WRVS4400N Bandwidth Mgmt Settings for VOIP Use

I need to know the settings for the bandwidth management on SIP calls and setting this as a priority. I believe that the SIP ports are 5060-5061 but want to ensure prior to enabling them. Please help.

Hi AMH-EQ and
welcome to the Cisco Home Community!
The WRVS4400N is
now being handled by the Cisco Small Business Support Community.
For
discussions about this product, please go here.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

How do I restore the settings for apps using Time Machine?

I believe there are problems with items within the Library Folder inside the System Folder. For example, there are two "Frameworks" Folders, but one has "(from old Mac)" after its name. I dare not try to remove or even move either.
Back in the day of OS 9, you could modify something, then search for it by "Last Modified" Date, and find where Apple has hidden itscontents. It's not so easy in OS X. I've had some success using Pondini's Time Machine FAQ's, though. Here is how I got to this problem:
Our family MacBook died. After getting a repair estimate of $500 to $700 "if it's the Logic Board," we decided to replace it. We purchased a MacBook Pro running Lion. (Later, we brought it to an Apple Store and were quoted $435 in house or $280, but they would have to send it out. Incredible repair: Logic Board, Top & Bottom Case, Super Drive, Battery, all for $280. No wonder they're #1). I pulled the Hard Dive out, erased it, and installed an older operating system, but during the repair they installed 10.6.
Restored the MBP from the TM backup of the MacBook. OK
The Macbook is repaired and the store showed me how to restore the data from the TM backup.
Restart and the passwords do not work due to restoring a 10.6 machine from a 10.7 backup.
Tech support guides me through resetting an admin password using the password utility on the install DVD.
changed the other passwords inside of Accounts in System Preferences. Then changed the password or the other Admin.
Restart, get a circle with a line through it.
Tech support guides me through fixing this.
Restart, half my Apps do not work.
Tech support says to re-install 10.6.
I did but I thought it would erase and install but it just re-installed 10.6.
Most Apps work, except iPhoto. Mail is OK sending but only receives on one of 3 accounts.
Is there a fix for iPhoto & Mail? If not, I would plan to erase and use the finder to drag the user folders from TM to the MacBook. Can I just drag the Apps too? How about all of the settings for those Apps?

If you don't keep a backup, you can't restore your machine to any state except the state in which you received it, brand new, with none of your own stuff on it. That makes a pretty convincing argument for backing up, doesn't it?

How do I access my raw settings for further use?

I opened a jpg in CR, made some changes, opened the image, then saved (from within PS) and closed it.
Later I needed to create a duplicate of this image and apply the same CR settings I'd used, but I can't find them. When I open the original jpg, all of the CR settings are set to zero.
Is there any way I can access the CR settings I entered? I want to see what they are, not delete them, not get back to the pre-CR-edit stage.
If this is not possible, what could I have done otherwise to retain access to my CR settings? Should I have saved the image from within CR? If so, how would the CR settings be availalbe for tweaking or copying?
Is there an automatic xmp file that would have this info, and if yes, where would i find it?
Finally, how do I save CR settings in the future for subsequent access?
Many thanks!

The xmp data is written into the original jpeg file, not a sidecar file.
Here's the drill (I'm doing it as I write this msg):
1. Select a jpeg in Bridge.
2. Right click on the image and select Open in Camera Raw...
3. Perform an edit (I did a drastic exposure reduction to make the edits obvious).
4. Click on Open Image, comes up in Photoshop with edits.
5. Shutdown PS and Bridge.
6. Re-open Bridge, select and open same image. Opens in Camera Raw automatically, shows edits, and new CR settings.
As I stated in my earlier post, the only way to "de-Camera Raw" the jpeg image is to clear settings from within Bridge. Again, the jpeg is being re-written with the edits within the file as exif data. And no, there is no message that such a re-write is occurring.
Richard Southworth

Best settings for what used to be HDV, became M2V?

I have some concert footage I shot in HDV60i (on a Canon HV40). I only exported it to DVD and not to an HDV file, so all I have now is an M2V file and an audio file (AAC). Now I need to upload it to youtube, but I have to do some editing in FCP6 first. What is the best sequence settings for me to use in FCP? My second question would be how should I export it for best viewing on youtube (since it's no longer a true HDV file), but that question may be better served for the Compressor forum...any info would be appreciated though!

hi,
well a lot depends on the footage you might be using. Use the setting that matches that. Or if its graphics based use the biggest baddest HD setting you can. Of course if the finished thing is getting burnt to a DVD to be shown its all going to be compressed then and lose quality at that stage.
hth
adam

Settings for optimum use for MBP / Dell 27"

I recently purchased a Dell 27" monitor (which is lush to use for my MBP main display and xbox360 etc.
The MBP display is 1680x1050 but the dell display is 1920x1200 meaning i have to down-rate my display otherwise i have a big blue band around two side of the dell display.
Therefore im not using the display at its optimum settings.
Can anyone over any advice or should i look at purchasing a new laptop capable of displaying the 1920x1200?

Hi Phil: With the external monitor connected, go to System Preferences > Displays >Arrangement Tab. You will no have 2 separate windows for monitor settings. On the one with the "Arrangement" tab uncheck the Mirror Displays box. You will be able to set each monitor to their native resolution. To utilize the external monitor, just drag any open program/application to the external.
Hope this helps
Stedman

Recommended Quicktime settings for web-use

I am preparing a standard definition video ( 640 x 480 )
about 7 minutes long to be used on a website.
Am I alright with H. 264 export as a Quicktime .mov file,
or are there other settings / means of compression that
would be more favorable.
It is an older version of Final Cut - 5.1.4, and I am not seeing
anything for Flash, etc.
Thanks for any help / tips,
Sterne

Since you're dropping down the queue...
http://discussions.apple.com/search.jspa?threadID=&q=%22flv%22&objID=f939&dateRa nge=all&userID=&numResults=15&rankBy=10001
Several threads discuss creating h.264, then renaming the file extension to .flv Seems to work for end users who have Flash v.9 or 10.
Never tried it myself, but check the link for additional info.
K

Memory settings for Windows using newest bits

Hi All,
I the install guide for this newest set of bits, I suggested memory settings of 1.5GB for the Xmx value. This doesn't work for 32bit Windows.
On Windows, if you bump up the -Xmx, then you cannot use the PermSize parameter.
The heap size is calculated as -Xmx + PermMaxSize. If these two add more than 1408MB then WLS will not start.
Here is the recommendation for Windows 32bit:
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m
and
Xmx 1024
and
Managed server configuration
If you are using 32bit Windows, please share your experiences.
Heidi.

So, you do not recommend a single instance install on Windows XP? On our local XP machines we had been running single instance because it seemed simpler and it was recommended in the install instructions. On our shared Windows server the managed server configuration was used.
I have been able to run the latest release of the WLS and BPM Workspace on my local XP machine using these settings configured in my setSOADomainEnv.cmd file. It is very SLOW....30 second response time, but it does run. These same settings are not working for everyone else on my team....they are still playing around to find the right answer for their local XP machines.
set DEFAULT_MEM_ARGS=-Xms640m -Xmx768m
set PORT_MEM_ARGS=-Xms768m -Xmx1536m
set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=128m -XX:MaxPermSize=512m
set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=256m -XX:MaxPermSize=512m
I have noticed, however, that over time (maybe an hour or so) the admin server starts sending out of memory warnings. So, I have to stop WLS and restart it in order to keep working with reasonable response tiems. Often these out of memory warnings start when it is running but idle.

Ever since upgrade to iTunes 11 i get an error message states registry settings for drivers used to import cds are missing

Error message suggests reinstalling itunes - done. Nothing. (So thats the official Apple suggestion beig useless). Tried a number of fixes listed here after search revealed others had this problem. reinstalled itunes, removed ALL 3rd party burning software (even those that were present when itunes was working), amended registry settngs as detailed in Apple Support pages - this didnt work so returned them to original settings. Downloaded new updated Gear drivers etc still nothing. Does anyone have any other possible solutions? Am running an Acer laptop with Windows 7 and now iTunes 11.1.1.11.
Diagnostics run from iTunes says CD drive is working and can read the tracks etc but simply can not import anything. If it runs through one track it takes about 5-10 minutes per 4 minue track, then when you try and play it back it has only saved about 4 seconds worth of crackle. Also can not play the CDs through WMP either or VLC or anything else for that matter.
At wits end now, only option seems to bring forawrd the purchase of replacement laptop but dont want to have same issue in future.
Need iTunes as have iPods, 2 x iPhones, iPad and Apple TV in family so dont want to jump ship...

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Settings for monitor using thunderbolt to vga cable

Have an HDTV Bought a cable for thunderbolt port on macbook pro to vga. Hooked it into vga port on tv, and got backgound screen saver, but no icons or menus on tv. What settings do I need to change?

None. Just drag windows off one edge or another of your built-in screen to move them onto the TV set.
The TV is in Extended Desktop mode, meaning it serves as an extension of your built-in screen's workspace. In that mode, the TV and the built-in display can each operate at its full native resolution and you can have different stuff on each of them. In the alternative mode, Mirrored, the TV will be limited to the maximum resolution of the built-in display, which is lower than the TV's unless you have a 17" MBP, and both screens will always display exactly the same stuff. Because the TV will have to operate at less than its full resolution in Mirrored mode, it will always be blurry in that mode.

Best power plan settings for Helix (use hibernation?)

Hi, I noticed that the default power plans on my Helix all have hibernate set to off. I read somewhere (Pogue, maybe?) that Windows 8 is smart about power management and if you put your PC to sleep after a while it will go into a "deeper" sleep (which I'm assuming is hibernation). If I just put my Helix to sleep without plugging it in when I go to bed, when I get up in the morning it's lost about 10% of its combined battery (tablet + keyboard); that seems a lot to me for something that's "asleep". Do I need to turn on hibernation and set up a plan to use it after a certain amount of time sleeping? I've heard that might not be a good idea with SSD drives.
Thanks for any advice!
JT
Lenovo ThinkPad Helix 36984SU

Do you place your backups on external disks? Are your external disks formatted HFS+?
Can HFS+ Disk image be Drag dropped into a HFS+ formatted external disk in order to copy them? or is the process blocked like what happens to large Disk images in FAT 32?
I'm trying to lock on to the right format to apply to everything. My steps will be:
Make the image: So far a sparse image in HFS+ format, 400 GB, No partition map.
Drag sensitive work to Disk image. Once transfer in complete delete originals.
Format an external disk into the journaled HFS+ format. Drag drop Secure disk image to back it up.
Do you see any problems with this process? Anything i'm missing?

TS3367 Face time settings for Internet use only.

What setting do I use to ensure that I am only using the Internet to face time and not using my mobile?

Settings>FaceTime.
Turn "Use Cellular Data" off.

Manual settings for underwater use

I have a S110 camera which I would like to use underwater in M (manual mode) but have trouble with "overexposure". I set the file capture to RAW, shutter speed to 200, aperature to 8.0, and ISO to 80 and still have all the pics overexposed.
What am I missing??
Richard

We need more info to help. Are you snorkeling or diving? Is the background open water or the sandy bottom? Flash or natural light? There isn't one setting that fits all of the variables. You use a combination of aperture & shutter sped to get the correct exposure & work with the ISO to keep you within a workable range of those settings. It's a bit easier with a DSLR thanks to smaller apertures but you can still find workable settings on a P & S.
"A skill is developed through constant practice with a passion to improve, not bought."

How to implement VOIP using sip in j2me

hi, i have create sip session. now i want to use it for VOIP using j2m. how can i do this. i mean which APIs are helpful in developing it. i hav following questions
1. how can i get sound from mic to use in app and in which format
2. is it ok to buffer sound n then transfer it over network?
3. voice buffer direclty goes to other client mobile or processed at sipserver before reaching the client mobile.
4. audio streaming is possible or not for S60 3rd edition.
if u have some docs and guidelines other then these, plz tell me.

Why don't you give us the money your Boss pays you.. then we'll see what can be done ;)
Seriously, it might be smart to start your own research first. Check out what VoiP and SIP are all about, and the check how it fits into J2me.

Best settings for archiving?

Hello everyone. I'm new to the Final Cut Studio suite of programs. I work for a church and we record each service as SD DV. The result is usually about 16GB per week. I was using ffmpegX and was able to make a MPEG-4 MOV file where the video was 8 Mb/s and the AAC audio 448 Kb/s and I got it down to 2.63 GB. We'd like to be able to grab clips for future FCP projects. I was curious to see if anyone knows of better settings for this using Compressor. Rendering the compressed MOV clips back in Final Cut takes a long time (I obviously only do a portion, not the entire 1+ hour file) and I was hoping for a better way to do this. I've also been checking out the Pro Res 422 in Final Cut 6 (we're on FC5); would Pro Res be good for archiving SD DV files to smaller sizes, or is it only good for HD?
Thanks in advance!

Ok, makes sense about the Pro Res 422. At least we would benefit from the ability to edit it several formats without rendering until the end. I thought I saw that as one of the features online. Correct me if I'm wrong.
We record to a FireStore, which is a FireWire hard drive that creates .dv files directly from the camera. So, we're not using tapes to begin with. We could, but one tape a week could get expensive. We'd like to store them digitally, but processing time upon edit is not a big deal because we don't edit them very often.
So, knowing that h.264 and mpeg-4 is going to chew up resources on the encode and decode, what settings would give us the best quality for a reasonable file size. We're at 16GB per service uncompressed, so anything 4GB or lower would be ideal.
Thanks!

E72 SIP to be used for VoIP

Any one can advise me for the needfull to let the E72 able to use SIP service to place voip calls?
Regards
Bilal

Hi BilalGhayad
You need SIP VoIP 3.x Settings (164 kB) from here:http://www.forum.nokia.com/info/sw.nokia.com/id/d476061e-90ca-42e9-b3ea-1a852f3808ec/SIP_VoIP_Settin...
User Guide available here:http://sw.nokia.com/id/15c504c6-e984-4fd6-be4d-890d24be95c7/SIP_VoIP_Release_3_x_Settings_Applicatio...
Settings application found in Control Panel > Net Settings > Advanced VOIP Settings
Happy to have helped forum in a small way with a Support Ratio = 37.0

WRVS4400N Bandwidth Mgmt Settings for VOIP Use

Similar Messages

Maybe you are looking for