WRVS4400N causes my DNS server to time out

Folks,
I have a Fedora 11 box running behind a WRVS4400N router. From the box, standard network functionality such as ping, telnet, browsing, etc. works just fine. The problem is using the DNS server (Bind9) on the box. When this DNS server makes a request to external root servers, the connection just times out.
As you may know, when a DNS request is made by Bind, the destination port is 53 and the source port could be anything from 1024 to 60000.
I used tcpdump to trace the network packets. A UDP packet to port 53 of external root server is sent but the reply never comes back.
I replace the Linksys router with another DLink router, things start to work fine. When I trace the network packets, I see that the reply is coming through. This leads me to believe that there is something wrong with my Linksys router.
I am running the latest firmware on the router. I also did a factory reset to make sure that it is in a clean state.
Has anyone else seen such a problem? How did you fix it?
Thank you in advance for your help.
Regards,
Peter

did you try port forwarding? you may forward the port that will work for your DNS servers.

Similar Messages

Whenever i try to update my iphone through the itunes it gives the error of server connetion time out

whenever i tried to update my iphone through itunes it gives the server connection time out error and i am unable to update my software throught the iphone

Hello ujl,
The articles linked below provides steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD

Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.

The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted.

I have Problem uploading photos to craigslist. It says it has a problem communicating with the server and times out. It works in explorer but not Firefox and I just recently downloaded the new version of firefox. Can you be of any help?

Photos will not upload and the server times out.

Well, two thoughts.
The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
The battery has deep discharged and is now dead. It will never recharge and should be replaced.
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
The flat fee for a battery exchange is, I believe, $99.00 USD.

Server Proxy --time out.

Hi,
How can we process large amount of data in server proxy. Is there any parameter that can make server proxy run in background mode. currently the server proxy is timing out in ECC.
Thanks,
Viswas.

Viswas,
Can you pls. elaborate your rek. I mean what are you trying to do in proxy ( Code inside proxy)? You are trying to post data? or something else?
I think its better you debug your proxy code and check which statement is taking too much of time...
Follow blog below for debugging..
XI: Debug your inbound ABAP Proxy implementation
Let us know the statment which is taking too much of time.
Nilesh

Ftp time out

when transfering a file to an ftp site, it appears final cut server first touches a new file on a remote ftp site, then encodes the source file, then starts uploading. this causes the connection to the ftp server to time out if the encoding takes a long time.
unfortunately, i cannot change the timeout setting on the remote ftp server (not my server). anyone know how to prevent this? anyone know what fcs is using to upload via ftp? is there maybe a config file in the os where i can set a "keep alive" value?
d.

No, but I can give you a workaround:
Instead of having a copy response encode to the FTP device, create a local watcher that you can set as the destination for your transcoding copy response. Be sure to wildcard exclude "fcsvr*" so that the watcher does not grab the file before it has been given its final name. On the watcher, apply a copy response with no transcode option followed by a delete response.
If you are triggering a subscription on an existing asset to get this whole ball rolling, I also recommend adding a script response to the subscription stack after the transcode copy response. Make it do this:
Command path = mv
Parameters = "/<path to local watcher>/\[Title].mov" "/<path to local watcher>/\[Asset ID].mov"
Include the quotes when you set the parameters, they are important. This response will rename your transcoded movie with a unique integer instead of the potentially FTP-unfriendly asset title value that is the default for copy responses. Of course, if your transcode makes something other than a .mov, adjust the parameters above for the file type suffix your transcode produces.

Secure site (OWA) times out after 10 min.

I'm finding that Safari times out the session to OWA (Outlook Web Access) after about 10 minutes. The server side time out is set to 22 min.
Is this something that can be fixed? I see no 'idle time disconnect' prefs in Safari.
The PC's time out properly after 22 min.

I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl

DNS server stops responding after waking from sleep

In order to save energy, I put my iMac server (10.10.3 + server 4.0) to sleep at night, when I won't be needing it to answer DNS queries. However, for a few days (and coincidentally after upgrading to 10.10.3) when the server wakes up at the preset time, the DNS queries all time out (from my other terminals, like iPhone). I have to SSH into the server, serveradmin stop dns and then serveradmin start dns.
Any idea?

In general, servers are intended to be always-on and always available, and servers are not generally configured to sleep.
If you'd like to log a bug report with Apple around to the failure to properly restart, use the Contact Us link at the bottom of the page here, or use the Provide Server Feedback from within the Server.app menus.
Pending resolution, If you need to have the server go offline for some reason, shut down and then reboot when necessary.

[SOLVED] Pacstrap connection time-out

SOLUTION: Don't be a newbie like me and not know what DNS stands for. What I did to solve my problem was simply modify my /etc/resolv.conf to point to 8.8.8.8 instead of my default gateway.
G'day everyone, I apologize in advance for my lack of experience.
I understand this distribution is not for beginners, but I personally love steep learning curves as it provides the most enjoyable and interesting experience for me.
It's also the fastest way to learn.
Albeit, I have yet to even successfully install Arch!
I'm a little put off, but I've already deleted my Windows partition so now I am committed.
Anyways, so I've been following the absolutely wonderful Beginner's guide. But I seem to have made some huge mistake, or something is terribly wrong.
I'm only upto the part where it suggest typing "pacstrap /mnt base base-devel".
However when I put that command in, I am eventually returned with:
1 root@archiso ~ # pacstrap mnt base base-devel
==> Creating install root at /mnt
==> Installing packages to /mnt
warning: database file for 'core' does not exist
: : Synchronizing package databases...
error: failed retrieving file 'core.db' from mirror.aarnet.edu.au : Connection time-out
error: failed retrieving file 'core.db' from ftp.iinet.net.au : Connection time out
Etc etc. I tried using the original Mirrorlist and that gave me back 30 odd different server connection time outs. So I switched to just the Australian servers. It managed to download the 'extra' and 'community' packages when I swapped (they weren't downloading earlier either).
I've done a bit of searching (probably not enough) but I'm about to head off to sleep as it's almost midnight and I have work tomorrow. So I figured there's no harm in posting as that gives people many hours to respond. What I did find in my searching was that things like this occur when iPv6 is enabled. Unfortunately I don't have the luxury of restarting (or so I believe), because as you may have seen I'm actually trying to still install! So I'm a little stuck? Any help at all is appreciated, even if it's like
ArchLinuxPro wrote:Get out of here, you are too noob, go look at *insert easy way to learn Arch Linux here*.
Thanks,
Aaron.
Last edited by Ikbosh (2012-09-23 16:41:37)

ajaykumar wrote:
Hi lkbosh,
Ikbosh wrote:Although, I started Arch up into a VM environment and had no issues installing base and base-devel.
I think you can use those installed packages in order to install into your home computer. Please go through the following link
Custom Local Repository - Howto
I think it might help you in easy-install
With regards,
Ajay Kumar G
Unfortunately there's no way for me to connect to this VM remotely from home. Our work network is locked up pretty tight.
DSpider wrote:Or try the link above that: https://wiki.archlinux.org/index.php/Pa … _USB_stick
I'd do that, but I'm too far away from getting a running Arch linux inside my VM (Ended up having to do work most of the day ), let alone enough time to configure Guest Additions
plustwo wrote:
can you ping google.com?
you might also check your /etc/resolve.conf.
and are going through a proxy perhaps?
tnx
Prior to deleting
inet 192.168.2.232/24 brd 192.168.2.255 scope global eth0
I was able to ping google. My "/etc/resolve.conf" pointed to my router and there are definitely no proxies that I'm going through.
Off topic: Also, I just found out they are allowing pre-loading of Borderlands 2 D:
I think I might have to just grab another SSD from here at work and use that for Linux.
Because I deleted Windows 8 off my current SSD because it was being an arse and not letting CFDISK or Parted or GParted (Ubuntu Live) from seeing the partitions (I gave Arch ~10GB to mess with on the SSD and ~100GB on my HDD).
Last edited by Ikbosh (2012-09-18 08:57:12)

Crystal report Viewer Session times out for more data in Portal

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

Delayed shutDown of server, set time?

Hello,
I have a macmini server and when I shut down the server it times out because I run VMware Fusin with 3 Linux VMs
and it takes about 1,5minutes to suspend.
Is there a way to specify the system to wait at least 120sec before shutting down?
Sincerely,
DB

I'm not sure if the -t switch works in OS X, but it would be like this from the command line:
sudo shutdown -s -t 120
Or at a specific time:
sudo shutdown -s -h 21:15:00
The -f switch forces running applications to shutdown, but again I'm not sure if that switch works in OS X:
sudo shutdown -s -f -t 120

Edge Animate causing Server Time Out Error and other problems

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Site is not verifying due to Server Time Out error. Also menu which was created with Adobe Edge Animate does not show up as navigation in a site map or when bots read the site. Site won't verify or index in google.
Suggestions on how to fix this would be helpful and appreciated.
This is the website address. please type in Without any spaces:
louis place cafe DOT com DOT au

Hello I'm having a no dns server problem on my time capsule

Hello I'm having this same problem:
Sammy Stefanki
Apr 11, 2012 2:20 PM
Hi everyone,
I just bought a new AirPort Express and Comcast is my ISP. I ditched my old Belkin wireless router, connected the Comcast modem directly to my AirPort Express, and it appears to be working great. I can access the internet wirelessly and also play music using AirPlay through my stereo speakers.
However, when I open the AirPort Utility, the utility tells me that I have two problems with my AirPort Express:
Apparently I have no internet connection (the utility tells me that "Your AirPort base station does not have a valid IP address."), even though I can access the internet just fine.
I don't appear to have any DNS server addresses (the utility tells me that "This AirPort base station doesn't have any DNS server addresses and might have trouble connecting to the internet.")
Does anyone know if these are serious problems that I need to address, or can they be ignored? I don't want to start tinkering with the AirPort Express's settings until I am better informed, because right now everything is working as far as my access to the internet is concerned.
and I tried to :
by Tesserax on Apr 11, 2012 2:25 PM
Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.
BUT NOTHING IT STILL SHOWS NO INTERNET CONNECTON on my capsule and NO DNS SERVER ...
I have tried to HARD RESET it resets ( with a Network Name (SSID) of Apple Network NNNNNN) and it connects to internet, it also says setuo complete in airport utility but once I go back into Airport utily cause Time capsule is still flashing amber it says NO INTERNET CONNECTION and NO DNS SERVER ...
anyone has any suggestions PLEASE and Thank you

Check the Ethernet connection to the AirPort Express. Make sure that the Ethernet connection from the Comcast modem is connected to the WAN port on the back of the AirPort Express. The WAN port is the one with the circle of dots shown over the port.
It sounds like you are connected to the Ethernet LAN port.

Nslookup: DNS request timed out. time out was 2 seconds. (When the primary DNS is down)

Hi All,
I have set up 2 Windows Server 2012 domain controllers (DCA & DCB). DCA points at DCB as the primary DNS, and itself as the alternate DNS. DCB points at DCA as the primary DNS, and itself as the alternate DNS.
When both DCs are running and if I do an nslookup on DCA: The result is as follows:
Default Server: dcb.testdomain.com
Address: 30.30.30.2
nslookup on DCB:
Default Server: dca.testdomain.com
Address: 30.30.30.1
Client PC (Windows 7 Pro):
1st DNS : 30.30.30.31
Alternate DNS: 30.30.30.32
nslookup on the client PC
Default Server: dca.testdomain.com
Address: 30.30.30.1
Up to here everything is fine. Now if I turn off DCA, and do an nslookup, the result is as follows:
DCB nslookup:
DNS request timed out.
time out was 2 seconds.
Default Server Unknown
Address: 30.30.30.31
Client PC nslookup:
DNS request timed out.
time out was 2 seconds.
Default Server Unknown
Address: 30.30.30.31
I waited for more than 15 minutes an tried again, it didn't help.
I have been reading a few similar posts on this matter, but couldn't find the answer.
I would expected it to display the DCB when I do an nslookup.
Question 1: Shouldn't that display DCB rather than displaying a time out message when I do nslookup?
Question 2: The fact that it displays a time out message, does it mean that more configuration needs to be done? If so please kindly advice what needs to be done.
I did an ipconfig /displaydns command. I realized that the order of DNS have changed on both DCB and the Client PC:
Now, they both display DCB on the top of the list, whereas they were displaying DCA on the top of the list prior to the shut down.
Question 3: Does it mean that the Client PC now knows that the 1st DNS is down and so it's using the 2nd DNS?
If so, why does the nslookup display the time out message?
Question 4: Is it possible to configure either of DNS Server or the DNS client, so it displays the 2nd DNS when the first DNS is not accessible and when I do nslookup?
Thank you for.

Hi Ton_2013,
Based on my understanding, the issue we are experiencing is that: when the primary DNS server is down, the result of the tool Nslookup is to diaplay the time out message at first. Right?
Based on my knowledge, timed out message is means that the server did not respond to a request after a certain amount of time and a certain number of retries. Because the primary DNS server is down, it can't respond to this request and time is out. When
the primary DNS server can't respond, the secondary DNS server works to ensure effective work. And the order is changed as you said.
As to the reason why the result is still the same even when the order has changed, we can try to use Network Monitor to capture network traffic and view and analyze it to find the cause. And the cause may be the cache. For your information, please refer
to the following link to download the tool Network Monitor:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Regards,
Lany Zhang

Server.app can't load alerts and throws out error getAndLockContext: flock(servermgr_info) FATAL time out

Hi everybody,
I did a working migration of my Lion Server stating all services has been migrated successfully!
All my used services are running fine (dns, mail, iCal, dhcp, web, VPN, adressbook, profilemanger, sharing, opendirectory) but using server.app causes an error while server.app seems to load the alerts section without success throwing out some message windows and those messages in my log console
servermgrd[36677] [36677] error in getAndLockContext: flock(servermgr_info) FATAL time out
servermgrd[24195] [24195] process will force-quit to avoid deadlock
com.apple.launchd[1] (com.apple.servermgrd[24195]) Exited with exit code: 1
Servermgrd process goes up to 100% and you have to quit server.app to calm it down.
Anyone got a similar error or knows any workaround to abandon this error?
Thanks and regards
Eldrik

RB jp's solution (move the /var/log/eventmonitor folder) solved my problem completely.
Not only did Server.app suddenly become response again, the spinner trying to access alerts stopped spinning.
Best of all, the servermgrd daemon stopped crashing every two minutes! There were messages in system.log that read:
error in getAndLockContext: flock(servermgr_info) FATAL time out
server servermgrd[38070]: [38070] process will force-quit to avoid deadlock
Those are now gone. Server is happy again.

WRVS4400N causes my DNS server to time out

Similar Messages

Maybe you are looking for