WRV200 DDNS-Update fails at PPTP Connection

Hello!
I'm using the WRV200 Router (1.0.39) with an ADSL-Modem (Thomson) to connect to an Austrian ISP. So i have to use the PPTP-Connection to "dial in".
When i'm using this setting DDNS-Update via dyndns.org fails. The Status always says "diasabled". (The Account-Settings are checked)
A second WRV200 at another location uses a solid WAN-IP. This Router doesn't have any Problems with DDNS.
How can i solve this Problem?
Can you explain me the difference between normal and ETSI-Firmware?
Best regards
Mosquito

Hello Mr. Mosquito; the best advise that I can give you at this time is to follow this steps then retry to establish your connection,
-- factory default your router
--Down and uplaod the latest firmware into you router
--Manually reconfigure your router-----( DO NOT UPLOAD THE OLD CONFIGURATION)
-- Do a port forwarding with the server's LAN ip address under the port forwading tab in your router
Note:don't forget to create your account in your server before establishing any PPTP connection. If this does not work please contact us at 1866-606-1866 US/Canada.

Similar Messages

  • Ipad update failed, says network connection failed or timed out, but have good coverage, tried several times

    Been trying to update my ipad, and it keeps failing. the screen message I get says network failed ot timed out. Have no problem with internet coverage. Have tried on several occasions now.

    Tap Settings > General > Reset > Reset Network Settings
    Then restart the device.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • Java 8 update fails - no network connection

    Using the Java console "Check For Updates" button  I get this error :
       Unable to check for Java updates
       Please check your internet connection and try again.
    If I run the Java console from command line then this error shows in command line output:
    2014-04-10 23:35:36.690 java[1356:507] ----- Sparkle Log -----
    2014-04-10 23:35:36.692 java[1356:507] ===== bin =====
    2014-04-10 23:35:38.980 java[1356:507] Sparkle Error: An error occurred in retrieving update information. Please try again later.
    2014-04-10 23:35:38.980 java[1356:507] Sparkle Error (continued): The operation couldn’t be completed. (NSURLErrorDomain error -1100.)
    2014-04-10 23:44:00.216 java[1356:507] ----- Sparkle Log -----
    Have tried using an ehternet connection istead of wifi but same problem.
    Anyone got any ideas?

    It is still in beta stages, meaning it is not ready for prime time.   http://www.java.com/ still tells me today that my 7 update 51 is the latest.  Don't install beta software unless you are a developer willing to play guinea pig.

  • Nokia N86 8MP software update failed.Any1 can help...

    I just bought Nokia N86 8MP,my phone cant update to latest firmware version.It say software update failed, for optimum connectivity,your USB cable should be connected directly to the pc,and not via USB hub,USB keyboard orl aptop docking station.My USB cable is fine and ok.I closed my antivirus and turn off the firewall,but it still failed.I also uninstall the Nokia Pc suite and software updater, and download the latest version from nokia.com.my but it still failed.Any1 can help me?I am using Window XP service pack 2.

    Yes!
    http://europe.nokia.com/get-support-and-software/d​ownload-software/device-software-update/feedback
    Help I'm trapped in a sig factory.

  • Latest iTunes update fails, Uninstall / Re-Install solution fails

    Hello All,
    Katrina, b noir ....
    Several days ago after the last iTunes update failed, crippling iTunes connection to the iTunes Store, I came to the support pages for answers.
    I started following the step by step instructions to uninstall and re-install iTunes 10.4.1.10, first hitch...Bonjour refused to go completely leaving stubborn files behind, I had to download LSPFIX.exe to finally clean its folder
    As instructed by the apple support article, orderly deleted all the other files and folders, used msicuu2.exe, restarted the PC, and using rar extracted the individual .MSIs to continue with standalone installations.
    Got two new errors, Apple Application Support will not install due to "A later version of Apple Application Support is already installed on this computer" and,
    Apple Mobile Device Support failed to install when the AMDS stalled and displayed a 1053 error,
    Tried to start the AMDS service many times without luck, I read somewhere that NETframework service pack 1.1 had resolved that 1053 error in the past...I am logged as admin on a Windows XP machine
    Most of what I did successfully was learned from reading the posts and answers to/from other members.
    I would really appreciate your assistance.
    Thanks and best regards.

    For some reason when I try to download iTunes from the Apple site the file is flagged as dangerous.
    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

    When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

    Hi,
    Please download the updates directly from the link below:
    WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    Regards,
    Sheena

  • Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store

    Recently updated to itunes 10.6.1, but during update it says itunes does not have a valid signature and update fails ,now older version is not able to connect to itunes store error 306. I am using windows 7.

    (Apologies for butting in, wha.)
    now older version is not able to connect to itunes store error 306. I am using windows 7.
    If you still get the 306 after updating to 10.6.1.7, perhaps try the following user tip:
    iTunes for Windows 9.0.x: Error 306

  • I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet". Did my WiFi connection also get lost?

    I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet."  Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages?  When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.

    You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.

  • Software updater fails to connect to server. How can I fix?

    Software updater fails tp connect with the server. I have tried a restart and checked network connections and internet access. I have no problems connecting to internet, App Store and iTunes Store. Help!

    If you know what downloads to look for you get them from support.apple.com.  For example the 10.6.8 combo update v1.1 can be found here.
    The probelm is knowing what to look for and that's why softwere update comes in handy even if you don't want to have it do the downloads.  What's probably going on was that the servers looked by software update were either temporarily down, or as mentioned above, overloaded.  Wait a while and try it again.

  • "The software update failed. Make sure that your phone is connected to the computer and try again"

    Hi
    I just had my xperia Z3c in repairs, and now I seem to have the death screen or something. When I connect to a wall charger or my MacBook, it starts turning on and off, displaying the message "The software update failed. Make sure that your phone is connected to the computer and try again", even when it's connected to the wall charger, not the Mac. I've tried pushing the volume up + on/off button for 10 seconds, and Sony Bridge for Mac doesn't recognize the device. I was told to let it charge for an hour before turning it on at the store, which I did, but again, it starts flashing that message as soon as I connect it to anything.
    Pleease help me out
    Best regards
    Maria

    Connect your phone to a wall charger > press and hold power & volume up for 10 seconds > let it charge for 2 to 3 hours 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • WRV200 dropping VPN/PPTP connections

    I replaced an aging router with a WRV200 on recommendation from two sources. Everything is working nicely except inbound PPTP connections on port 1723. TCP1723 is forwarded to the correct IP address internally. Everything is wired with wireless disabled. When a client connects, they get dropped after about 3 or 4 minutes. Clients are also unable to connect if their local Windows Firewall (XP Pro SP2) is enabled. Our previous router didn't have this problem, and if I swap the routers again, the problem goes away. This is with the latest firmware. Please help, my remote users are panicking!

    Disable all other firewalls ..... reset the router & reconfigure it ...
    See if still it shows the same error ...

  • Failed to update table name (location): Failed to open connection.

    Folks,
    ENV : SQL Server 2005, CR 2008 SP3, Windows Server 2003
    All the reports are working fine except for 4 of them. All of them demonstrate the same symptoms.
    Failed to print/preview report with the error 'A Crystal Reports job failed: Failed to update table name (location): Failed to open connection. Failed to open connection. COA.rpt
    All the reports use OLE DB connection. I have verified the the DB Connection Information. It's the same across all the rpt files.
    Please help.
    Regards,
    Balaji K

    Hi,
    Additional Info:
    CR 2008 SP3 is called by an application using .net. The Application passes a couple of parameters to the CR report. I'm able to preview the report. All the reports use the same set of parameters.
    Balaji K

  • The software update failed. And it's not seeing iphone when connected.

    When I logged in it said there was an update for iTunes software. However the update failed. I quit iTunes. I then plugged in my iphone but iTunes is not seeing it.

    Are you able to update iTunes using a .dmg downloaded from the Apple Website?
    http://www.apple.com/itunes/download/

  • ASA 5505 Problem with outbound PPTP-connection on non-native vlan

    Hi, why am I not being able to make a PPTP connection on vlan80 (trunked to AP Cisco 1142N) compared to vlan10? And yes, I've configured the "
    inspect pptp"
    ASA 5505 with sec plus license

    Hi mate,
    I don't know how to solve your problem but I strongly reccommend you to remove your password from the first post and to update it on your ASA device

  • HT2513 My iCalendar wont open after a OS 10.8.2 update failed to install.

    I noticed there was an update for OS10.8.2 so I ran it. The computer needed a restart so I did it but aftwerwards it gave me an error message saying update failed. I restarted and it loaded the OX but the update didnt load and the iMac no longer shows an update needed. Current version is OS10.8.1 and now my iCal wont load and keeps giving me an error message telling me to reinstall with compatiable OSX. OK, now what?

    When I go to iTunes and select my iPhone, then Photos, it gives me the option to sync photos from my Mac to my iPhone but not the other way around.
    You use iTunes to upload photos to your iDevices, but you can only use it to download photos from the device, if you have iPhoto installed on your computer and your iPhone, and have "Documents & Data" enabled in the iCloud Preferences on your Mac.
    See: Ways of sharing: With other apps,Save photos to your computer using iTunes
    If you do not have iPhone installed, use either the PhotoStream or connect the device directly to your Mac to an USB port and and import from the device. This way you can import all photos that are in the camera roll on the device.
    I really need to back up my photos from my 16 gig iPhone to my 750 gig MBP,
    But what do you want to do? Sync photos back, or backup your iPhone?
    To sync photos back, you use "import", either in iPhoto on your Mac or "ImageCapture", but to back up the iPhone, you use iTunes. But backing up the device will not allow you to access the photos on your mac, see: iTunes 10 for Mac: Back up your iPod touch, iPhone, or iPad
    Regards
    Léonie

Maybe you are looking for