WRV200 multi SSID problem

Hi. now i'm using WRV200 Router model.(use Multi SSID)
- first and second SSID and encryption method is WPA-PSK, working well and no problem.
- third SSID is working well first day, but next day, can be search SSID, but not getting a IP and connection failed.
(if appear this enter administrator mode, not changed any other information, just click to save settings, then i use third SSID in oneday)
- third SSID encryption method is WEP
- Channels are used to channel 6
- in this case, how can i fixed it?
is this problem, SSID's problems? or channel's proble?
why occur to multi SSID problem?
pls help me

The goal is to create one WLAN (wifi) with wpa2 and mac filtering that connect direcly to the physical network with server access, and the other WLAN (public) with only wpa2 protection and in isolated VLAN, for the guest.
Suppose to have two SSID wifi and public (the second in the router web ui), both WPA2 Personal w/o MAC Filtering and w/o VLAN.
I use only PC.
With my laptop (windows 7) and two other laptop (win XP, win 7), I can see both SSID in wireless list, can connect to the first SSID.
When I try to connect to the second SSID, the connection fail
In the attachment you can see the actual router configuration.
In the page Status -> Wireless LAN, ONLY one SSID is displayed (but is this web ui bug?).
Thanks in advance

Similar Messages

Multi SSID problem, not work

hi
I bought a Cisco WRVS4400n to use with different vlan and ssid, I use a Cisco Catalyst behind my new WRV, on sigle ssid mode and without Vlans configured, worked perfectly, but, on trunking mode with multi ssid on different vlans ( to use public and private wifi on differents vlans), doesnt work
this is my configuration
Vlan 3, private, with wpa2
Vlan 6, public, with nocat server.
in port 1 of WRV, trunknig mode, vlan3 tagged, vlan6 tagged
in port 8 of Catalyst, trunking mode, vlan3 tagged, vlan6 tagged
I don't need configure DHCP server, I have on both lans.
wifi clients don't cross trough the router to LANS, my dhcp server don´t give IP to client, becouse can't connect. neither when I force a valid IP address.
thanks

Post a link to the page, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"aichau" <[email protected]> wrote in
message
news:geapsu$iav$[email protected]..
>I use the Dreamweaver to create a web page which have two
popup menus. When
>I
> run the page, it only the first popup menu is come up.
the second one
> never
> show up and give me an error undefined is null or not an
object.
> Is anyone can help
>
> Thank you
>

WRVS4400N - Multi SSID problem

Hi,
I recently purchased this router (WRVS4400N), excelent product!
I've update the firmware to the lastest version available (WRVS4400Nv2-fw-2.0.0.8-K9).
Now I'm trying to enable the Multiple BSSID to create a second SSID.
I've tryed all possible combination, b/g/n, security settings, VLAN, SSID Isolation, I've tryed with WPA/WPA2, WEP, w/o security.
All wireless client can connect to the first SSID, w/o any problem, but can't connect to the second SSID.
Is my configuration error? Is a known firmware issues?
Anyone know how to configure a second WLAN?
Best Regards
Fabio Castagnino

The goal is to create one WLAN (wifi) with wpa2 and mac filtering that connect direcly to the physical network with server access, and the other WLAN (public) with only wpa2 protection and in isolated VLAN, for the guest.
Suppose to have two SSID wifi and public (the second in the router web ui), both WPA2 Personal w/o MAC Filtering and w/o VLAN.
I use only PC.
With my laptop (windows 7) and two other laptop (win XP, win 7), I can see both SSID in wireless list, can connect to the first SSID.
When I try to connect to the second SSID, the connection fail
In the attachment you can see the actual router configuration.
In the page Status -> Wireless LAN, ONLY one SSID is displayed (but is this web ui bug?).
Thanks in advance

I can't connect Multi SSID after upgrade IOS 6

hello.
I have some question for solving a problem
I have multi SSID (ex. A : ([WPA2]Auth(PSK)), B : ([WPA2]Auth(802.1X), MAC Filtering))
I updated iPhone to ios6 and now I can connect to A.
But when i tried to connect another SSID(B), i couldn't connect SSID(B)
It occured same issue after deleted Network A
Has anyone else experienced this issue?
help me

I went to the Wi-Fi menu and clicked on the Wi-Fi network and changed the HTTP proxy from off to auto and it now it works.

Multi-SSID Setup

Hello all. I"m trying to better understand multi-SSID and what better way to do that than to get my hands dirty! Unfortunately, I'm stuck and could use some assistance. I'm able to successfully connect to one SSID, the internal or corporate, but cannot get connected to guest SSID. I've attached my topology and Catalyst config, but here is what I've done thus far.
1. Created three new interfaces on the controller. One for management (10.52.x.x), one for guest (10.1.x.x) and the last for internal (10.65.x.x). All interfaces are using port 1 as the physical port and each have unique addresses (DHCP, Gateway etc) and vlan ID's assigned.
2. Next, I created two SSIDs (guest and internal) and assigned them to the matching interfaces I created in the previous step.
3. Configured and permitted all VLANs over the trunk links on the switch.
Please let me know if I've forgotten to add any pertinent information.

I've changed FA 0/8 to an access port in the native vlan. I do obtain an IP address when directly connecting my PC to the switch. I'm leaving my guest SSID as open authentication since this is just a test environment. After making these changes, I still cannot connect to the guest SSID. My internal SSID works flawlessly. I temporarily disabled DHCP requirement on the guest SSID and configured a static address on my laptop and was able connect with no issue. Seems the problem lies with DHCP..

Multi ssid `s get no ip address

multi ssid `s get no ip address ip address two ssid get a third but I had to configure but received no ip address who can help me ?

I did that, that works for 2 ssid but when I want to make more get no ip address ?
dot11 ssid CISCO_2.4GHZ.Guest
   vlan 4
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 0 ***************
dot11 ssid CISCO_2.4GHZ.Private
   vlan 2
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 0 *************
dot11 ssid CISCO_2.4GHZ.Study
   vlan 3
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 0 Opleiding123
dot11 ssid CISCO_2.4GHZ.Testing
   vlan 5
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 0 *************
dot11 ssid CISCO_5GHZTesting
   vlan 7
   authentication open
   authentication key-management wpa version 2
   mbssid guest-mode
   wpa-psk ascii 0 *****************
crypto pki trustpoint TP-self-signed-1968951208
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1968951208
revocation-check none
rsakeypair TP-self-signed-1968951208
crypto pki certificate chain TP-self-signed-1968951208
certificate self-signed 01
3082023D 308201A6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31393638 39353132 3038301E 170D3130 30373137 32333333
33385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 39363839
35313230 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BA02 F9C8FD66 B6753332 39673712 3E8769A3 DA570286 F5325C16 23F214AB
8E177C69 B168B1D7 DFCB9441 AAE7BCEB C6F77C6C 03FD0C48 21C87C59 8F910C5C
9C12A862 C6A42C75 089D841E C661E383 D8F5CDF9 D707600A 248B5C52 04B073C3
DDD8E50B 1C550A57 F9B9A79A 9159DFB7 22815053 3CCEF64F 09B2616C 0DABB290
E64D0203 010001A3 65306330 0F060355 1D130101 FF040530 030101FF 30100603
551D1104 09300782 0552322E 6170301F 0603551D 23041830 16801463 74685C38
2688464C 3F32F91F 624012F6 A5DBA230 1D060355 1D0E0416 04146374 685C3826
88464C3F 32F91F62 4012F6A5 DBA2300D 06092A86 4886F70D 01010405 00038181
0018AC3A 41116193 F00C9669 F94ADCFF 012DF87E D813AC85 827DADE5 5A76681B
D6B0F166 DC262F3B 845DBE81 045EDB83 14A913E2 1913A385 049D6AF3 2675F6E2
2AB6D802 85A3D5C5 0849F7A0 80714F1C D5307A94 28186E82 1830BEAB DEEDD795
ED3E4145 5C420CBA 0E5866BE 58DEF1EE 13E376B7 F1240AC9 DAB9DACD 1210702C C2
quit
username Tim privilege 15 secret 5 $1$W7mt$xqYHnkhSkureCfhslNmKe1
username Cisco privilege 15 secret 5 $1$KKCD$7d1WzhdTz5iVyrjHJmZWE0
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 2 mode ciphers aes-ccm tkip
encryption vlan 3 mode ciphers aes-ccm tkip
encryption vlan 4 mode ciphers aes-ccm tkip
encryption vlan 5 mode ciphers aes-ccm tkip
encryption vlan 7 mode ciphers aes-ccm tkip
ssid CISCO_Guest
ssid CISCO_Private
ssid CISCO_Study
ssid CISCO_Testing
ssid CISCO_5GHZTesting
antenna gain 0
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 basic-6.0 basic-9.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0 m0. m1. m2. m3.
m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15.
channel 2462
station-role root
no dot11 extension aironet
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
bridge-group 2 spanning-disabled
interface Dot11Radio0.3
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
bridge-group 3 spanning-disabled
interface Dot11Radio0.4
encapsulation dot1Q 4
no ip route-cache
bridge-group 4
bridge-group 4 subscriber-loop-control
bridge-group 4 block-unknown-source
no bridge-group 4 source-learning
no bridge-group 4 unicast-flooding
bridge-group 4 spanning-disabled
interface Dot11Radio0.5
encapsulation dot1Q 5
no ip route-cache
bridge-group 5
bridge-group 5 subscriber-loop-control
bridge-group 5 block-unknown-source
no bridge-group 5 source-learning
no bridge-group 5 unicast-flooding
bridge-group 5 spanning-disabled
interface Dot11Radio0.7
encapsulation dot1Q 7
no ip route-cache
bridge-group 7
bridge-group 7 subscriber-loop-control
bridge-group 7 block-unknown-source
no bridge-group 7 source-learning
no bridge-group 7 unicast-flooding
bridge-group 7 spanning-disabled
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface GigabitEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
no bridge-group 2 source-learning
bridge-group 2 spanning-disabled
interface GigabitEthernet0.3
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
no bridge-group 3 source-learning
bridge-group 3 spanning-disabled
interface GigabitEthernet0.4
encapsulation dot1Q 4
no ip route-cache
bridge-group 4
no bridge-group 4 source-learning
bridge-group 4 spanning-disabled
interface GigabitEthernet0.5
encapsulation dot1Q 5
no ip route-cache
bridge-group 5
no bridge-group 5 source-learning
bridge-group 5 spanning-disabled
interface GigabitEthernet0.7
encapsulation dot1Q 7
no ip route-cache
bridge-group 7
no bridge-group 7 source-learning
bridge-group 7 spanning-disabled
interface BVI1
ip address 10.10.10.2 255.255.255.0
no ip route-cache

Multi SSID

Hi!
We are new to configuring multi SSID for WIFI networks. We have one "CISCO WAP4410N" and one "CISCO SG 200-50 50-Port Gigabit Smart Switch". The switch is working on default vlan1. The domain users are getting IP Addresses from Windows DHCP Server. We have created a sub interface for our default LAN Network in our Firewall and assigned it a VLAN id of 100 and same thing on our WAP. There are now two SSIDs, one for domain users and another for visitors.
Wireless for Domain Users is working fine but the Visitors are unable to get the IP addresses from our Firewall DHCP. We know this is due to the missing configuration in the switch.
Can we have the commands or screen shots of the "SG 200-50 50-Port Gigabit Smart Switch" VLAN configuration as per our requirements?
Secondly, what should be the proper settings as per the attached screen shot. Should we tag the default vlan1 or leave it untagged and what should be the priority settings?
Thanks.

This document provides a configuration example for a guest wireless LAN (WLAN) and a secure internal WLAN that use WLAN controllers (WLCs) and lightweight access points (LAPs). In the configuration in this document, the guest WLAN uses web authentication to authenticate users and the secure internal WLAN uses Extensible Authentication Protocol (EAP) authentication.
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html

Sharepoint 2013 and ADFS 3.0 Multi-Tenancy Problems

Hi
I am hoping someone might be able to help with my scenario.
Architectural Overview:
We have a 3-Tier Sharepoint 2013 deployed. In this infrastructure we have the following Servers (1x ADFS server, 1x TMG Proxy for External Access, 2x Web Front-End servers, 1x Application Server, 2x SQL Servers with P2P replication
On sharepoint we have a multi-tenant setup based on HSNC i.e. with AD integration on domain example.com. We also integrate with a 3rd Party myexample.com which we have ADFS connected to
site1.example.com
site2.exmaple.com
For both of the sites we have configured the required application and run as per requirements of ADFS 3.0.
ADFSserver -> server1.example.com
DefaultRealm -> urn:sharepoint:site
site1.example.com -> "https://site1.example.com/_trust/", urn:sharepoint:site1
with default login page specified /_trust/default.aspx
site2.example.com -> "https://site2.example.com/_trust/", urn:sharepoint:site2
with default login page specified /_trust/default.aspx
On ADFS 3.0 we have realm trusts corresponding to this i.e.
Trust 1:
identifier -> "https://site1.example.com/_trust/" , urn:sharepoint:site1
Endpoint -> "https://site1.example.com/_trust/Pages/Default.aspx
Trust 2:
identifier -> "https://site2.example.com/_trust/", urn:sharepoint:site2
Endpoint -> "https://site2.example.com/_trust/Pages/Default.aspx, urn:sharepoint:site2
The Problem:
When accessing the sites from the client browser to test (using Chrome Incognito mode so cookies terminates at close of browser session), I get weird stuff happening on ADFS and Sharepoint. I try site1.example.com and it fails stating that urn:sharepoint:site1
is not a recognised realm. When looking at the URL request sent to ADFS I can see irrespective of urn set on sharepoint to differentiate, it sends the default urn of urn:sharepoint:site which is not part of the Relay Party Trust in ADFS for site1 or site2.
This causes the SAML authentication to fail. When I add the default Realm to one of the Trusts then it works fine but then It is not a true multi-tenant environment as requests for both sites gets redirected to a single ADFS endpoint

Did you set the ProviderRealms on the Trusted Identity Token Issuer?
http://sharepointobservations.wordpress.com/2013/08/13/adding-host-name-site-collections-to-existing-saml-claims-token-issuer/
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

XY graph - multi-plot problem

Hi,
I'm experiencing a problem using a multi-plot xy graph. I have to display 2 plots together, and make them appear and disappear many times during the program running.
But when I close LV and restart it, the second plot (plot1) doesn't appear, and also I lose all the properties I've set for it (name, color,...). If I don't shut down LV everything works well.
What can I do?

Stefano Moret wrote:
When you write about use property nodes, I'm using the "visible" one.
Your suggestion is to try also to set all the properties from there? Maybe it's a good idea, I'll try.
Here are some code snippets I used once to initialize the graph and later on change legend entries depending on user selection.
You can also change the way plots are represented during run time. You always have to start with ActPlot do selct one of the plots.
Good luck

Multi-pass problems

I bought Multi-pass for a couple TV shows (Daily Show & Colbert Report) because I knew I was going to be without satellite for several days. For the first couple days the shows automatically-downloaded ok, but for the last couple of days they haven't downloaded automatically, even though I can see the episodes listed in the ITunes Store. I've tried leaving and entering Itunes and the Itunes store several times, nothing happens... any suggestions?

First, make sure that you're logged into the iTunes Store using the account ID and password under which you purchased the season pass. Then try the "Check for Purchases" command under the iTunes Store menu; you may find the episodes waiting for you there.
If you're sure that it's correct and the missing episodes still aren't appearing, contact the iTunes Store customer support department through the form linked from the bottom of their Season Pass FAQ web page (I recommend that you use the form, not the link in your Purchase History as they advise; that's not proven to be very reliable) and explain the problem to them.
Good luck.
Message was edited by: Dave Sawyer

Multi-Instrument + Multi-Thread problem found

Right.....I have done a lot of research on why logic was not multi-threading correctly and have narrowed it down to one problem...using Kontakt as a multi instrument.
My Mac is a 2 x 2.26 GHz Quad-Core Intel Xeon. This means that it is capable of distributing work loads over the multiple cores of the CPU to prevent core audio overloads from happening.
If I run any plug ins in stereo or mono mode, the CPU acts as it should; I will load up a program, add processing and when the load is becoming a strain for the CPU, I use a bus send and work on that, then the workload is redistributed across more of the cores by logic, allowing me to continue working.
However, I need to use Kontakt as a multi instrument. I usually have 3 instances of Kontakt open and on each one of these, I usually have a minimum of 10 outputs being sent to the aux channels of logic. Therefore using Kontakt as a stereo instrument is not an option, as I would have to open around 30 instances!
Here is the problem; say for example, in Kontakt I send a kick drum out of Kontakt into AUX 3 + 4. The AUX channel in logic will being to show output. I can now EQ this single kick drum seperate from any other sound in logic.
If I began to add processor heavy plug ins to this AUX output, rather than share the workload across the cores as it should and does with stereo instruments, logic now only uses a single core and it will core audio overload very quickly.
As I said, this only happens when I set up Kontakt as a multi instrument. The main problem is when I begin to have many different outputs from my 3 instances of Kontakt, as by this stage, many different sounds will have processing. All 3 multi instruments and their processing are then controlled by the single processor and the other 7 are almost inactive! It therefore becomes impossible to use Kontakt and I have to switch to stereo instances. This happens for all multi-instruments not just Kontakt.
I have just purchased Kontakt 4, I am upgrading to OSX 10.6 (Snow Leopard) and am updating Logic to v9.1. (From v9.0) Will this help at all? Is there an answer to this problem or will I just have to open 30 stereo and mono instances of Kontakt to continue working!
I have included a link to a ZIP file with two photos of the problem. In the photo named MASSIVE. I have one instance of massive running as a stereo instrument. It is sent to a BUS where I applied the WAVES L316 Limiter. I did this multiple times and if you can see on the system performance (Top right) Logic is sharing the workload over the processors as it should.
In the second picture named KONTAKT MULTI - I have done the same thing, but I have opened Kontakt as a multi instrument, sent a kick drum to AUX 2 and then forwarded this to a send where I applied the same WAVES L316. You can see on the system performance meter (Top Right) that Logic now does not re-distribute the workload, it is using one core and anymore plug ins applied to the AUX or bus channels relating to Kontakt will now make it core audio over load, even though now I am using far less processing.
PHOTOS: http://www.sendspace.com/file/og8a94

Ditto
Using Pro 8 Studio, I had this problem after installing Snow Leopard.
Invested £159 in Pro 9 update, same problem.
This has stopped most of my work since my external WK4 sounds are superior to the included software sounds.
As suggested, will now report since since it obviously seems to be a general problem.

WRV200 port mapping problems.

I did the port mapping to enable direct IP dialing from Linksys PAP2 VoIP adapter. It worked fine, untill I replaced the old router with a new WRV200.
The funny thing is the mapping works for some time, then it stops to work. To bring it back to work I have to restart the WRV200 router.
Everything worked fine with old Digitus DN-11005 router. I did not changed the settings in the PAP2 adapter. And, I used the same port mapping settings with WRV200 router. The PAP2 is set to DHCP and static IP is set through static DHCP client list in WRV200.
The only change from the old Digitus LAN settings is a different subnet IP. The old one was 192.168.123.0 the new one is 192.168.122.0
The direct IP dialing is done through WAN of the local Internet service provider. Both locations had the same Digitus router and PAP2 adapters installed with the same port mapping and PAP2 adapter settings. Now with one router changed to WRV200 the system does not work correctly. It looks like the port mapping in WRV200 stops working in about an hour after last usage of this feature.
Static CP Client Lis

I've been busy playing with the issue. Looks, like it is not the port mapping issue, after all.
The LAN is constructed from the WRV200 router and a Surecom EP-805SX 5 port switch connected to one of the router ports. The PAP2 adapter is connected through the switch.
When the PAP 2 appears to be locked it does not make outside calls, and it does not receive them. SIP registering does not work, as well. So, the communication with Internet does not work. In the same time, I can access the web config page of the PAP adapter. To bring everything back to normal I need to pull out and back in one of the WRV200 LAN port plugs. So, reseting of the whole router is not necesary, because disconnecting one of the LAN ports does the trick. What is bugging me is, it works with any of the 4 LAN ports. It does not have to be the LAN port the PAP2 is connected with.
I've noticed, also, a computer connected to the same switch the PAP is connected with has some problem to communicate with the DHCP server of the WRV200 router, from time to time.

Object view multi-cast problem

We are using the following object to generate XML the output for multi=cast is prodicing an unwanted extra tag "*_ITEM"
Any ideias??
CREATE OR REPLACE VIEW sjs.arrest_obj_view
AS SELECT CAST(MULTISET(SELECT 'ERROR NEEDED ' FROM dual) AS errors_type) AS "Errors",
a.a_date AS "ArrestDate",
NVL(a.a_photo_num,'NULL') AS "PhotographNumber",
NVL(a.a_division,'NULL') AS "AgencyDivision",
'MODEL MAPPING PROBLEM' AS "ArrestType",
NVL(agcy.agcy_ori,'NULL') AS "ArrestingAgency",
a.a_id AS "ArrestNumber",
NVL(oa.o_number,'NULL') AS "ArrestingOfficerID",
NVL(o.o_number,'NULL') AS "AssistingOfficerID",
'MODEL MAPPING PROBLEM' AS "AssistingAgency",
'MODEL MAPPING PROBLEM' AS "CJTN",
CAST(MULTISET(SELECT l.lu_name AS "Weapon"
FROM sjs.arrestweapons awm,
sjs.lookuptable l
WHERE awm.a_id = a.a_id
AND awm.weapons_id = lu_id (+)) AS arrest_weapons_type) AS "ArrestWeapons"
FROM sjs.arrest a,
sjs.agency agcy,
sjs.officers o,
sjs.officers oa
WHERE a.agcy_id = agcy.agcy_id (+)
AND a.o_arrest_id = oa.o_id (+)
AND a.o_assist_id = o.o_id (+)
- <ROWSET>
- <ROW num="1">
<InterfaceTransaction>ADD</InterfaceTransaction>
<Resubmission>RESUBMISSION NEEDED</Resubmission>
<SubmittingAgency>NY1111111</SubmittingAgency>
<SubmittingEmployeeID>FFOTI</SubmittingEmployeeID>
<TOT>TOT NEEDED</TOT>
- <Errors>
- <Errors_ITEM>
<Error>ERROR NEEDED</Error>
</Errors_ITEM>
</Errors>
<ArrestDate>3/18/2002 9:40:0</ArrestDate>
<PhotographNumber>PPPPP</PhotographNumber>
<AgencyDivision>PPP</AgencyDivision>
<ArrestType>MODEL MAPPING PROBLEM</ArrestType>
<ArrestingAgency>NY1111111</ArrestingAgency>
<ArrestNumber>1</ArrestNumber>
<ArrestingOfficerID>NULL</ArrestingOfficerID>
<AssistingOfficerID>NULL</AssistingOfficerID>
<AssistingAgency>MODEL MAPPING PROBLEM</AssistingAgency>
<CJTN>MODEL MAPPING PROBLEM</CJTN>
- <ArrestWeapons>
- <ArrestWeapons_ITEM>
<Weapon>FULLY AUTOMATIC RIFLE OR MACHINE GUN</Weapon>
</ArrestWeapons_ITEM>
- <ArrestWeapons_ITEM>
<Weapon>FIRE/INCENDIARY DEVICE</Weapon>
</ArrestWeapons_ITEM>
</ArrestWeapons>
</ROW>
</ROWSET>

How would you replace the multi-cast within the object with cursor?
Thanks

Multi-Camera Problems in Premiere CC v7.1.0 (141)

I have the CC edition of Premiere and it automatically updated a couple days ago to v.7.1.0 (141), but ever since the update, I've tried to create multi-camera sequences, nest it in a target sequence and instead of just showing 1 layer of vidoe and 1 layer of audio in the target sequence, it shows all videos and all audio from the multi-camera sequence. Because of it, I can no longer enable multi-camera editing. Can someone help or anyone else having similar problems? I'm using a MBP OSX (v10.9), 2.7 GHz Intel Core i7, 16 GB RAM.

Is the "linked selection" icon selected or not? You can find that on the top right of your timeline. Toggling it allows you to drop a nested sequence (eg. multicam) on a timeline as either one single nested clip or as the expanded view with all the clips showing which it sounds like you are referring to. It's the middle icon here:
Good luck!

[WRV200] Two SSID and remote control?

Hi,
I have a WRV200 and need to setup a wifi access for a place that is shared. So two questions:
1. How can I have two SSIDs, one for me, one for visitors with my router? Is it by setting up a VLAN ?
If yes, would those persons be able to access the Internet using a separate WPA2 key?
2. I will need to remotely configure that shared wifi by replacing the WAP key now and then, not the
main key for my private access, only the one for visitors. Is it possible to remotely connect to my
router (dynamic IP address, not static) and configure it remotely so each time a new visitor shows
up, I can change her/his WPA2 key ?
If yes, what do I need? Some kind of OpenDNS service?
The idea is for a house that is rented during vacation time. Each time a new visitor would show up,
I'd have to set a new key so the renter can access the Internet for the rental time, and then change
the key remotely to disable access until the next visitor.
Thanks for any clarification.
Steve

Hi Steve,
Yep I have to admit I have for some time personally used DynamicDNS because I am too thrifty to buy a fixed IP.
I guess for the silly reason Dyndns was the first in the list of choices in the management gui. .
Next time you buy a Small Business Wireless Router, move away from the End of Life WRV200 product have a look at the new RV120W or RV220W wireless routers,
But the older WRV200 allow for remote management, if you know it's IP address or domain name (via DYNDNS or TZO).
Have fun.
regards Dave

WRV200 multi SSID problem

Similar Messages

Maybe you are looking for