WRV200 - Wireless Connection Is Periodically Lost

Hello,
I just bought a WRV200 and I have updated the firmware to 1.0.32.2.
I'm using WPA2-Personal.
I have to Toshiba notebooks with the Intel(R) PRO/Wireless 3945ABG.
I'm using in both computers Windows Vista (Home Premium and Ultimate editions).
The problem that I have is I get the connection lost periodically. Not always at the same amount of time.
I have tried 2 different Linksys WRV200 routers and I always have the same problem. I must add that one router have the 1.0.32.2 and the other 1.0.12 firmware.
Any ideas why? Is the ok? Is about the key renewal?
Thanks in advance for your replays!

A couple of suggestions:
1. Firmware 1.0.32.2 is not the latest firmware - you could find newer beta firmware at linksysinfo.org at the download section.
2. It would help if you spend the time to update the wireless driver on the computers. Check with the Intel's web site for the latest version.
http://support.intel.com/support/wireless/wlan/pro3945abg/index.htm
Message Edited by VPN_user on 08-21-2007 08:37 PM

Similar Messages

Password for Wireless Connection is getting lost in ATV

HI, since I updated my ATV to 3.01 my password for the Wireless connection is getting lost at least once a day! I always have to type in the password new.
I had this problem already some months ago, but then it worked fine. Now after the latest update the problem pops up again!
Any idea what this could be?
Thanks,
Michael

Welcome to the  Discussion Forums.
Whilst I understand that losing the password is an issue and a time consuming chore to retype back in, surely your first issue is why you keep losing connection to need to reconnect in the first place.
What type of security are you using on your network, have you tried changing channels to avoid interference.

WRV200 - Wireless connection established - lose communication after time

I recently purchased a WRV200 wireless router and I have to say the features it offers is well worth the price. I have found an anomaly with the router that remained even after several configuration changes and the most recent firmware update. This situation is as follows (note: all hard wired connections are unaffected by this issue). SSID broadcast: off Security: WPA2 Personal (PSK set) Default settings on the rest of the wireless configurations. 1. Wireless users with the correct PSK and SSID name can connect and receive wireless service. 2. After what seems like an arbitrary amount of time, a wireless user cannot reach the gateway or any other node beyond it - the user is virtually disconnected. However, the user is still receiving a full signal from the router and remains connected wirelessly. 3. "ipconfig /release" followed by "ipconfig /renew" does not resolve the issue. 4. In order to restore service, the user must disconnect from the wireless service host (the router) manually, and then reconnect. At this point service is restored until the next arbitrary outage.

try changing the wireless channel to either 1 or 11 .. beacon interval - 50 , Fragmentation threshold - 2306 , RTS threshold - 2307

I keep losing my wireless connection after periods of inactivity - any solution? I recently installed a new wireless router with improved range.

I recently installed a Netgear Wireless router for improved reception, but now my macbook loses connection through Airport after periods of inactivity. We have another older Macbook in the house, and it never loses connection. I never had this problem with the previous Linksys router, just limited range. Any ideas what is causing this? It's frustrating to have to frequently shout down and re-boot. That so far is the only way I can re-connect.

Adjust the Wireless Settings on your linksys router...
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your
network key whenever you connect to your wireless network.
Do NOT give this key to anyone.
Click on Advanced Wireless settings>>
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ...
Try to look for the Wireless Network on your laptop and attempt to connect...

I run Windows Vista 64 bit and just installed Firefox 4. I keep losing my Wireless connection and Firefox lost my Bookmarks, how can I fix it??

I also run Zone Alarm security

I had the exact same error message but it was on an Airport Extreme Base Station. I use a Macbook at my office and there are 2 XP desktops as well and we were using a shared storage hooked into the AEBS in order to share files. One day all of a sudden the XP machines starting displaying the same error message that NetBIOS should be enabled.
After googling every available article I discovered what ultimately solved our issue.
I opened the the Airport Utility app on my Macbook I clicked on "Manual Setup"
Then "Disks"
Then "File Sharing"
I discovered that the default name under "Workgroup" was Workgroup, but our network in the office is called "MSHome" so I changed it to match the PCs and instantly both PCs connected to the shared storage.
Also I changed the 2.4Ghz channel to a number other than the default 11.
I changed the name of the base station to a name less than 8 characters with no spaces and no symbols.
I changed the Wireless Security to "WPA/WPA 2 Personal".
I've been trying to add my fix to other Apple Support pages and they're all archived and closed to replies, so if you haven't gotten your TC to work, maybe this might help.

Wireless connection lost between my router and printer (hp officejet 4620)

My hp officejet 4620 printer has been working fine but now the wireless connection has been lost and I can't get the wireless connection back. The blue light for the wifi flashes blue. I can't get the connection back between the router and the printer because my wifi is actually working fine with my laptop. Any suggestions about what i can do to get the connection back so I can print again?
Is it something I need to do on the printer screen or laptop to fix the problem?

Have you powered off everything and power up again? Power off printer and router. Power on router and wait 2 mins. Power up printer and see if it connects to your SSID.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Just started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

I just updated itunes and started to update my phone to iSo5 when wireless connection was lost on my laptop, I can't get it back and it says there are no networks available-router is working fine, am using it on my iPhone now. Help!

Reboot your router. You by chance dont have a netgear N300 WNR2000 router do you? I had one of those and would lose wifi on it constantly, Switched to a Cisco wifi router and it works much better.

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

I lost my wireless connection everytime

Hi,
I have a little issue. When I start up my iMac intel I always lost my wireless connection. Same thing when my iMac goes into suspend mode. I then have to click on the wireless icon then on the network I want to join.
How comes? Why the iMac is not able to reconnect automatically to the correct network?
Thanks

Doesn't seem right,and I'm not 100% certain, but I think you need to try dragging this file to the Desktop, then log out and back in, then setup the connection again... keeping an eye out for something like "Save in Keychain", or "Save Password"
/Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
The reason for moving it to the desktop is that you can always drag it back if this doesn't work. Logging out/In will cause a new fresh one to be made.

Satellite L500 - Lost wireless connection

My Satellite L500 recently lost wireless connection. I looked up the Realtek wireless device in Device Manager, and it says the device is working properly. I have tried using "ping 192.168.1.1" to reach the router, and I get "Transmit error - general failure".
Any ideas?

Hi buddy,
And now does Windows recognize some WLAN networks in range? Your posting lost wireless connection is not very useful
You should try a WLAN driver update that you can download on official Toshiba page:
http://aps2.toshiba-tro.de/wlan/
If you still cannot find or connect to WLAN networks disable the WLAN power saving mode in Windows power profiles. You have to set it to maximum performance.

Lost wireless connection with mx860

i lost my wireless connection with my mx860 - please help, i have tried it all
thank you

Did you solve your printer connection problem? I have the same issue. When I first turn the system on, it is connected. But after a short time (a few minutes?) it loses connection between Mac and printer, even tho both are connected to my WIFI. I have to turn the printer and and off to reconnect it to the Mac. Very frustrating. I have checked Netgear, Printer and Mac settings and can't find any explanation.

E60 lost wireless connection to network

my E60 lost wireless connection to network. tried GPS, DUAL, automatic, manual search for network. Same SIM works fine with different phone. Any idea anyone?

Hi Neil
I'm not familiar with HH (I use a third party router) but it looks as though the HH is set to NOT broadcast the SSID. I'm sure that if you go into the HH settings (the address foe the HH should be 192.168.1.254) you should find somewhere a check box or whatever that allows the router to b'cast the SSID or not. Some would argue that you should not b'cast the SSID but IMHO it makes no difference as the SSID is so easy to discover even if it's not being b'cast.
Just another thought is that you might have to set the wireless connection up as a separate connection to the wired connection. I don't know which OS you are using but if Win 7 then go into 'Network and Sharing centre' and then select 'connect to a network' and take it from there. If not on Win 7 then, if I recall correctly, right click on the networking icon in the system tray and there should be an option to connect to a network.
Hope this helps, if not then I'm sure there are other HH users on this forum who will provide advice.
wedding
Mistakes and embarrasing goofs in e-mails are only discovered when you've sent them!

What's wrong with my ipad3 every 5 minutes I lost my wireless connections?

I don't know what's happen? Every 5 minutes lost wireless connection. I bought today and I can't use :(

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
Also turn your router off for 30 seconds and on again.

PB G4 17-inch lost wireless connection!?!

Dear all,
Execute me if my question have existed!
I searched all this box but seem I didn't find a best solution for my problem.
My problem is :
The PB G4 17-inch always lost wireless connection when I don't use for minutes and it goes to sleep mode!
I want to share files with my friend throws wireless connection but I don't need use laptop all times.
Have anyone meet this problem befored? Did you solve it?
Please help me with your suggest!
Thanks for your words!
(my PB use MacOS X 10.4.6! with all updated soft.)

Im having the same problem. My Netgear used to connect wirlessly to the network and the inernet, now all it connects to is the network. And comes back with an error saying not connected to the internet.
The only way I can use the internet now is through the Ethernet connection out of the Netgear.

WRV200 - Wireless Connection Is Periodically Lost

Similar Messages

Maybe you are looking for