WRVS4400N - Connecting IPSEC with a MAC

I know this question has been asked before, but I am still struggling with it. I did find one solution here involving IPSecuritas that looked promising. However, it appears that the instructions were given for a slightly lower firmware version. I am at the 1.1.03 version and my screen is slightly different. I am not able to get the client to speak to the router from the internet. Has anyone been successful in doing this at the current firmware version? Any other solutions aside from Hamachi, which doesn't play well with Leopard anyway. Thanks, Todd

Hi.
Not sure if this helps, but I did exactly as JudaZ suggested, before I cam e across your thread and iw worked for me.  I have Link on Snow Leopard and installed it the day I got my N9.  Didn't plug the phone in until the next day, but it didn't detect.  Removed and reinstalled Link and all was fine.
Sorry this doesn't give a reason, but it was a solution that worked for me 

Similar Messages

  • Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Why can´t  I find my 5d Mark ii in the finder when I connect it with my mac?

    Because it is not a mass storage device that would appear in the Finder. It uses the Picture Transfer Protocol (PTP) to interface with a computer. It can be accessed using an application that uses PTP, such as Image Capture, iPhoto, Aperture, or Canon's software. These applications also support more camera-specific features than the Finder would, such as tethered shooting and possibly camera clock synchronization.

  • HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

    I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

    Troubleshoot the network as that is likely what is causing the issue.
    Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

  • TS2771 my ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, became a dark screen, what can I do? I love this ipod very much as it's a present from my

    My ipod sank in water by accident for 1 hour, after lay drying for 1 month, I connect it with my Mac, it show a dark apple and began to charge, after few hrs, it showed fully charge, but after I pressed, it became a dark screen, but it shows a dark apple everytime I connect the Mac, what can I do? I will try my best to save it, I love this ipod very much as it's a present from my dear.

    After drying for a month and it's still not working, it's almost certainly suffered hardware damage and will need to be replaced. You can learn what Apple will charge to replace it here:
    http://www.apple.com/support/ipod/service/faq/
    BTW, you posted originally in the iPod touch forum. It's best if you post in the forum specifically for your product; you'll get the most applicable responses that way.
    Regards.

  • Bluetooth 3.0 connection problem with keyboard - Mac OSX 10.6.8

    I have a white Macbook running OSX 10.6.8, which I cannot get to pair with bluetooth 3.0 keyboard. Recognises the device but cannot pair. I have deleted bluetooth plist, done a full reboot, reset PRAM, and checked that all software up to date. Have the same problem in pairing the KB with my daughter’s MBP (running Lion).  The keyboard pairs with windows laptop,  iphone, and ipad OK. Any suggestions?

    Dear KatheeG,
    Please uninstall HP software and install Full HP software for Mac OSC 10.6:
    http://ftp.hp.com/pub/softlib/software10/COL30072/​oj-74785-1/HP_Installer_Photosmart_Full_Group01_10​...
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Help!  Bought an IPod from a PC user, now I can't connect it to my Mac!

    I bnought an IPod from a friend who was using it with a PC. I erased all of it's memory and then restored it using the IPod updater software I got from apple.com. Now, I can't connect it to my Mac, and the IPod screen goes from the "apple" display, to the unsmiling Mac man on a file folder. None of the suggestions on the Apple support page seem to work, any suggestions?

    Put it in Disk Mode, connect it with your Mac again, open the disk utility and you will able to see your iPod icon there, hightlight it, and go to tab "Erase" and do a erase (format in Mac OS externded (Journaled)). Once it has been completed, do a eject and reset your iPod. Open the iPod Updater and plug your iPod back with your Mac, and click Restore.

  • Connecting problems with iphone after a closed connection with a Mac

    Hi!
    I have set up 4 ssl vpn  with different shared keys. The connection with each Mac via Securitas is working fine. Additinaly I have set up a ssl vpn for an iPhone iOS4. If the SA 540 is rebooted I can connect to the SA with the iphone without any problems, one tine, two times...
    But after I had closed a vpn-Mac-connection it is not possible to connect with the iphone again: the shared key is not correct. In this case the iphone tried to connect with its own shared key - a different one to the Mac connection.
    So I set all shared keys to the same. After reboot of the SA the connection of the iphone works well. After a running or closed Mac connection the iphone could not connect to the SA: Error: communication with VPN-Server failed.
    So it is not possible to connect with an iphone and an ssl client at the same time. The iphone can only make a connection after a long time again.
    Has anybody a solution for that issue?
    The latest firmware is installed.
    Thanks a lot!
    Jens

    This is a normal behavior when NAT-T is not enabled. Without NAT-T, the firewall cannot PAT ESP packets because there is no port (UDP or TCP) in the packet. Hence, every packet leaving the WAN interface has the same source address and no source port by which the return traffic can be identified and translated back to the inside address. With NAT-T enabled, the packet is encapsulated in UDP before being translated by NAT; therefore, each IPSec host on the inside of the firewall gets a unique PAT'ed source UDP port after the PAT is peformed and before the packet is sent out of the WAN interface; hence, when the return traffic arrives in the WAN interface, the firewall knows which PAT rule to use to send the return traffic back to the host on the inside of the firewall that originated the IPSec VPN connection.
    Therefore, with NAT-T disabled, only one host behind a PAT firewall/router can establish an IPSec VPN tunnel to a host on the Internet at one time.
    Besides the requirement of having NAT-T enabled for multiple hosts to be able to establish an IPSec VPN tunnel from behind a PAT firewall/router, you should also make sure that there's a firewall rule applied inbound on the WAN interface that allows UDP 4500; otherwise, NAT-T will not work. NAT-T uses UDP 4500 for IKE negotiations. Without NAT-T, IKE uses UDP 500.

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

    Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
    We need it to be acceptable to all devices.
    Thank you!

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/iphone.html

  • How do I connect to a terminal server with my mac book pro

    How do I connect to a terminal server with my mac book pro

    Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field.  If that does not work then use the IP address to connect.

  • Hello ...  I have a problem with a wifi connection speed on my mac pro ... the problem is that in one room the internet opening for the websites is extremely slow ... but when i move the mac pro somewhat to other location ... the internet speed increase

    hello ....
    my connection problem on my mac pro is :
    that when i try to open a website on safari .... it delays ... and takes more than 30 seconds to open completely ...
    but when i move the mac pro to another location ... its internet opening speeds up ....
    also in one room ... web opening delays .... but on other rooms it is normal
    so what can i do to solve this problem ....
    Note : also when i hold it up and move in the same room ... the speed changes and somewhere speed up ... and in another location speed down ..
    thanks for you all ...
    Waiting for your support ... as quick as possible ...

    WiFi signals get stronger the closer the machine is to the router and the less interference/blocking of the signal like via walls with metal in them or of thick concrete.
    Since the signal emanates outwards in a sphere, your supposed to place the wireless router in a central location in the building so it covers all areas.
    The power of the router also has a affect, if your router is old or something not that powerful like a Airport Express, it doesn't have the ability to filter out other signals or enough punch to get through walls etc. or cover a large area as effectively.
    If you buy/have a powerful router of newer make and have issues where there is metal in the walls or thick concrete, then you can buy something like OpenMesh and by using Ethernet cables from the back of the router, extend the WiFi signal into other rooms and areas past the blockage.
    https://www.open-mesh.com/

  • The Airplay icon does not show, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    The Airplay icon does not show on my Mac Pro, regardless that it is clicked on display. How can I do to see the Airplay Icon in order to connect my apple TV with my Mac Pro?

    To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
    About AirPlay Mirroring in OS X

  • How to connect my ipod with my mac

    Hello...
    I'm trying to connect my ipod touch with my mac book pro and for some reason the ipod is not paired, it is conected and the mac is finding the ipod but not pairing it
    The arror i get at my ipod is:
    Make sure "maci" (my mac name) is turned on, in range, and is ready to pair.
    What do I need to do to make it work?
    Tanx

    This is not feature of the ipod touch.  You cannot connect to a computer or another phone or device.
    It is for stereo headsets/speakers and some peer-to-peer apps from the app store.

  • Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud?

    Why do I need to connect my Ipad mini with my Mac Book Pro via iCloud? I don't have iCloud on my MacBook Pro and only intend to use the mini to check e-mail and use Garage Band and Photo Booth for song writing when traveling . . .

    Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
    In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
    When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
    You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
    Thank everybody, especialy Zyriab, ne was the closest.
    High regards to everybody

  • I am having trouble with my Mac Mini's ethernet connection.   Defining a new network interface shows no ethernet adaptor.  Reloading SL from DVD repaired.  But SL update lost ethernet again.  Will Lion Fix?

    I am having trouble with my mac mini ethernet.  It had been working for weeks after an update to SL 10.6.8.
    Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
    But yesterday, after a power up.  my ethernet was not working again. I tried this old trick to repair it, but the interface choices
    listed for '+' a new service did not include Ethernet any more.  And the Utilities->System Profiler->Ethernet Cards shows
    no ethernet available.
    As a last ditch effort i reloaded my original SL from DVD.  (I think it was version 10.6.4 but i could be mistaken on the version).
    The ethernet worked!  But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
    So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
    Now the Ethernet is not working again.  I see the same symptoms as before with the Ethernet seeming not installed.
    Is this a problem seen by others?
    Would going to Lion fix the problem?
    Could AirPort actually be the culprit and not SL?
    If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?

    Have you reset the SMC?
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again.

Maybe you are looking for