WRV210 Administration pages not visible in Internet Explorer

I recently updated my firmware in my WRV210 router to Version 2.0.1.5 which is the most recent on Cisco's download page. After upgrading the firmware, I found that some of the administration pages do not appear to load correctly in internet explorer version 9.0.5. For example, the ADMINISTRATION -> MANAGEMENT page has data but to see the data, I have to scroll down about 3 pages. All five entries under STATUS do not have any data visible at all which is typical for most of the other administration pages. An image of the Status Router page is inserted below. I have logged in to the administration pages with an old version of Firefox 3.0.14 and the pages are visible. The operating system that I am running is Windows 7 64bit.
I haven't run across any other entries like on this or other sites. Are there any known solutions to this?

I have a WRV210 at a client site, and after upgrading to firmware 2.0.1.5 I've noticed the same behaviour. Upon inspection of the HTML I notive the right-pane-content area contains a
element right before the form begins. This tag was intended to hold a background image/style for the content area, probably white or at least some colour other than the already blue page background. It has a defined width and height of 1000px * 2622px; If I remove the and re-render the page, the form displays at the top. So it seems this was supposed to encompass the form, but instead because it self-terminates, precedes it with a vacant space 2622px high; It seems then that this is indeed a bug, in many pages.
I've also noticed that the web server on this router is annoyingly slow, though I can't remember if it's any slower than the previous firmware revision. I, like many, purchase Cisco products for the promise of higher quality, greater stability, and better support/documentation/community than other competing manufacturers. Sometimes you win....

Similar Messages

Page not displaying in Internet Explorer

Hello all, having trouble getting one page on my site to load via internet explorer. Sometimes it displays only the background image, and sometimes it will not display at all.
Hoping someone can take a look at it and maybe see what's off? Here is the 1 page - www.birchmountainearthworks.com/landscapes/landscapes.html
Thanks if anyone can help!

That's a nice page. Too bad it's built with such antique methods.
Anyhow, I'd make the following changes:
1. Move "</head>" so that it's below the embedded styles and just above "<body>" where it should be.
2. Move the Google Analytics code so that it's below "</body>".
That should get you going in IE.
And by the way, you would definitely want to add an appropriate doctype to the page.
Message was edited by: Murray *ACP*

Tab Not Visible in Internet Explorer 10

Hi,
We have developed application using oracle apex 4 and oracle 11g xe as database. Application runs perfect in Internet Explorer 8 and 9, Recently we upgraded browser to IE10 problem we are facing is there are more than 10 tabs in the application all the tabs are not visible in the application. Please suggest me how to fix this issue.
Thanks
Sudhir

Sudhir,
The fix you want is for the 10 tabs to work again in IE. Oh, boy! I hope someone can help with that.
But stepping back for a moment, 10 is a lot of tabs. Is 10 tabs all there will ever be? What if you need an 11th tab? I'm pointing out that it might be time to consider changing the way navigation is done. Now no one likes to comtemplate all the work and user disrutpion of changing the navigation method. But there's only so much room for displaying tabs.
But please see {thread:id=2519792} for some ideas.
Good luck,
Howard

IWeb '08 Photos Not Visible in Internet Explorer 7 on PC's

I've read through the posts looking for a workaround....I can't get photos onpages from the "iWeb Photo Template" to show up on PC's running IE7.
Every other page looks just fine in IE7...and in fact, looks fine in Safari and Firefox (as you'd have guessed). It's as if the Javascript isn't loading for those pics. Just empty...not even a "placeholder"
Any thoughts towards a workaround?

Explorer 8. The weird thing is, when I check the page on a pc, the images are infact loading, but im getting a clear box with a red x over them!

OS X Server Wiki pages do not display in Internet Explorer 9

I recently did a clean instalof OS X Server 10.8.2 on my Mac Mini using the recently released version 2.2 (build 166) of the Server App. Today - after enabling the Wiki - I noticed that the body of the Wiki pages no longer display on Internet Explorer 9 - only the Please Login banner displays. The Wiki Page body shows only as a squashed down blank rectangular box near the top of the screen. This happens on all of the PC's that I have tried - both internal and external.
There were a number of Wiki Enhancements listed in the release notes for Version 2.2 of the Server App. These enhancement appear to have made it impossible to acess the Wiki using Internet Explorer.
The Wiki pages are fine using Safari (Mac or Windows) - Firefox (Mac or Windows) and Chrome (Mac or Windows). The problem is only with IE 9.
Out of curiosity - I restored an image of my server from last week - prior to the Server App 2.2 udpate - and Wiki (from version 2.1.x) pages work fine in Internet Explorer 9. (At this point I'm not sure if it is just IE 9 - or other versions of IE.
Additionally - if I disable the Wiki - and just enable the default website - the default website displays fine in IE 9 - but as soon as I click on "change password" at the bottom of the page - the Enter Old and New Password window - also does not display - similar rectangular box - with just Change Password text in it.
So the problem is not just with the Wiki. Unfortunately I do not have any websites set up yet to test with.
Here is what I see (in IE 9) on the main Wiki page as of version 2.2 of the server app:
Is anyone else experiencing this? I will probably open a support issue - because my brand new Mac Mini is covered under AppleCare.
~Scott
Message was edited by: SBeattie2 (Reinserted Screen Print)

If I save the page as a web archive and then open it MS Word - I see the following text at the bottom:
<div class="noscript"> To use wikis, enable JavaScript.</div>
JavaScript is enabled - via Tools / Internet Options / Security - the checkbox for Active Scripts is set to enabled.

IWeb Page Navigational Links not working with Internet Explorer 7

I'm hoping someone can help me out here? My wife created her 1st website using iWeb. I am testing the sites functionality before we publish it. All the pages and links work fine on Firefox and Safari for windows. However, the page navigational links are not working on Internet Explorer 7. All I see is a dot to the left side of where the page links should be. When I start the site in IE7 I get an Active X script warning and I am asked if I want to allow the script to run; to which I reply yes. After I allow the Active X script the dot to the left side of where the page links should be disappears, but the links do not appear.
Is there anyway to resolve this? Most of the members of her club have Windows based PCs and are using IE7.
Message was edited by: cviz821

Yes, Javascript is running on IE7 and other java script applets appear to be working with the exception of the Navbar script.
It would be great if my wife's friends used a "real" browser, unfortunately 70% of the people on the web use IE7, so this is a real concern if we can't get this to work. I'v seen other iWeb site on IE7 that seem to function fine, so I'm not sure what the issue is here.
Message was edited by: cviz821

AOL Broadband, will connect to laptop, but not connect to internet explorer. WRT54GS v.6

I can connect to my wireless network via my laptop, but not to internet explorer. We have changed every setting imaginable and re-set the modem, router many times. We Ip configed, did ping tests, installed and re-installed the card in the laptop. Done all this 4 times with the tech support from Linksys. Finally, I realized it must the wireless router and/or modem configuration. (The laptop works on every other network in town except ours, and has not security settings enabled).
I have been on customer service calls for 2 weeks, with AOL and linksys and nothing seems to be helping me. I have 2 wireless routers (thought the first was bad, so bought another brand new), and just had a brand new modem installed. Basically, I have brand new equipment.
The laptop has no security settings and connect to any wireless network in town. It finds the connection to my WRT54GS v.6, but will not connect via internet explorer.
I want to uninstall and re-install the router. How do I uninstall the router? (I have instruction for re-installation). Also AOL rep told me, to make sure I configure the router to a certain port range. Any ideas as to how to do this?
Anyone have problems with AOL high speed and linksys router? Has the high speed cable cord coming out of the wall, not ethernet or DSL.
We have changed the settings in http://192.168.1.1 till I am blue in the face. None of the channels worked, security didn't work, adding the ip address manually to the laptop didn't work. I am getting no error messages. Am trying to get this wireless modem working because I need it. Should have come to this forum first!

hi..if you want to uninstall the router...the only thing you need to do is hold the reset button down for 30 seconds...
i m a bit confused here as to why the ISP techs asked you to forward ports on the router...port forwarding is needed for a specific application or a device that is behind the router....
the mentioned ports are for AOL messenger ( AIM )....and has nothing to do with the modem...anyways , let us work out together on this issue...carry out the steps i mention and you can revert back with the results and your success rate...
1) connect the computer to the modem and check what ip address you have on the computer ??
2) go to start -> control panel -> network connections ->
let me know what other icons you have besides Local Area Connection and Wireless Network Connection..
3)connect the computer to the router and the router to the modem...
access the router using http://192.168.1.1 .. let the internet connection type be on DHCP....check the ip address on the status page of the router ui...
4) if it is 0.0.0.0 , go to setup tab and go to mac address clone subtab , enable it and hit clone..save the settings and do a power cycle...
5) check whether you have the ip address...if you have the same ip as coming off of the modem..u should be online and if still 0.0.0.0 , then select PPPoE for the internet connection type and enter the username and password...check whether the ip address comes up....if still negative, ensure that the modem is in bridge mode...
6)if the ip address comes up as 192.168.1.x , change the local ip add of the router to 192.168.2.1 and do a power cycle..
let me know for any help !!!

Image does not appear in Internet Explorer but displays in Firefox

Hi All,
I have an image in my page in the header section.
The problem is that the image displays in Firefox but does not display in Internet Explorer.
Thanks in advance.
Best Regards
Arif Khadas
Application Express 4.0.1.00.03
Edited by: Arif Khadas on Feb 13, 2011 2:29 PM

Hi Jari,
Thanks for the reply.
This is the code that is in the Region Source of the Header Section :
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr width="100%" align="left" valign="top">
<td align="right" valign="top">
   <a href="http://www.bridgesinfotech.com/"
    <img src="#APP_IMAGES#header.jpg" alt="Bridges Information Technology" WIDTH="1000" HEIGHT="125">
   </a>
</td>
</tr>
</table>

Robohelp 11 - updates to web page not visible in Firefox...ok in other browsers

Hi
We use Robohelp 11 to create help pages.
Often we notice that when we make changes and republish a page, the changes take a while to be visible in Firefox and Chrome, but tend to be immediately visible in Internet Explorer.
On this occasion we changed a page around two months ago (updated links for new embedded YouTube videos). I can see the new videos in Chrome and IE, but still see the old videos in Firefox 31.0, despite having cleared my cache.
Worried that users won't see updates.
Anyone experienced similar?
thanks
V

Perhaps something in the link below helps?
Force cache refresh for my website | Firefox Support Forum | Mozilla Support
Cheers... Rick

Help Flash player will not run in Internet Explorer 11?

I have downloaded Adobe Flash Player and it will not run in Internet Explorer 11. I have done the things suggested in the help/forum section. What else can I try?

This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

Inserted html not showing in Internet Explorer

Inserted html code does not show in internet Explorer 8. Is OK with Firefox, Safari and Chrome. Site is munroestudios.com. Also made a a test page with just the html on munroestudios.com/test.html. This is a iframe code received from another company to link to another site.

I'm not sure what they did but the company supplying the html code fixed something on their end. Works now.

My h:commandButton is not working on Internet Explorer not FF

Can anyone help to findout what could make h:commandButton not working in Internet explorer and not in any other browser like Safari, Netscape and Fire Fox.
My application is having this problem currently with IE only. I have also tried calling the action of the form from javascript.
To make it more clear, the page doesn't even get to the validation phase, so wrong entries on the form don't get validate and page not submitted.
help please
Michael E.

Thanks for the response,
I discovered that it was one of the modal child windows generated by JS thats the cause. But what should the interference between the child window and the JSF parent page.
Michael

Gallery slideshow not showing in Internet Explorer

I am new to Dreamweaver.
I created a slideshow in Photoshop's Gallery section and used a div and iframe per tutorial instructions.
I use a MacIntosh. It looks great on Firefox and Safari.
It is not working in Internet Explorer.
Please advise.

Does this help?
<HTML>
<HEAD>
<META NAME="GENERATOR" CONTENT="Adobe PageMill 2.0 Mac">
<TITLE>Browns Photography's Children's Gallery</TITLE>
<style type="text/css">

</style></HEAD>
<BODY BGCOLOR="#ffffff" BACKGROUND="background.gif" text="#000000" link="#330099" vlink="#666666" alink="#660000">
<TR>
<TD WIDTH="100%"><CENTER>
<p> <IMG SRC="images/logo.gif" ALIGN="BOTTOM" BORDER="0"></p>
            <p align="center"><font face="Arial, Helvetica, sans-serif" size="-1"><img src="images/childrens.gif" width="208" height="37"></font></p>
           <p align="left">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<title>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=macintosh">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
      <div id="childrengallery"><a href="childrengallery/">
      <iframe src="childrengallery/index.html" width="800" height="75%" frameborder="0" name="childrengallery"></iframe>
      </a></div>

Mostly websites are not open on internet explorer and other browsers in my laptop

mostly web sites are not open in internet explorer and other web browsers in my laptop.

Rob,
Many thanks for your reply. It is appreciated greatly. I have added text against each of the points that you raise.
troubleshooting Addons is somewhat complex.....as from this side we do not know which addon may be causing the problem, so the
only recourse is to disable the types of addons that commonly cause problems in IE (for security and usablility reasons some older addons that you may have used previously with IE8/XP are no longer compatible with newer versions of IE that you are now using)....
The following instructions will stop your Toolbar and Browser Helper addons from loading in IE.
Start>Control Panel>Internet Options>Advanced tab,
uncheck "enable third-party browser extensions".
close any open IE windows and restart IE for the changes to take effect.
[GotaQ: Yes, did this but the problem then is that IE won’t open for me. There is no icon in the start menu or task bar
and routes such as using a command prompt or ‘run’ instruction don’t work. When I try this I get a window on screen that flickers for a bit and then disappears.]
Alternatively, your problem with keyboard input is most likely being caused by a form filling addon or a finger print reader
addon? Note: some addons like the Google toolbar have multiple features like form filling, you can disable the GTB's form filling features from its settings dialog (click the 'spanner' icon on the toolbar)
Use Tools>Manage Addons>Show all addons to locate any such addons and use the Addons Manager to disable them. (close and
reopen any open IE windows for the full changes to take effect).
[GotaQ: I tried disabling all of the add-ons in Google Chrome and the key-stroke mapping problem persisted, unfortunately!]

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

WRV210 Administration pages not visible in Internet Explorer

Similar Messages

Maybe you are looking for