WRV54G Slow Wireless Connection Speeds

Good Afternoon,
I purchased a WRV54G recently to replace my WRT54G as I needed to run a road-warrior VPN setup. This for the most part works fine overall using QuickVPN.
The issue I am having is the connection speeds I am getting when my local lan PC's connect wirelessly to the WRV54G router. For some reason I can never get a connection over 11.0 MBS while using the WRT54G I always got 54.0 MBS which I would expect since all PC's are running 802.11G cards.
I did upgrade to the latest firmware on the site thinking this may have be the issue, this however did not help. The other thing I noticed was if I place the router in a G Only state, no wireless PC can connect to the router.
Any help would be appreciated. It is odd I get full 54.0mbs connections using the WRT54G, but when using the WRV54G I get 11.0mbs. It like it is connection B only which is very odd.
Thanks,
Chris

hi...try out the following wireless settings
on the router's ui , go to " wireless " tab and change the channel - 11 , go to "advanced wireless settings " and change the "Control TX Rates" to 54mbps , beacon - 75 , fragmentation - 2306 and RTS - 2307.....let me know if that works for you...

Similar Messages

Has anybody solved the slow wireless connections speeds of the new Imacs

I have just purchased the new imac...and was made aware of the disastrous connections speeds using wireless.. Does anybody know if apple have come up with a solution...or are they just not dealing with the problem?

I am a brand new Mac user with a new 24 inch iMac purchase. Macs are supposed to be hassle free right? Right. No question I was about ready to throw it out the window because the wireless connection to the expensive AP base station was, oh, 100x slower than my Dell laptop side by side about 1 foot away. Nothing changed even if I connected directly to the AP using an ethernet cable. My connection consists of an Actiontec DSL gateway connected directly to my AP extreme that allows wireless to my PC laptop as well as my new iMac. Hours and hours go by until I find this help link on Mac Orchard Forums:
+" Re: My New Intel Based iMac is SLOW+
+« Reply #7 on: May 18th, 2007, 4:57am » Quote Quote Modify Modify+
+WOW!! everyone else with this problem read this! i was having these same huge speed problems using the internet with my new 24" dual core intel imac with 2 gigs of ram and found a posting on another site's thread that fixed it completely.+
+"Try setting your DNS servers to OpenDNS (208.67.222.222 and 208.67.220.220) and see if that helps at all. Maybe the ISP's changes increased the load on their DNS servers."+
+my guess is that somehow these DNS servers work the way tiger likes them to while others dont, i have no clue other than to say it works!!+
+heres a site i found that helped me understand how to change the settings:+
+http://portforward.com/networking/static-Mac10.4.htm "+
With the new Leopard installed I went to the "portforward" link first and followed the instructions exactly to set a static IP address, then I reset my DNS servers with the exact numbers you see above - IT WORKED IMMEDIATELY!!!!! I didn't have to call my ISP or anything, it just worked exactly as it should with both Safari and Firefox. Now this Mac is flying and I will not be tossing it back to Jobs.
Good Luck!

Slow wireless connection 802.11n AEBS and Intel Core 2 Duo MacBook Pro

I have three Macs all currently connected wirelessly to the new 802.11n AEBS.
Mac #1 - PowerMac G5
Mac #2 - 17" MacBook Pro Intel Core Duo
Mac #3 - 15" MacBook Pro Intel Core 2 Duo
The wireless connection speed (when using the web browser) is fine for both Mac #1 and Mac #2 but noticable slower for Mac #3. All three Macs are sitting right next to each other. All three Mac are getting an excellent signal. All three Macs are running the same version of the OS. All three Macs have identical network setting (as far as I can tell).
When connecting Mac #3 to the AEBS via an ethernet cable, performance is good. I've also tried configuring the channel manually in the AEBS to channel #1 but this did not help (seemed to help others in a different thread). Additionally, I ran the 802.11n enabler and performance was bad both before and after its installation.
Any idea why the Intel Core 2 Duo MacBook Pro would be performing differently?

Ok eveyone. I did some digging and was able to get the network speed back with my Core2Duo machine. I put the Airport Extreme into Bridged mode and connected the Ethernet cable to one of the LAN ports, not the WAN port. After that everything works great. for more information check out this lengthy thread...
http://discussions.apple.com/thread.jspa?messageID=3989864&#3989864
and this site mentioned...
http://www.macintouch.com/reviews/airportn/#performance
Apparently the new base stations have a few issues that need to be worked out so I'd consider this a workaround. There should be no reason to have to do this. Good luck.

One Solution for Fixing Slow Wireless Connection

Quick and easy solution for slow wireless connection.
My hardwired PC connection was working fine over FIOS, but my wireless connection through my Macbook Pro was soooo slowwww, although the machine itself was fine. Pages would take forever to appear, then finally sort of pop up. Didn't really seem to be a Mac problem, just a connection problem.
After searching forever to find a fix, I found a quick & easy solution that works at least for now: change your DNS address.
I'm not a techie so I don't know ALL of the implications of doing this, but in desperation, it has worked for me and I think at no risk to your network or machine. Changing my DNS address has made my connection blazing fast and relieved many weeks of frustration.
HOW: I can only share how to change on a Mac. (Please chime in if you can give directions for PC. ) Just go to this Apple support page, which will outline exactly how to do it. I used 4.2.2.2, I think you can also use 4.2.2.1 as the DNS address. http://support.apple.com/kb/TS2002
Other resources I've found follow:
(specific to FIOS): http://www.stationstops.com/2008/04/16/high-speed-internet-3-tips-to-optimize-your-verizon-fios-broa...
(Specific for Mac): http://forums.macrumors.com/showthread.php?t=358919
Maybe this is a commonly-known fix but it wasn't for me, so hopefully it will help some of the other less-than-technical people out there. Good luck!

Actually this is a common problem with Mac OSX (http://rubyisbeautiful.com/2008/2/8/osx-dns-fix-update) and how it does DNS lookups and pertains to routers that provide the internal gateway (i.e. 192.168.1.1) as the DNS address which is what the ActionTec does by default.
You can change that at the router level to either push out Verizon's dns that the router then uses or any other open dns server. I had to do this a long time ago for some of the OS X boxes on my network.

WRT54G - Slow wireless connection

Hi,
I installed WRT54G router last week for my wireless connection. Right form the very first day, i have been seeing slow/sporadic connection speeds. I also upgraded my firmware version (8.2) & it doesn't help. I have given the output of IPCONFIG /ALL for your reference. Please guide me if you find anything odd.
Windows IP Configuration
        Host Name . . . . . . . . . . . . : venki
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : hsd1.ct.comcast.net.
Ethernet adapter Local Area Connection:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC
        Physical Address. . . . . . . . . : 00-0A-E4-D5-26-CA
Ethernet adapter Wireless Network Connection:
        Connection-specific DNS Suffix . : hsd1.ct.comcast.net.
        Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection
        Physical Address. . . . . . . . . : 00-12-F0-D0-2B-5F
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 192.168.1.101
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DHCP Server . . . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 68.87.71.226
                                            68.87.73.242
        Lease Obtained. . . . . . . . . . : Thursday, July 17, 2008 11:49:44 AM
        Lease Expires . . . . . . . . . . : Friday, July 18, 2008 11:49:44 AM

Not sure if you performed this or not, once you do a factory reset, immediately after that you are suppose to perform a factory reset by holding is the reset button in on the back of the linksys router for 30 seconds, then wait about 2-3 minutes for the router to sync back up.
Important = Write down your previous settings in the router as they will be erased and you will have to manually input the info.
Hope that this will help,
Ttech
If not, try this
Here are some steps to follow for a slow or poor connection.
1.      Give your network a unique SSID and do not use Linksys and set your SSID Broadcast to enable.
2.      You can also try A different channel. There are 11 channels and 1, 6 or 11 is better
3.      You can try raising your router approximately 4-6 feet above the floor and make sure the antennas are vertical.
4.      access your wireless software by going to your Profile or preferred networks, if any are named Linksys or ones that you do not know please delete them. Go to the settings or properties and check the information to make sure it is correct.
5.      See if there are any updated drivers to download.
6.      Try to use WPA encryption if you can
*** As always upgrade to the latest firmware
Good luck,
Ttech

Dropping Wireless Connection & Speed Slowing Down

Hi,
Up until a week ago I had two BT lines, I will call them line 1 and line 2. Line 1 (front room) was used purely for phone calls, and line 2 (middle room) had Broadband activated on it. When it came time to renew the yearly line rental I checked and had it confirmed by BT that the available Broadband speed was faster on line 1, so I decided to cancel line 2, and move my Home Hub 4 into room 1 having arranged to activate Broadband on what in theory should be a line that gives a better speed.
My current problem is two-fold. Firstly I am not yet getting the line speed that I was expecting. I have spoken to the Technical Help Line, and understand that following the activation of Broadband on the line in Room 1 I should wait 10 days for the available speed to stabalise. Currently I am 7 days on from line activation.
A few days ago I was getting download speeds around 2.70 Mbps, with upload speeds around 0.38 Mbps. The IP profile for the download speed at that time was set at 2.77 Mbps. The IP profile for the upload speed was set at 0.45 Mbps. Over the past week I have done numerous speed checks and found that the speed did vary, as might be expected, but was generally always around these figures. Because of the line check speeds I was given by BT's own staff I was expecting the available speed to get better, not slow down! I was originally advised to expect line speeds of between 3.5 Mbps - 5.5 Mbps.
Over the last 24 - 36 hours the speed has slowed down, and a few minutes ago these are the figures I observed:
Download speed achieved during the test was - 1.3 Mbps
For your connection, the acceptable range of speeds is 0.8 Mbps-2 Mbps.
IP Profile for your line is - 1.33 Mbps
Upload speed achieved during the test was - 0.34Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.45 Mbps
Line speed then is one issue, but there is another.
My second, presently very frustrating problem is that even though the Hub 4 is consistently powered, and maintains a steady Blue light showing that Broadband is available, my wireless connection that I receive from the Hub keeps dropping. I should add that the distance from the Hub 4 in Room 1 to where I work with my laptop in Room 2 is only about 15 - 20 feet. I used the old Hub 2 until a few weeks ago, and neither my daughter on her laptop, or myself, had any problems with 'dropping' the wireless signal, whichever room we were in, or even if we used our respective laptops elsewhere in the house. I was convinced enough by the publicity 'blurb' to believe that Hub 4 was more reliable, with fewer drop-outs. So far this has not proven to be the case.
I know that I need to wait a few days more till the 10 days are up, but would really appreciate some kind soul commenting on the above. I have looked at the Logs, but without knowing what segment would be helpful in aiding a diagnosis of my two issues I didn't want to provide unnecessary information. So if any particular element of the Logs would be useful, please let me know.
Yours in hope,
Alan
Solved!
Go to Solution.

Hello again,
With your help I was able to locate the place to change the channel manually, which I did, thanks for that. It only resulted in a marginal improvement, but any improvement is good I guess.
HH4 has now been showing a steady connection for three + days, so, as requested, here are the noise stats:
16:14:16, 26 Nov. ( 76.170000) DSL noise margin: 22.00 dB upstream, 12.20 dB downstream
16:14:16, 26 Nov. ( 76.080000) DSL line rate: 448 Kbps upstream, 3104 Kbps downstream
I have done several speed tests and they all show broadly similar results, namely that my download speed is usually around 2.67, whereas my IP Profile is set at 2.74.
I don't know whether this is worth mentioning but I only have an old style BT socket on my line, not one that has a test socket inside, so I can't do any of the tests using that facility.
Although my broadband connection has been stable and active on the HH4, as far as using wireless to connect my laptop in another room I do still get several dropped connections each day.
Even when I am connected to my HH4 by wireless, and my signal, as now, is only in the four bar bracket, by looking at the other Networks that are active in my street/area I can see, although it is rightly secured, that someone is using a HH3 and the signal on that is powerful enough to register a full five bar (excellent) strength on my laptop. How near or far away from me that user with a HH3 is I do not know, the point is however I can receive a more powerful and consistent signal from their Hub than my own. I must confess to being puzzled by that. What could be the reason?
Is there any further help or guidance that you can give that might assist in raising my IP profile, in the hope that my speed might increase? Or do you have any further suggestions as to how I might reduce the noise on my line to a more acceptable amount, so that my signal might give me a better wireless connection?
Thanks again for any advice or help you are able to give.
Regards,
Alan

WRV54G slow wireless

WRV54G router firmaware 2.39.2 about a month ago started noticing slow internet connections (300Kb). thought it was comcast but after hooking up to a wired port I get speeds of (8Mb). same speed test same laptop. I have excellent signal strength with the wireless. intel wireless card in a lenovo T-60. I connect to other wireless networks and get good speed. This is an old router could just the wireless side fail in this fashon or is there issues with the newer firmware??

You may be getting radio interference with your wireless. This can come from many different sources, such as wireless 2.4 GHz phones (yours or your neighbor's), microwave ovens, or other wireless networks in your neighborhood.
I would suggest the following:
1) If all your wireless devices are wireless g, set your router to "wireless g only". This will help your router to ignore wireless b cards.
2) If you can, check the "properties" of all the wireless systems that you can receive at your home, and see what channel (range 1 to 11) your neighbors are using. You can do this without actually logging on to your neighbor's system. Most of them will probably be using channel 6. Set your router to a channel that is not being used, preferably 11 or 1. (If you don't know what your neighbors are using, or if you have no wireless neighbors, try channel 11 first.) Most newer computers will automaticly adjust to the new channel, but some might need to be told to use the new channel.
3) If you recently got a wireless 2.4 GHz phone, try to locate it away from your router and wireless computer. Some phones can be set to a given channel. If your can, set it to a channel different from the router, preferably at least +5 or -5 from the channel of your router (i.e., if your router is channel 11, set phone to any channel 1 thru 6). If you realize that the problem is your own 2.4 GHz phone, and you cannot correct the problem any other way, replace the phone with a 5+ GHz phone.
Message Edited by toomanydonuts on 10-08-200605:04 AM

Orange Livebox & MacBook Pro Slow wireless connection

Hello,
Looks like we are a lot experiencing a slow or sporadic wireless connection.
I have done all updates, the MBP finds the livebox and connect properly but I have a very slow connection.
Lan connection is working fine and quick.
Please could somebody help me, this is my first Mac, if there is any tips or tricks to get a normal wireless speed.
Cheers.

What kind of wireless router or access point are you using?
Are you getting full signal?
Is the wireless router or access point around anything with a lot of metal or..
since you said that when you connect to your modem via ethernet then you could have a problem with your wireless infrastructure... if you have tested your wireless network with another computer and it works fine or if you went somewhere that has a hot spot then you can determine if there is an issue with your home network or an issue with the wireless card in the laptop...

Slow Wireless Connection

I am having problems with a very slow internet connection, that seems to be getting slower.
Currently we have a DSL Modem connected to a LinkSys DSL Router connected to an Airport Extreme. We have been using this setup for several years.
We run 2-4 laptops of various types...MacBook, MacBook Pro, and 1 Windows. Today, I can hardly get my MacBook to go anywhere.
I went up to my iMac G5 and plugged in the ethernet directly to a port in the router and did a DSL speed test through my ISP and it came back as 4.4 Mbps, about the same as it has since I upgraded speeds last fall.
I then disconnected the ethernet and switched back to wireless, and ran the same test. This time is came back 775 Kbps.
Any suggestions? Thanks!

I am assuming that you are still having the issue with network performance, or at least it has not stabilized.
I would still think Wi-Fi interference to be the potential issue and suggest that you pursue this a bit farther ... if you don't mind.
Again, I would suggest downloading a copy of iStumbler. Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with your MacBook near the base station, note the readings, and then, choose the locations where you will typically use your MacBook to access the Internet.
SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
The SNR, as measured from the MacBook, should decrease as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
SNR Guideline
o 40dB+ SNR = Excellent signal
o 25dB to 40dB SNR = Very good signal
o 15dB to 25dB SNR = Low signal
o 10dB to 15dB SNR = Very low signal
o 5dB to 10dB SNR = No signal
If the SNR is 20dB+ at each of these locations, then you should be getting reasonable performance from your AirPort. If less, either try to locate the source of the Wi-Fi interference or try relocating either the base station or the wireless clients until they are within a 20dB SNR range.

Slow wireless connection after 10.4.11 update

Hi,
I have a 17-inch iMac (2Ghz cpu) and ever since I updated to 10.4.11 my wireless connection has been very slow. I used to have download speeds between 150 and 200 KB, and now I can’t get past 20 or 30 KB. I have an XP laptop right beside the iMac, using the same wireless router and the connection is a lot faster, achieving the 200 KB I used to have with the iMac.
I also used to transfer files a lot faster than I do now. I connect to a pc through smb and transferring files is really, really slow. It takes ages just to begin the transfer, and a 5MB file can take up to 15 minutes. It never took this long…
The connection is quite stable though, it rarely disconnects, so I’m not sure whether I’m having the same problem other users have been posting in the forums. What I do know is that the update messed with my wireless connection.
I’ve tried running Disk Utility’s repair disk permissions, Applejack’s AUTO repair, trashing plist files that I saw in other posts, nothing works.
Anyone with the same problem? Any ideas?
Thanks,
josemagalhaes

Hi again,
I think I found a solution for this. It’s not the best solution, more of a workaround, but it’s been working for me.
Searching other threads, I found this topic about users who had intermittent connection to the internet (http://discussions.apple.com/thread.jspa?threadID=1027382&tstart=0). I tried changing the settings in my wireless router – not Linksys, it’s an Asus WL-520G, but has similar options – and the speeds were up again! SMB file transfers work at good speed, and the internet connection is back to normal.
I’m not sure what these settings are for, but anyway all I did was change the “Beacon Interval” to 50, “RTS” to 2304 and “Fragmentation” to 2305 (I didn’t change the MTU because that seemed to be a PPPoE setting, not wireless).
As I said, it’s not really a fix, because nothing changes in OS X, but anyway it may help some users who’ve been having the same problem.

MacBook Pro 2010: very slow wireless connection

I know a number of people have posted similar questions, but I think I've done everything I can to fix this.
I bought a 13 inch MacBook Pro last week, and found I was getting a very slow connection to my wireless network. OK when I was right next to the base station, but very slow in another room (the room I want to use it in).
I checked with speedtest.net, which showed I was getting download speeds of around 0.3 Mbps - although, curiously, it showed upload speeds of 1.5 Mbps. I ran my old MacBook in the same room, on the same wireless connection, and consistently got speeds of over 10 Mbps. So it can't be the network that's causing the issue.
After an hour on the phone with tech support, I took the Mac back to the Apple Store, where I was unable to get any wireless connection whatever. They exchanged it for a new machine. Worked fine in the store - but when I got it home, I was still getting very slow speeds. The old MacBook still outperforms it by at least a factor of ten. All the system software is up to date.
Is this a dodgy batch? Or has the wireless range dropped considerably with the new MacBooks?
Message was edited by: Steve Caplin

Steve Caplin wrote:
Darin,
You're right - there are a lot of issues about MBP WiFi. I think there's a major problem with it.
If there was a ..."major problem with it" you would see more complaints than wifi just being among the top 10 discussion items in a trouble shooting forum. There are millions of MBP users many of whom, like myself, use wifi every day without issue.
Your statement "They exchanged it for a new machine. Worked fine in the store - but when I got it home, I was still getting very slow speeds." would lead one to suspect maybe interference from some source or a configuration issue rather than a "major problem".
You probably already tried changing the channel, resetting your router, changing the security scheme, elimination possible sources of interference, separating your components (router, computer, external monitor, ...), etc. but maybe starting over with a default configuration will help isolate the problem.

Terribly slow wireless connection.

hi, I have a wireless B router model BEFW11S4 ver. 4. My wireless connection says that it is usually "good" or "very good", but when browsing the web i get painfully slow speeds. When i reset the router and go into the settings and restore my network settings my connection speeds are fast again for about 10-20 minutes before it is painfully slow again. This is terribly frustrating. can anyone please help me, i would appreciate it! thanks, mike

There are many causes for poor wireless connections, and many solutions:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. In rare cases, Bluetooth devices can interfere. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Also, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. If your current network is not listed, enter its info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".
If the above does not fix your problem, download and install the latest driver for your wireless card.
Some users have reported improved wireless performance by switching from WEP to WPA encryption.
If you still have trouble, download and install the latest firmware for your router. After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Hope this helps.

Slow Wireless Connection (WRT54G2)

Hi, my WRT54G2 router has been working great since I got it a year ago. But recently I'm experiencing really slow wireless speed. My normal speed is around 15 Mbps but now it has dropped to about 0.85 - 1.0 Mbps. At first I thought someone might be using my connection without my knowledge so I changed the password but it was still slow. I then changed my wireless channel (I heard that if too many people are on the same channel it can cause interference) and it worked. However, a little bit later (sometimes a few hours and sometimes a few days) my connection would become slow again. I have also tried upgrading my firmware but that didn't help much either. Does anyone know what can cause a problem like this? Any insights are greatly appreciated. Thanks.

Do the following steps: # Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.# Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page)# Then go to the Wireless tab, keep network mode as mixed, make the Channel Width to 20 MHz only and Channel to 6, 9, 11.. #Adjust the following advanced wireless settings:~~ Lower the beacon interval from 100 to 75~~ Lower the fragmentation threshold from 2346 to 2306~~ Lower the RTS threshold from 2347 to 2304 Then check the wireless status..

Slow wireless connection on imac

Hello,
I'm dealing with a wireless connectivity issue with my brand new imac 27". My imac can find my wireless network but the download speed is very slow (1 Mbps instead of 11 Mbps). I'm working with a Dlink DIR-615 router which is installed in my garage, but my Imac is on the second floor. Putting the imac in the living room showed that the internet speed was fine. But upstairs it was not. However, a Windows laptop that I've put next to my Imac, showed better internet performance (5 Mbps). I understand that maybe there is a problem with receiving a good wifi signal upstairs but then again, why is the internet speed on my pc faster when they are both on the same place ? Is there a good tool for a mac to see the wifi signal strength ?
Thanks

Oh yes, you can torn Wifi/Airport off if you like.
Macs look for an Internet connection ftom the top of the Interface list.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Macbook and slow wireless connection

I have trouble reaching high speed when connecting with AirPort to my BT Voyager 2110 router. Connecting with a cable works great.
It seems to be a problem many people have that their wireless connection between the Mac and a router gives only a fraction of the transfer speed compared to when when using a PC and connecting wireless to the very same router. Is Mac more sensitive and have compatibility problems?

I solved the problem I described above. I changed the channel on the router to 11. Tech support told me that Macbook prefers 11, then 2 and then 6. I tried number 2 yesterday and it was still bad. However, channel 11 solved my problems. Now the wireless is fast as with cable.

WRV54G Slow Wireless Connection Speeds

Similar Messages

Maybe you are looking for