Wrvs4400n firmware 1.0.12 issue

I upgraded the firmware to 1.0.12 and immediately the wireless pc's loose their connection every so many minutes. It's like a cycle periodically dropping every 5 minutes or so. I don't know exactly how many minutes yet. The previous firmware version was 1.0.09 and everything worked fine. If anyone has any ideas, please help. thanks.

Hi, after upgrading the Firmware if the connection through the router is dropping then try to reset the router by holding and pressing the reset on the back panel for 30second. Then you can reconfigure the router again. This will resolve the issue of the connection being dropped.

Similar Messages

WRVS4400N firmware : V1.1.03 issues

first of all after i flashed it i did do a setup defaults as it says to do. so i started to setup my pppoe internet connections. well i apply my name and password click save. and i get NOTHING.. all it says is errors down on the bottom left of the page. running VISTA. latest windoz updates. running IE 7 obviously the work around i had to use seamonkey (mozilla product) to be able to get online.... 2nd my wpc300N with the latest driver installed NOW only connects at 130 Mb 5 feet from this same router. before it was @ 270 in the same place.

update, the router is kinda confusing under wireless > advanced security channel bandwidth says (Default: 20MHz) but when you click HELP it says "Channel Bandwidth You can select the channel bandwidth manually for Wireless-N connections. When it is set to 20MHz, only the 20MHz channel is used. When it is set to 40MHz, Wireless-N connections will use 40MHz channel but Wireless-B and Wireless-G will still use 20MHz channel. The default is Auto." which one is it ?

Firmware upgrade encountered an issue

Right now my Galaxy S3 is sitting at a screen that states "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." Whenever I power on my phone, I get that message. I've tried to do an Emergency Recovery in both Kies and Kies 3, but neither are able to recover, and the only way, it seems, to get the SRA is to plug my phone into my PC and get it from Autorun. Since my phone is not leaving the error screen, I don't get the auto run option to install the SRA. Is there any way to download it manually to get my phone running, or is it pretty much bricked and I'll have to look at replacement options?

I found a solution on the XDA forums site, but thanks anyway. Looks like I just needed to run the Software Repair Assistant, which I'm a little surprised that the Verizon store I went to didn't have it on hand to attempt to fix my phone. I got my device repaired, and it's working great. Just really wish my Wiimotes worked in Android 4.3.

WRVS4400N Firmware 1.1.03 problem

I recently updated my WRVS4400N firmware to 1.01.03. I use WPA-Personal with AES encryption security for my wireless laptops. I disabled Wireless SSID Broadcast and only allow my laptop MAC address to access my router. After I upgraded to 1.1.03 which is the latest firmware from Linksys.com. My wireless laptops drop session all the time. I rebuilt the client wireless profile did not help. Does anyone have the similar problem?
Brian

Yes, I reset several times and also reset it by holding the reset button at the back of the device several seconds without helping.

WRVS4400N - firmware issues and IPS signature update messages

On my WRVS4400N with Firmware Version: V1.1.03 I keep getting the message:
"Your Signature Version is beyond xxx days. Please Update it!"
Cisco/Linksys: about time to update the IPS signature, because I always have the latest available, but you don't update it anymore.
Besides: there are a lot of known issues with this router, but you don't provide us with a new firmware. OK, I did find a beta WRVS4400N_v1108.img on rapidshare, but is this really a Linksys beta? Why don't you publish updates anymore?
I am very disappointed by your service on this matter :-(
JJ (ICT dept 2500+ employees + Cisco user)

Hi Tom,
Last night I reset the setting to factory default, reinstalled firmware v2.0.2.1 and then restored my settings I backed up. Everything worked great after that but this morning it was down again. Same thing, no network and can't log into the router and forced to cycle the power.
As a "way out there" guess, are there any compatibility issues with certain switches? One thing I did change the past few days was that I took out an older cheap 8-port D-Link Gigabit switch which was maxed-out and replaced it with a Netgear ProSafe 16-port Gigabit switch (model JGS516).
Another thing that has changed is that I have added another network by cascading a D-Link DIR-655 wireless router. I have the WAN port of this router connected to a LAN port on the WRVS4400N router. The WRVS4400N router is using IP 192.168.21.x (subnet mask 255.255.255.0) and the other router is set to 192.169.10.x (subnet mask 255.255.255.0). I may be wrong but I can't see this being an issue. ANy ideas?

WRVS4400N firmware upgrade to 1.01.03, VPN no longer works

I recently upgraded to firmware version 1.01.03 for my WRVS4400N. I have been having several problems with IPSec tunnels on the previous firmware and was hoping this release would resolve those issues. To my surprise this firmware version seems to be much much worse. Now I cannot even connect my point-to-point ipsec tunnels at all. I'm using the exact same configuration I was using before (yes I restored from factory and recreated). Anybody else have this problem with this new firmware? I've about had it with Linksys and their horrible VPN solutions. Any help would be appreciated.
Router 1: WRVS4400N
Router 2: WRV200
VPN Solution: IPSec
Thanks

We experienced the exact same problem with two of our new WRVS4400N's. We foolishly upgrade the firmware before realizing that the documentation for this significant release had not been upgraded. In the software business if the documentation isn['t done the software should never be released. Not only does it frustrate the customers but it also stresses the support organzation. Had we read the release notes we would have realized we should have 1.) backed up the settings (which would allow us to downgrade the firmware if we didn't like it - which is where we are now), 2.) reset the router to factory settings 3.) rebuild the settings from scratch. Once we finally got help from India to do this we were ok - though the VPN tunnell does go down at least once or twice a day. More frustrating though is our constant inability throughout the day to access websites (no problem pinging websites). Only way to resolve this is to reboot the router - again several times a day. We are now committed to downgrading back to the original firmware.

WRVS4400N FTP Server Time-out Issue

I recently installed a Linksys WRVS4400N wireless router. After installing it, I began to experience an FTP connectivity issue. (I use Macromedia Dreamweaver to do my web site file transfers.) Although I can connect to my web servers and log in successfully, as soon as I attempt to transfer any files to the sites, I get a "Waiting for server..." error, and then eventually I lose the connection.
I tried disabling the firewall and IPS functions of the router, but that did not solve the problem. I then uninstalled the WRVS4400N and reinstalled my old Symantec Firewall Appliance 100, and FTP file transfers worked fine, as they had before. I then reinstalled the Linksys router, and the problem returned.
Obviously, the Lynksys device is causing this problem, but I can't figure why. Any suggestions would be appreciated.

Similar issue resolved this AM. When I called they already knew of the issue and I read some posts about updating to a beta firmware HOWEVER, they first instructed me to 1) re-download the firmware (encase of prior corrupted download) 2) backup my Settings 3) reflash the firmware 4) try FTP (which worked) 5) restore settings I was extremely dubious about this working, but low and behold, Filezilla is back up and running properly. I am rather surprised myself. Else just call, they already know of the issue.

Linksys WRVS4400N Firmware Bug!

i have problem whit my Firmware. I can not open all order of FTPs and i can`t Upload on a FTP and this of all Computers. Test: Cute FTP FileZilla Client SmartFTP Whats this for a bug? Its WDS coiming soon on WRVS4400N?

since it seams like you are having an issue with your firmware , you can perform a factory reset by holding in the button in on back of the router for 30 seconds, wait about 2 minutes and try to upgrade to the latest firmware.
Below is a link to help you with the firmware upgrade.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4030&p_created=11601...
Good Luck,
Ttech

WRVS4400N Firmware upgrade fails

I've trying to upgrade the Firmware of WRVS4400N from 2.0.0.9 to the newest 2.0.1.3. Backup setting, upload the new firmware in the webinterface. Everything ok. Then I wait almost an hour, but the router did not reboot and reconnect to the webinterface. Instead, the router blinking on "Power" an "Diag". So i try to reset the router at the reset button backsides. But nothing happens, also these lamps blinking. Also I cannot connect to the webinterface. What's going on here? How can I solve this problem?
Regards Göran

The 126401-02 patch is for Netra T2000 machines.
If you have a regular T2000, use the 126399-02 firmware patch

OPTIARC-AD7560A-D803.exe firmware and CRC/installation issues for DvD RW drive

Does anyone happen to know if the "OPTIARC-AD7560A-D803.exe" file is still available? If so, where?
The file seems necessary to correct issues with my DVD RW drive, which experiences unfounded CRC errors when I try to install certain software from CD.
The download link for this file was very easy to find on Lenovo's support website, but unfortunately the link produces what seems to be a 404 error or notice of discontinuation provided in cantonese.
I know I need this file- if it is no longer supported by Lenovo, is there any place where I can download either that file or some equivalent new firmware to end the CRC errors?
Thanks!
[email protected]
Solved!
Go to Solution.

Next day - Nevermind, for whatever reason I no longer get the odd message and was able to download the file easily. Thanks!

Iphone Ver 1.0 w/ new 2.0 firmware, anyone experience these issues?

I am hearing much about some of what I am getting ready to say, so here goes. Since the firmware update day debacle of July 11th and going forward i.e. it seems to be far from over,, the following seem to be the most consistent things happening on my Iphone, wether I reboot, shut off, restart, Sync w/ Macbook, re install, turn off all so called extras, uninstall a few of the 15 extra apps I have installed total from App store.
* Screen goes black during phone calls pretty consistent, cannot access keys, to
switch between calls when someone else calls in, or even hang up for that
matter.
* Very, painfully slow response to keys when touching now. Especially in Mail
and phone/addresses apps. Touch key,,, count to 15-20 and maybe the screen
reacts. Ridiculous!
* Constant App freezes, or kick outs back to OS when working with or playing
most any app that I have. Many I simply uninstalled for this reason. Too many
to list. DID THEY EVEN TEST THIS STUFF??
* In advertent reboots for no reason, when I slide the key to the on position to
get into the Iphone.
* Reboots/Resets, often take several minutes??
* When trying to install the few updates that are released to some of the apps, halfway to the umpteenth insertion of my password to install the same app, the updater crashes, thus I must start over??
* Battery life?? Whatever, twice a day recharges now, unless I turn **** near every working component off except the phone. WHATS THE POINT OF THE TERM UPGRADE??
* All of the above reminds me of one thing. The thing I'd thought I'd for the most part gotten away from in my life MS WINDOWS. This is a painful reminder of that. Anyone agree??
I'm sorry, I love Apple, and am likely a fanboy as much as anyone, but this has been ridiculous since July 10th. It's now the 25th. I know I am far from alone. This stuff is untested, unprepared, and APPLE is doing a poor job of acknowledging it. I have lost, important calls, data, and simply frustrated. Rather than brag to people about all the new cool stuff, I simply shut my mouth and keep it in my pocket, and hope it does not ring, so I do not have to bring it out, and possibly have another meltdown in front of someone.
Anyone here got better stories/points, in hopes that Apple even reads this stuff?

fbdklw wrote:
And now a year later compounded it with Mobile me roll out, IP3G, and 2.0 firmware across the U.S. and in 21 new countries?? H.E.L.L.O.!! Ever heard of a soft opening??
Yeah, sure would have been smarter of them to not do the 2.0 update and the 3G rollout simultaneously. I think many of the upgrade problems are server issues -- perhaps all, since many did succeed with no problems, suggesting that the OS is OK but the upgrade process failed for many.
Once such a process fails it's hard to recover. I once bricked a digital SLR by an abortive flash upgrade and had to take to the service center to get it fixed. I'd expect Apple to be able to undo iPhone problems, but maybe that's optimistic.
Phil

Nokia C3-00 Firmware V 08.63 issues

I updated my Nokia C3-00 to the latest firmware OTA. Now i am facing following issues.
1) The Memory Card seems to get corrupted every now and then. All the normal folders such as media,backup etc etc disappear. Then i have to format the card and reinsert it.
2) There are Messages in the Inbox (SMS) which has no title,no text but just show up blank.Cant delete them too as it throws error that " Error Occured.Deletion not completed".
Please guys solve these problems.
P.S. it would have been nice if the OS had the option to select multiple messages in Inbox.
Solved!
Go to Solution.

@ mindwork
Thanks a lot the message bug issue got solved but still i have problem with the log .. 2 empty entries r der unable to delete them tried backup restore everything but still dint work for me .. nokia should solve this in their next update.

E61i Firmware 2.0633 performance issues

Hi,
I upgraded my E61i firmware from 1.0633 to 2.0633. While I don't see any major "upgrades" in the system software my "Menu" option has become incredibly slow!
It now takes around 7-10 seconds for the Menu items to load when I press the Menu key. Also if I open a folder in MENU such as Installat. or Office or Tools etc it takes around 7-10 seconds for these load as well! It's really irritating.
Anybody else with a similar problem or a fix?

Hi there!
For all of you who still have performance issues with this firmware, make sure you have completed the following steps:
PLEASE NOTE: DO NOT TRY my solution if you don't have the IT skills and you don't know what you are doing. I'm not responsable to any damage caused to your phone while going through these steps.
1. After the update was done, restore your data to the phone using PCSuite. The annoying "Installing" message will appear.
2. Try to kill the process using TaskManager (you cand acces the task manager by pressing the Reject button and then holding the menu button), or wait 'till it says that the installation was unsuccesfull.
3. After the "Installation" is "done", go to the Installat. folder in your menu and verify all your applications, like a user said above. If nothing happens when try to start the app, remove it using de = button or by Options - Remove.
4. After you removed all your bad apps, go to App Manager. You'll see a list of apps with names like "a0000bg4.sis" under which the text "Not Installed" is present. Write down the full names of all the apps with the "Not installed" text under them.
5. Connect the phone to your PC using the "Data transfer" option. Use windows Search, and search for each name you listed on the paper at step 4. For each name, delete de .sis file and the two folders named after it. Example:
Name of the "Not installed" application: a0000bg4.sis
Search for: a0000bg4
Delete: a0000bg4.sis, a0000bg4 folder, a0000bg4_anything_here folder
6. After you deleted all the files for the "Not installed" apps, disconnect the phone from the PC and restart the phone.
7. After the restart, the "Installing" message should have be gone and the phone's menu speed back to normal.
8. Reinstall all your applications from scratch (Thanks for this one Nokia!)
Please note: i`m not responsable for any trouble or damage caused by anyone who tries my solution above to their phones. it's just and advice and if you don't have the knowledge, DO NOT TRY IT.

Removing newest SMC firmware (because of display issues)

Hi I have the 'flicker issue' and after some researching on the net and the many forums, i have come to the conclusion that the problem is because i installed the 1.1f5 smc firmware before the 1.0 (or 1.1?) at least it's worth a try to install in correct order so that's what i'm trying to do... BUT I can't figure out how to get my SMC version back to factory setting or back to 1.0?
can anyone help me reset/uninstall/restore my smc firmware?
also if i reset/uninstall/restore my smc firmware, will any data be lost? what about my boot camp windows partitition? will it be lost? or am i just not able to use it untill i get my firmware up to date again?
I've tried this 'firmware restoration thing' (http://www.apple.com/support/downloads/firmwarerestorationcdv10.html) but could not make it work... and i'm not even sure if it has anything to do with SMC firmware... or what excatly happens...
Thanks... I hope anyone can help or have som answers... everything here is welcome!
(sorry for the bad language... I'm Danish)
IMac 20'' Intel Mac OS X (10.4.7)

I would think that your flicker issue is most likely related to something else. As I recall (and if I recall correctly) there are two separate firmware updates - 1 for the SMC and one (the initial release) for the Boot ROM.
The intial Boot ROM firmware update was required to use Bootcamp beta/Windows XP (SP2). There is an updated version of the Boot ROM firmware (version 1.0.1) which runs on localized systems that use languages that read from right to left (my present Boot ROM is from the intial 1.0 release).
The SMC firmware update is suppose to address some boot related issues but I'm not sure what they are. Both will appear in your System Profiler's 'Hardware Overview'.
As for the Firmware Restoration CD, it is meant solely for recovery from an interrupted or failed attempt at updating - not reverting back after a successful one.

RE1000: 1. Firmware upgrade and strange issues. 2. WPS 'on' despite being clearly disabled

1. WPS shows 'on' in the RE1000's web status page even though it shows disabled in the wireless security page!
2. The unit seemed to be acting up multiple times ("attempting to connect" or whatever the exact message is) in the middle of both the firmware upgrade to 1.0.01 and the subsequent firmware downgrade to 1.0.00
Luckily it did NOT get bricked!
It also at times would just stop responding or redirect to to the erouter page, despite clearly being in the RE1000 web admin pages and clicking wireless survery links etc.!
Bizarre!
It may be that it needed rebooting / resetting, but it happened during the first upgrade.
3. It also said 'authentication / authorization failed' when I attempted to manually connect to my AP in the 'Site Survey' screen. However, when I then go to 'WLAN statistics' it shows Status: Associated anyway.
Bizarre!
Has anyone else seen any of this?

Mort wrote:
What is the make and the model number of your router? The RE1000 is meant to extend the range of an 802.11n network. If attempting to extend the signal for a traditional 802.11g router you will not achieve the desired performance because it is not optimized to extend standard 802.11G signals.
So if you are using n-technology router I suggest you to reconfigure the RE1000..
Here is the link for the configuration of the RE1000
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22045&userrole=Links...
Setting up your RE1000 using the setup CD
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1165f7b9a6fe4904bd7bf82eea32be0b_Setting_up_your_R...
I am using Linksys's own E4200 which is their current top of the line consumer router (802.11n 300 Mbps on 2.4 GHz and 450 MBps on 5 GHz).
Thanks for the suggestion, but my RE1000 has been configured perfectly since the beginning.
I also do not have WPS enabled (although the one screen says it is while the other setup screen clearly shows it is off) and other than the flashing light (and strange behavior / bugs), it works nicely as far as the actual intended functionality is concerned.
I had the same flashing light issue with my E4200 router, which Cisco finally acknowledged was an issue on their end (which I was convinced all along given how many others had the same exact issue) and which they fixed in the latest E4200 firmware (1.0.03) - see release notes.
I suspect the RE1000 has a similar code defect (bug) that happens under a specific set of circumstances (which explains why not all owners are affected).
Hopefully they will address it soon.

Wrvs4400n firmware 1.0.12 issue

Similar Messages

Maybe you are looking for