Wrvs4400n file transfer connection trouble "Too Much Data"

Hi when connecting trying to do file transfers over IRC in mirc, when some people try to send me files, they get a "Too much data recieved" Error, only happens with this router (i have a wag200g and that works perfect)
this is while trying to establish connection and only seems to effect one port (443) thou i only have 3 ports to test, the other 2 work fine
any ideas?
Message Edited by Nirces on 08-09-2007 10:00 AM

try reducing MTU to 1365 on the router, also try reflashing the firmware...check whether it makes any difference or not.

Similar Messages

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

Suddenly using too much data?

Hi everyone,
I have had my iphone 5 for over a year. For the first couple of months I had problems with using too much data but eventually learned it was my email causing the issues (it was updating automatically). Fast forward this past Christmas. I got an iPad 2, and ONLY use it at home when it's connected to WiFi. To be completely honest, I am not even 100% sure if it supports cellular data at all, although I don't believe it does as there's nothing mentioned of cell data in Settings. Now for the past 2 months, I have been using too much data and having to pay extra on our cell bill and I have no idea what has changed besides updating the iPad and my phone (I just updated my phone a couple days ago) to iOS 7.0.6. The charges aren't enormous or anything, I think it was around $8 extra last month but still, I don't know what has changed. I have already gotten a text from my provider (Telus - Canadian company) today saying that I am now paying for my data usage, because we (my husband and I combined) have used our data alotment for the month. I know the problem is my phone because I used about double the amount of data as he did on our last bill. I tried calling my provider, but I was on hold for ages so I will give it another go tomorrow if I can't get something figured out in the meantime.
So my questions are: 1) Could it be the iPad using data? I do have it set so that it backs up to iCloud when plugged in (I believe, my sister in law set it up for me), and it syncs my photos from iphone to the ipad. As you can probably tell, I am just slightly technologically illiterate here. I also did get a new keyboard case for it last month that uses bluetooth.
2) If it's not the ipad, any ideas of where the data could be going? I use my phone mainly for texts and calls, Facebook, email, some internet browsing, but it is set to WiFi. I mostly use it at home where there is a WiFi connection. Although my young kids do play Angry Birds and watch some videos when we are driving. I don't believe the amount of games they play and videos they watch have changed though, that has been an ongoing thing.
Thanks for any advice, I would like to nip this in the bud before something gets out of control.

Update: I got my bill today, and as suspected I have used way more than half of our shared data plan (which is 1GB - I used 1760Mb). I have had my cellular data either completely turned off, OR turned on but not allow any apps to use it (I noticed that I was having some issues with not being able to send/receive texts if my data was compeltely turned off... Not sure why, but that's another post I guess) since I started this post. I called Telus and she wasn't able to tell me where any of my data was going, she just kept saying "well you've only spend $3.69 in data for last month" and asked me if I was completely closing out apps, which I do every other day or so. She just recommended that I download an app called My Data Manager to set a limit on how much cellular data I am using, however the app doesn't tell me WHERE the data is going which is my concern. So I'm kind of back at square one. I'm not sure if I should allow my kids to play their games and do as I normally do on the phone until the data gets racked up and then I can try to figure out where it's going, or what. My billing cycle started on March 18 and since then I have used 1MB (approx.) of data, but I was in the US for 4 of those days and had the data turned off completely, so again not sure where that 1MB went. One thing I have started doing that is new, is playing downloaded music (music that I have on iTunes, and put onto my phone) in the car. I thought since it is music that I have put onto the phone (not streaming music) it wouldn't be using any data, but on March 19 (the day before we left for the US), I was playing music in the car with my data turned off, and when a song ended and I tried to play another one it said that the cellular data was turned off and I needed to turn it on. I didn't turn it on, but I did put the phone into airplane mode and was able to play my music that way. Could that be using cellular data? If so, then I know where it has been going!

Is there a way to have internet access for my laptop through Verizon? I have a smartphone, but I don't want to rack up too much data.

Is there a way to have internet access for my laptop through Verizon? I have a smartphone, but I don't want to rack up too much data. How would the laptop connect to the 4G? network? Thanks for any info:)

Rcshnoor nailed it, everything will depend on how they manage their data connection once the laptop is connected. It is perfectly feasible that they will have no issues with this new connection. However, there is nothing stopping the user from going above and beyond the data usage cap currently sufficient for the phone by itself. We cannot presume that any estimations on new usage will be accurate either.
Users should always be aware of the reality that revolves around data usage and the devices that consume them. Its no different than installing a 2nd waterline/hose on your house. Sure the hose will be fine if you remember to turn it off when you are done, but no one is going to stop you from letting it run all night if you forget.

My daughter has sent me over 100 photos via 8 messages and can't see them as message crashes every time I try to open, probably too much data but what do I do?

My daughter has sent me photos to my iPad mini, when I go to messages it crashes, probably too much data, what can I do?

My daughter has sent me photos to my iPad mini, when I go to messages it crashes, probably too much data, what can I do?

Applications are using too much data

my iphone 5 fatching too much data on every application like facebook , whats app etc...

Thanks for sharing. I'll share something with you. My Sony TV has a great picture.

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

My messages app won't open, after I sent a large iMessage. I think it just has too much data on it. What can I do other then reset my iPhone?

Hi everyone, I had this problem but none of the solutions above worked. What happened with me, and with others in other forums, is that a particular thread or message was causing the problem. I'd go to open the message and all I'd get was a white screen with the blue bar at the top. So, I went into contacts, pressed 'send message' to a contact whose message wasn't causing the problem, then I pressed back to messages. You then swipe to the left on the thread that's causing the problem, and delete it. Sadly this means you will lose all that person's messages, but you can try opening it from there and deleting it on the thread. Didn't work for me though. Hope that helps! It was the only thing that worked for me after about three days of total frustration and resetting!

HT1695 Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-f

Recently my iphone is consuming too much data, I have installed a data monitoring app and I found that - although I turned off all notifications and push email - push services is using around a 1mega/hour from cellular data (even if I am using wi-fi) !!!

cpupower frequency-info
analyzing CPU 0:
driver: acpi-cpufreq
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 10.0 us.
hardware limits: 800 MHz - 2.30 GHz
available frequency steps: 2.30 GHz, 2.30 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz
available cpufreq governors: conservative, powersave, ondemand, performance
current policy: frequency should be within 800 MHz and 2.30 GHz.
The governor "conservative" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 2.30 GHz:0,02%, 2.30 GHz:0,05%, 1.80 GHz:0,05%, 1.60 GHz:0,03%, 1.40 GHz:0,01%, 1.20 GHz:0,16%, 1000 MHz:0,38%, 800 MHz:99,29% (1017)
boost state support:
Supported: yes
Active: yes
25500 MHz max turbo 4 active cores
25500 MHz max turbo 3 active cores
25500 MHz max turbo 2 active cores
25500 MHz max turbo 1 active cores
Thax

You cannot embed this FLV file because it consumes too much memory. Could sb help with this problem?

You cannot embed this FLV file because it consumes too much memory. Could sb help with this problem?

The error is pretty concise. Do you know how to re-encode the video smaller?

File migration - too much data?

I'm trying to migrate my photos, music and documents from my old desktop (4GB memory) to my new Mac air, either direct or from the Time Machine backup....thing is i can't seem to do it because the system thinks there is hundreds of GB of data (i think all the backups added together?)....any ideas?

The 4GB memory is likely the RAM on your old desktop and has nothing to do with the amount of data stored on its hard drive -- unless you know for sure that is the data on the hard drive, but that would be a very small amount.
Sounds like the old desktop is also a Mac. If you open Finder on it and navigate to Users and then use the Command i key combination that will open a window that will show how much data in the Users folder. You can navigate to a specific user and to folders such as Documents, Pictures, etc and use Command i on each to get an idea of how much data and where it is.

Time machine backs up too much data repeatedly

Since May 2010, my 500GB WD external HD (connected to an AEBS via USB) performed spectacularly; often backing up data several times per day.
Then, all of a sudden a few months ago the TM icon in the finder bar showed that it was backing up 20+GB when I had not made any changes to THAT much data. Seeing how this continued for a while, I reformatted the external HD and everything was back to normal.
A few days later the same thing happened and I reformatted it again. After happening for the third time, I just let TM back up these very large amounts of data as many times as it wanted until the disk got full (about 5 hours). Eventually the TM backups got so large, that they could not be stored on the external HD despite erasing the older back ups. This all happened a few weeks ago.
Now I have already tried to directly connect the drive via USB to my MB to no avail. Additionally, I reformatted a Lacie 500GB to connect via USB thinking that the problem might be with the drive. Unfortunately it wasnt. Repeated diagnoistics with TechTool Pro confirmed this.
Both the WD and Lacie I formatted in the same way, Journled with 2 partitions, 1 for the TM backup and another for media.
Please, any help anybody can give me will be greatly appreciated.
Also, Time Tracker doesn't seem to want to work on my machine...

I downloaded the Time Machine Buddy widget and this is what is showed for the last few backups:
Starting standard backup
Backing up to: /Volumes/Ajay's Time Machine/Backups.backupdb
No pre-backup thinning needed: 15.37 GB requested (including padding), 106.88 GB available
Copied 9501 files (11.5 GB) from volume Macintosh HD.
No pre-backup thinning needed: 694.4 MB requested (including padding), 95.37 GB available
Copied 9 files (93 bytes) from volume Macintosh HD.
Starting post-backup thinning
Deleted backup /Volumes/Ajay's Time Machine/Backups.backupdb/Ajay's MacBook/2011-04-16-183942: 102.34 GB now available
Deleted backup /Volumes/Ajay's Time Machine/Backups.backupdb/Ajay's MacBook/2011-04-16-173802: 102.34 GB now available
Post-back up thinning complete: 2 expired backups removed
Backup completed successfully.
Then this an hour later:
Starting standard backup
Backing up to: /Volumes/Ajay's Time Machine/Backups.backupdb
No pre-backup thinning needed: 694.4 MB requested (including padding), 102.34 GB available
Copied 150 files (53 KB) from volume Macintosh HD.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
Then this:
Starting standard backup
Backing up to: /Volumes/Ajay's Time Machine/Backups.backupdb
No pre-backup thinning needed: 694.4 MB requested (including padding), 102.34 GB available
Copied 150 files (53 KB) from volume Macintosh HD.
No pre-backup thinning needed: 694.3 MB requested (including padding), 102.34 GB available
Copied 9 files (93 bytes) from volume Macintosh HD.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.

Oracle 11G + Database Connection taking too much Time

Hi ,
I am using Oracle 11G . When i try to connect to oracle database
sqlplus system/impetus@database
it takes too much time ( more than 1 min )
I am not getting why this is happening ?
Before some day it was working fine but suddenly the problem occurred.. Is this issue is related to log files generated by oracle or memory related issue ( sga and pga)..
Any Help please ?

Darn! /tmp/capture.log does not contain what I expected it to contain.
So a different approach is needed.
issue the following command:
script /tmp/capture.log
#now you are in a new shell & issue the next 3 lines
strace sqlplus system/impetus@database
exit
Ctrl-d (Control D)
now issue the following commands.
ls -l /tmp/capture.log
wc -l /tmp/capture.log
Post the results from 2 commands above back here

Exchange 2010 DAG Replication - too much data crossing the wire

I’m replicating 3 Exchange databases from our production active Exchange 2010 server across the WAN to another passive Exchange 2010 server at our DR site.
The Exchange server at the DR site does not have any active databases, i.e. no users are hitting that server.
We are running Update Rollup 8 for Exchange Server 2010 SP1 on both these servers.
The two sites are connected via a 10Mb/s MPLS connection and all the databases are in sync and the replication is working fine.
I have setup a network sniffer at the primary site and see a sizable amount of data crossing the wire from the production Exchange server to the DR Exchange server.
When I query the production Exchange server using the Tracking Log explorer and only choose the EventID ‘RECEIVED’ that should show me the amount of data that has been committed to the database.
If I choose a date range that is the same exact range that I have used to capture the raw data with my sniffer the amount of data the sniffer shows crossing the wire is 10 fold compared to what the Tracking Log Explorer shows.
If I actually count up the data in the LOG files it is about 20% more than what is crossing the wire but that seems to be because the DAG is compressing the data.
If in a one hour timeframe there is 500MB of data crossing the wire to the DR Exchange server the tracking log explorer will show only 50MB.
I would like to know why the data crossing the wire far exceeds the amount of data that is truly being sent/received from the primary exchange server.
Perhaps I’m simply not getting a true view of the amount of data being committed to the exchange server using the Tracking Log Explorer.
Maybe there is a better way to report how much data is being committed to the exchange databases.
Any assistance would be appreciated…

Two things.
1 - you must update Exchange to SP3 and a recent RU. Willard has already provided the links, which point back to my blog if you want to see the lifecycle map for Exchange 2010. SP1 has been out of support since January 2013. Time to move
on pllease
2 - Looking at the tracking log is not sufficient. I would not expect that to show everything.
I want to know what traffic you see as excessive. What ports are you seeing used here?
My money is on content indexing. CI will use additional traffic over and above log repl traffic. Expect CI traffic to be roughly the same again. You can test this by disabling CI on the database or stopping the services on the DR server.
To disable the CI for the database:
Set-MailboxDatabase DBName -indexEnabled $False
Or stop the Exchange search services on the DR box to leave production unaffected.
Again - you need to update Exchange. You would be better to do that now rather than when something breaks and Microsoft support cannot fully assist you since you are not uptodate.    I'll leave discussion of the security issues resolved
in recent Exchange RUs aside.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

When my Bluetooth disconnects during a file transfer where is all the data? why do i have to start over?

while transfering a large video file from my phone to my imac i lost the bluetooth connection so where is all the data that was already transfered and how do i delete it?
can i pick up where it left off? if not why is it that i have to start over?
also it would be nice if the imac warned me of the file transfer when i try to put the computer to sleep. i put it to sleep out of habit right in the middle of a 3 hour transfer.

''FredMcD [[#answer-722558|said]]''
<blockquote>
In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers/letters, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.</blockquote>
They all have BP in front of them:
bp-d4ede524-e8fe-4683-afe1-3310c2150421
bp-6baa12d9-39d9-4bdf-b936-c900d2150421
<blockquote>You may have a corrupt '''cookies.sqlite''' file.
Type '''about:support''' in the address bar and press enter.
Under the page logo on the left side you will see '''Application Basics.'''
Under this find '''Profile Folder.''' To it’s right press the button
'''Show Folder.''' This will open your file browser to the current
Firefox profile. Now '''Close Firefox.'''
Locate the '''cookies.sqlite''' file. Then rename or delete it. Restart Firefox.
</blockquote>
The files listed are: cookies.sqlite cookies.sqlite.bak cookies.sqlite.bak-rebuild. I tried deleting the cookies.sqlite file but I think the cookies.sqlite.bak-rebuild rebuilds it. In any case when I reopened firefox It was the same I still have to sign in all the time.

File transfer using non-blocking sockets - data mysteriously vanish

Hello,
I need to pass some big amount of data using sockets. I my appliaction I have noticed that sometimes I didn't get all bytes. To check it out I wrote simple client + server to figure out what is happening. So:
- I have a sender and receiver application
- I'm trying to transfer 5MB text file.
- On receiver side, output file is never larget than 3MB
- If I put some timeout on sender side (1ms timeout between write operations) everything works fine.
Could someone tell me what I do wrong? Why data disappears and when? The same file transfered using old sockets goes always fine...
Thanks in advance!
Here is complete source for receiver and sender:
RECEIVER:
import java.io.FileOutputStream;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
public class ReceiverA {
      * @param args
     public static void main(String[] args) {
          String outputFile = "c:\\outputA.txt", host = "127.0.0.1";
          int port = 8001, bufferSize = 10240;
          try {
               ByteBuffer buffer = ByteBuffer.allocate(bufferSize);
               Selector selector = Selector.open();
               ServerSocketChannel server = ServerSocketChannel.open();
               server.configureBlocking(false);
               server.socket().bind(new InetSocketAddress(host, port));
               server.register(selector, SelectionKey.OP_ACCEPT);
               System.out.println("Server started");
               while(true)
                    selector.select();
                    Iterator<SelectionKey> iterator = selector.selectedKeys().iterator();
                    while (iterator.hasNext()) {
                         SelectionKey key = (SelectionKey) iterator.next();
                         iterator.remove();
                         if (key.isAcceptable()) {
                              SocketChannel client = server.accept();
                              client.configureBlocking(false);
                              client.register(selector, SelectionKey.OP_READ);
                              continue;
                         SocketChannel channel = (SocketChannel) key.channel();
                         int counter = 1;
                         if ( key.isReadable() ) {
                              FileOutputStream os = new FileOutputStream(outputFile);
                              int res;
                              do
                                   buffer.clear();
                                   res = channel.read(buffer);
                                   counter += res;
                                   System.out.println(res);
                                   buffer.flip();
                                   os.write(buffer.array(), 0, buffer.limit());
                              while( res >= 0 );
                              channel.close();
                              os.close();
                              System.out.println("Receiver: " + counter);
                              return;
          } catch (Exception e) {
               e.printStackTrace();
}SENDER:
import java.io.FileInputStream;
import java.io.IOException;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.util.Iterator;
public class SenderA {
     public static void main(String[] args) {
          String inputFile = "c:\\inputA.txt" , host = "127.0.0.1";
          int port = 8001, bufferSize = 10240;
          try {
               ByteBuffer buffer = ByteBuffer.allocate(bufferSize);
               byte[] byteArr = new byte[buffer.capacity()];
               Selector selector = Selector.open();
               SocketChannel connectionClient = SocketChannel.open();
               connectionClient.configureBlocking(false);
               connectionClient.connect(new InetSocketAddress(host, port));
               connectionClient.register(selector, SelectionKey.OP_CONNECT);
               while(true) {
                    selector.select();
                    Iterator<SelectionKey> iterator = selector.selectedKeys()
                              .iterator();
                    while (iterator.hasNext()) {
                         SelectionKey key = (SelectionKey) iterator.next();
                         iterator.remove();
                         SocketChannel client = (SocketChannel) key.channel();
                         if (key.isConnectable()) {
                              if (client.isConnectionPending()) {
                                   System.out.println("Trying to finish connection");
                                   try {
                                        client.finishConnect();
                                   } catch (IOException e) {
                                        e.printStackTrace();
                              client.register(selector, SelectionKey.OP_WRITE);
                              continue;
                         if(key.isWritable()) {
                              FileInputStream is = new FileInputStream(inputFile);
                              int res;
                              int counter = 0;
                              do
                                   buffer.clear();
                                   res = is.read(byteArr, 0, byteArr.length);
                                   System.out.println(res);
                                   if ( res == -1 ) break;
                                   counter += res;
                                   buffer.put(byteArr, 0, Math.min(res, buffer.limit()));
                                   buffer.flip();
                                   client.write(buffer);
                                    * When I remove comment file transfer goes OK!
                                   //Thread.sleep(1);
                              while( res != -1 );
                              client.close();
                              is.close();
                              System.out.println("Receiver: " + counter);
                              return;
          catch(Exception e) {
               e.printStackTrace();
}

There are at least two problems here.
A. In the receiver you should test for -1 from the read() immediately, rather than continue with the loop and try to write -1 bytes to the file.
B. In the sender you are ignoring the return value of client.write(), which can be anything from 0 to the buffer length. If you get 0 you should wait for another OP_WRITE to trigger; if you get a 'short write' you need to retry it until you've got nothing left to write from the current buffer, before you read any more data. This is where the data is vanishing.

Wrvs4400n file transfer connection trouble "Too Much Data"

Similar Messages

Maybe you are looking for