WRV210 Inside out? How to?

Hello,
I have a linksys WRV210.
To get the Quick VPN to work, we add to upgrade firmware to lastest 1.0.39. We can now setup VPN to work properly from outside in.
This issue now is that we can't be VPN client of an outside network.
We tried many things and the only thing that worked is to go back to the old version of firmware.
Any Ideas?
Thanks

Hello juunda ,
I'm doing this for futur owners of this unit but I already bought something else. I will try to explain differently.
I have clients that uses VPN to connect to my network. They are using the lastest Quick VPN and it finally works with the last firmware upgrade. So, from outside to connect to the inside. It is OK. I am happy.
I also have to connect to Client's network using CISCO VPN client V5.0.07.0410. Since that last firmware upgrade, this does not work. So from inside to connect to the outside, it is not OK. I'am not happy.
We are using XP sp3 but as for our clients, name it, they have it.
We also found instability since that last firmware upgrade. We are loosing internet sometimes. To fix it, we have to reboot the router. This happens twice a week.
From an operationnal point of view, this unit as been costly in regards of downtime and troubleshooting time. Even if I pay 20 times this unit cost, I will still save money buying something better.
I thank you for you help and hopefully, you guys will fix this for actual and futur owners of this unit.

Similar Messages

I have an app labeled productivity. It has taken notes and iTranslate inside. How do I get them out?

I have an app labeled productivity. It has taken notes and iTranslate inside. How do I get them out?

You shoudl really read the manual.
You move them as you would any other app.
iPhone User Guide (For iOS 5.1 Software)

Can't figure out how to enclose text in a rectangle, as I used to do in Word... any ideas?!

Can't figure out how to enclose text in a rectangle, as I used to do in Word... any ideas?!
thanks!
Gary Eskow

Pages doesn't let you separately set border offsets, Indesign is the only application I know that can do that.
You can get the effect with margin insets inside a Text box or offsets inside a Border.
Inside both the Textbox and Border move the margins of the Text inside to have the Text where you want it relative to the border/stroke.
When looking for a solution there is usually more than one way to look at the problem itself.
Peter

Can't figure out how to add bars to reformat 16:9 video to fit a 4:3 frame

Hi all, I'm a long-time user of iMovie 5, and a professional Avid video editor. On my home computer, however, I have some serious issues using the "dumbed down" version of iMovie '08 which, unfortunately, it seems I must use if I want to avoid purchasing new software, and don't feel like trucking my personal work to the office.
Usability issues aside, I'm at a total loss as to how to reformat my imported video clips. At the moment I have a .dv file which is exported from FCP in a 16:9 format. I want to take this into iMovie '08, format it to fit a 4:3 window, add it to a bunch of other clips, and export a finished 4:3 movie to then put on DVD.
Importing is fine, editing is meh but works (sorry, I'm a snob), and exporting works fine, but I can't for the life of me figure out how to put a reformat on the video. The goal is to have black bars on the top and bottom of the video image, squeezing the anamorphic 16:9 video down so that people don't look vertically stretched in a 4:3 window.
What I do NOT want to do is crop out any of the video footage. The goal is to keep all of the video, and just add the black to the top and bottom in order to make it look, well, normal. For the life of me, I can't figure it out. it looks like this would be something that the Crop / Fit tool does, but that won't let me extend the fit outside of the frame of the video, nor will it let me put a 16:9 fit inside of the 4:3 viewing window (I only have a 4:3 option when in 4:3 mode, and only have a 16:9 option when in 16:9 mode).
Thank you very much for your insight.
PS: Just as an aside, why on earth did apple move iMovie '08 away from timeline-based editing? The old iMovie versions were quite powerful editing suites in their own right - even with limited video and audio layers. The '08 version seems to just hate users who want to do anything remotely close to frame-specific edits.

I guess I've got to add the flags back in somehow? The weird thing is that the movie is the correct aspect ratio in iTunes and Quicktime, just not iMovie '08.
iTunes, QT Player, and previous versions of iMovie all relied on the "Current Display Size" setting to set the aspect ratio. (I.e., you can modify this setting and change the aspect ratio by merely changing the display size in QT Pro and re-saving the file for these apps.) Unfortunate, iMovie '08 looks for the flag for the main display/export, and, if Apple hasn't changed things, uses the "current display size" to set the aspect ratio of the thumbnails... Weird.
How would I add those flags back in? Can I just open in quicktime and save a new copy? Or am I going to have to contact the original source of the material and have him export it again (with different settings? And what settings would those be? He's coming from FCP).
If the content is of exceptional quality, you could try re-exporting it in MPEG Streamclip using the "Export to DV..." option. This will re-flag the file with the aspect ratio you select in the export window. Also, be advised that performing destructive edits in iMovie '08 that forces the data to be re-written to new containers will lose the flag in the process unless Apple has made some recent changes to avoid this.

Help figuring out how to tell if an object is within a dynamically made circle

Hello Everyone,
I am currently in the middle of working on a project but sadly I am having a bit of trouble getting a few things figured out.
Essentially what the project consists of is I have random balls appearing on the screen and moving around and I need to make it so that the user is able to draw a circle around the ball (may be more than one) and have that balls dissapear and count the number of balls circled.
This project is being done in flash builder 4.5 and is being made for the android platform as part of a senior project.
At this point this is where I am.. I have been able to randomly create the balls and give them a random movement. I have also been able to figure out how to allow the user to draw on the screen.
What I am trying to figure out is how to make it so that if the user draws a circle around the balls make it so that I know these balls have been circled and make them dissapear and have the number of balls inside the area calculated.
I have thought about making the entire background a grid and make it so that I can track somehow the line made by the user and then track the coordinate of the balls then if it is within that area it means that the ball has been circled but I would like something more efficient than that.
I apologize if it is unclear for what I am looking for but a simple description is I am making a simple game where you are able to circle a moving item on screen, then once it is circled the item disappearsand you gain a point.
Any help would be greatly appreciated.

that's non-trivial. just determining if your user drew a closed curve is non-trivial. then deciding what's inside and what's outside that curve is non-trivial.
that's not to say it can't be done or even, that it can't be done with flash. it can. but you're not going to get a short paragraph answer to this one unless there are significant assumptions you can use to simplify the problem.

Can't figure out how to create an update form in a cfwindow tag

I finally was able to figure out how to do an add form inside
of a cfwindow tag yesterday. But I want this form to be
multipurpose, and allow edits as well. But for the life of me, I
can't figure out how to pass a row of data to the form inside a
cfwindow. Normally, I'd pass the primary key via the URL but if I
try to do that here, it basically reloads the page and closes out
the cfwindow since I have the window set to not show by default.
My page has a list of departments. My page is called
departments.cfm. For each row in the department list, there is a
link called edit. When the user clicks this link, I want the
cfwindow to open with the cfform populated with the data from the
department list for the row selected. Sounds simple enough, except
how do I pass the department_id to the form? If my link is <a
href="departments.cfm?id=#department_id#>Edit</a>, the
cfwindow tag displays and I can see the data in it, but then closes
right away. I finally figured out that it was calling the page
again and the cfwindow is closing because I have it set to not
display by default. I'm about ready to drop this cfwindow and just
do real popup windows via javascript. And I'm normally not in favor
of doing popup windows, but the application I'm working on doesn't
have enough real estate on the screen to do a hidden form, so a
separate window containing the form is my best solution.
Anyone have any suggestions?

Well, this is kind of a tough one for me, but it sounds like
the best way will be to launch a JavaScript function everytime the
user clicks the link, like this:
<cfoutput query="getDepartments">
<a href="javascript:showWin(#yourID#)">show
window</a>
<br>
</cfoutput>
the showWin function will both create the window and launch
it, passing in the user chosen var:
function showWin(id) {
var URL = 'editDeptPage.cfm?dept_id=' + id;
var winName = 'deptWin' + id;
ColdFusion.Window.create(winName, 'Edit the Department',
URL,
{x:100,y:100,height:300,width:400,modal:false,closable:true,
draggable:true,resizable:true,center:true,initshow:true,
minheight:200,minwidth:200 })
The following line of code is supposedly to make sure that
the window refreshes each time it is launched, by naming it
something new each time:
var winName = 'deptWin' + id;
However, if it doesn't work, I think there's a Window refresh
function in the Ext library but I'm not sure.
Also, in the showWin function, after the Window is created,
you might need this but I'm not sure:
ColdFusion.Window.show(winName)
Talk to you later,
Peter

Can't figure out how to sum only certain dates

Hi all,
Here is my issue: we use numbers to keep a running inventory of pieces in stock, and when a piece sells we mark it with the date sold. I'd love to be able to get a sum of monthly sales, but I can't figure it out. Would someone be kind enough to explain it to me like I was five? Here is a sample of our spreadsheet layout: http://i.imgur.com/sV1RU4s.png
I can easily get a sum for the full column of C, but how do I enter the formula to sum only the sales from April, for instance.
Thanks!!

you can get function descriptions from Apple for free by downloading the function references here:
http://support.apple.com/manuals/#productivitysoftware
you will want to download the formula and function reference.
OK...
sumif() is a function that will sum values in a range based on a condition
sumifs() is a similar function where multiple conditions
both functions look at each row and only sum the values in a particular row when the condition(s) are all met.
=SUMIFS(B,C,">="&E2,C,"<="&EOMONTH(E2, 0))
let's work from the inside out...
EOMONTH() returns the last day of the month you pass if offset by some number of months. In this case I asked it to give the last day of the same month I passed in so the offset is 0. The month I passed in is stored in E2.
the basic concept is I only want to sum values in column B when the date in column C is in a paricular month. said another way... I want to sum values in B where the corresponding date (in the same row) of column C is greater than or equal to the 1st day of the month AND is it also less than or equal to the last to of the month.
SUMIFS() has several arguments a range to sum followed by a pair of arguments (test values range and a condition):
SUMIFS(<SUM_RANGE>, <TEST_RANGE1>, <CONDITION1>, <TEST_RANGE2>, <CONDITION2>, etc )
the sum range is column B
test range 1 is the date column (column C)
the condition is ">="&E1 which concatenates ">=" with the date in cell E1 to make a condition ">=Jan 1, 2013"
test range 2 is the date column (column C)
the condition is "<="&EOMONTH(E1, 0) which concatenates "<=" with the date corresponding to the last day of the monthe in cell E1 to make a condition "<=Jan 31, 2013"
I hope this helps

Having issues finding out how many bytes are sent/recieved from a socket.

Hello everyone.
I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket.
My server program accepts a string (an event) and I parse that string up, gathering the relevant information and I need to send it to another server for more processing.
Inside my server program after receiving the data ( a string) I then open another port and send it off to the other server. But I would like to know how many bytes I send from my server to the other server via the client socket.
So at the end of the connection I can compare the lengths to make sure, I sent as many bytes as the server on the other end received.
Here's my run() function in my server program (my server is multi threaded, so on each new client connection it spawns a new thread and does the following):
NOTE: this line is where it sends the string to the other server:
//sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
//SERVER
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          //setting up sockets
          Socket outputServ = null;
          //create a message database to store events
          MessageDB testDB = new MessageDB();
          try {
               //setting up channel to recieve events from the omnibus server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               //This socket will be used to send events to the z/OS reciever
               //we will need a new socket each time because this is a multi-threaded
               //server thus, the z/OS reciever (outputServ) will need to be
               //multi threaded to handle all the output.
               outputServ = new Socket("localhost", 1234);
               //Setting up channel to send data to outputserv
               PrintWriter out = new PrintWriter(new OutputStreamWriter(outputServ
                         .getOutputStream()));
               String input;
               //accepting events from omnibus server and storing them
               //in a string for later processing.
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
                    System.out.println("Waiting for data...");
                    //---------putting string into a message object-------------///
                    // creating a scanner to parse
                    Scanner scanner = new Scanner(input);
                    Scanner scannerPop = new Scanner(input);
                    //Creating a new message to hold information
                    Message msg = new Message();
                    //place Scanner object here:
                    MessageParser.printTokens(scanner);
                    MessageParser.populateMessage(scannerPop, msg, input);
                    //calculating the length of the message once its populated with data
                    int length = msg.toString().length();
                    msg.SizeOfPacket = length;
                    //Printing test message
                    System.out.println("-------PRINTING MESSAGE BEFORE INSERT IN DB------\n");
                    System.out.println(msg.toString());
                    System.out.println("----------END PRINT----------\n");
                    //adding message to database
                    testDB.add(msg);
                    System.out.println("-------Accessing data from Map----\n");
                    testDB.print();
                    //---------------End of putting string into a message object----//
                    //sending the string version of the message object to the
                    //output server
                    out.println(msg.toString());
                    System.out.println("Waiting for data...");
                    out.flush();
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               out.close();
               outputServ.close();
               csocket.close();
          catch (SocketException e) {
               System.err.println("Socket error: " + e);
          catch (UnknownHostException e) {
               System.out.println("Unknown host: " + e);
          } catch (IOException e) {
               System.out.println("IOException: " + e);
}Heres the other server that is accepting the string:
public class MultiThreadServer implements Runnable {
     Socket csocket;
     MultiThreadServer(Socket csocket) {
          this.csocket = csocket;
     public void run() {
          try {
               //setting up channel to recieve events from the parser server
               BufferedReader in = new BufferedReader(new InputStreamReader(
                         csocket.getInputStream()));
               String input;
               while ((input = in.readLine()) != null) {
                    //accepting and printing out events from omnibus server
                    //also printing out connected client information
                    System.out.println("Event from: "
                              + csocket.getInetAddress().getHostName() + "-> "
                              + input + "\n");
System.out.println("Lenght of the string was: " + input.length());
                    System.out.println("Waiting for data...");
               //cleaning up
               System.out.println("Connection closed by client.");
               in.close();
               csocket.close();
          } catch (IOException e) {
               System.out.println(e);
               e.printStackTrace();
}Here's an example of the program works right now:
Someone sends me a string such as this:
Enter port to run server on:
5656
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=5656]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4919,localport=5656] connected.
hostname: localhost
Ip address: 127.0.0.1:5656
Waiting for data...
Event from: localhost-> UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1",424,"9.27.132.139","","Omnibus","Precision Monitor Probe","Precision Monitor","@busch2.raleigh.ibm.com->NmosPingFail",5,"Ping fail for 9.27.132.139: ICMP reply timed out",07/05/07 12:29:12,07/03/07 18:02:31,07/05/07 12:29:09,07/05/07 12:29:09,0,1,194,8000,0,"",65534,0,0,0,"NmosPingFail",0,0,0,"","",0,0,"",0,"0",120,1,"9.27.132.139","","","","dyn9027132107.raleigh.ibm.com","","","",0,0,"","","NCOMS",424,""
Now my program makes it all nice and filters out the junk and resends the new string to the other server running here:
Enter port to run server on:
1234
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=1234]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4920,localport=1234] connected.
Parser client connected.
hostname: localhost
Ip address: 127.0.0.1:1234
Event from: localhost-> PacketType: UPDATE , SizeOfPacket: 577 , PacketID: 1, Identifer: UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1" , Serial: 424 , Node: "9.27.132.139" , NodeAlias: "" , Manager: "Omnibus" , Agent: "Precision Monitor Probe" , AlertGroup: "Precision Monitor" , AlertKey: "@busch2.raleigh.ibm.com->NmosPingFail" , Severity: 5 , Summary: "Ping fail for 9.27.132.139: ICMP reply timed out",StateChange: 07/05/07 12:29:12 , FirstOccurance: 07/03/07 18:02:31 , LastOccurance: 07/05/07 12:29:09 , InternalLast: 07/05/07 12:29:09 , EventId: "NmosPingFail" , LocalNodeAlias: "9.27.132.139"
Lenght of the string was: 579
The length of the final string I sent is 577 by using the string.length() function, but when I re-read the length after the send 2 more bytes got added, and now the length is 579.
I tested it for several cases and in all cases its adding 2 extra bytes.
Anyways, I think this is a bad solution to my problem but is the only one I could think of.
Any help would be great!

(a) You are counting characters, not bytes, and you aren't counting the line terminators that are appended by println() and removed by readLine().
(b) You don't need to do any of this. TCP doesn't lose data. If the receiver manages get as far as reading the line terminator when reading a line, the line will be complete. Otherwise it will get an exception.
(c) You are assuming that the original input and the result of message.toString() after constructing a Message from 'input' are the same but there is no evidence to this effect in the code you've posted. Clearly this assumption is what is at fault.
(d) If you really want to count bytes, write yourself a FilterInputStream and a FilterOutputStream and wrap them around the socket streams before decorating them with the readers you are using. Have these classes count the bytes going past.
(e) Don't use PrintWriter or PrintStream on socket streams unless you like exceptions being ignored. Judging by your desire to count characters, you shouldn't like this at all. Use BufferedWriter's methods to write strings and line terminators.

How do I find out how much memory is in an eMac with no hard drive?

I purchased a used old eMac G3 and am a PC guy only. I bought it from someone who told me that there is 512mb of RAM in it, but I want to confirm this. Is there a way to get into the BIOS for eMacs? I just want to find out how to check how much RAM is inside.

Can the drives on them read DVD-RWs? What about dual layer DVDs?
Depends on what that sticker says, assuming the drive has not been replaced. It's hard to say with eMAcs; becasue they were an edu-model, they probably have more optical drive posibilities than any other Mac. Some even shipped with NO optical drive, presumably to prevent students from bring software from home.
The MacTracker database (free from http://mactracker.ca/) lists the following possibilities for optical drives in a 1.25G eMac:
None, CD-ROM, DVD/CD-RW Combo, or 8x SuperDrive
Also more tech info here:
http://www.everymac.com/systems/apple/emac/stats/emac_1.25.html
The combo drive reads DVDs. Reading DVD=RW may depend on where they were burned and the media brand. The next model, the 1.42Ghz, shows the SuperDrive as dual layer; no such entry for the 1.25G.
If you are thinking about burning a system disk from another computer, be aware that almost never works on Macs.

Trying to figure out how to use a video's alpha channel to define its hitspace for a button

Hello, I'm trying to figure out how to use a video's alpha channel to define its hitspace for a button. I would greatly appreciate anyone's help with this.

Currently I'm doing an image sequence inside of a movie, and putting the movie in the button. I hope that's what you're asking. Not sure if I entirely understand your question. (Been a little while since I used the interactive side of Flash)
Anyway if you have a specific process that you personally do that works I'd happily conform to your solution.

I keep getting a message on my phone that i need to update my email password. I can not figure out how to do this.

I keep getting a message on my phone that i need to update my email password. I can not figure out how to do this.

Hi there!
Not knowing anything more than what you've posted (e.g., email provider, text of the request, etc.), we can only surmise that this must be the password revalidation that HotMail and other providers send out on a periodic basis. Here is the KB that discusses what to do:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13137
Hopefully that will help you.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT201269 Trying to figure out how to transfer my ringtones from my 4s to my 5, do anyone know how? Ringtones only everything else transferred.

Trying to figure out how to transfer my ringtones from my 4s to my 5, do anyone know how? Ringtones only everything else transferred.

Hi Friend,
You need to connect your iPhone in your computer and open iTunes.
1. Place your rintones file (.m4r format, up 30 seconds) to a designated area (e.g. desktop)
2. Import your ringtones file into your LIBRARY, NOT directly into your iphone.
3. "TONES" or "RINGTONES" icon will appear on the left hand column under LIBRARY. (You should see Ringtones there. If not..... Click Edit --> Preferences --> General Icon Ensure that Ringtones is checked. If not, check it then click OK…)
4. Drag your ringtones file from your LIBRARY into your iphone.
5. "TONES" or "RINGTONES" icon will appear in your iphone under devices (the tab where Summary, Info, Apps, etc are located)
6. Click Under "TONES" or "RINGTONES" (as mentioned in Fifth) and tick SYNC tones.
7. Look inside your iphone... and there it is
*Set Message Notifications:
Settings > Notifications > Messages >
     Notification Center: ON
     Show: choose 1/5/10 Recent Items
     Alert Style
          choose Banners or Alerts
     Badge App Icon: ON
     Show Preview: ON
      Repeat: choose up to 10 times
     Show iMessage Alerts From:
          choose Everyone/My Contacts Only
     View in Lock Screen: ON
To see Notification Center, on Home Screen where your apps icons are, swipe from the top to the bottom.

Cannot work out how to access my photos on icloud or on my pc?

cannot work out how to access my photos on icloud or on my pc?

You cannot view Photos stored on your iCloud by visiting iCloud.com but to view iCloud Photos on your Computer you will need iCloud Control Panel for Windows to be downloaded and installed on your computer and Enable Photostream on your iOS Device. For more details on how to Enable PhotoStream and use iCloud Control Panel go through the link below.
http://support.apple.com/kb/ph2605
By default, photos are automatically downloaded to the My Photo Stream folder inside the Photo Stream album in your Pictures library, and uploaded from the Uploads folder inside the Photo Stream album in your Pictures library.

Inside out Approach in XI

Hi all,
1.) How is Inside out Approach Different From Outside in approach in XI?
2.) Do we have proxies coming into picture in Inside out approach.?
3.) SAP uses only Outside in ..! why not Inside out approach..?

Hi,
just have a look at this quote given by Michal in other thread..
You can use the following approaches when developing interfaces:
· Outside-In: You can develop new, platform-independent message interfaces by using the Integration Builder. Message interfaces are based on the WSDL standard Web Services Description Language), an XML schema for describing network services. Using this description, you can generate platform-specific proxies in Java or ABAP that you can then use to implement the actual message exchange.
· Inside-Out: You can connect interfaces from SAP and non-SAP systems to SAP Exchange Infrastructure by using adapters. The Integration Builder can import interface descriptions in XML format for BAPI, RFC, and IDoc interfaces from SAP systems Release 4.0 or higher.
from:
http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
basically it's all about where you start developing
your interfaces either in XI (and later one in the
system - by proxies ) or in system first and then you try to match
to this interface in XI (by importing IDOCs, RFC, external definitions etc.)
Regards,

Outside-In vs Inside-Out (Proxies vs Adapters)

Hi all,
can anybody tell me about outside-in and inside-out development approach?
What meaning have "outside" and "in" by outside-in? and "inside" and "out" by inside-out? I have read, that the first one are used by proxies, the second - by adapters.
But I don't really know, how I should understand this "outside" and "inside"?

Hi,
just have a look at this quote:
You can use the following approaches when developing interfaces:
+· Outside-In: You can develop new, platform-independent message interfaces by using the Integration Builder. Message interfaces are based on the WSDL standard Web Services Description Language), an XML schema for describing network services. Using this description, you can generate platform-specific proxies in Java or ABAP that you can then use to implement the actual message exchange.
· Inside-Out: You can connect interfaces from SAP and non-SAP systems to SAP Exchange Infrastructure by using adapters. The Integration Builder can import interface descriptions in XML format for BAPI, RFC, and IDoc interfaces from SAP systems Release 4.0 or higher.+
from:
http://help.sap.com/saphelp_nw04/helpdata/en/ba/d4c23b95c8466ce10000000a114084/content.htm
basically it's all about where you start developing
your interfaces either in XI (and later one in the
system - by proxies ) or in system first and then you try to match
to this interface in XI (by importing IDOCs, RFC, external definitions etc.)
Regards,
michal
XI / PI FAQ - Frequently Asked Questions

WRV210 Inside out? How to?

Similar Messages

Maybe you are looking for