. I guess I'll have to just wait for the firmware to catch up.
Message Edited by Howlie on 12-15-2007 03:44 AM

Similar Messages

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

Why sudenly my mail stop fonctionning on my ipad,telling me that my server does not work anymore and I have to redefine my account information?

My Gmail stop working yesterday.Cannot sent or receive message telling me my account informations are not correct???

I did put all the informations and still it does not work telling that these informations are not right!!!!
HELP please

Crstal Report Server does not working on installation of Crystal Design

Hi,
I had installed Crystal Report Server 2008 on a machine, I was able to login and open the CMC console as well but on installation of Crystal Desing the CMC and inforview are not opening. its displaying some dll file is missing.
Kindly inform whether Server does not work after installation of Design on the same machine.
Thanks & Regards
PNN Murthy

Questions related to ASP.NET should be posted in the ASP.NET forums (http://forums.asp.net ).

Server does not work in yosemite

Help! My OS X Server does not work after upgrade to Yosemite! Disaster!!!

After the disappointment that I cant manage the servers running the previous versions of OSX server from my upgraded desktop. I upgraded my office server to 10.10 Yosemite with OSX Server 4.0 I am still not able to connect.
I can remote desktop into the server without a problem (both are on the same LAN with the server on .local). But the Server app is not able to connect.
Actions taken so far:
Update software on desktop to 10.10 and Server 4.0
Update software on server to 10.10 and Server 4.0
Verified connection by pinging IP and .local
Verified to connect to the drive and screen sharing via local network
Rebooted router + switch
Rebooted desktop + server
If you manage OSX servers for clients, keep a system on 10.9 around so you can still keep your business running.
Upgrading the server needs to be done on site with display, keyboard and mouse connected.
Apple please fix a.s.a.p.

Iphone4 - Two Gmail Accounts - Outgoing server does not work anymore

I started using my private Gmail account on my Iphone and everything worked fine (having found help in Youtube videos about how to set up Ingoing/Outgoing server).
Now I added my Gmail account from work (ends on .nl instead of .com - Dont know if that matters). I can now access both inboxes but I cannot send emails from BOTH accounts. I then deleted the new account but still cannot send emails from my first account anymore.
I found that under "settings->Mail,Contacts,Calendars->Gmail Account->AccountInfo->OutgoingMailserver SMTP" I now have a primary server which seems to connect to my first account and several "other SMTP server" which contain either details of the first account or the second account (which I actually deleted aleady).
Should I delete those additional servers? How can I do this? Does anyone have experience with this kind of issue?
Thanks a lot in advance.

I did put all the informations and still it does not work telling that these informations are not right!!!!
HELP please

Airplay on ATV and AX from Lion and ML: ML does not work...

Hi all,
I am having a problem with Airplay under Mountain Lion...but not under Lion.
On a MBP 13 (Summer 2009), I can use iTunes Airplay under Lion to stream music to both an Apple TV and to a Airport Express. In fact, I can play iTunes music on the MBP, the Apple TV, and the Airport Express simultaneously (all 3 or any 2 or any 1, individually). [Of course, Airplay display mirroring does not work under Lion, but iTunes Airplay does.]
On a MBP 15 (Early 2011), I can use Airplay under Mountain Lion to mirror the MBP's display on the Apple TV and thus through mirroring I can stream the music from iTunes to the Apple TV. I cannot stream from iTunes to the Airport Express, whether or not I an mirroring to the Apple TV. In other words, even when the mirroring to the Apple TV mirroring is Off and the Apple TV is off, I still cannot use iTunes to stream music to the Airport Express. Now the Airport Express speakers shows up as an option in the iTunes Airplay menu, but when I select it in the menu it does not do anything.
In summary, using Lion I can stream iTunes music to both an Apple TV and to an Airport Express speakers, individually or simulaneously. Using Mountain Lion, I can stream iTunes music to the Apple TV, but only through the use of Airplay display mirroring. I cannot stream music to the Airport Express speakers even though the AX shows up as an item in the iTunes Airplay menu.
Any ideas how to fix this for ML so that it works as in Lion? I checked and have the same Preferences set for both the Lion iTunes and ML iTunes.
Thanks,
Switon

...a little more experimentation...
I booted the MBP 15 (Spring 2011) from an external backup of Lion (made immediately prior to switching to ML). When I turn off the Server Firewall then I can iTunes Airplay to both the Apple TV as well as to the Airport Express. But when I turn on the Server Firewall, even after allowing ports 3689, 42000-42999 both TCP and UDP, the Airplay does not work. I could not determine which ports were needed for iTunes Airplay, all I could figure out is that when the Server Firewall is off then iTunes Airplay works but when the Server Firewall is on then iTunes Airplay does not work. I tried logging all denied packets, but to no avail, I still could not determine which ones were being denied.
Interestingly, when I turn off the Server Firewall and switch on the System Preference Security pane Firewall, I can still iTunes Airplay to both the ATV and AX. It makes me wonder if when I switched to ML from Lion that some ipfw rules were not left over from the Lion Server Firewall that then keeps ML from allowing iTunes Airplay to work. (I wonder if I restore my Lion Server, then switch off the Lion Server Firewall, then download and install ML once again, then download and install OS X Server once again, whether the iTunes Airplay would then work? Maybe when I have some more time I'll try this, in the meantime I'm going to try a little harder to figure out why the Lion Server Firewall stops iTunes Airplay from working. Dang nabbit, even "ipfw show" does not tell me which packets are being denied when the Server Firewall is ON and iTunes Airplay does not work...does anyone have any suggestions on how to figure out why the Server Firewall is stopping iTunes Airplay from working?)
Thanks,
Switon

OSX server - Comment on Wiki (Mountain Lion Server) does not work

OSX server - Comment on Wiki (Mountain Lion Server) does not work - it always give an error "Comment could not be saved, please try again" eitheir upgrade from Lion Server or fresh install.

sorry, I had been allowed anyone to comment, and use wiki owner user also.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

I am trying to open a service request and the site does not work.

I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

I just went through several screens and had no problems. Try clearing your browser's cache and/or history.

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Wrv200 and radius server does not work

Similar Messages

Maybe you are looking for